ProfitSpring | B2B PPC Agency

Grundfos Multibox With Unilift Cc7-a1 And 2 Hose 15 m - Pumpen - 97519841

Grundfos Unilift CC Pumps Are Single-stage Submersible Pumps With a Low Suction Ability Down to 3 mm Water Level. The Pumps Are Designed For Pumping Rainwater And Grey Wastewater, e.g. From Washing Machines, Baths, Sinks, Etc. From Low-lying Parts of Buildings up to Sewer Levelcellars or Buildings Prone to Floodingdraining Wellswells For Surface Water With Inlets From Roof Gutters, Pits, Tunnels, Etc.Swimming Pools, Ponds or Fountains.The Pumps Are Suitable For Both Stationary And Portable Use. They Are For Automatic Operation. The Pumps Allow Free Passage of Particles up to Ø10 mm. The Motor Incorporates Automatic Overload Protection Cutting Out The Motor in Case of Overload. When Cooled to Normal Temperature, The Motor Restarts Automatically. Technical: Maximum Particle Size: 10 mm Materials: Pump Housing: PP 15 GF Impeller: Ppom 20 GF Installation: Pump Outlet: 1.1/4 Maximum Installation Depth: 10 m Liquid: Pumped Liquid: Any Newtonian Liquid Liquid Temperature Range: 0 .. 40 °C Density: 998.2 Kg/m3 Electrical Data: Mains Frequency: 50 Hz Rated Voltage: 1 x 220-240 V Rated Current: 1.8 A Capacitor Size - Run: 8 F/450 V Enclosure Class (Iec 34-5): Ip68 Insulation Class (Iec 85): F Length of Cable: 10 m Type of Cable Plug: Schuko

EUR 604.77

1

Grundfos Float Switch Ms1 With 10m Cable - Pumpen - 96003332

Produktname: Schwimmerschalter Ms1 Mit 10m Kabelmaterialien:Gehäuse: Polypropylenflüssigkeit: Maximale Flüssigkeitstemperatur: 80 °Celektrische Daten:Schutzart (Iec 34-5): Ip68explosionssicherheit: Neinkabellänge: 10 Mkabeltyp: Tpk/pvc Andere:Nettogewicht :1,6 kg Bruttogewicht :2 kg Passt zu Folgenden Produkten :Lc108, Lcd108 Typ : Schwimmerschalter

EUR 154.57

1

Grundfos Unilift KP 150 A 1 Basement Pump - Pumpen - 011h1800

The Grundfos Unilift KP 150 A 1 Basement And Bilge Pump is a Vertical Single-stage Submersible Pump Made of Stainless Steel With a Vertical Outlet. The Pump Has an Inlet Strainer And Lifting Bracket And is Supplied With a 10 m Mains Cable And Float Switch For Automatic Start/stop. The Impeller is a Semi-open Impeller With a Free Passage of 10 mm Suitable For Pumping Groundwater, Surface Water, Rainwater And Similar Media. The Pump Has a Double Shaft Seal Consisting of Two Lip Seals With Grease in Between. The Outer Casing of The Pump Ensures Constant Cooling of The Motor by Means of The Pumped Medium. The Rotor Shaft Runs in Two Maintenance-free Carbon Bearings, Which Are Cooled by The Pumped Medium. The Motor is Filled With a Non-toxic Liquid.

EUR 364.45

1

Grundfos Mi301 - Pumpen - 98046408

Grundfos GO Mi301the Grundfos GO Remote is Used to Establish Wireless Connection to a Grundfos Product, Using a Standard Android or Ios Platform, With The Grundfos GO Remote App Installed. The App is Available From Apple App Store And Google Play Free of Charge.The MI 301 is a Module With Built-in Infrared And Radio Communication. It Must be Used in Conjunction With an Android or Ios-based Smartphone With Bluetooth Connection. The MI 301 Module Has Rechargeable Li-ion Battery And Must be Charged Separately.The Pump/system Can be Monitoried And Controlled From The Grundfos GO, And it Will be Possible to Create Pdf Reports. The Specific Functions Available Depend on Each Individual Product.Supplied With The Productgrundfos MI 301battery Chargerquickguide.Installation:Range of Ambient Temperature:70 .. -20 °Crelative Humidity:95 %Electrical Data:Maximum Current Consumption:0.03 Aenclosure Class (Iec 34-5):Ip40

EUR 303.30

1

Grundfos Alarm Unit With Lamp And Horn For Autoadapt - Pumpen - 97914944

Alarmgerät Mit Lampe Und Hupe Für Autoadapt

EUR 645.09

1

Grundfos Unilift Kp250-m-1 1x220-230v 50hz 10m Sch - Pumpen - 012h1300

Unilift KP 250 M 1submersible Drainage Pumpvertical Single-stage Stainless Steel Submersiblepump With Vertical Discharge Port And Integratedsubmersible 1-phase Canned Motor Ininsulation Class F With Thermal Overloadprotection. The Pump is Fitted With a Suction Strainer, Acarrying Handle And is Supplied With a 10 Mmains Cable.The Impeller is a Semi-open Impeller For 10 Mmfree Passage Suitable For Pumping Groundwater,Surface Water, Rain Water And Similar Liquids.The Pump Has a Double Shaft Seal Consisting Oftwo Lip Seals With Grease In-between.The Pump Has an Outer Casing Ensuring Continuouscooling of The Motor by The Pumped Liquid.The Rotor Shaft Operates in Two Maintenance-freecarbon Bearings Cooled by The Pumped Liquidthe Motor is Filled With a Non-toxic Motor Liquid.Liquid:Liquid Temperature Range:0 .. 50 °Ctechnical:Maximum Particle Size:10 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4031impeller:Aisi 304installation:Pump Outlet:Rp 1 1/4maximum Installation Depth:10 Melectrical Data:Power Input - P1:480 Wrated Voltage:1 x 220-230 Vrated Current:2.3 Acapacitor Size - Run:8 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug Schukoothers:Net Weight:7 Kggross Weight:7.3 Kgshipping Volume:0.013 m3

EUR 478.28

1

Grundfos Sololift2 Wc-1 - Pumpen - 97775314

Sololift2 Wc-1sololift2 Wc-1 is a Small, Compact Automatic Lifting Station Suitable For Pumping of Wastewater Off Places in Private Dwellings Where Wastewater Cannot be Led Directly to The Sewer by Means of a Natural Downward Slope.Sololift2 Wc-1 is Suitable For Pumping Wastewater From a Toilet Containing Toilet Paper And Faeces With an Additional Connection on The Lid For e.g. a Washbasin.The Pumping of Liquids Containing Other Material May Cause Faults And Limit The Scope of Our Guarantee.Sololift2 Wc-1 is Typically Used to Dewater: Toilet And Washbasin in Basements Below Sewer Level, in Connection With The Renovation or Modernisation of Existing Buildings, Where The Location May be Remote From The Main Soil Pipe so That a Natural Slope Cannot be Established.The Compact Lifting Station is Equipped With- Cable With or Without Plug (See Technical Data)- Horizontal or Vertical Fastening Possibility of Discharge Hose Connector With Several Adaptors For Pipes wi

EUR 580.40

1

Grundfos Submersible Pump Sqe 2-55 With 1.5 Meter Cable - Pumpen - 96510151

3 Mehrstufige, Tauchfähige Pumpe Für Die Wasserversorgung im Haushalt, Flüssigkeitstransfer in Tanks, Bewässerung Und Umweltanwendungen Konzipiert. Die Pumpe Verfügt Über Schwimmende Laufräder, Von Denen Jedes Ein Eigenes Wolframkarbid-/keramiklager Hat.

EUR 1194.53

1

Grundfos Unilift Kp350-a-1 1x220-240v 50hz 10m Sch - Pumpen - 013n1800

Unilift KP 350 A 1submersible Drainage Pumpvertical Single-stage Stainless Steel Submersiblepump With Vertical Discharge Port And Integratedsubmersible 1-phase Canned Motor Ininsulation Class F With Thermal Overloadprotection. The Pump is Fitted With Suction Strainer And Acarrying Handle And is Supplied With a 10 Mmains Cable And Float Switch For Automatic Startand Stop.The Impeller is a Semi-open Impeller For 10 Mmfree Passage Suitable For Pumping Groundwater,Surface Water, Rain Water And Similar Liquids.The Pump Has a Double Shaft Seal Consisting Oftwo Lip Seals With Grease In-between.The Pump Has an Outer Casing Ensuring Continuouscooling of The Motor by The Pumped Liquid.The Rotor Shaft Operates in Two Maintenance-freecarbon Bearings Cooled by The Pumped Liquid.The Motor is Filled With a Non-toxic Motor Liquid. Liquid:Liquid Temperature Range:0 .. 50 °Ctechnical:Maximum Particle Size:10 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4031impeller:Aisi 304installation:Pump Outlet:Rp 1 1/4maximum Installation Depth:10 Melectrical Data:Power Input - P1:700 Wrated Voltage:1 x 220-240 Vrated Current:3.2 Acapacitor Size - Run:8 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug: Schukoothers:Net Weight:8 Kggross Weight:8.3 Kgshipping Volume:0.013 m3

EUR 763.70

1

Grundfos Unilift ap 35b 50.06.1v 1x230v 10m Sch - Pumpen - 96004563

Unilift Ap35b.50.06.1.Vsubmersible Effluent Pumpvertical Single-stage Stainless Steel Submersiblepump With Integrated Submersible 1-phasemotor. The Pump is Fitted With Ring Stand And Carryinghandle And is Supplied With a 10 m Mainscable. The Impeller is a Vortex Impeller For35 mm Free Passage Suitable For Pumpingsurface Water, Groundwater, Wastewater Andsimilar.The Pump Has a Double Shaft Seal And Anintermediate Oil Chamber Pre-filled With Non-toxicspecial Oil. The Motor is Insulation Class F With Thermaloverload Protection And Has Long-life Deep-groovegreased-for-life Ball Bearings.The Pump Has R 2' Discharge Port And Isready For Installation Either Free-standing Oron an Auto-coupling System.Liquid:Maximum Liquid Temperature:40 °Ctechnical:Type of Impeller:Vortexmaximum Particle Size:35 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Pump Outlet:R 2'maximum Installation Depth:7 Melectrical Data:Type of Motor:Pscpower Input - P1:1 Kwrated Voltage:1 x 230 Vrated Current:4.6 Acos Phi - Power Factor:0,98rated Speed:2810 Rpmcapacitor Size - Run:16 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug:Schukoothers:Net Weight:9.82 kg

EUR 816.41

1

Grundfos Unilift ap 12.40.04 a1 1x230v 10m Sch - Pumpen - 96011018

Unilift Ap12.40.04.A1submersible Drainage Pump Typevertical Single-stage Stainless Steel Submersiblepump With Vertical Discharge Port And Integratedsubmersible 1-phase Totally Enclosed Motorin Insulation Class F With Thermal Overloadprotection. The Pump is Fitted With Suction Strainer And Level Switch For Automatic Start And Stop.The Impeller is a Semi Open Impeller For12 mm Free Passage Suitable For Pumpinggroundwater, Surface Water, Rain Water Andsimilar.The Pump Has a Double Shaft Seal And Anintermediate Oil Chamber Pre-filled With Non-toxicspecial Oil.The Pump Has a Riser Pipe, a Cooling Jacket For Continuous Cooling of The Motor by The Pumped Liquid And Long-life Deep-groove Greased-for-life Ball Bearings.The Pump is Ready For Use as it is Fitted Withcarrying Handle And is Supplied With A10 m Mains Cable. The Mains Cable is Ofthe Plug Type With Glass Sealing Compound in Thesocket to Prevent Penetration of Humidity Intothe Stator Windings.Liquid:Liquid Temperature Range:0 .. 55 °Ctechnical:Type of Impeller:Semi Openmaximum Particle Size:12 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Pump Outlet:Rp 1 1/2maximum Installation Depth:10 Melectrical Data:Type of Motor:Pscpower Input - P1:0.7 Kwrated Voltage:1 x 230 Vrated Current:3 Acos Phi - Power Factor:0,99rated Speed:2770 Rpmcapacitor Size - Run:12 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug: Schukoothers:Net Weight:11 Kggross Weight:11.5 kg

EUR 1114.22

1

Grundfos Unilift ap 35.40.06 A1v 1x230v 10m Sch - Pumpen - 96010982

Unilift Ap35.40.06.A1.Vsubmersible Drainage Pump Typevertical Single-stage Stainless Steel Submersiblepump With Vertical Discharge Port And Integratedsubmersible 1-phase Totally Enclosed Motorin Insulation Class F With Thermal Overloadprotection. The Pump is Fitted With Suction Strainer And Level Switch For Automatic Start And Stop.The Impeller is a Vortex Impeller For35 mm Free Passage Suitable For Pumpinggroundwater, Surface Water, Rain Water Andsimilar.The Pump Has a Double Shaft Seal And Anintermediate Oil Chamber Pre-filled With Non-toxicspecial Oil.The Pump Has a Riser Pipe, a Cooling Jacket For Continuous Cooling of The Motor by The Pumped Liquid And Long-life Deep-groove Greased-for-life Ball Bearings.The Pump is Ready For Use as it is Fitted Withcarrying Handle And is Supplied With A10 m Mains Cable. The Mains Cable is Ofthe Plug Type With Glass Sealing Compound in Thesocket to Prevent Penetration of Humidity Intothe Stator Windings.Liquid:Liquid Temperature Range:0 .. 55 °Ctechnical:Type of Impeller:Vortexmaximum Particle Size:35 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Pump Outlet:Rp 1 1/2maximum Installation Depth:10 Melectrical Data:Type of Motor:Pscpower Input - P1:0.9 Kwrated Voltage:1 x 230 Vrated Current:4 Acos Phi - Power Factor:0,97rated Speed:2810 Rpmcapacitor Size - Run:16 F/400 Venclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:10 Mtype of Cable Plug Schukoothers:Net Weight:11.4 Kggross Weight:11.9 kg

EUR 1173.88

1

Grundfos Unilift ap 50b 50.11.3 v 3x400v 5m no Plug - Pumpen - 96004601

Unilift Ap50b.50.11.3.Vsubmersible Effluent Pumpvertical Single-stage Stainless Steel Submersiblepump With Integrated Submersible 3-phasemotor. The Pump is Fitted With Ring Stand And Carryinghandle And is Supplied With a 5 m Mainscable. The Impeller is a Vortex Impeller For50 mm Free Passage Suitable For Pumpingsurface Water, Groundwater, Wastewater Andsimilar.The Pump Has a Double Shaft Seal And Anintermediate Oil Chamber Pre-filled With Non-toxicspecial Oil. The Motor is Insulation Class F And Has Long-life Deep-groove Greased-for-life Ball Bearings.The Pump Has R 2' Discharge Port And is Readyfor Installation Either Free-standing or on Anauto-coupling System. Liquid:Maximum Liquid Temperature:40 °Ctechnical:Type of Impeller:Vortexmaximum Particle Size:50 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Pump Outlet:R 2'maximum Installation Depth:7 Melectrical Data:Power Input - P1:1.75 Kwrated Voltage:3 x 400 Vrated Current:2.81 Acos Phi - Power Factor:0,90rated Speed:2785 Rpmenclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:5 Mtype of Cable Plug:Noneothers:Net Weight:10.6 kg

EUR 1851.72

1

Grundfos Unilift ap 35b 50.06.3v 3x400v 5m Noplug - Pumpen - 96004565

Unilift Ap35b.50.06.3.Vsubmersible Effluent Pumpvertical Single-stage Stainless Steel Submersiblepump With Integrated Submersible 3-phasemotor. The Pump is Fitted With Ring Stand And Carryinghandle And is Supplied With a 5 m Mainscable. The Impeller is a Vortex Impeller For35 mm Free Passage Suitable For Pumpingsurface Water, Groundwater, Wastewater Andsimilar.The Pump Has a Double Shaft Seal And Anintermediate Oil Chamber Pre-filled With Non-toxicspecial Oil. The Motor is Insulation Class F And Has Long-life Deep-groove Greased-for-life Ball Bearings.The Pump Has R 2' Discharge Port And is Readyfor Installation Either Free-standing or on Anauto-coupling System. Liquid:Maximum Liquid Temperature:40 °Ctechnical:Type of Impeller:Vortexmaximum Particle Size:35 Mmmaterials:Pump Housing:Stainless Steelpump Housing:Din W.-Nr. 1.4301pump Housing:Aisi 304impeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Pump Outlet:R 2'maximum Installation Depth:7 Melectrical Data:Power Input - P1:1 Kwrated Voltage:3 x 400 Vrated Current:1.55 Acos Phi - Power Factor:0,89rated Speed:2830 Rpmenclosure Class (Iec 34-5):Ip68insulation Class (Iec 85):Flength of Cable:5 Mtype of Cable Plug:Noneothers:Net Weight:8.22 kg

EUR 1600.01

1

Grundfos Magna3 25-80 Cirkulating Pump 180 mm - Pumpen - 97924246

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1021.76

1

Grundfos Magna3 25-100 Cirkulating Pump 180 mm - Pumpen - 97924247

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1050.67

1

Grundfos Magna3 32-100 Cirkulating Pump 180 mm - Pumpen - 97924257

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1087.78

1

Grundfos Magna3 65-60 f 340 1x230v Pn6/10 - Pumpen - 97924295

Magna3 65-60 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remote

EUR 4014.27

1

Grundfos Magna3 50-60 f 240 1x230v Pn6/10 - Pumpen - 97924281

Magna3 50-60 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remote

EUR 2578.37

1

Grundfos Magna3 32-120 f 220 1x230v Pn6/10 - Pumpen - 97924259

Magna3 32-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1906.04

1

Grundfos Magna3 25-40n Cirkulating Pump 180 mm - Pumpen - 97924336

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 2019.01

1

Grundfos Magna3 25-60 Cirkulating Pump 180 mm - Pumpen - 97924245

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 757.43

1

Grundfos Magna3 32-60 Cirkulating Pump 180 mm - Pumpen - 97924255

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 993.37

1

Grundfos Magna3 65-120 f 340 1x230v Pn6/10 - Pumpen - 97924298

Magna3 65-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 3863.18

1

Grundfos Magna3 25-40 Cirkulating Pump 180 mm - Pumpen - 97924244

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 781.79

1

Marke

Farbe

Händler

Preis (EUR)