65 Ergebnisse (0,18988 Sekunden)

Alle Filter anzeigen

Marke

Farbe

Händler

Preis (EUR)

Alles anzeigen

Filter zurücksetzen

Produkte
Von
Shops

Salus Circulation Pump Ep15-40-130 - Pumpen

Salus Circulation Pump Ep15-40-130 - Pumpen

Salus EP Electronic A-class Circulation Pump For Heating Systems And Other Non-corrosive Liquids, Ensuring High Comfort And Low Energy Consumption.The EP Circulation Pump is Mainly Used For Water Circulation in Home Heating, And is Best Suited For The Following System: Stable Heating System With Variable Flow Heating System With Variable Pipeline Temperature Industrial Circulation System House And Apartment Heating Systemsthe EP Circulation Pump Can Adjust The Electric Pump's Performance Automatically And Continuously to Meet The Actual Needs of The Systemthe EP Circulation Pump is Equipped With a Control Panel on The Front, Which is Convenient For Users.? Easy Installation And Startupep Circulation Pump Has Automatic Adaptation Mode Auto (Factory Setting). In Most Cases, You Can Start The Pump Without Making Any Adjustments And Let it Automatically Adjust to Meet The Actual Needs of The System.? High Comfortthe Operating Noise of The Pump is Low.? Low Energy Consumptioncompared to The Conventional Circulation Pump, Its Energy Consumption is Very Low. The Minimum Energy Consumption For The EP Circulation Pump Can Reach 5 W.EP Circulation Pump Does Not Need External Motor Protection. Check Whether The Voltage And Frequency of The Power Supply Correspond to The Parameters Indicated on The Pump Nameplate. Use The Pump's Corresponding Connector to Connect The Power Supply (Epplug).

EUR 178.60
1

Salus Circulation Pump Ep15-60-130 - Pumpen

Salus Circulation Pump Ep15-60-130 - Pumpen

Salus EP Electronic A-class Circulation Pump For Heating Systems And Other Non-corrosive Liquids, Ensuring High Comfort And Low Energy Consumption.The EP Circulation Pump is Mainly Used For Water Circulation in Home Heating, And is Best Suited For The Following System: Stable Heating System With Variable Flow Heating System With Variable Pipeline Temperature Industrial Circulation System House And Apartment Heating Systemsthe EP Circulation Pump Can Adjust The Electric Pump's Performance Automatically And Continuously to Meet The Actual Needs of The Systemthe EP Circulation Pump is Equipped With a Control Panel on The Front, Which is Convenient For Users.? Easy Installation And Startupep Circulation Pump Has Automatic Adaptation Mode Auto (Factory Setting). In Most Cases, You Can Start The Pump Without Making Any Adjustments And Let it Automatically Adjust to Meet The Actual Needs of The System.? High Comfortthe Operating Noise of The Pump is Low.? Low Energy Consumptioncompared to The Conventional Circulation Pump, Its Energy Consumption is Very Low. The Minimum Energy Consumption For The EP Circulation Pump Can Reach 5 W.EP Circulation Pump Does Not Need External Motor Protection. Check Whether The Voltage And Frequency of The Power Supply Correspond to The Parameters Indicated on The Pump Nameplate. Use The Pump's Corresponding Connector to Connect The Power Supply (Epplug).

EUR 184.75
1

Salus Floor Heating Manifold 5 Slings - Fussbodenheizung - Gvm 5

Salus Floor Heating Manifold 5 Slings - Fussbodenheizung - Gvm 5

Salus Gvm Underfloor Heating Manifold is a High Flow Distributor With Manual Balancing of Each Circuit.Each Valve Has a Built-in Manual Flow Control Which is Very Easy to Adjust. Instructions For Balancing The Circuit Can be Found in The Distributor Box.The Salus Gvm Manifold Has a Manual Vent on Each Pipe And a Drain Valve With 1/2 Thread For Hose. The Inlet- And Return- Connection is 1 Thread, And The Thread For The Actuators Are 30 x 1.5 Mmcontains:Stainless Steel Distributor Set With Valveeurokonus For 20 mm Pexventilation Valve on Inlet And Returnswivel Filling And Drain Valvemounting Bracket For Wall Mountingwith Individual Room Temperature Control.Salus Gvm Underfloor Heating Distributors Can be Supplied With Salus Wireless Control.Properties of Salus Underfloor Heating Manifold:Available With Salus Insulation in Form-stable Epp.Meets The Installation Requirements For Insulation Standard DS 452.Can be Used With Water / Glycol Mixtures With a Mixing Ratio of up to 30%.Euroconus Are Included For All Inlets And Outlets For 20 mm Pex / Pe-rt Pipe.Ready For Wall Mounting.Can be Integrated Into The Salus Smart Home Solution.Can be Operated Directly From The Room Thermostat And From The Mobile Phone, Tablet or Computer.The Distribution Pipes Are Made of Stainless Steel Alloy Aisi304 L Premium Quality And Extruded in Dimension 1 For Optimal Distribution And Minimum Pressure Drop.Maximum Working Pressure: 6 Barmaximum Proofing Pressure: 10 Bar

EUR 232.37
1

Salus Floor Heating Manifold 4 Slings - Fussbodenheizung - Gvm 4

Salus Floor Heating Manifold 4 Slings - Fussbodenheizung - Gvm 4

Salus Gvm Underfloor Heating Manifold is a High Flow Distributor With Manual Balancing of Each Circuit.Each Valve Has a Built-in Manual Flow Control Which is Very Easy to Adjust. Instructions For Balancing The Circuit Can be Found in The Distributor Box.The Salus Gvm Manifold Has a Manual Vent on Each Pipe And a Drain Valve With 1/2 Thread For Hose. The Inlet- And Return- Connection is 1 Thread, And The Thread For The Actuators Are 30 x 1.5 Mmcontains:Stainless Steel Distributor Set With Valveeurokonus For 20 mm Pexventilation Valve on Inlet And Returnswivel Filling And Drain Valvemounting Bracket For Wall Mountingwith Individual Room Temperature Control.Salus Gvm Underfloor Heating Distributors Can be Supplied With Salus Wireless Control.Properties of Salus Underfloor Heating Manifold:Available With Salus Insulation in Form-stable Epp.Meets The Installation Requirements For Insulation Standard DS 452.Can be Used With Water / Glycol Mixtures With a Mixing Ratio of up to 30%.Euroconus Are Included For All Inlets And Outlets For 20 mm Pex / Pe-rt Pipe.Ready For Wall Mounting.Can be Integrated Into The Salus Smart Home Solution.Can be Operated Directly From The Room Thermostat And From The Mobile Phone, Tablet or Computer.The Distribution Pipes Are Made of Stainless Steel Alloy Aisi304 L Premium Quality And Extruded in Dimension 1 For Optimal Distribution And Minimum Pressure Drop.Maximum Working Pressure: 6 Barmaximum Proofing Pressure: 10 Bar

EUR 348.44
1

Salus Floor Heating Manifold 11 Slings - Fussbodenheizung - Gvm 11

Salus Floor Heating Manifold 11 Slings - Fussbodenheizung - Gvm 11

Salus Gvm Underfloor Heating Manifold is a High Flow Distributor With Manual Balancing of Each Circuit.Each Valve Has a Built-in Manual Flow Control Which is Very Easy to Adjust. Instructions For Balancing The Circuit Can be Found in The Distributor Box.The Salus Gvm Manifold Has a Manual Vent on Each Pipe And a Drain Valve With 1/2 Thread For Hose. The Inlet- And Return- Connection is 1 Thread, And The Thread For The Actuators Are 30 x 1.5 Mmcontains:Stainless Steel Distributor Set With Valveeurokonus For 20 mm Pexventilation Valve on Inlet And Returnswivel Filling And Drain Valvemounting Bracket For Wall Mountingwith Individual Room Temperature Control.Salus Gvm Underfloor Heating Distributors Can be Supplied With Salus Wireless Control.Properties of Salus Underfloor Heating Manifold:Available With Salus Insulation in Form-stable Epp.Meets The Installation Requirements For Insulation Standard DS 452.Can be Used With Water / Glycol Mixtures With a Mixing Ratio of up to 30%.Euroconus Are Included For All Inlets And Outlets For 20 mm Pex / Pe-rt Pipe.Ready For Wall Mounting.Can be Integrated Into The Salus Smart Home Solution.Can be Operated Directly From The Room Thermostat And From The Mobile Phone, Tablet or Computer.The Distribution Pipes Are Made of Stainless Steel Alloy Aisi304 L Premium Quality And Extruded in Dimension 1 For Optimal Distribution And Minimum Pressure Drop.Maximum Working Pressure: 6 Barmaximum Proofing Pressure: 10 Bar

EUR 684.27
1

Salus Floor Heating Manifold 3 Slings - Fussbodenheizung - Gvm 3

Salus Floor Heating Manifold 3 Slings - Fussbodenheizung - Gvm 3

Salus Gvm Underfloor Heating Manifold is a High Flow Distributor With Manual Balancing of Each Circuit.Each Valve Has a Built-in Manual Flow Control Which is Very Easy to Adjust. Instructions For Balancing The Circuit Can be Found in The Distributor Box.The Salus Gvm Manifold Has a Manual Vent on Each Pipe And a Drain Valve With 1/2 Thread For Hose. The Inlet- And Return- Connection is 1 Thread, And The Thread For The Actuators Are 30 x 1.5 Mmcontains:Stainless Steel Distributor Set With Valveeurokonus For 20 mm Pexventilation Valve on Inlet And Returnswivel Filling And Drain Valvemounting Bracket For Wall Mountingwith Individual Room Temperature Control.Salus Gvm Underfloor Heating Distributors Can be Supplied With Salus Wireless Control.Properties of Salus Underfloor Heating Manifold:Available With Salus Insulation in Form-stable Epp.Meets The Installation Requirements For Insulation Standard DS 452.Can be Used With Water / Glycol Mixtures With a Mixing Ratio of up to 30%.Euroconus Are Included For All Inlets And Outlets For 20 mm Pex / Pe-rt Pipe.Ready For Wall Mounting.Can be Integrated Into The Salus Smart Home Solution.Can be Operated Directly From The Room Thermostat And From The Mobile Phone, Tablet or Computer.The Distribution Pipes Are Made of Stainless Steel Alloy Aisi304 L Premium Quality And Extruded in Dimension 1 For Optimal Distribution And Minimum Pressure Drop.Maximum Working Pressure: 6 Barmaximum Proofing Pressure: 10 Bar

EUR 216.50
1

Salus Floor Heating Manifold 8 Slings - Fussbodenheizung - Gvm 8

Salus Floor Heating Manifold 8 Slings - Fussbodenheizung - Gvm 8

Salus Gvm Underfloor Heating Manifold is a High Flow Distributor With Manual Balancing of Each Circuit.Each Valve Has a Built-in Manual Flow Control Which is Very Easy to Adjust. Instructions For Balancing The Circuit Can be Found in The Distributor Box.The Salus Gvm Manifold Has a Manual Vent on Each Pipe And a Drain Valve With 1/2 Thread For Hose. The Inlet- And Return- Connection is 1 Thread, And The Thread For The Actuators Are 30 x 1.5 Mmcontains:Stainless Steel Distributor Set With Valveeurokonus For 20 mm Pexventilation Valve on Inlet And Returnswivel Filling And Drain Valvemounting Bracket For Wall Mountingwith Individual Room Temperature Control.Salus Gvm Underfloor Heating Distributors Can be Supplied With Salus Wireless Control.Properties of Salus Underfloor Heating Manifold:Available With Salus Insulation in Form-stable Epp.Meets The Installation Requirements For Insulation Standard DS 452.Can be Used With Water / Glycol Mixtures With a Mixing Ratio of up to 30%.Euroconus Are Included For All Inlets And Outlets For 20 mm Pex / Pe-rt Pipe.Ready For Wall Mounting.Can be Integrated Into The Salus Smart Home Solution.Can be Operated Directly From The Room Thermostat And From The Mobile Phone, Tablet or Computer.The Distribution Pipes Are Made of Stainless Steel Alloy Aisi304 L Premium Quality And Extruded in Dimension 1 For Optimal Distribution And Minimum Pressure Drop.Maximum Working Pressure: 6 Barmaximum Proofing Pressure: 10 Bar

EUR 340.23
1

Salus Floor Heating Manifold 12 Slings - Fussbodenheizung - Gvm 12

Salus Floor Heating Manifold 12 Slings - Fussbodenheizung - Gvm 12

Salus Gvm Underfloor Heating Manifold is a High Flow Distributor With Manual Balancing of Each Circuit.Each Valve Has a Built-in Manual Flow Control Which is Very Easy to Adjust. Instructions For Balancing The Circuit Can be Found in The Distributor Box.The Salus Gvm Manifold Has a Manual Vent on Each Pipe And a Drain Valve With 1/2 Thread For Hose. The Inlet- And Return- Connection is 1 Thread, And The Thread For The Actuators Are 30 x 1.5 Mmcontains:Stainless Steel Distributor Set With Valveeurokonus For 20 mm Pexventilation Valve on Inlet And Returnswivel Filling And Drain Valvemounting Bracket For Wall Mountingwith Individual Room Temperature Control.Salus Gvm Underfloor Heating Distributors Can be Supplied With Salus Wireless Control.Properties of Salus Underfloor Heating Manifold:Available With Salus Insulation in Form-stable Epp.Meets The Installation Requirements For Insulation Standard DS 452.Can be Used With Water / Glycol Mixtures With a Mixing Ratio of up to 30%.Euroconus Are Included For All Inlets And Outlets For 20 mm Pex / Pe-rt Pipe.Ready For Wall Mounting.Can be Integrated Into The Salus Smart Home Solution.Can be Operated Directly From The Room Thermostat And From The Mobile Phone, Tablet or Computer.The Distribution Pipes Are Made of Stainless Steel Alloy Aisi304 L Premium Quality And Extruded in Dimension 1 For Optimal Distribution And Minimum Pressure Drop.Maximum Working Pressure: 6 Barmaximum Proofing Pressure: 10 Bar

EUR 670.71
1