30 Ergebnisse (0,16066 Sekunden)

Alle Filter anzeigen

Marke

Farbe

Händler

Preis (EUR)

Filter zurücksetzen

Produkte
Von
Shops

Viega Easytop Ball Valve 18 mm x 1/2" Gunmetal - Armaturen - 746766

Viega Easytop Ball Valve 18 mm x 1/2" Gunmetal - Armaturen - 746766

Easytop Ball Valve With Sc-contur- Press Connection, Rp-threadscomponents Valve Casing in Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Stainless Steel Ball, Actuation Lever T-form With Medium Marking Green/red Exchangeable, Epdm Sealing Element.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °C With Dvgw-test Markdn: 15, d: 18, Rp: 12

EUR 31.74
1

Viega Easytop Ball Valve 22 mm x 3/4" Gunmetal - Armaturen - 746773

Viega Easytop Ball Valve 22 mm x 3/4" Gunmetal - Armaturen - 746773

Easytop Ball Valve With Sc-contur- Press Connection, Rp-threadscomponents Valve Casing in Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Stainless Steel Ball, Actuation Lever T-form With Medium Marking Green/red Exchangeable, Epdm Sealing Element.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °C With Dvgw-test Markdn: 20, d: 22, Rp: 34

EUR 39.11
1

Viega Easytop Ball Valve Nipple/nipple 1" Gunmetal - Armaturen - 746957

Viega Easytop Ball Valve Nipple/nipple 1" Gunmetal - Armaturen - 746957

Easytop Ball Valve- G-threadcomponentsvalve Casing Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, With Cylindrical G-thread in Accordance With Iso 228 For Flat Sealing Screw Fittings, Maintenance-free Selector Shaft, Stainless Steel Ball, Actuation Lever T-form With Medium Marking Green/red Exchangeable.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °Cwith Dvgw-test Mark DN: 20, G: 1

EUR 41.51
1

Viega Sealing Flange 130 x 40 x 0.8 mm - Pex Systeme - 688417

Viega Sealing Flange 130 x 40 x 0.8 mm - Pex Systeme - 688417

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xcdimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xcflexible, Blackdimensionspress Connectors And Pipesraxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installationsoperating Temperature Max. 70 °Coperating Pressure Max. 1.0 Mpaheating Installationsoperating Temperature Max. 80 °Coperating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 24.86
1

Viega Raxofix Bend 45° 25 Gunmetal / Glossy - Alu Pex Systeme - 647070

Viega Raxofix Bend 45° 25 Gunmetal / Glossy - Alu Pex Systeme - 647070

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xcdimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xcflexible, Blackdimensionspress Connectors And Pipesraxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installationsoperating Temperature Max. 70 °Coperating Pressure Max. 1.0 Mpaheating Installationsoperating Temperature Max. 80 °Coperating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 20.81
1

Viega Raxofix Bend 90° 40 Gunmetal / Glossy - Alu Pex Systeme - 647049

Viega Raxofix Bend 90° 40 Gunmetal / Glossy - Alu Pex Systeme - 647049

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xcdimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xcflexible, Blackdimensionspress Connectors And Pipesraxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installationsoperating Temperature Max. 70 °Coperating Pressure Max. 1.0 Mpaheating Installationsoperating Temperature Max. 80 °Coperating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 42.10
1

Viega Coupling PB 16 mm Gunmetal - Pex Systeme - 700003

Viega Coupling PB 16 mm Gunmetal - Pex Systeme - 700003

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xcdimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xcflexible, Blackdimensionspress Connectors And Pipesraxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installationsoperating Temperature Max. 70 °Coperating Pressure Max. 1.0 Mpaheating Installationsoperating Temperature Max. 80 °Coperating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 23.72
1

Viega Raxofix Bend 90° 32 Gunmetal / Glossy - Alu Pex Systeme - 647032

Viega Raxofix Bend 90° 32 Gunmetal / Glossy - Alu Pex Systeme - 647032

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xcdimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xcflexible, Blackdimensionspress Connectors And Pipesraxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installationsoperating Temperature Max. 70 °Coperating Pressure Max. 1.0 Mpaheating Installationsoperating Temperature Max. 80 °Coperating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 22.68
1

Viega Prestabo Bend 45° 54 Steel/galvanized 558321 - Druckrohre Und Armaturen

Viega Prestabo Bend 45° 54 Steel/galvanized 558321 - Druckrohre Und Armaturen

Press Connector Systems With Press Connectors And Pipes Made of Non-alloy Steel 1.0308 (E235), in Acc. With EN 10305-3, Externally Galvanised With a Zinc Layer Thickness of 8-15 m (Blue Chromatised).Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markingred Symbol (to Prevent Confusion With Sanpress Inox (Stainless Steel) Articles) »Not For Drinking Water Installations«Sealing Elementsepdm, Black (Ethylene-propylene-dien-monomer Rubber),Not Resistant Against Hydrocarbon Solvent, Chlorinated Hydrocarbon Solvents, Turpentine, Petrol, Fkm, Dull Blackdimensionsd38

EUR 25.82
1

Viega Prestabo Bend 45° 42 Steel/galvanized 558314 - Druckrohre Und Armaturen

Viega Prestabo Bend 45° 42 Steel/galvanized 558314 - Druckrohre Und Armaturen

Press Connector Systems With Press Connectors And Pipes Made of Non-alloy Steel 1.0308 (E235), in Acc. With EN 10305-3, Externally Galvanised With a Zinc Layer Thickness of 8-15 m (Blue Chromatised).Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markingred Symbol (to Prevent Confusion With Sanpress Inox (Stainless Steel) Articles) »Not For Drinking Water Installations«Sealing Elementsepdm, Black (Ethylene-propylene-dien-monomer Rubber),Not Resistant Against Hydrocarbon Solvent, Chlorinated Hydrocarbon Solvents, Turpentine, Petrol, Fkm, Dull Blackdimensionsd38

EUR 20.03
1

Viega Sanpress Inox Transition Fitting 22 x 3/4" Stainless Steel/bright 437503 - Druckrohre Und Armaturen

Viega Sanpress Inox Transition Fitting 22 x 3/4" Stainless Steel/bright 437503 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 33.47
1

Viega Sanpress Inox Bend 45° 42 Stainless Steel/bright 435431 - Druckrohre Und Armaturen

Viega Sanpress Inox Bend 45° 42 Stainless Steel/bright 435431 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 40.32
1

Viega Sanpress Bend 45° 22 Gunmetal/glossy 112004 - Druckrohre Und Armaturen

Viega Sanpress Bend 45° 22 Gunmetal/glossy 112004 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 21.20
1

Viega Sanpress Bend 45° 22 Gunmetal/glossy 110949 - Druckrohre Und Armaturen

Viega Sanpress Bend 45° 22 Gunmetal/glossy 110949 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 20.82
1

Viega Sanpress Bend 90° 35 Gunmetal/glossy 111953 - Druckrohre Und Armaturen

Viega Sanpress Bend 90° 35 Gunmetal/glossy 111953 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 36.57
1

Viega Sanpress Inox Transition Fitting 22 x 3/4" Stainless Steel/bright 438302 - Druckrohre Und Armaturen

Viega Sanpress Inox Transition Fitting 22 x 3/4" Stainless Steel/bright 438302 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 30.06
1

Viega Sanpress Bend 45° 28 Gunmetal/glossy 111670 - Druckrohre Und Armaturen

Viega Sanpress Bend 45° 28 Gunmetal/glossy 111670 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 26.31
1

Viega Sanpress Bend 90° 35 Gunmetal/glossy 117603 - Druckrohre Und Armaturen

Viega Sanpress Bend 90° 35 Gunmetal/glossy 117603 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 37.58
1

Viega Sanpress Overbending 18 Stainless Steel / Glossy - Druckrohre Und Armaturen - 289010

Viega Sanpress Overbending 18 Stainless Steel / Glossy - Druckrohre Und Armaturen - 289010

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 31.81
1

Viega Sanpress Inox Transition Fitting 28 x 1" Stainless Steel/bright 438333 - Druckrohre Und Armaturen

Viega Sanpress Inox Transition Fitting 28 x 1" Stainless Steel/bright 438333 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 48.88
1