16 Ergebnisse (0,13933 Sekunden)

Alle Filter anzeigen

Marke

Farbe

Händler

Preis (EUR)

Filter zurücksetzen

Produkte
Von
Shops

Viega Easytop Ball Valve 28 mm x 1" Gunmetal - Armaturen - 746780

Viega Easytop Ball Valve 28 mm x 1" Gunmetal - Armaturen - 746780

Easytop Ball Valve With Sc-contur- Press Connection, Rp-threadscomponents Valve Casing in Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Stainless Steel Ball, Actuation Lever T-form With Medium Marking Green/red Exchangeable, Epdm Sealing Element.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °C With Dvgw-test Markdn: 25, d: 28, Rp: 1

EUR 59.93
1

Viega Easytop Ball Valve 18 mm x 3/4" Gunmetal - Armaturen - 747077

Viega Easytop Ball Valve 18 mm x 3/4" Gunmetal - Armaturen - 747077

Easytop Ball Valve With Sc-contur- For Water- And Heat Meter- Not Suitable For Easytop Insulating Shell 2275.90- Press Connection, G-threadcomponentsvalve Casing Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Black Powder-coated Actuating Lever Made of Metal, Epdm Sealing Element, Epdm Flat Seal.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °Cwith Dvgw-test Markdn: 15, d: 18, G: 34

EUR 85.91
1

Viega Easytop Ball Valve 22 mm x 3/4" Gunmetal - Armaturen - 747084

Viega Easytop Ball Valve 22 mm x 3/4" Gunmetal - Armaturen - 747084

Easytop Ball Valve With Sc-contur- For Water- And Heat Meter- Not Suitable For Easytop Insulating Shell 2275.90- Press Connection, G-threadcomponentsvalve Casing Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Black Powder-coated Actuating Lever Made of Metal, Epdm Sealing Element, Epdm Flat Seal.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °Cwith Dvgw-test Mark DN: 20, d: 22, G: 34

EUR 86.61
1

Viega Easytop Ball Valve 15 mm x 3/4" Gunmetal - Armaturen - 747060

Viega Easytop Ball Valve 15 mm x 3/4" Gunmetal - Armaturen - 747060

Easytop Ball Valve With Sc-contur- For Water- And Heat Meter- Not Suitable For Easytop Insulating Shell 2275.90- Press Connection, G-threadcomponentsvalve Casing Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Black Powder-coated Actuating Lever Made of Metal, Epdm Sealing Element, Epdm Flat Seal.Technical Data Operating Pressure Max. 1.6 Mpa (PN 16) Operating Temperature Max. 110 °Cwith Dvgw-test Mark DN: 15, d: 15, G: 34

EUR 61.11
1

Viega Sanpress Inox Bend 90° 54 Stainless Steel/bright 435769 - Druckrohre Und Armaturen

Viega Sanpress Inox Bend 90° 54 Stainless Steel/bright 435769 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 58.57
1

Viega Sanpress Bend 90° 54 Gunmetal/glossy 199395 - Druckrohre Und Armaturen

Viega Sanpress Bend 90° 54 Gunmetal/glossy 199395 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 78.12
1

Viega Sanpress Bend 45° 42 Gunmetal/glossy 128531 - Druckrohre Und Armaturen

Viega Sanpress Bend 45° 42 Gunmetal/glossy 128531 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 58.51
1

Viega Sanpress Bend 90° 42 Gunmetal/glossy 130497 - Druckrohre Und Armaturen

Viega Sanpress Bend 90° 42 Gunmetal/glossy 130497 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 57.47
1

Viega Sanpress Bend 45° 42 Gunmetal/glossy 134471 - Druckrohre Und Armaturen

Viega Sanpress Bend 45° 42 Gunmetal/glossy 134471 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 57.48
1

Viega Sanpress Inox Bend 45° 54 Stainless Steel/bright 435370 - Druckrohre Und Armaturen

Viega Sanpress Inox Bend 45° 54 Stainless Steel/bright 435370 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 57.24
1

Viega Sanpress Inox Bend 45° 54 Stainless Steel/bright 435448 - Druckrohre Und Armaturen

Viega Sanpress Inox Bend 45° 54 Stainless Steel/bright 435448 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 56.12
1

Viega Sanpress Bend 90° 42 Gunmetal/glossy 119560 - Druckrohre Und Armaturen

Viega Sanpress Bend 90° 42 Gunmetal/glossy 119560 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 54.94
1

Viega Sanpress Inox Transition Fitting 42 x 1 1/2" Stainless Steel / Glossy - Druckrohre Und Armaturen - 438357

Viega Sanpress Inox Transition Fitting 42 x 1 1/2" Stainless Steel / Glossy - Druckrohre Und Armaturen - 438357

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 70.70
1