19 Ergebnisse (0,17282 Sekunden)

Alle Filter anzeigen

Marke

Farbe

Händler

Preis (EUR)

Filter zurücksetzen

Produkte
Von
Shops

Viega Easytop Ball Valve 28 mm x 1" Gunmetal - Armaturen - 746780

Viega Easytop Ball Valve 28 mm x 1" Gunmetal - Armaturen - 746780

Easytop Ball Valve With Sc-contur- Press Connection, Rp-threadscomponents Valve Casing in Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Stainless Steel Ball, Actuation Lever T-form With Medium Marking Green/red Exchangeable, Epdm Sealing Element.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °C With Dvgw-test Markdn: 25, d: 28, Rp: 1

EUR 60.01
1

Viega Easytop Ball Valve 18 mm x 3/4" Gunmetal - Armaturen - 747077

Viega Easytop Ball Valve 18 mm x 3/4" Gunmetal - Armaturen - 747077

Easytop Ball Valve With Sc-contur- For Water- And Heat Meter- Not Suitable For Easytop Insulating Shell 2275.90- Press Connection, G-threadcomponentsvalve Casing Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Black Powder-coated Actuating Lever Made of Metal, Epdm Sealing Element, Epdm Flat Seal.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °Cwith Dvgw-test Markdn: 15, d: 18, G: 34

EUR 71.01
1

Viega Transition Piece PB 16 mm x 1/2" Nipple Gunmetal - Pex Systeme - 702199

Viega Transition Piece PB 16 mm x 1/2" Nipple Gunmetal - Pex Systeme - 702199

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xcdimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xcflexible, Blackdimensionspress Connectors And Pipesraxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installationsoperating Temperature Max. 70 °Coperating Pressure Max. 1.0 Mpaheating Installationsoperating Temperature Max. 80 °Coperating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 57.74
1

Viega Connection Screw PB 16 mm x 3/4" Gunmetal - Pex Systeme - 688431

Viega Connection Screw PB 16 mm x 3/4" Gunmetal - Pex Systeme - 688431

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xc•Dimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xc•Flexible, Blackdimensionspress Connectors And Pipes•Raxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63•Raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installations•Operating Temperature Max. 70 °C•Operating Pressure Max. 1.0 Mpaheating Installations•Operating Temperature Max. 80 °C•Operating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 58.96
1

Viega Clamp Connection Combi PB 15 x 2.5 mm Gunmetal - Pex Systeme - 717179

Viega Clamp Connection Combi PB 15 x 2.5 mm Gunmetal - Pex Systeme - 717179

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xc•Dimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xc•Flexible, Blackdimensionspress Connectors And Pipes•Raxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63•Raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installations•Operating Temperature Max. 70 °C•Operating Pressure Max. 1.0 Mpaheating Installations•Operating Temperature Max. 80 °C•Operating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 53.31
1

Viega Coupling PB 16 mm Gunmetal - Pex Systeme - 700003

Viega Coupling PB 16 mm Gunmetal - Pex Systeme - 700003

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xc•Dimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xc•Flexible, Blackdimensionspress Connectors And Pipes•Raxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63•Raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installations•Operating Temperature Max. 70 °C•Operating Pressure Max. 1.0 Mpaheating Installations•Operating Temperature Max. 80 °C•Operating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 71.46
1

Viega Transition Piece PB 16 mm x 1/2" Sleeve Gunmetal - Pex Systeme - 702205

Viega Transition Piece PB 16 mm x 1/2" Sleeve Gunmetal - Pex Systeme - 702205

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionpipesraxofix Pe-xc/al/pe-xc•Dimensionally Stable, Oxygen-proof in Acc. With Din 4726, Greyraxofix Pe-xc•Flexible, Blackdimensionspress Connectors And Pipes•Raxofix-pe-xc/al/pe-xc: d 16/20/25/32/40/50/63•Raxofix Pe-xc: d 16/20areas of Application Pe-xc/al/pe-xcdrinking Waterheatingrainwatercompressed Airareas of Application Pe-xcrainwaterdrinking Wateruse of The System For Application Areas Other Than Those Described Here Must be Agreed With Viega Service Center.Operating Conditionsdrinking Water Installations•Operating Temperature Max. 70 °C•Operating Pressure Max. 1.0 Mpaheating Installations•Operating Temperature Max. 80 °C•Operating Pressure Max. 1.0 Mpairrelevant of The Direction of Flow, Mixed Installations Are Permitted.Notethe Dvgw Test Mark is Only Valid f

EUR 58.47
1

Viega Sanpress Bend 45° 42 Gunmetal/glossy 134471 - Druckrohre Und Armaturen

Viega Sanpress Bend 45° 42 Gunmetal/glossy 134471 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 57.48
1

Viega Sanpress Inox Bend 45° 54 Stainless Steel/bright 435448 - Druckrohre Und Armaturen

Viega Sanpress Inox Bend 45° 54 Stainless Steel/bright 435448 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 56.12
1

Viega Sanpress Inox Transition Fitting 42 x 1 1/2" Stainless Steel / Glossy - Druckrohre Und Armaturen - 438357

Viega Sanpress Inox Transition Fitting 42 x 1 1/2" Stainless Steel / Glossy - Druckrohre Und Armaturen - 438357

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 90.31
1

Viega Sanpress Bend 90° 54 Gunmetal/glossy 199395 - Druckrohre Und Armaturen

Viega Sanpress Bend 90° 54 Gunmetal/glossy 199395 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 78.12
1

Viega Sanpress Inox Bend 90° 54 Stainless Steel/bright 435769 - Druckrohre Und Armaturen

Viega Sanpress Inox Bend 90° 54 Stainless Steel/bright 435769 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 56.02
1

Viega Sanpress Bend 90° 42 Gunmetal/glossy 119560 - Druckrohre Und Armaturen

Viega Sanpress Bend 90° 42 Gunmetal/glossy 119560 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 55.02
1

Viega Sanpress Inox Bend 45° 54 Stainless Steel/bright 435370 - Druckrohre Und Armaturen

Viega Sanpress Inox Bend 45° 54 Stainless Steel/bright 435370 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 57.32
1

Viega Sanpress Bend 90° 42 Gunmetal/glossy 130497 - Druckrohre Und Armaturen

Viega Sanpress Bend 90° 42 Gunmetal/glossy 130497 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 57.56
1

Viega Sanpress Bend 45° 42 Gunmetal/glossy 128531 - Druckrohre Und Armaturen

Viega Sanpress Bend 45° 42 Gunmetal/glossy 128531 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Gunmetal, Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Dinen 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene

EUR 58.59
1