5 resultater (0,21262 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

D-Link 48 ports GE + 2 10GE ports + 2 SFP+ Smart Managed Switch

D-Link 48 ports GE + 2 10GE ports + 2 SFP+ Smart Managed Switch

The dgs-1520 series, a new generation of lite layer 3 stackable smart managed switches, includes four 10 gb ports for uplink or stacking up to a total of eight switches with a total of 80 gigabit stacking bandwidth. Designed for effortless multi-site network deployments with zero touch provisioning, the dgs-1520 series is also powerful enough for server and storage applications. For unrestricted wi-fi 6 edge device capabilities, poe models offer four 2.5 gb base-t ports for multi-gigabit connectivity. For smbs with expanding networks and significant bandwidth growth, the dgs-1520 effortlessly adds highly cost-effective 10 gb connectivity to ensure seamless aggregation between access and core layers.- stackable smart gigabitstack up to eight switches for high-density gigabit aggregation- zero touch provisioningeffortless multi-site deployment- multi-gigabit portsfour 2.5 gb base-t ports for wi-fi 6 aps (poe models)- flexible stacking or uplink10 gb base-t and/or sfp+ (fiber) ports for stacking or uplink- high capacityup to 188 gbps switching capacity per switch- poe capableup to 370 w poe output per switch- power redundancyconnect with dps-520 for power redundancy (non-poe models)- advanced manageabilitysupports dynamic routing and selective q-in-q tagginghigh availabilitythe dgs-1520 series brings reliable, yet affordable, gigabit connectivity with four 10-gigabit ports (two 10g base-t and two 10g sfp+) for high-speed uplink or stacking. Boost your network performance, simplify your network infrastructure, improve bandwidth and reduce cabling complexity.zero touch provisioningzero touch provisioning is perfect for multi-site network expansions. Simply preconfigure your network settings in a centralized location, then install the dgs-1520 switches for effortless deployments.multi-gigabit supportmulti-gigabit ports on the dgs-1520 series switch (poe models only) support 100 mb / 1 gb / 2.5 gb speeds to maximize various device capabilities, such as wi-fi 6 (802.11ax) access points, which can often exceed single gigabit speeds.powerful stacking capabilitystack up to eight dgs-1520 switches with a total of 80 gb stacking bandwidth using hybrid mode (copper and/or fiber), increasing flexibility, scalability, and cost effectiveness for smbs.minimize outages with power redundancyfor a more resilient network infrastructure, connect up to four dgs-1520 switches (non-poe models only) with the dps-520 poe redundant power supply system through the management port and actively back-up four devices to significantly reduce power redundancy costs.auto discovery: automatically detect power requirements of connected pd devices. Rps port priority: enables administrators to define rps failover policy.status reporting: administrators can connect via web browser to remotely monitor dps-520 status.low network latency, high poe budgethigh gigabit-port density with up to 188 gb total switching capacity, and up to 30 w per port with 370 w total poe budget to power your poe-enabled devices.enhanced manageability for peace of mindd-view 7for more complex network infrastructures, d-view 7, a centralized management platform, can be installed for in-depth network management and maintenance to optimize network availability, reliability, security, and resilience.d-link network assistantbuilt upon a highly-intuitive user interface, the d-link network assistant (dna) simplifies device configuration using the d-link discovery protocol, auto-detecting supported devices and displaying them for port-level configurations.

EUR 1218.90
1

DLINK Wireless AX3600 Unified Access Point

DLINK Wireless AX3600 Unified Access Point

Next‑generation wi‑fi 6.the ax3600 wi-fi 6 dual-band unified access point brings the latest wi-fi technology to small-to-medium-sized businesses as well as larger enterprises. It’s part of d-link’s unified wireless solution that allows companies to set up a highly scalable, flexible and manageable wi-fi network.wi-fi 6next-generation 802.11ax wi-fi 6 technology provides increased speed, capacity and the latest wpa3 security.dual-band with band steeringtwo bands to improve throughput and coverage as well as reduces co-channel interference.4 x 4 mu-mimoimproved efficiency in handling throughput distribution to multiple devices connected to the network.poe & flexible installationpower the device over ethernet without the need for nearby power outlets with the option for ceiling or wall mounting.fast roamingallows wireless clients to move freely, jumping from ap to ap without losing connectivity.self-healingset up a robust and resilient wireless network that can automatically heal itself when an ap fails.self-healingset up a robust and resilient wireless network that can automatically heal itself when an ap fails.take your business to the next level with wi‑fi 6uses the latest wi-fi technology to deliver reliable wireless performance and reduce congestion, with combined maximum wireless signal rates of up to 3.6 gbps (1147 mbps on 2.4 ghz band and 2402 mbps on 5 ghz band)2. Together with ofdma and mu-mimo support, the dwl-x8630ap gives your business a faster wireless network with higher capacity and efficiency.- band steering- mu-mimo- airtime fairness- 802.11k fast roamingflexible installationpower-over-ethernet support allows the dwl-x8630ap to be connected and powered using a single cable, so it can be installed in areas without power outlets.highly scalable and centrally managedthe dwl-x8630ap can be used as a single access point or as part of a centrally managed wireless network with up to 1,024 access points when deployed with d-link unified wireless controllers.self‑healing and resilientwhen working in conjunction with d-link unified wireless controllers, you can create a network that automatically heals itself when an access point or controller fails, allowing your business to stay online.self‑optimised networkautomatic radio frequency (rf) management provides the best possible coverage for wireless clients by reducing interference when access points are deployed close to each other. When the dwl-x8630ap senses a neighbouring ap nearby, it will automatically select a non-interfering channel.this significantly reduces rf interference and allows you to deploy aps more densely. To further minimise interference, when a nearby ap is on the same channel, the dwl-x8630ap will automatically adjust its transmission power.

EUR 674.90
1

D-Link Switch, 5-portar, Gigabit, Plug and Play, SFP, svart

D-Link Switch, 5-portar, Gigabit, Plug and Play, SFP, svart

The dis-100g series gigabit industrial unmanaged switches are equipped with a variety of port combinations including 10/100/1000base-t non-poe or poe ports, and sfp ports. These switches feature a robust design making them ideal for deployment in industrial and outdoor cabinet surveillance settings, capable of withstanding the harshest environments. In addition, the dis-100g series are plug-and-play, allowing for effortless and swift deployment.durable, reliable, and efficientthe dis-100g series switches are housed in a highly resistant ip30-rated metal casing to protect the switches from harsh environmental conditions. The high electromagnetic compatibility (emc) protects the dis-100g series from unwanted effects when operating in environments with strong electromagnetic interference. The fanless design extends the life of the dis-100g series while also being able to operate in a wide temperature range from -40 °c up to 75 °c. For increased flexibility, the dis-100g series can also be mounted on a din rail or conveniently mounted on a solid surface wall. In addition, the dis-100g series supports dual power input which allows for a redundant power supply configuration to make sure the switches continue to operate in the event of a primary power supply failure.meanwhile, a powerful ieee 802.1p quality of service (qos) engine prioritizes network traffic so that time-sensitive data is delivered efficiently, even during bursts of high data traffic. This helps ensure an optimal experience for streaming critical data such as from surveillance and recognition systems.power over ethernet supportthe poe-ready dis-100g-5psw features a total poe budget of 120 w, capable of supplying up to 30 w of power per port to connected poe-enabled devices leveraging existing conventional ethernet cabling. This effectively cuts down deployment times, reduces cable clutter, and eliminates the need for dedicated power supplies to allow poe-devices to be installed in remote locations.green ethernet technologythe dis-100g series features green technology, including ieee 802.3az energy-efficient ethernet (eee), link status detection, and cable length detection. Energy efficient ethernet reduces the power consumption of the switches when network utilization is low, effectively lowering the cost of ownership duringperiods of inactivity. Link status detection automatically powers down ports when there is no link detected, saving power when the connected device has been shut down or disconnected. Cable length detection automatically adjusts the power output of the port based on the length of the cable, reducing the power requirements of the switch to only what is necessary for the installation.limited lifetime warrantyd-link offers a limited lifetime warranty on the dis-100g series gigabit industrial unmanaged switches to further its commitment to product quality and long-term customer confidence.

EUR 328.90
1

D-Link PoE Gigabit injektor för PoE/PoE+, 10/100/1000Mbps, 32W, vit

D-Link PoE Gigabit injektor för PoE/PoE+, 10/100/1000Mbps, 32W, vit

- facilitates deployment of poe devices where power outlets are not available- reduces installation and network equipment costs by eliminating the need for electrical wiring- provides power over existing network cabling to poe devices such as access points, ip cameras, and ip phones- lightweight, compact and easy to install- supports 802.3af / 802.3at- 10/100/1000 interface provides flexibility for all types of connectionsd-link’s dpe-301gi 1-port poe injector is used to provide i.t. Professionals with the benefits of power over ethernet (poe), even when other devices in the network do not support it. With poe technology, low voltage dc power and ethernet data signals are combined on a single network cable, which facilitates powering of end devices like ip cameras, wireless access points (aps), and voip phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.the dpe-301gi device supports gigabit speeds, and can connect to 10mbps, 100mbps or 1000mbps through the rj-45 interface. This device also supports the ieee 802.3af and 802.3at poe/poe+ standards, which ensures interoperability with other standards-based poe and poe+ devices. Small and compact, the dpe-301gi is lightweight, has integrated mounting slots, and is easy to install.the dpe-301gi provides a power and data connection to a poe device over a single network cable. It allows i.t. Professionals to mount their poe devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The dpe-301gi combines electrical power with a gigabit network connection and produces a gigabit poe signal, allowing a single ethernet cable to carry both data and power to a device.also known as a “midspan pse”, the dpe-301gi poe injector can be used when deploying a multi-port poe switch is impractical or not feasible. It has two 10/100/1000 rj-45 ports. One port is for lan in, which is the network connection,typically connected to a non-poe switch or router. The other port isfor poe out, which is the connection that provides both power and data signal to the end device (pd). The dpe-301gi can be located anywhere on the ethernet link, although it’s typically placed near the switch/router.location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.support for ieee 802.3at ensures the dpe-301gi can power poe+ devices up to 30w, such as high power 802.11ac aps and ip cameras with ptz motors, heaters and blowers.poe injector and poe splitter tandemboth the dpe-301gi (injector) and dpe-301gs (splitter) can be used together, as a complete poe transport system. This is especially useful when a poe switch is not available, and the end device is not poe capable, but the network administrator still prefers the benefits of poe. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

EUR 61.90
1

D-Link DGS-1016D/E -16-porttinen Gigabit kytkin

D-Link DGS-1016D/E -16-porttinen Gigabit kytkin

Power savings by number of connected ports and link status computers do not require internet access all the time; neither do switches utilize all ports at all times. When a computer or network equipment is shutdown, switches often remain on and continue to consume considerable amount of power. With green ethernet technology, d-link switches can automatically detect link status and reduce power usage of ports that are idle. Computers or any connecting parties set to standby mode (not power off), however, will not provide significant power savings. Power savings by cable length the green ethernet switches have the ability to analyze the length of any ethernet cable connected to them for adjustment of power usage accordingly. Shorter lengths require less power. Overall power savings per day for a traditional switch, power consumption remains constant even when the ports are not in use. In a standard workday scenario where pcs are used for 10 hours a day and powered off 14 hours a day, and connected to the switch using 20 meter cables, d-link's green ethernet can save up to 20% power used for each system. Get the blazing speed of gigabit ethernet with the d-link gigaexpress dgs-1016d, an 16-port 10/100/1000mbps gigabit switch that delivers power, performance, and reliability in one cost-effective, space-saving design. Increase the speed of your network server and backbone connections, or make gigabit to the desktop a reality. Power users in the office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, cgi, cad, or multimedia files across the network instantly. The versatile and compact 1ru height design of the dgs-1016d enables the device to be rackmounted in a standard 19 inch rack, while conserving valuable rack space. Power-packed it features a non-blocking switching architecture that filters and forwards packets at full wire-speed for maximum throughput. An 8k mac address table provides scalability for even the largest networks. Address learning and aging, 802.3x flow control for full-duplex mode, and back pressure flow control for half-duplex mode alleviates traffic congestion and ensures reliable data transmission. Designed using industry standards, it is compatible with virtually all 10, 100, and 1000mbps ethernet devices and other vendor equipment. The d-link dgs-1016d 10/100/1000 mbps gigabit switch protects your existing network investments while providing you with a straightforward migration path to faster gigabit speeds. Easy to use the auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto mdi/mdi-x crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 mbps) and intelligently adjusts for compatibility and optimal performance. It also features diagnostic leds which display status and activity, allowing you to quickly detect and correct problems on the network. Every port also supports a cable diagnostic feature that helps to detect cable related problems.

EUR 78.90
1