ProfitSpring | B2B PPC Agency

Ball bearing Servo L1060

FUTABA S04130 Ball bearing Servo L1060

DKK 35.00

1

S3150 Digital Mini Servo 3.7kg 0.24s 4.8V

Digital high-torque mini servo with metal gears and dual ball bearings. Size: 30 x 10.8 x 29 mm Weight: 23 g Torque: 3.7 kg/cm @ 4.8V Speed: 0.24 s/60 @ 4.8V

DKK 299.22

1

S3170G Mini-Servo (retract) 8.5kg 0.47s

Digital mini retract servo that also works as a normal linear servo. Dual ball bearings and metal gears. Size: 34.5 x 16 x 25.8 mm Weight: 26 g Torque: 8.5 kg/cm @ 6V & 7.0 kg/cm @ 4.8V Speed: 0.47 s/60deg @ 6V & 0.57 s/60deg @ 4.8V

DKK 649.00

1

S.BUS Decoder 1600mm

The SBD-1 is a converter for using up to 3 conventional servos (other than S.BUS servo*2) with the S.BUS system.There are five types of SBD-1 S.BUS Decoders:200 mm (weight 6.9 g)400 mm (weight 10.8 g)600 mm (weight 14.7 g)1100 mm (weight 24.5 g)1600 mm (weight 34.3 g)Plus the SBD-2 S.BUS Decoder unit that can handle up to 8 servosDimensions: 41.8 x 12.3 x 8.4 mm (excluding the wires)Power requirement: Ni-Cd, Ni-MH 4 to 5 cells equivalent battery (Futaba)Operating Temperature Range: -10 to +45°C

DKK 295.00

1

S.BUS Decoder 400mm

The SBD-1 is a converter for using up to 3 conventional servos (other than S.BUS servo*2) with the S.BUS system.There are five types of SBD-1 S.BUS Decoders: 200 mm (weight 6.9 g) 400 mm (weight 10.8 g) 600 mm (weight 14.7 g) 1100 mm (weight 24.5 g) 1600 mm (weight 34.3 g) Plus the SBD-2 S.BUS Decoder unit that can handle up to 8 servos Dimensions: 41.8 x 12.3 x 8.4 mm (excluding the wires) Power requirement: Ni-Cd, Ni-MH 4 to 5 cells equivalent battery (Futaba) Operating Temperature Range: -10 to +45C

DKK 275.00

1

Receiver R2006GS 6CH T6J,8J,10J HV S-FHSS SALE

System: S-FHSS 2.4GHz Channel: 6ch Antenna: Diversity Size: 25.043.18.8 mm Weight: 8.5g Voltage: 4.8 - 7.4V

DKK 359.00

1

Receiver R203GF 3CH S-FHSS

System: 2.4GHz FHSS Channels: 3 Antenna: Single Size: 39 26 10 mm Weight: 8.0 g Voltage: 4.8 - 7.4V

DKK 339.00

1

Futaba Receiver R7208SB 8K S.BUS2 FASSTest, FASST

Futaba R7208SB Receiver Specs: 8 channels FAAST FAASTest S.BUS/S.BUS2 Size: 38.9 x 25 x 9.2/14.5mm Weight: 9g

DKK 1175.00

1

Receiver R202GF 2CH S-FHSS

FHSS / S-FHSS 2.4GHz system 2-channels Power Requirements: 4.8-7.4V Size: 23 x 35 x 9 mm Weight: 6 g

DKK 289.00

1

Futaba Gyro GYD470 Drift Cars

Futaba GYD470 Drift Car Countersteer Gyro Rate Gyro for DRIFT RC Cars: Steering UseFEATURES: Dedicated RC car setting Remote gain function and mode switching function Integrated, compact, and light weight Easy setup Supports S.Bus/S.Bus2 Connection Only for Futaba digital servo (SR compatible) Rate, S.Bus, S.Bus2, SR Mode (Super Response) Specs: OPERATING VOLTAGE: DC 4.2-8.4V SIZE: 20.5 x 20.5 x 11 mm WEIGHT: 3.7 g

DKK 665.00

1

Receiver 4 channels 2.4G S-FHSS Micro

Futaba 2.4GHz S-FHSS system 4-channel micro receiver - Only for EP cars! Size: 35.2 x 23.4 x 12.4/9.0 mm Weight: 6g

DKK 349.00

1

Transmitter Battery NiMH 7,2V 1800mAh T8FGS/12FG/FX20/FX22

6-cell (7.2V) NiMH 1800 mAh transmitter battery. Length: 130 mm Width: 34 mm Thickness: 17 mm Weight: 195 gFor these Futaba radios: T8FG T12FG FX20 FX22

DKK 285.00

1

Transmitter Battery Li-Po 7,4V 2000mAh T10PX,T16iZ (LT2F2000B)

Futaba T16iZ Transmitter Battery LiPo 7.4V 2000mAh Specs: LT2F2000B LiPo 7.4V 2000mAh 14.8Wh Charging port: USB-A (5V/2A) Length: 80mm Width: 46mm Thickness: 17.4 Weight: 96g

DKK 775.00

1

S3102 Micro Servo 4.6kg 0.20s (analog)

Analog mini/micro servo with metal gears. Size: 28 x 13 x 29.7 mm Weight: 21 g Torque: 4.6 kg/cm @ 6V & 3.7 kg/cm @ 4.8V Speed: 0.20 s/60 @ 6V & 0.25 s/60 @ 4.8V

DKK 459.00

1

Transmitter Battery NiMH 6,0V 1800mAh

FUTABATransmitter Battery NiMH 6,0V 1800mAh A new 5-cell (6V) 1800mAh NiMH transmitter batterypack.Fits Futaba: T4PK(S/R) T4PL(S) T4PX T6J T8J T10J T14SG Dimensions: 43.5 x 17 x 84 mm Weight: 165 g

DKK 395.00

1

S9257 Digital Mini Heli Servo 2kg 0.08s 4.8V

Digital mini-servo that is perfect for small EP helicopters with GY520, GY701 or CGY750 gyros. Size: 35.5 x 15 x 28.6 mm Weight: 26 g Torque: 2 kg/cm @ 4.8V Speed: 0.08 s/60deg @ 4.8V

DKK 509.00

1

S3154 Digital Sub-Micro Servo 1,7kg 0.09s

Digital high-speed micro servo suitable for small airplanes and mini EP helicopters. Size: 21.8 x 11 x 19.8 mm Weight: 9.9 g Torque: 1.7 kg/cm @ 6V & 1.5 kg/cm @ 4.8V Speed: 0.09 s/60deg @ 6V & 0.10 s/60deg @ 4.8V

DKK 225.00

1

S3157 Digital Micro Servo 1.7kg 0.09s

Digital high-speed micro servo suitable for small airplanes and mini EP helicopters. Size: 21.8 x 11 x 23.2 mm Weight 8.3 g Torque: 1.7 kg/cm @ 6V & 1.5 kg/cm @ 4.8V Speed: 0.09 s/60deg @ 6V & 0.10 s/60deg @ 4.8V

DKK 197.00

1

S3114 Sub-Micro Servo 1.7kg 0.09s

Analog high-speed micro servo suitable for small airplanes and mini EP helicopters. Size: 21.8 x 11 x 19.8 mm Weight: 7.8 g Torque: 1.7 kg/cm @ 6V & 1.5 kg/cm @ 4.8V Speed: 0.09 s/60deg @ 6V & 0.10 s/60deg @ 4.8V

DKK 195.00

1

Transmitter Battery Li-Fe 6,6V 2100mAh 4PX/4PL/6J/8J/14SG

Futaba #FT2F2100B 2S 6.4V 2100 mAh 14Wh LiFe transmitter battery Size: L85 x 41 x 17.6 mm Weight: 110 g NOT to be used as a receiver batterySuitable for: Futaba 4PX Futaba 4PK/S/R Futaba 4PL/S Futaba 6J Futaba 8J Futaba 10J Futaba 14SG

DKK 649.00

1

Transmitter Battery Li-Fe 6,6V 1100mAh 7PXE

Futaba 2S 6.6v 1100mAh LiFe Lightweight Transmitter Battery Specs: Type: LiFe transmitter battery Nominal Voltage: 6.6V Capacity: 1100mAh Size: 80 x 43 x 10.5mm Weight: 59g Connector: Futaba Balance Connector: JST-XH Futaba Reference#: EBA0148 & FT2F1100B Fits: T7PX T7XC T4PM T4PX(R) T4PV T4GRS T4PKS(R) T4PL(S) T3PV

DKK 295.00

1

Receiver R2004GF 4CH - 4YF, 2PL, 3PL, 4PL FHSS

For use with the 2PL, 3PL, 4PL and 4YF-2.4GHz FHSS transmitters. Flexible coaxial antenna that's easy to position inside a model for ideal reception. Does not have battery failsafe function. 2.4GHz FHSS system 4 Channels Power Requrements: 4.8V to 7.4V Size: 26 x 39 x 10 mm Weight: 8 g

DKK 415.00

1

Receiver R2008SB 8CH T6J, 8J, 10J HV S.BUS S-FHSS

A new 2.4GHz S-FHSS/FHSS S.BUS High Voltage receiver that works with all existing Futaba FHSS/S-FHSS transmitters including the new T8J. 2.4GHz S-FHSS / FHSS auto-detect 8 channels + S.BUS Dual Antenna Diversity Power feed: 4.8-7.4V Size: 42.8 x 24.9 x 14 mm Weight: 9.5 g

DKK 395.00

1

S3073HV Std Servo 3.9kg 0.16s HV

Replaces the S3151 servo Suitable for airplanes and helicopters Features: HV, S.BUS & 1BB+1MB Battery: 6-7.4V Power: 3.1kg/cm @ 6V - 3.5kg/cm @ 6.6V - 3.9kg/cm @ 7.4V Speed: 0.20s/60 @ 6V - 0.18s/60 @ 6.6V - 0.16s/60 @ 7.4V Size: L40.5 x W20 x H36.1 mm Weight: 41 g 300 mm long connecting wire

DKK 365.00

1

Receiver R404SBS-E F-4G/SR Diversity (internal)

Futaba R404SBS-E Receiver (For Electric Cars Only)Only compatible with T10PX F-4G/F-4G SRReceiving frequency: 2.4GHz bandTelemetry Receiver RF power output: 2.2 mW EIRPPower requirement: 3.7 V~7.4 V battery (Dry cell battery cannot be used.)System: F-4G system/S.BUS2 systemSize: 25.5x20.7x10.6mm (includes a 30.5mm high antenna housing)Weight: 7.2g

DKK 599.00

1

Mærke

Butik

Pris (EUR)

Ball bearing Servo L1060

S3150 Digital Mini Servo 3.7kg 0.24s 4.8V

S3170G Mini-Servo (retract) 8.5kg 0.47s

S.BUS Decoder 1600mm

S.BUS Decoder 400mm

Receiver R2006GS 6CH T6J,8J,10J HV S-FHSS SALE

Receiver R203GF 3CH S-FHSS

Futaba Receiver R7208SB 8K S.BUS2 FASSTest, FASST

Receiver R202GF 2CH S-FHSS

Futaba Gyro GYD470 Drift Cars

Receiver 4 channels 2.4G S-FHSS Micro

Transmitter Battery NiMH 7,2V 1800mAh T8FGS/12FG/FX20/FX22

Transmitter Battery Li-Po 7,4V 2000mAh T10PX,T16iZ (LT2F2000B)

S3102 Micro Servo 4.6kg 0.20s (analog)

Transmitter Battery NiMH 6,0V 1800mAh

S9257 Digital Mini Heli Servo 2kg 0.08s 4.8V

S3154 Digital Sub-Micro Servo 1,7kg 0.09s

S3157 Digital Micro Servo 1.7kg 0.09s

S3114 Sub-Micro Servo 1.7kg 0.09s

Transmitter Battery Li-Fe 6,6V 2100mAh 4PX/4PL/6J/8J/14SG

Transmitter Battery Li-Fe 6,6V 1100mAh 7PXE

Receiver R2004GF 4CH - 4YF, 2PL, 3PL, 4PL FHSS

Receiver R2008SB 8CH T6J, 8J, 10J HV S.BUS S-FHSS

S3073HV Std Servo 3.9kg 0.16s HV

Receiver R404SBS-E F-4G/SR Diversity (internal)

Powered by Cobiro