61 resultater (0,22023 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

FloPlast Mini Gutter Fascia Bracket - 76mm Brown

FloPlast Mini Gutter Fascia Bracket - 76mm Brown

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.The bracket is screwed to the supporting timber a single countersunk screw (we recommend 5 x 25m). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.Mini Gutter fascia brackets should be spaced at 1m centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres to 800mm.

GBP 2.03
1

FloPlast Mini Gutter External Stopend - 76mm Black

FloPlast Mini Gutter External Stopend - 76mm Black

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

GBP 3.47
1

FloPlast Mini Gutter External Stopend - 76mm White

FloPlast Mini Gutter External Stopend - 76mm White

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

GBP 3.47
1

FloPlast Mini Gutter Fascia Bracket - 76mm White

FloPlast Mini Gutter Fascia Bracket - 76mm White

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.The bracket is screwed to the supporting timber a single countersunk screw (we recommend 5 x 25m). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.Mini Gutter fascia brackets should be spaced at 1m centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres to 800mm.

GBP 2.03
1

FloPlast Mini Gutter Fascia Bracket - 76mm Black

FloPlast Mini Gutter Fascia Bracket - 76mm Black

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.The bracket is screwed to the supporting timber a single countersunk screw (we recommend 5 x 25m). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.Mini Gutter fascia brackets should be spaced at 1m centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres to 800mm.

GBP 2.03
1

FloPlast Mini Gutter External Stopend - 76mm Brown

FloPlast Mini Gutter External Stopend - 76mm Brown

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

GBP 3.47
1

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Anthracite Grey

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Anthracite Grey

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

GBP 2.70
1

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Black

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Black

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

GBP 2.70
1

FloPlast Half Round Gutter Fascia Bracket - 112mm Cast Iron Effect

FloPlast Half Round Gutter Fascia Bracket - 112mm Cast Iron Effect

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.The bracket is screwed to the fascia board using two countersunk screws (we recommend 5 x 25mm or 5 x 30mm). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.Half round fascia brackets should be spaced at 1m centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres to 800mm.

GBP 2.48
1

FloPlast Square Gutter External Stopend - 114mm Brown

FloPlast Square Gutter External Stopend - 114mm Brown

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;

GBP 2.89
1

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Grey

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Grey

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

GBP 2.70
1

FloPlast Half Round Gutter External Stopend - 112mm Grey

FloPlast Half Round Gutter External Stopend - 112mm Grey

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;

GBP 2.00
1

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Brown

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Brown

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

GBP 2.70
1

FloPlast Square Gutter External Stopend - 114mm Black

FloPlast Square Gutter External Stopend - 114mm Black

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;

GBP 2.89
1

FloPlast Half Round Gutter External Stopend - 112mm Brown

FloPlast Half Round Gutter External Stopend - 112mm Brown

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;

GBP 2.00
1

FloPlast Ogee Gutter Top Hung Fascia Bracket - 110mm x 80mm White

FloPlast Ogee Gutter Top Hung Fascia Bracket - 110mm x 80mm White

Top hung ogee fascia brackets are used to create minimalist sightlines when looking up at the gutter from ground level by removing the usual view of traditional fascia support brackets underneath the gutter.This top hung bracket has a clip on the end of the bracket arm that locates over a lug on the front edge of the gutter, meaning that only a minimal section of the end of the clip can be seen from ground level.Top hung ogee fascia brackets should be spaced at a maximum of 800mm centres and less if you live in an area that is prone to heavy snowfalls.

GBP 3.65
1

FloPlast Square Gutter External Stopend - 114mm White

FloPlast Square Gutter External Stopend - 114mm White

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;

GBP 2.89
1

FloPlast Ogee Gutter Top Hung Fascia Bracket - 110mm x 80mm Brown

FloPlast Ogee Gutter Top Hung Fascia Bracket - 110mm x 80mm Brown

Top hung ogee fascia brackets are used to create minimalist sightlines when looking up at the gutter from ground level by removing the usual view of traditional fascia support brackets underneath the gutter.This top hung bracket has a clip on the end of the bracket arm that locates over a lug on the front edge of the gutter, meaning that only a minimal section of the end of the clip can be seen from ground level.Top hung ogee fascia brackets should be spaced at a maximum of 800mm centres and less if you live in an area that is prone to heavy snowfalls.

GBP 3.65
1

FloPlast Half Round Gutter External Stopend - 112mm Black

FloPlast Half Round Gutter External Stopend - 112mm Black

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;

GBP 2.00
1

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm White

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm White

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

GBP 2.70
1

FloPlast Ogee Gutter Top Hung Fascia Bracket - 110mm x 80mm Black

FloPlast Ogee Gutter Top Hung Fascia Bracket - 110mm x 80mm Black

Top hung ogee fascia brackets are used to create minimalist sightlines when looking up at the gutter from ground level by removing the usual view of traditional fascia support brackets underneath the gutter.This top hung bracket has a clip on the end of the bracket arm that locates over a lug on the front edge of the gutter, meaning that only a minimal section of the end of the clip can be seen from ground level.Top hung ogee fascia brackets should be spaced at a maximum of 800mm centres and less if you live in an area that is prone to heavy snowfalls.

GBP 3.65
1

FloPlast Half Round Gutter External Stopend - 112mm White

FloPlast Half Round Gutter External Stopend - 112mm White

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;

GBP 2.00
1

FloPlast Half Round Gutter Internal Stopend - 112mm Black

FloPlast Half Round Gutter Internal Stopend - 112mm Black

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. Stopend Outlets can also be used as an alternative to this method.The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

GBP 1.30
1

FloPlast Square Gutter Internal Stopend - 114mm White

FloPlast Square Gutter Internal Stopend - 114mm White

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. Stopend Outlets can also be used as an alternative to this method.The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

GBP 1.87
1

FloPlast Half Round Gutter Internal Stopend - 112mm Grey

FloPlast Half Round Gutter Internal Stopend - 112mm Grey

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. Stopend Outlets can also be used as an alternative to this method.The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

GBP 1.30
1