23 resultater (0,22139 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

FloPlast Drainage Pipe Single Socket - 110mm x 3mtr - Pack of 2

FloPlast Drainage Pipe Single Socket - 110mm x 3mtr - Pack of 2

Our single socket drainage pipe is manufactured by UK leading supplier FloPlast, to BS EN 13476-2 SN8. Our pipes have a solid walled UPVC rather than the less robust foam cored versions available on the market._x000D_This single socket pipe comes with one socketed end incorporating a 110mm ring seal socket and one pre-chamfered plain end._x000D_When cutting pipes it is good practise to always chamfer the ends with a rasp or file prior to inserting into any fittings. SG100 Lubricant should be used whenever a joint is made. Pipes should generally be laid to a fall of 1:40 in drainage systems where there are less than five WCand#039;s discharging into the pipe._x000D_This pipe is compatible with our soil and vent system and also with all other leading UK manufacturersand#039; drainage systems._x000D_Please note that orders for pipe only (without an appropriate amount of fittings) will incur an additional delivery charge, which we will contact you about before dispatching your order.

GBP 27.04
1

FloPlast Half Round Gutter - 112mm x 4mtr Cast Iron Effect

FloPlast Half Round Gutter - 112mm x 4mtr Cast Iron Effect

Our Half Round Cast Iron Effect guttering comes in 4m lengths - the standard length for most PVC gutters.Made by the UK market leaders FloPlast, our half round gutter system measures 112mm across the top and is 52mm deep. Despite the huge choice in gutter designs these days, Cast Effect half round is one of our most popular gutter options. With its traditional appearance, and simple yet efficient functionality this guttering is guaranteed for 20 years.Half round cast effect gutter connects to 68mm round downpipe.

GBP 36.64
1

FloPlast Ogee Gutter - 110mm x 80mm x 4mtr Brown

FloPlast Ogee Gutter - 110mm x 80mm x 4mtr Brown

Our Ogee guttering comes in 4m lengths, the industry standard for most gutter systems.Made by the UK market leaders FloPlast, our Niagara Ogee gutter system measures 110mm across the top and is 80mm deep. Ogee has the highest capacity of any of our standard domestic PVC gutters yet it doesnand#039;t look out of place on any type of property.With its interesting feature groove appearance and very efficient functionality this guttering is guaranteed for 10 years (20 years on Cast Iron Effect).Ogee gutter connects to 68mm round downpipe or 65mm square downpipe.For a quick precis of this product take a look at our PBSL group video below.

GBP 23.71
1

FloPlast Ogee Gutter - 110mm x 80mm x 4mtr Black

FloPlast Ogee Gutter - 110mm x 80mm x 4mtr Black

Our Ogee guttering comes in 4m lengths, the industry standard for most gutter systems.Made by the UK market leaders FloPlast, our Niagara Ogee gutter system measures 110mm across the top and is 80mm deep. Ogee has the highest capacity of any of our standard domestic PVC gutters yet it doesnand#039;t look out of place on any type of property.With its interesting feature groove appearance and very efficient functionality this guttering is guaranteed for 10 years (20 years on Cast Iron Effect).Ogee gutter connects to 68mm round downpipe or 65mm square downpipe .For a quick precis of this product take a look at our PBSL group video below.

GBP 23.71
1

FloPlast Ogee Gutter - 110mm x 80mm x 4mtr White

FloPlast Ogee Gutter - 110mm x 80mm x 4mtr White

Our Ogee guttering comes in 4m lengths, the industry standard for most gutter systems.Made by the UK market leaders FloPlast, our Niagara Ogee gutter system measures 110mm across the top and is 80mm deep. Ogee has the highest capacity of any of our standard domestic PVC gutters yet it doesnand#039;t look out of place on any type of property.With its interesting feature groove appearance and very efficient functionality this guttering is guaranteed for 10 years (20 years on Cast Iron Effect).Ogee gutter connects to 68mm round downpipe or 65mm square downpipe .For a quick precis of this product take a look at our PBSL group video below.

GBP 23.71
1

FloPlast Ogee Gutter - 110mm x 80mm x 4mtr Anthracite Grey

FloPlast Ogee Gutter - 110mm x 80mm x 4mtr Anthracite Grey

Our Ogee guttering comes in 4m lengths, the industry standard for most gutter systems.Made by the UK market leaders FloPlast, our Niagara Ogee gutter system measures 110mm across the top and is 80mm deep. Ogee has the highest capacity of any of our standard domestic PVC gutters yet it doesnand#039;t look out of place on any type of property.With its interesting feature groove appearance and very efficient functionality this guttering is guaranteed for 10 years (20 years on Cast Iron Effect).Ogee gutter connects to 68mm round downpipe or 65mm square downpipe .For a quick precis of this product take a look at our PBSL group video below.

GBP 23.71
1

FloPlast Inspection Chamber Base 3 Fixed Inlets - 300mm Diameter

FloPlast Inspection Chamber Base 3 Fixed Inlets - 300mm Diameter

This popular mini chamber is always used in conjunction with our D820 and D822 risers and usually our CLKS300 square cover. Our recessed covers (CD300SR and T1G3) can also be used with this system.The main channel of the base is left open and the two side inlets are blanked off with integral blanking plugs - simply remove the blanking plug by pushing it out from within the base to open and use the side inlets.The side inlets are set at an angle of 45 degrees to the main channel. All inlets and the outlet feature a standard 110mm ring seal socket which accepts all leading UK makes of 110mm PVC-u underground drainage.

GBP 28.60
1

FloPlast Chrome Style Waste Tee - 32mm

FloPlast Chrome Style Waste Tee - 32mm

Chrome style waste tees are to connect a section of waste pipe into an existing pipe run. The tee is swept to ensure that the new section flows into the main run in the correct direction of flow. In most kitchen and bathroom applications the branch section drops into a main pipeThis fitting is available in 32mm and 40mm size options. The system is manufactured in the UK using state of the art technology to ensure a superb, blemish-free chrome effect finish.This chrome style compression waste system is manufactured in the UK to BS EN 1451. It is commonly used to connect waste pipes of differing materials or those made by different manufacturers.When making a compression joint, cut the pipe square and remove any burrs. Unscrew the nut from the fitting and remove it along with the washer and the rubber seal. Place these three components over the end of the pipe andndash; first the nut, then the washer followed by the seal. The dished side of the rubber seal should face away from the nut and towards the fitting. Push the pipe into the fitting as far as it will go, slide the seal and washer forward into position in the fitting and tighten the nut.The joint can be taken apart again if required, but always check that the rubber seal has not been damaged in any way as this will cause the joint to leak.Click here to watch our video showing how to assemble a compression waste joint.

GBP 30.00
1

FloPlast Drainage Pipe Plain Ended - 110mm x 3mtr - Pack of 2

FloPlast Drainage Pipe Plain Ended - 110mm x 3mtr - Pack of 2

Our plain ended drainage pipe is manufactured by leading UK supplier FloPlast, to BS EN 1401-1. Our pipes have a solid walled UPVC rather than the less robust foam cored versions available on the market.This plain ended pipe comes with pre-chamfered ends ready for insertion into a ring seal.When cutting pipes it is good practise to always chamfer the ends with a rasp or file prior to inserting into any fittings. SG100 Lubricant should be used whenever a joint is made. Pipes should generally be laid to a fall of 1:40 in drainage systems where there are less than five WCand#039;s discharging into the pipe.Please note that orders for pipe only (with an appropriate amount of fittings) will incur an additional delivery charge, which we will contact you about before dispatching your order.

GBP 25.85
1

FloPlast Ring Seal Soil Pipe Plain Ended - 110mm x 3mtr Anthracite Grey

FloPlast Ring Seal Soil Pipe Plain Ended - 110mm x 3mtr Anthracite Grey

Our 110mm PVC plain ended soil pipe is used for the above ground discharge of foul drainage from bathrooms, kitchens and utility rooms. Often called a soil stack in the trade, it is also sometimes referred to a stench pipe or stink pipe. Ring Seal Soil Systems_x000D_Ring Seal Soil and vent is the most commonly used soil system in domestic and non-industrial commercial properties in the UK. _x000D_Our FloPlast ring seal soil system is compatible with most other soil systems that are manufactured to British/European standard. _x000D_To install any pipe or fitting into another ring seal fitting, first make sure the end of the pipe has been chamfered. Clean off any dirt or debris and lubricate the joint with silicon lubricant. Push the pipe in squarely until resistance is felt, then withdraw it very slightly to allow for any potential system expansion.

GBP 42.85
1

FloPlast Ring Seal Soil Pipe Single Socket - 110mm x 3mtr Anthracite Grey - Pack of 2

FloPlast Ring Seal Soil Pipe Single Socket - 110mm x 3mtr Anthracite Grey - Pack of 2

Our 110mm PVC soil and vent pipe is used for the above ground discharge of foul drainage from bathrooms, kitchens and utility rooms. Often called a soil stack in the trade, it is also sometimes referred to a stench pipe or stink pipe._x000D_RING SEAL SOIL SYSTEMS_x000D_Ring Seal Soil and vent is the most commonly used soil system in domestic and non-industrial commercial properties in the UK._x000D_Our FloPlast ring seal soil system is compatible with most other soil systems that are manufactured to British/European standard._x000D_To install any pipe or fitting into another ring seal fitting, first make sure the end of the pipe has been chamfered. Clean off any dirt or debris and lubricate the joint with silicon lubricant. Push the pipe in squarely until resistance is felt, then withdraw it very slightly to allow for any potential system expansion.

GBP 37.84
1

FloPlast Solvent Weld Waste Coupling - 32mm White - Pack of 25

FloPlast Solvent Weld Waste Coupling - 32mm White - Pack of 25

Waste couplings are used to join together two lengths of pipe. This type of system utilises solvent cement to make the joint.This fitting is available in 32mm, 40mm and 50mm size options.Our solvent weld waste is manufactured in the UK to BS EN 1455 and is kitemarked.To make a solvent weld joint, first ensure that the outer wall of the pipe and the inner wall of the fitting are both clean and free from grit or swarf. Apply SC250 solvent cement to both surfaces. Push the pipe fully into the fitting and give it a twist to ensure that full contact has been made. Clean off any excess solvent with a damp cloth and leave for 5 minutes to set. The installation should be left for 12 hours before testing.Click here to watch a step by step video of how to make a solvent weld joint.Solvent weld joints are permanent - they cannot be demounted once the joint has been made. When using solvent cement, always work in a well ventilated area and keep the cement away from heat sources or naked flames. Avoid any contact with skin - if contact does occur then wash thoroughly with soap and water.

GBP 25.46
1

FloPlast Multi Fit Compression Waste Adjustable Bend - 0-90 Degree x 32mm

FloPlast Multi Fit Compression Waste Adjustable Bend - 0-90 Degree x 32mm

Adjustable bends can be used are used to create any angle between zero and 90 degrees in a waste pipe system. This is achieved by the use of two clever swivel joints within the body of the fitting.This fitting is available in 32mm and 40mm size options.This compression waste system is manufactured in the UK to BS EN 1451. It is commonly used to connect waste pipes of differing materials or those made by different manufacturers.When making a compression joint, cut the pipe square and remove any burrs. Unscrew the nut from the fitting and remove it along with the washer and the rubber seal. Place these three components over the end of the pipe andndash; first the nut, then the washer followed by the seal. The dished side of the rubber seal should face away from the nut and towards the fitting. Push the pipe into the fitting as far as it will go, slide the seal and washer forward into position in the fitting and tighten the nut.The joint can be taken apart again if required, but always check that the rubber seal has not been damaged in any way as this will cause the joint to leak.Click here to watch our video showing how to assemble a compression waste joint.

GBP 19.55
1

FloPlast Multi Fit Compression Waste Adjustable Bend - 0-90 Degree x 40mm

FloPlast Multi Fit Compression Waste Adjustable Bend - 0-90 Degree x 40mm

Adjustable bends can be used are used to create any angle between zero and 90 degrees in a waste pipe system. This is achieved by the use of two clever swivel joints within the body of the fitting.This fitting is available in 32mm and 40mm size options.This compression waste system is manufactured in the UK to BS EN 1451. It is commonly used to connect waste pipes of differing materials or those made by different manufacturers.When making a compression joint, cut the pipe square and remove any burrs. Unscrew the nut from the fitting and remove it along with the washer and the rubber seal. Place these three components over the end of the pipe andndash; first the nut, then the washer followed by the seal. The dished side of the rubber seal should face away from the nut and towards the fitting. Push the pipe into the fitting as far as it will go, slide the seal and washer forward into position in the fitting and tighten the nut.The joint can be taken apart again if required, but always check that the rubber seal has not been damaged in any way as this will cause the joint to leak.Click here to watch our video showing how to assemble a compression waste joint.

GBP 20.75
1

FloPlast Shiplap Cladding - 150mm x 5mtr Black Ash Woodgrain

FloPlast Shiplap Cladding - 150mm x 5mtr Black Ash Woodgrain

Our 150mm by 5 metre shiplap cladding panels are manufactured in the UK by FloPlast, and are BBA Approved.Shiplap cladding is our most popular cladding option due to the ability to cover wide areas and its traditional overlap appearance suitable for external use as a decorative or protective facing.Each 5m x 150mm panel covers an area of 0.75 square metres and can be fixed over brick, block, masonry and timber framed walling. Each board has a tough durable finish meaning it has a high impact strength and is finished with a weather resistant skin making it a low maintenance option which will retain its exceptional appearance.If you have never installed PVC Cladding before, we suggest you take a couple of minutes to watch our video which also explains how to measure how much cladding is needed:Is PVC Cladding Safe?Our FloPlast cladding boards carry a reaction to fire classification of D-s3, d2/(AHM). This means that the system is not classified as non-combustible and may be used on buildings with no storey 18m or more above the ground and 1m or more from a boundary. With minor exceptions, the system should be included in calculations of unprotected area.Although the spread-of-flame across the surface of PVC is limited, the material does tend to char and may fall away when exposed to fire. Due consideration should always be given to any combustible materials behind the cladding, which may become exposed in the event of fire. Where necessary, cavity barriers should be incorporated behind the cladding, as required under the relevant national Building Regulations.

GBP 35.54
1

FloPlast Shiplap Cladding - 150mm x 5mtr Anthracite Grey Woodgrain

FloPlast Shiplap Cladding - 150mm x 5mtr Anthracite Grey Woodgrain

Our 150mm by 5 metre shiplap cladding panels are manufactured in the UK by FloPlast, and are BBA Approved.Shiplap cladding is our most popular cladding option due to the ability to cover wide areas and its traditional overlap appearance suitable for external use as a decorative or protective facing.Each 5m x 150mm panel covers an area of 0.75 square metres and can be fixed over brick, block, masonry and timber framed walling. Each board has a tough durable finish meaning it has a high impact strength and is finished with a weather resistant skin making it a low maintenance option which will retain its exceptional appearance.If you have never installed PVC Cladding before, we suggest you take a couple of minutes to watch our video which also explains how to measure how much cladding is needed:Is PVC Cladding Safe?Our FloPlast cladding boards carry a reaction to fire classification of D-s3, d2/(AHM). This means that the system is not classified as non-combustible and may be used on buildings with no storey 18m or more above the ground and 1m or more from a boundary. With minor exceptions, the system should be included in calculations of unprotected area.Although the spread-of-flame across the surface of PVC is limited, the material does tend to char and may fall away when exposed to fire. Due consideration should always be given to any combustible materials behind the cladding, which may become exposed in the event of fire. Where necessary, cavity barriers should be incorporated behind the cladding, as required under the relevant national Building Regulations.

GBP 35.54
1

FloPlast Shiplap Cladding - 150mm x 5mtr Rosewood

FloPlast Shiplap Cladding - 150mm x 5mtr Rosewood

Our 150mm by 5 metre shiplap cladding panels are manufactured in the UK by FloPlast, and are BBA Approved.Shiplap cladding is our most popular cladding option due to the ability to cover wide areas and its traditional overlap appearance suitable for external use as a decorative or protective facing.Each 5m x 150mm panel covers an area of 0.75 square metres and can be fixed over brick, block, masonry and timber framed walling. Each board has a tough durable finish meaning it has a high impact strength and is finished with a weather resistant skin making it a low maintenance option which will retain its exceptional appearance.If you have never installed PVC Cladding before, we suggest you take a couple of minutes to watch our video which also explains how to measure how much cladding is needed:Is PVC Cladding Safe?Our FloPlast cladding boards carry a reaction to fire classification of D-s3, d2/(AHM). This means that the system is not classified as non-combustible and may be used on buildings with no storey 18m or more above the ground and 1m or more from a boundary. With minor exceptions, the system should be included in calculations of unprotected area.Although the spread-of-flame across the surface of PVC is limited, the material does tend to char and may fall away when exposed to fire. Due consideration should always be given to any combustible materials behind the cladding, which may become exposed in the event of fire. Where necessary, cavity barriers should be incorporated behind the cladding, as required under the relevant national Building Regulations.

GBP 35.54
1