ProfitSpring | B2B PPC Agency

Seasonic PRIME TX-1600 Noctua Edition ATX 3.1 -virtalähde, 80 Plus Titanium

Seasonic on tunnettu yhtenä huippuluokan tietokoneen virtalähteiden valmistajista, ja prime tx on heidän palkittu, 80 plus® titanium -sertifioitu lippulaivasarjansa, joka sisältää huipputeknologisia elektroniikkasuunnitelmia, ensiluokkaisia komponentteja, huipputasoisia suorituskykyjä ja poikkeuksellista tehokkuutta. Tx-1600-mallin noctua edition hyödyntää tätä upeaa alustaa ja yhdistää sen ikoniseen, uraauurtavaan nf-a12x25-venttiilijäähdytin sekä erityisesti suunnitellun, erittäin optimoidun tuulettimen grillin, joka mahdollistaa sen toimivan noin 8-10 db(a) hiljaisemmin kuin jo valmiiksi hiljainen vakiomalli. Semi-passiivisen tuulettimen ohjausasetuksen ansiosta tx-1600 noctua edition toimii täysin passiivisesti jopa noin 50% kuormituksessa tyypillisissä ympäristön lämpötiloissa (

EUR 598.90

1

Noctua NM-SD1 TORX TX20 -ruuvimeisseli

The nm-sd1 is a high-quality torx® t20 head screwdriver that is ideal for use with noctua’s secufirm2+™ mounting systems. Its 150mm long shaft makes it easy to reach the mounting screws of large cpu coolers and thanks to its magnetic tip, fixing screws in space-constrained environments such as tightly packed itx builds is a breeze. Featuring a large, comfortable grip, the nm-sd1 is the tool of choice for power users who operate secufirm2+™ systems.secufirm2+™ standard with torx®the new secufirm2+™ standard uses torx® t20 rather than phillips head screws. The reduced cam-out of the torx® drive makes it easier to operate, especially in space restricted environments such as pre-assembled pc systems. At the same time, there is less wear on the screw heads, which makes the plus version even more durable and perfect for power uses.150mm long shaftreaching the mounting screws of large tower style cpu coolers and applying sufficient pressure can be tricky, or depending on the design, even impossible with regular screwdrivers. Thanks to its 15cm long shaft, the nm-sd1 makes installing large heatsinks a breeze.magnetic tiptired of dropping screws in fully assembled systems when installing or removing coolers? The magnetic tip of the nm-sd1 is incredibly handy when space is tight and screws are hard to reach, such as in small form factor builds.large, comfortable gripthe large, comfortable grip of the nm-sd1 makes it a pleasure to operate and easy to apply pressure to spring-loaded mounting screws - ideal for power users who install and remove their coolers on a regular basis or professional system integrators who install dozens of coolers per day.

EUR 12.90

1

Noctua NA-IS1-14 Sx2 -kehikkosarja, 2 kpl

The na-is1-14 sx2 is a set of two 5mm thick intake side spacer frames for noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators. By offsetting the fan from the obstacle, the na-is1 inlet spacer reduces influx turbulences, which can, depending on the application and fan model, not only improve airflow but also significantly reduce overall noise levels and make the fan sound more pleasant to the ear. Designed to replace the fan’s stock na-avp1 anti-vibration pads, the na-is1-14 are compatible with all current square-frame noctua 140x25mm fans and extremely straightforward to install: for case fan applications, either the supplied self-tapping screws or the included na-av3 anti-vibration mounts can be used to sandwich the spacer between the fan and the case panel. For radiator mounting, both m3 and unc 6-32 screws are supplied. In sum, the na-is1-14 sx2 set is a simple yet highly effective fine-tuning measure for suction type applications where a reduction of influx turbulence can lead to improved airflow and acoustics.improving suction acousticssuction applications where fans draw air through obstacles such as grills or perforated panels are notoriously challenging acoustically due to the turbulences caused by these obstacles. Introducing a 5mm off-set between the fan and the obstacle, the na-is1 spacers can reduce these turbulences, which often improves noise levels and/or noise profiles significantly.more airflow, less noisereducing influx turbulences doesn’t only improve acoustics, it also helps fans to operate more efficiently from an airflow performance point of view because the fan blades are less hampered by turbulence. In many suction type applications, using inlet spacers can therefore enable fans to achieve higher flow rates and lower noise emissions at the same time.compatible with all current noctua 140x25mm fansreplacing the fan’s stock na-avp1 anti-vibration pads, the na-is1-14 are compatible with all current noctua square-frame 140x25mm fans such as the popular nf-a14 or nf-p14s redux series. Fans from other manufacturers are not supported.set of 2 (sx2)the na-is1-14 sx2 is a set of two spacer frames plus the matching anti-vibration mounts, fan screws and radiator screws – ideal for equipping e.g. Two 140mm intake fans in the front of a pc case or two 140mm fans on a 280mm radiator that’s installed in a front intake position.anti-vibration mounts and fan screwsfor use with case intake fans, the na-is1-14 sx2 contains eight long self-tapping fan screws and eight na-av3 silicone anti-vibration mounts for tool-free, vibration-proof installation. Both the screws and the anti-vibration mounts simply go through the holes in the spacer and attach to the fan, sandwiching the spacer between the fan and the case.radiator screwsfor use with water cooling radiators, the na-is1-14 sx2 contains 35mm long radiator screws, eight pieces with m3 thread and eight pieces with unc 6-32 thread so that customers can choose the correct type for their radiator.

EUR 18.90

1

Noctua NA-IS1-12 Sx2 -kehikkosarja, 2 kpl

The na-is1-12 sx2 is a set of two 5mm thick intake side spacer frames for noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators. By offsetting the fan from the obstacle, the na-is1 inlet spacer reduces influx turbulences, which can, depending on the application and fan model, not only improve airflow but also significantly reduce overall noise levels and make the fan sound more pleasant to the ear. Designed to replace the fan’s stock na-avp1 anti-vibration pads, the na-is1-12 are compatible with all current square-frame noctua 120x25mm fans and extremely straightforward to install: for case fan applications, either the supplied self-tapping screws or the included na-av3 anti-vibration mounts can be used to sandwich the spacer between the fan and the case panel. For radiator mounting, both m3 and unc 6-32 screws are supplied. In sum, the na-is1-12 sx2 set is a simple yet highly effective fine-tuning measure for suction type applications where a reduction of influx turbulence can lead to improved airflow and acoustics.improving suction acousticssuction applications where fans draw air through obstacles such as grills or perforated panels are notoriously challenging acoustically due to the turbulences caused by these obstacles. Introducing a 5mm off-set between the fan and the obstacle, the na-is1 spacers can reduce these turbulences, which often improves noise levels and/or noise profiles significantly.more airflow, less noisereducing influx turbulences doesn’t only improve acoustics, it also helps fans to operate more efficiently from an airflow performance point of view because the fan blades are less hampered by turbulence. In many suction type applications, using inlet spacers can therefore enable fans to achieve higher flow rates and lower noise emissions at the same time.compatible with all current noctua 120x25mm fansreplacing the fan’s stock na-avp1 anti-vibration pads, the na-is1-12 are compatible with all current noctua square-frame 120x25mm fans such as the popular nf-a12x25, nf-f12, nf-p12 redux or nf-s12a series. The slim nf-a12x15 or fans from other manufacturers are not supported.set of 2 (sx2)the na-is1-12 sx2 is a set of two spacer frames plus the matching anti-vibration mounts, fan screws and radiator screws – ideal for equipping e.g. Two 120mm intake fans in the front of a pc case or two 120mm fans on a 240mm radiator that’s installed in a front intake position.anti-vibration mounts and fan screwsfor use with case intake fans, the na-is1-12 sx2 contains eight long self-tapping fan screws and eight na-av3 silicone anti-vibration mounts for tool-free, vibration-proof installation. Both the screws and the anti-vibration mounts simply go through the holes in the spacer and attach to the fan, sandwiching the spacer between the fan and the case.radiator screwsfor use with water cooling radiators, the na-is1-12 sx2 contains 35mm long radiator screws, eight pieces with m3 thread and eight pieces with unc 6-32 thread so that customers can choose the correct type for their radiator.

EUR 18.90

1

Noctua NA-IS1-14 Sx2 chromax.black -kehikkosarja, 2 kpl

The na-is1-14 sx2 is a set of two 5mm thick intake side spacer frames for noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators. By offsetting the fan from the obstacle, the na-is1 inlet spacer reduces influx turbulences, which can, depending on the application and fan model, not only improve airflow but also significantly reduce overall noise levels and make the fan sound more pleasant to the ear. Designed to replace the fan’s stock na-avp1 anti-vibration pads, the na-is1-14 are compatible with all current square-frame noctua 140x25mm fans and extremely straightforward to install: for case fan applications, either the supplied self-tapping screws or the included na-av3 anti-vibration mounts can be used to sandwich the spacer between the fan and the case panel. For radiator mounting, both m3 and unc 6-32 screws are supplied. In sum, the na-is1-14 sx2 set is a simple yet highly effective fine-tuning measure for suction type applications where a reduction of influx turbulence can lead to improved airflow and acoustics.improving suction acousticssuction applications where fans draw air through obstacles such as grills or perforated panels are notoriously challenging acoustically due to the turbulences caused by these obstacles. Introducing a 5mm off-set between the fan and the obstacle, the na-is1 spacers can reduce these turbulences, which often improves noise levels and/or noise profiles significantly.more airflow, less noisereducing influx turbulences doesn’t only improve acoustics, it also helps fans to operate more efficiently from an airflow performance point of view because the fan blades are less hampered by turbulence. In many suction type applications, using inlet spacers can therefore enable fans to achieve higher flow rates and lower noise emissions at the same time.compatible with all current noctua 140x25mm fansreplacing the fan’s stock na-avp1 anti-vibration pads, the na-is1-14 are compatible with all current noctua square-frame 140x25mm fans such as the popular nf-a14 or nf-p14s redux series. Fans from other manufacturers are not supported.set of 2 (sx2)the na-is1-14 sx2 is a set of two spacer frames plus the matching anti-vibration mounts, fan screws and radiator screws – ideal for equipping e.g. Two 140mm intake fans in the front of a pc case or two 140mm fans on a 280mm radiator that’s installed in a front intake position.anti-vibration mounts and fan screwsfor use with case intake fans, the na-is1-14 sx2 contains eight long self-tapping fan screws and eight na-av3 silicone anti-vibration mounts for tool-free, vibration-proof installation. Both the screws and the anti-vibration mounts simply go through the holes in the spacer and attach to the fan, sandwiching the spacer between the fan and the case.radiator screwsfor use with water cooling radiators, the na-is1-14 sx2 contains 35mm long radiator screws, eight pieces with m3 thread and eight pieces with unc 6-32 thread so that customers can choose the correct type for their radiator.chromax.black versionthe all-black chromax.black version of the na-is1-14 spacers is a perfect match for black 140x25mm fans from noctua’s chromax and industrialppc product lines.

EUR 18.90

1

Noctua NA-IS1-12 chromax.black Sx2 -kehikkosarja, 2 kpl

The na-is1-12 sx2 is a set of two 5mm thick intake side spacer frames for noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills, perforated plates, mesh panels, filters or radiators. By offsetting the fan from the obstacle, the na-is1 inlet spacer reduces influx turbulences, which can, depending on the application and fan model, not only improve airflow but also significantly reduce overall noise levels and make the fan sound more pleasant to the ear. Designed to replace the fan’s stock na-avp1 anti-vibration pads, the na-is1-12 are compatible with all current square-frame noctua 120x25mm fans and extremely straightforward to install: for case fan applications, either the supplied self-tapping screws or the included na-av3 anti-vibration mounts can be used to sandwich the spacer between the fan and the case panel. For radiator mounting, both m3 and unc 6-32 screws are supplied. In sum, the na-is1-12 sx2 set is a simple yet highly effective fine-tuning measure for suction type applications where a reduction of influx turbulence can lead to improved airflow and acoustics. The chromax.black variant is a perfect match for black chromax or industrialppc line fans.caution: as influx turbulences vary between different fans models and setups (e.g. Different fan speeds, grill shapes, mesh patterns, overall flow resistance, etc.), it is not possible to reliably predict how much of an improvement adding inlet spacers will make. While the improvements are significant in most configurations, there sometimes may be little to no improvements and, in rare situations such as with particular slit-type grills, adding spacers may even lead to undesirable results with particular fan models.please see our performance guidelines for further information. If in doubt, detach the fan from your application, then hold it in place with no distance first and 5mm distance next. This will give you a rough indication of how much improvement you can expect in your individual configuration.improving suction acousticssuction applications where fans draw air through obstacles such as grills or perforated panels are notoriously challenging acoustically due to the turbulences caused by these obstacles. Introducing a 5mm off-set between the fan and the obstacle, the na-is1 spacers can reduce these turbulences, which often improves noise levels and/or noise profiles significantly.more airflow, less noisereducing influx turbulences doesn’t only improve acoustics, it also helps fans to operate more efficiently from an airflow performance point of view because the fan blades are less hampered by turbulence. In many suction type applications, using inlet spacers can therefore enable fans to achieve higher flow rates and lower noise emissions at the same time.compatible with all current noctua 120x25mm fansreplacing the fan’s stock na-avp1 anti-vibration pads, the na-is1-12 are compatible with all current noctua square-frame 120x25mm fans such as the popular nf-a12x25, nf-f12, nf-p12 redux or nf-s12a series. The slim nf-a12x15 or fans from other manufacturers are not supported.set of 2 (sx2)the na-is1-12 sx2 is a set of two spacer frames plus the matching anti-vibration mounts, fan screws and radiator screws – ideal for equipping e.g. Two 120mm intake fans in the front of a pc case or two 120mm fans on a 240mm radiator that’s installed in a front intake position.anti-vibration mounts and fan screwsfor use with case intake fans, the na-is1-12 sx2 contains eight long self-tapping fan screws and eight na-av3 silicone anti-vibration mounts for tool-free, vibration-proof installation. Both the screws and the anti-vibration mounts simply go through the holes in the spacer and attach to the fan, sandwiching the spacer between the fan and the case.radiator screwsfor use with water cooling radiators, the na-is1-12 sx2 contains 35mm long radiator screws, eight pieces with m3 thread and eight pieces with unc 6-32 thread so that customers can choose the correct type for their radiator.chromax.black versionthe all-black chromax.black version of the na-is1-12 spacers is a perfect match for black 120x25mm fans from noctua’s chromax and industrialppc product lines.

EUR 18.90

1

Noctua NF-A14 PWM chromax.black.swap, 140mm -kotelotuuletin, musta

Having received more than 100 awards and recommendations from international hardware websites and magazines, the nf-a14 is one of noctua’s most renowned and popular 140mm fans. Its square frame makes it ideal for use on water cooling radiators or as a case fan. The chromax.black.swap edition combines the nf-a14’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables, additional anti-vibration pads and anti-vibration mounts are available separately. Topped off with noctua’s trusted premium-grade sso2 bearing, more than 150,000 hours mttf and 6-year manufacturer’s warranty, the nf-a14 pwm chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance. Award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.chromax.black.swap editionmaximising colour choices, noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.swappable anti-vibration pads in 6 coloursthe nf-a14 pwm chromax.black.swap comes with 4 black, white, red, blue, green and yellow na-avp1 anti-vibration pads respectively. By combining the various colours with black or leaving off the pads on one side, the fan can be coordinated with most popular build colour schemes out of the box. Additional na-savp1 sets for outfitting both sides in one colour can be purchased separately.optional coloured cablesnoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black na-ec1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm na-ec1 cables plus corresponding na-yc1 y-cables are available separately.optional coloured anti-vibration mountsto complement the coloured anti-vibration pads included with the fans, users can purchase chromax line na-sav2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.square 140mm framethe nf-a14's square 140mm frame with 140mm mounting holes (124.5mm spacing) makes it a premium grade replacement for common 140mm case fans and perfect for use on 140mm water cooling radiators, where its square shape will ensure full coverage and best pressure performance.flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.sso2 bearingthe chromax line fans feature the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the chromax edition fans sport a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the chromax edition fans use noctua’s custom-designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at low speeds.6-year manufacturer’s warrantynoctua fans are renowned for th

EUR 29.90

1

Noctua NF-A15 HS, PWM, chromax.black.swap, 140mm -kotelotuuletin, musta

Having received more than 100 awards and recommendations from international hardware websites and magazines, the nf-a15 is one of noctua’s most renowned and popular 140mm fans. Its 150mm wide round frame with 120mm standard mounting holes (105mm hole spacing) makes it ideal for use on cpu coolers such as the popular nh-d15, nh-d15s or nh-u14s. The chromax.black.swap edition combines the nf-a15’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables and anti-vibration mounts are available separately. Topped off with noctua’s trusted premium grade sso2 bearing, more than 150,000 hours mttf and 6-year manufacturer’s warranty, the nf-a15 hs-pwm chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance. Award-winning nf-a15 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a15 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.chromax.black.swap editionmaximising colour choices, noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.swappable anti-vibration pads in 6 coloursthe nf-a15 hs-pwm chromax.black.swap comes with 8 black, white, red, blue, green and yellow anti-vibration pads respectively, which allows the fan to be fully colour-customised in order to coordinate it with other components or popular build schemes.optional coloured cablesnoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black na-ec1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm na-ec1 cables plus corresponding na-yc1 y-cables are available separately.optional coloured anti-vibration mountsto complement the coloured anti-vibration pads included with the fans, users can purchase chromax line na-sav2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.round 140mm frame with 150mm widththe nf-a15 is tailor-made for use on today's high-end cpu coolers: while its 150mm width matches those of most high-end heatsinks, its 140mm height doesn't make it extend on top and thus ensures best case compatibility. The nf-a15's standard 120mm mounting holes (105mm spacing) also make it an ideal performance upgrade for 120mm case or cpu fans.flow acceleration channelsthe nf-a15 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.sso2 bearingthe chromax line fans feature the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the chromax edition fans sport a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the chromax edition fans use noctua’s custom-designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at low speeds.6-year manufacturer’s warrantynoctua fans are renown

EUR 33.90

1

Noctua NF-S12A PWM chromax.black.swap 120mm -kotelotuuletin

Having received more than 100 awards and recommendations from international hardware websites and magazines, the nf-s12a is one of noctua’s most renowned and popular 120mm fans. Its outstanding airflow efficiency and superb acoustics make it ideal for case cooling and other low-impedance applications. The chromax.black.swap edition combines the nf-s12a’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables, additional anti-vibration pads and anti-vibration mounts are available separately. Topped off with noctua’s trusted premium-grade sso2 bearing, more than 150,000 hours mttf and 6-year manufacturer’s warranty, the nf-s12a pwm chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance. Award-winning nf-s12a designhaving received more than 100 awards and recommendations from the international press, noctua's nf-s12a has become a proven premium choice for 120mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.chromax.black.swap editionmaximising colour choices, noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.swappable anti-vibration pads in 6 coloursthe nf-s12a pwm chromax.black.swap comes with 4 black, white, red, blue, green and yellow na-avp1 anti-vibration pads respectively. By combining the various colours with black or leaving off the pads on one side, the fan can be coordinated with most popular build colour schemes out of the box. Additional na-savp1 sets for outfitting both sides in one colour can be purchased separately.optional coloured cablesnoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black na-ec1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm na-ec1 cables plus corresponding na-yc1 y-cables are available separately.optional coloured anti-vibration mountsto complement the coloured anti-vibration pads included with the fans, users can purchase chromax line na-sav2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.anti-stall knobsthe nf-s12a's anti-stall knobs reduce flow separation phenomena in medium to high impedance situations and thereby increase the fan's stall margin. This means that the nf-s12a is even more versatile than its renowned predecessor and can achieve better performance on heatsinks and radiators.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.sso2 bearingthe chromax line fans feature the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the chromax edition fans sport a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the chromax edition fans use noctua’s custom-designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at low speeds.6-year manufacturer’s warrantynoctua fans are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the chromax edition models feature an mtbf of more than 150,000 hours rating and come with a full 6-year manufacturer's warranty.

EUR 27.90

1

Noctua NF-F12, PWM, chromax.black.swap, 120mm -kotelotuuletin

Having received more than 100 awards and recommendations from international hardware websites and magazines, the nf-f12 is one of noctua’s most renowned and popular 120mm fans. Its outstanding static pressure performance and the focusedflow™ frame make it ideal for use on heatsinks and radiators. The chromax.black.swap edition combines the nf-f12’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables, additional anti-vibration pads and anti-vibration mounts are available separately. Topped off with noctua’s trusted premium-grade sso2 bearing, more than 150,000 hours mttf and 6-year manufacturer’s warranty, the nf-f12 pwm chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance. Award-winning nf-f12 designhaving received more than 150 awards and recommendations from the international press, noctua's nf-f12 has become a proven premium choice for 120mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.chromax.black.swap editionmaximising colour choices, noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.swappable anti-vibration pads in 6 coloursthe nf-f12 pwm chromax.black.swap comes with 4 black, white, red, blue, green and yellow na-avp1 anti-vibration pads respectively. By combining the various colours with black or leaving off the pads on one side, the fan can be coordinated with most popular build colour schemes out of the box. Additional na-savp1 sets for outfitting both sides in one colour can be purchased separately.heptaperf™ impellercustom designed for the new focused flow™ frame and to work in tandem with the eleven stator guide vanes, the nf-f12's seven blade heptaperf™ impeller has been carefully optimised to achieve a perfect balance between power and quietness.optional coloured cablesnoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black na-ec1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm na-ec1 cables plus corresponding na-yc1 y-cables are available separately.optional coloured anti-vibration mountsto complement the coloured anti-vibration pads included with the fans, users can purchase chromax line na-sav2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.focused flow™ framedesigned for pressure demanding applications such as heatsinks and radiators, the focused flow™ frame features eleven stator guide vanes that straighten, channel and focus the airflow, which allows the nf-f12 to rival the performance of conventional fans running at much faster speeds.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.varying angular distance and vortex control notchesthe nf-f12's stator guide vanes are set out in varying angular distance and feature vortex-control notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan's sound pattern more agreeable to the human ear.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.sso2 bearingthe chromax line fans feature the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the chromax edition fans sport a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsuppor

EUR 27.90

1

Noctua NM-M1-MP83 chromax.black -kiinnityssarja

The nm-m1-mp83 is an enthusiast-grade, multi-socket secufirm2+™ mounting-kit that represents an ideal upgrade for users who want to migrate their noctua cpu coolers to the new, torx® based secufirm2+™ standard or to the latest sockets that their cooler did not yet support at the time of purchase. Compatible with a wide range of noctua cpu coolers with 83mm mounting pitch since 2005 (see detailed compatibility information) and supporting all the latest desktop platforms from amd (am5 & am4) and intel (lga1851, lga1700, lga1200, lga115x), the nm-m1-mp83 provides an excellent, future-proof basis for air-cooled premium builds. On am5, the offset mounting option can significantly improve performance with typical reductions in cpu temperatures of 1-3°c. Like all secufirm2™ mountings, it combines outstanding reliability, optimal contact pressure and easy, straightforward installation. At the same time, following the new secufirm2+™ standard, it uses torx® t20 instead of phillips head screws for even better handling and resistance to wear. With the included magnetic tip nm-sd1 torx® t20 screwdriver, it is perfect for power users who frequently change their setups and demand the new gold standard in convenience and durability under heavy use. The chromax.black version with its all-black parts is an ideal match for noctua’s chromax.black line heatsinks.caution: please note that the nm-m1-mp83 is only compatible with heatsinks that have 83mm mounting pitch (see detailed compatibility information) and that the nm-m1-mp78 kit must be used for heatsinks with 78mm mounting pitch.chromax.black editionfor the chromax.black version, all screws, fastening brackets and mounting bars are treated with a premium-grade, highly wear-resistant black coating. Perfect for creating all-black builds with noctua’s chromax.black line coolers!secufirm2+™ standard with torx®the new secufirm2+™ standard uses torx® t20 instead of phillips head screws. The reduced cam-out of the torx® drive makes it easier to operate, especially in space restricted environments such as pre-assembled pc systems. At the same time, there is less wear on the screw heads, which makes the plus version even more durable and perfect for power users.nm-sd1 magnetic tip screwdriverthe nm-m1 sets include noctua’s nm-sd1 torx® t20 head screwdriver that is ideal for all the screws of the kit. Thanks to its magnetic tip and the 150mm long shaft, even remote screws in tightly packed environments such as itx or htpc builds are easy to handle without dropping.multi-socket supportthe nm-m1 sets are noctua’s most comprehensive multi-socket mounting-kits today: supporting amd am5 and am4 as well as intel lga1851, lga1700, lga1200, lga1151, lga1150, lga1155 and lga1156, it’s the ultimate kit for a wide range of upgrading or switching scenarios.offset mounting option for amd am5the nm-m1 includes noctua’s offset mounting bars for am5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact pressure right above the core complex die(s). This improved contact exactly at the processor’s hotspot can significantly reduce cpu temperatures with typical improvements in the range of 1-3°c.for noctua coolers with 83mm mounting pitchthe nm-m1-mp83 kit is compatible with a wide range of noctua cpu coolers that use 83mm mounting pitch, whereas heatsinks with 78mm mounting pitch must use the mp78 version. Please refer to our detailed compatibility information to check which kit is right for your cooler.cooler can be installed turned by 90°*installing a cooler turned by 90° can be desirable for airflow or compatibility reasons. The nm-m1 kits allow users to choose the orientation of the cooler according to their preferences both on amd and intel setups in order to ensure best compatibility and optimal alignment with the airflow path inside the case.perfect contact pressuresecufirm2™ mounting systems use high-grade coil springs to achieve perfect contact pressure. No guesswork regarding how far to tighten the mounting screws, no risk of damaging the socket with excessive pressure!integrated fastening bracketsnoctuas secufirm2™ systems feature fully integrated fastening brackets with pre-fixed pressure screws and springs, which greatly facilitates the installation process. No fiddling with loose screws and springs!tailor-made parts for amd and intelin order to cut costs, many manufacturers use cross-platform parts for both intel and amd, which can cause compatibility issues. Noctua’s secufirm2™ mounting system uses tailor-made parts for amd and intel in order to ensure optimal compatibility.trusted secufirm2™ qualityover the years, secufirm2™ has become synonymous with impeccable long-term stability and flawless craftsmanship. Enthusiast users and industry clients alike trust the time-tested quality of noctua's professional mounting systems.backwards compatibilitynoctua cpu coolers are renowned for being safe, long-term investm

EUR 27.90

1

Noctua NM-M1-MP83 -kiinnityssarja

The nm-m1-mp83 is an enthusiast-grade, multi-socket secufirm2+™ mounting-kit that represents an ideal upgrade for users who want to migrate their noctua cpu coolers to the new, torx® based secufirm2+™ standard or to the latest sockets that their cooler did not yet support at the time of purchase. Compatible with a wide range of noctua cpu coolers with 83mm mounting pitch since 2005 (see detailed compatibility information) and supporting all the latest desktop platforms from amd (am5 & am4) and intel (lga1851, lga1700, lga1200, lga115x), the nm-m1-mp83 provides an excellent, future-proof basis for air-cooled premium builds. On am5, the offset mounting option can significantly improve performance with typical reductions in cpu temperatures of 1-3°c. Like all secufirm2™ mountings, it combines outstanding reliability, optimal contact pressure and easy, straightforward installation. At the same time, following the new secufirm2+™ standard, it uses torx® t20 instead of phillips head screws for even better handling and resistance to wear. With the included magnetic tip nm-sd1 torx® t20 screwdriver, it is perfect for power users who frequently change their setups and demand the new gold standard in convenience and durability under heavy use.caution: please note that the nm-m1-mp83 is only compatible with heatsinks that have 83mm mounting pitch (see detailed compatibility information) and that the nm-m1-mp78 kit must be used for heatsinks with 78mm mounting pitch.secufirm2+™ standard with torx®the new secufirm2+™ standard uses torx® t20 instead of phillips head screws. The reduced cam-out of the torx® drive makes it easier to operate, especially in space restricted environments such as pre-assembled pc systems. At the same time, there is less wear on the screw heads, which makes the plus version even more durable and perfect for power users.nm-sd1 magnetic tip screwdriverthe nm-m1 sets include noctua’s nm-sd1 torx® t20 head screwdriver that is ideal for all the screws of the kit. Thanks to its magnetic tip and the 150mm long shaft, even remote screws in tightly packed environments such as itx or htpc builds are easy to handle without dropping.multi-socket supportthe nm-m1 sets are noctua’s most comprehensive multi-socket mounting-kits today: supporting amd am5 and am4 as well as intel lga1851, lga1700, lga1200, lga1151, lga1150, lga1155 and lga1156, it’s the ultimate kit for a wide range of upgrading or switching scenarios.offset mounting option for amd am5the nm-m1 includes noctua’s offset mounting bars for am5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact pressure right above the core complex die(s). This improved contact exactly at the processor’s hotspot can significantly reduce cpu temperatures with typical improvements in the range of 1-3°c.for noctua coolers with 83mm mounting pitchthe nm-m1-mp83 kit is compatible with a wide range of noctua cpu coolers that use 83mm mounting pitch, whereas heatsinks with 78mm mounting pitch must use the mp78 version. Please refer to our detailed compatibility information to check which kit is right for your cooler.cooler can be installed turned by 90°*installing a cooler turned by 90° can be desirable for airflow or compatibility reasons. The nm-m1 kits allow users to choose the orientation of the cooler according to their preferences both on amd and intel setups in order to ensure best compatibility and optimal alignment with the airflow path inside the case.perfect contact pressuresecufirm2™ mounting systems use high-grade coil springs to achieve perfect contact pressure. No guesswork regarding how far to tighten the mounting screws, no risk of damaging the socket with excessive pressure!integrated fastening bracketsnoctuas secufirm2™ systems feature fully integrated fastening brackets with pre-fixed pressure screws and springs, which greatly facilitates the installation process. No fiddling with loose screws and springs!tailor-made parts for amd and intelin order to cut costs, many manufacturers use cross-platform parts for both intel and amd, which can cause compatibility issues. Noctua’s secufirm2™ mounting system uses tailor-made parts for amd and intel in order to ensure optimal compatibility.trusted secufirm2™ qualityover the years, secufirm2™ has become synonymous with impeccable long-term stability and flawless craftsmanship. Enthusiast users and industry clients alike trust the time-tested quality of noctua's professional mounting systems.backwards compatibilitynoctua cpu coolers are renowned for being safe, long-term investments that can be used for several cpu generations. Accordingly, the nm-m1 kits are fully backwards compatible with many noctua coolers since 2005, so even 15-year-old coolers can be made compatible with the latest sockets.sustainabilityusing a cpu cooler across several platform generations instead of buying a new heatsink for each generation is not only economi

EUR 24.90

1

Noctua NM-M1-MP78 -kiinnityssarja

The nm-m1-mp78 is an enthusiast-grade, multi-socket secufirm2+™ mounting-kit that represents an ideal upgrade for users who want to migrate their noctua cpu coolers to the new, torx® based secufirm2+™ standard or to the latest sockets that their cooler did not yet support at the time of purchase. Compatible with a wide range of noctua cpu coolers with 78mm mounting pitch since 2005 (see detailed compatibility information) and supporting all the latest desktop platforms from amd (am5 & am4) and intel (lga1851, lga1700, lga1200, lga115x), the nm-m1-mp78 provides an excellent, future-proof basis for air-cooled premium builds. On am5, the offset mounting option can significantly improve performance with typical reductions in cpu temperatures of 1-3°c. Like all secufirm2™ mountings, it combines outstanding reliability, optimal contact pressure and easy, straightforward installation. At the same time, following the new secufirm2+™ standard, it uses torx® t20 instead of phillips head screws for even better handling and resistance to wear. With the included magnetic tip nm-sd1 torx® t20 screwdriver, it is perfect for power users who frequently change their setups and demand the new gold standard in convenience and durability under heavy use.caution: please note that the nm-m1-mp78 is only compatible with heatsinks that have 78mm mounting pitch (see detailed compatibility information) and that the nm-m1-mp83 kit must be used for heatsinks with 83mm mounting pitch.secufirm2+™ standard with torx®the new secufirm2+™ standard uses torx® t20 instead of phillips head screws. The reduced cam-out of the torx® drive makes it easier to operate, especially in space restricted environments such as pre-assembled pc systems. At the same time, there is less wear on the screw heads, which makes the plus version even more durable and perfect for power users.nm-sd1 magnetic tip screwdriverthe nm-m1 sets include noctua’s nm-sd1 torx® t20 head screwdriver that is ideal for all the screws of the kit. Thanks to its magnetic tip and the 150mm long shaft, even remote screws in tightly packed environments such as itx or htpc builds are easy to handle without dropping.multi-socket supportthe nm-m1 sets are noctua’s most comprehensive multi-socket mounting-kits today: supporting amd am5 and am4 as well as intel lga1851, lga1700, lga1200, lga1151, lga1150, lga1155 and lga1156, it’s the ultimate kit for a wide range of upgrading or switching scenarios.offset mounting option for amd am5the nm-m1 includes noctua’s offset mounting bars for am5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact pressure right above the core complex die(s). This improved contact exactly at the processor’s hotspot can significantly reduce cpu temperatures with typical improvements in the range of 1-3°c.for noctua coolers with 78mm mounting pitchthe nm-m1-mp78 kit is compatible with a wide range of noctua cpu coolers that use 78mm mounting pitch, whereas heatsinks with 83mm mounting pitch must use the mp83 version. Please refer to our detailed compatibility information to check which kit is right for your cooler.cooler can be installed turned by 90°*installing a cooler turned by 90° can be desirable for airflow or compatibility reasons. The nm-m1 kits allow users to choose the orientation of the cooler according to their preferences both on amd and intel setups in order to ensure best compatibility and optimal alignment with the airflow path inside the case.perfect contact pressuresecufirm2™ mounting systems use high-grade coil springs to achieve perfect contact pressure. No guesswork regarding how far to tighten the mounting screws, no risk of damaging the socket with excessive pressure!integrated fastening bracketsnoctuas secufirm2™ systems feature fully integrated fastening brackets with pre-fixed pressure screws and springs, which greatly facilitates the installation process. No fiddling with loose screws and springs!tailor-made parts for amd and intelin order to cut costs, many manufacturers use cross-platform parts for both intel and amd, which can cause compatibility issues. Noctua’s secufirm2™ mounting system uses tailor-made parts for amd and intel in order to ensure optimal compatibility.trusted secufirm2™ qualityover the years, secufirm2™ has become synonymous with impeccable long-term stability and flawless craftsmanship. Enthusiast users and industry clients alike trust the time-tested quality of noctua's professional mounting systems.backwards compatibilitynoctua cpu coolers are renowned for being safe, long-term investments that can be used for several cpu generations. Accordingly, the nm-m1 kits are fully backwards compatible with many noctua coolers since 2005, so even 15-year-old coolers can be made compatible with the latest sockets.sustainabilityusing a cpu cooler across several platform generations instead of buying a new heatsink for each generation is not only economi

EUR 24.90

1

Noctua NM-M1-MP78 chromax.black -kiinnityssarja

The nm-m1-mp78 is an enthusiast-grade, multi-socket secufirm2+™ mounting-kit that represents an ideal upgrade for users who want to migrate their noctua cpu coolers to the new, torx® based secufirm2+™ standard or to the latest sockets that their cooler did not yet support at the time of purchase. Compatible with a wide range of noctua cpu coolers with 78mm mounting pitch since 2005 (see detailed compatibility information) and supporting all the latest desktop platforms from amd (am5 & am4) and intel (lga1851, lga1700, lga1200, lga115x), the nm-m1-mp78 provides an excellent, future-proof basis for air-cooled premium builds. On am5, the offset mounting option can significantly improve performance with typical reductions in cpu temperatures of 1-3°c. Like all secufirm2™ mountings, it combines outstanding reliability, optimal contact pressure and easy, straightforward installation. At the same time, following the new secufirm2+™ standard, it uses torx® t20 instead of phillips head screws for even better handling and resistance to wear. With the included magnetic tip nm-sd1 torx® t20 screwdriver, it is perfect for power users who frequently change their setups and demand the new gold standard in convenience and durability under heavy use.caution: please note that the nm-m1-mp78 is only compatible with heatsinks that have 78mm mounting pitch (see detailed compatibility information) and that the nm-m1-mp83 kit must be used for heatsinks with 83mm mounting pitch.secufirm2+™ standard with torx®the new secufirm2+™ standard uses torx® t20 instead of phillips head screws. The reduced cam-out of the torx® drive makes it easier to operate, especially in space restricted environments such as pre-assembled pc systems. At the same time, there is less wear on the screw heads, which makes the plus version even more durable and perfect for power users.nm-sd1 magnetic tip screwdriverthe nm-m1 sets include noctua’s nm-sd1 torx® t20 head screwdriver that is ideal for all the screws of the kit. Thanks to its magnetic tip and the 150mm long shaft, even remote screws in tightly packed environments such as itx or htpc builds are easy to handle without dropping.multi-socket supportthe nm-m1 sets are noctua’s most comprehensive multi-socket mounting-kits today: supporting amd am5 and am4 as well as intel lga1851, lga1700, lga1200, lga1151, lga1150, lga1155 and lga1156, it’s the ultimate kit for a wide range of upgrading or switching scenarios.offset mounting option for amd am5the nm-m1 includes noctua’s offset mounting bars for am5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact pressure right above the core complex die(s). This improved contact exactly at the processor’s hotspot can significantly reduce cpu temperatures with typical improvements in the range of 1-3°c.for noctua coolers with 78mm mounting pitchthe nm-m1-mp78 kit is compatible with a wide range of noctua cpu coolers that use 78mm mounting pitch, whereas heatsinks with 83mm mounting pitch must use the mp83 version. Please refer to our detailed compatibility information to check which kit is right for your cooler.cooler can be installed turned by 90°*installing a cooler turned by 90° can be desirable for airflow or compatibility reasons. The nm-m1 kits allow users to choose the orientation of the cooler according to their preferences both on amd and intel setups in order to ensure best compatibility and optimal alignment with the airflow path inside the case.perfect contact pressuresecufirm2™ mounting systems use high-grade coil springs to achieve perfect contact pressure. No guesswork regarding how far to tighten the mounting screws, no risk of damaging the socket with excessive pressure!integrated fastening bracketsnoctuas secufirm2™ systems feature fully integrated fastening brackets with pre-fixed pressure screws and springs, which greatly facilitates the installation process. No fiddling with loose screws and springs!tailor-made parts for amd and intelin order to cut costs, many manufacturers use cross-platform parts for both intel and amd, which can cause compatibility issues. Noctua’s secufirm2™ mounting system uses tailor-made parts for amd and intel in order to ensure optimal compatibility.trusted secufirm2™ qualityover the years, secufirm2™ has become synonymous with impeccable long-term stability and flawless craftsmanship. Enthusiast users and industry clients alike trust the time-tested quality of noctua's professional mounting systems.backwards compatibilitynoctua cpu coolers are renowned for being safe, long-term investments that can be used for several cpu generations. Accordingly, the nm-m1 kits are fully backwards compatible with many noctua coolers since 2005, so even 15-year-old coolers can be made compatible with the latest sockets.sustainabilityusing a cpu cooler across several platform generations instead of buying a new heatsink for each generation is not only economi

EUR 27.90

1

Mærke

Butik

Pris (EUR)

Seasonic PRIME TX-1600 Noctua Edition ATX 3.1 -virtalähde, 80 Plus Titanium

Noctua NM-SD1 TORX TX20 -ruuvimeisseli

Noctua NA-IS1-14 Sx2 -kehikkosarja, 2 kpl

Noctua NA-IS1-12 Sx2 -kehikkosarja, 2 kpl

Noctua NA-IS1-14 Sx2 chromax.black -kehikkosarja, 2 kpl

Noctua NA-IS1-12 chromax.black Sx2 -kehikkosarja, 2 kpl

Noctua NF-A14 PWM chromax.black.swap, 140mm -kotelotuuletin, musta

Noctua NF-A15 HS, PWM, chromax.black.swap, 140mm -kotelotuuletin, musta

Noctua NF-S12A PWM chromax.black.swap 120mm -kotelotuuletin

Noctua NF-F12, PWM, chromax.black.swap, 120mm -kotelotuuletin

Noctua NM-M1-MP83 chromax.black -kiinnityssarja

Noctua NM-M1-MP83 -kiinnityssarja

Noctua NM-M1-MP78 -kiinnityssarja

Noctua NM-M1-MP78 chromax.black -kiinnityssarja

Powered by Cobiro