11 resultater (0,18914 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

White Fascia Capping Board Joint - 300mm

White Fascia Capping Board Joint - 300mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.92
1

Fascia Double End Joint Trim - 500mm x 35mm White

Fascia Double End Joint Trim - 500mm x 35mm White

Joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.92
1

Ogee Fascia Joiner - 300mm White

Ogee Fascia Joiner - 300mm White

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 4.34
1

White Fascia Capping Board Double End Joint - 500mm x 42mm

White Fascia Capping Board Double End Joint - 500mm x 42mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.92
1

White Fascia Capping Board Double End Corner - 500mm x 42mm

White Fascia Capping Board Double End Corner - 500mm x 42mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.20
1

Fascia Double End Corner Trim - 500mm x 35mm White

Fascia Double End Corner Trim - 500mm x 35mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.55
1

White Fascia Capping Board External Corner - 300mm

White Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.34
1

Smooth Single Wall Electric Duct Coupler for 38mm duct

Smooth Single Wall Electric Duct Coupler for 38mm duct

Our heavy duty PVC PolyDuct joiners are used to make a connection between two lengths of 38mm or 50mm polyduct. The connection is pushfit to enable the joint to be taken apart in the future if required.Sometimes referred to as Class 2 power duct, this product is designed for use on low voltage (230v) electrical systems. Made from strong HDPE (High Density Polyethylene), it has excellent crush resistance.Our polyduct is resistant to most liquids and corrosive products, as well as fungal contamination.It remains flexible even at temperatures below freezing, enabling easy installation in even the most extreme weather conditions.

GBP 3.52
1

White Fascia Capping Board Internal Corner - 300mm

White Fascia Capping Board Internal Corner - 300mm

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.98
1

Smooth Single Wall Electric Duct Coupler for 32mm duct

Smooth Single Wall Electric Duct Coupler for 32mm duct

Our heavy duty PVC Electric Duct joiners are used to make a connection between two lengths of 32mmandnbsp; electric duct.The connection is pushfit to enable the joint to be taken apart in the future if required.Sometimes referred to as Class 2 power duct, this product is designed for use on low voltage (230v) electrical systems. Made from strong HDPE (High Density Polyethylene), it has excellent crush resistance.Our polyduct is resistant to most liquids and corrosive products, as well as fungal contamination.It remains flexible even at temperatures below freezing, enabling easy installation in even the most extreme weather conditions.

GBP 3.16
1

Smooth Single Wall Electric Duct Coupler - 50mm

Smooth Single Wall Electric Duct Coupler - 50mm

Our heavy duty PVC Electric Duct joiners are used to make a connection between two lengths of 38mm or 50mm electric duct. The connection is pushfit to enable the joint to be taken apart in the future if required.Sometimes referred to as Class 2 power duct, this product is designed for use on low voltage (230v) electrical systems. Made from strong HDPE (High Density Polyethylene), it has excellent crush resistance.Our polyduct is resistant to most liquids and corrosive products, as well as fungal contamination.It remains flexible even at temperatures below freezing, enabling easy installation in even the most extreme weather conditions.

GBP 3.54
1