ProfitSpring | B2B PPC Agency

Inspection Chamber Set - 450mm Diameter x 960mm Depth with 110mm Channel andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 970mm deep. It features a main channel of 110mm and has an addidtional 2 x 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself. As part of Turtle Enviroand#039;s orange range, this chamber is designed for use in foul and surface water systems.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installation.Arrives factory assembled in one piece.Fits all 110mm drainage pipes.Lightweight and requires no specialist equipment to lift.Chambers 1500mm and deeper are supplied with standard restriction capGranular backfill.Complies with EN 13598-2 (2009).4 x 110mm inlets.NOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.

GBP 309.00

1

Inspection Chamber Set - 450mm Diameter x 1040mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 1040mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 336.98

1

Inspection Chamber Set - 450mm Diameter x 1030mm Depth with 160mm Channel andamp; 160mm andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 990mm deep. It features a main channel of 160mm, an additional two 160mm inlets at 90 degrees and another two 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 160mm andamp; 2 x 110mm inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 336.98

1

Inspection Chamber Set - 450mm Diameter x 2015mm Depth with 160mm Channel andamp; 160mm andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 2015mm deep. It features a main channel of 160mm, an additional two 160mm inlets at 90 degrees and another two 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 160mm andamp; 2 x 110mm inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 429.94

1

Inspection Chamber Set - 450mm Diameter x 1550mm Depth with 160mm Channel andamp; 160mm andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 1500mm deep. It features a main channel of 160mm, an additional two 160mm inlets at 90 degrees and another two 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 160mm andamp; 2 x 110mm inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 383.46

1

Inspection Chamber Set - 450mm Diameter x 1560mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 1530mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Restrictor Cap not included.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 379.57

1

Inspection Chamber Set - 450mm Diameter x 2020mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 2020mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Restrictor Cap not included.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 422.20

1

Inspection Chamber Base - 450mm Diameter with 150mm Channel andamp; 150mm Inlets

This inspection chamber base has a diameter of 450mm and features a main twinwall channel of 150mm, an additional two 150mm inlets at 90 degrees.This inspection chamber base has a diameter of 450mm and features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Riser not IncludedOur inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.andnbsp;KEY FEATURES andamp; BENEFITS OF THIS PRODUCTandnbsp;Quick and simple installationandnbsp;Arrives factory assembled in one pieceandnbsp;Design life of 60 yearsandnbsp;Lightweight and requires no specialist equipment to liftandnbsp;Compatible with most UK twinwall pipe systemsandnbsp;Granular backfill_Complies with EN 13598-2 (2009), SfA7 and Building Regulations Part H1andnbsp;4 x 150mm twinwall inletsandnbsp;andnbsp;To view Turtleand#039;s installation guide for twinwall inspection chambers,andnbsp;click here.

GBP 251.76

1

Inspection Chamber Set - 450mm Diameter x 1480mm Depth with 110mm Channel andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 1485mm deep. It features a main channel of 110mm and has an addidtional 2 x 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself. As part of Turtle Enviroand#039;s orange range, this chamber is designed for use in foul and surface water systems.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installation.Arrives factory assembled in one piece.Fits all 110mm drainage pipes.Lightweight and requires no specialist equipment to lift.Chambers 1500mm and deeper are supplied with standard restriction capGranular backfill.Complies with EN 13598-2 (2009).4 x 110mm inlets.NOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.

GBP 356.34

1

Inspection Chamber Set - 450mm Diameter x 1940mm Depth with 110mm Channel andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 2000mm deep. It features a main channel of 110mm and has an addidtional 2 x 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself. As part of Turtle Enviroand#039;s orange range, this chamber is designed for use in foul and surface water systems.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installation.Arrives factory assembled in one piece.Fits all 110mm drainage pipes.Lightweight and requires no specialist equipment to lift.Chambers 1500mm and deeper are supplied with standard restriction capGranular backfill.Complies with EN 13598-2 (2009).4 x 110mm inlets.NOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.

GBP 402.82

1

Mærke

Butik

Pris (EUR)