M6 - Wing Nut - BZP - Bag of 10

M6 x 12mm - Roofing Bolt with Nut - BZP - Bag of 25

M10 - Full Nut Hexagon Grade 8 DIN 934 - BZP - Bag of 10

6mm x 50mm - Coach Screw Hexagon DIN 571 - BZP - Bag of 10

12mm x 100mm - Coach Screw Hexagon DIN 571 - BZP - Bag of 4

No8 x 1andquot; - Self Tapping Screw Pozidrive Countersunk AB - BZP - Bag of 50

Drywall Screw Phillips Wafer Head Drill Point - 4.2mm x 13mm BZP - Bag of 30

No8 x 3/4andquot;- Self Tapping Screw Pozidrive Pan AB - BZP - Bag of 50

No10 x 1andquot;- Self Tapping Screw Pozidrive Pan AB DIN 7981 - BZP - Bag of 50

No8 x 1 1/2andquot; - Self Tapping Screw Pozidrive Countersunk AB - BZP - Bag of 25

No8 x 1 1/4andquot;- Self Tapping Screw Pozidrive Pan AB - BZP - Bag of 25

8mm x 50mm - Anchor Thunder Concrete Bolts - Flange Head - 6mm - Drill Size - Bag of 6

M10 x 65mm - Coach Bolt with Nut Grade 4.6 DIN 603 - BZP - Bag of 5

M6 x 75mm - Coach Bolt with Nut Grade 4.6 DIN 603 - BZP - Bag of 10

No10 x 1 1/2andquot; - Self Tapping Screw Pozidrive Countersunk AB - BZP - Bag of 25

FloPlast Mini Gutter Fascia Bracket - 76mm Brown

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.The bracket is screwed to the supporting timber a single countersunk screw (we recommend 5 x 25m). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.Mini Gutter fascia brackets should be spaced at 1m centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres to 800mm.

FloPlast Mini Gutter External Stopend - 76mm Black

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

FloPlast Mini Gutter Fascia Bracket - 76mm White

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.The bracket is screwed to the supporting timber a single countersunk screw (we recommend 5 x 25m). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.Mini Gutter fascia brackets should be spaced at 1m centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres to 800mm.

FloPlast Mini Gutter Fascia Bracket - 76mm Black

Fascia brackets, also known as gutter brackets or gutter clips, are the main supports for the gutter system.The bracket is screwed to the supporting timber a single countersunk screw (we recommend 5 x 25m). The gutter is then clipped in place by first sliding the back edge in under the rear clip and pulling gently down on the front edge to clip the gutter into position.Mini Gutter fascia brackets should be spaced at 1m centres, although if you live in an area that is prone to heavy snowfall we suggest reducing the centres to 800mm.

FloPlast Mini Gutter External Stopend - 76mm Brown

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

FloPlast Mini Gutter External Stopend - 76mm White

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Anthracite Grey

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

FloPlast Half Round Gutter External Stopend - 112mm Grey

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;

FloPlast Deepflow/ Hi-Cap Gutter Internal Stopend - 115mm x 75mm Brown

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber sealYou can compare both types of stopends, internal and external, in our short PBSL Group video below;

FloPlast Square Gutter External Stopend - 114mm Black

External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.You can view our short PBSL Group product review below;