ProfitSpring | B2B PPC Agency

Steel Gutter Hopper - for 87mm Outlet Galvanised

Hoppers are used to bring together a collection of flows into one downpipe. Usually this would be different rainwater pipes from various sections of a roof coming together, such as pipes from a main roof and a porch roof. Our steel hoppers are an attractive item that is fabricated especially for the UK market.The hopper is essentially an open box into which the upper pipes discharge. The lower section of the hopper connects to the 87mm downpipe.On occasion if there is a combined system of drainage on much older properties, hoppers are used to feed waste pipes from a bathroom into a rainwater downpipe. As combined drainage systems are no longer in use for new properties this is a much less common use for a hopper.

GBP 214.81

1

Square Steel Gutter Hopper - Graphite

Hoppers are used to bring together a collection of flows into one downpipe. Usually this would be different rainwater pipes from various sections of a roof coming together, such as pipes from a main roof and a porch roof. Our steel hoppers are an attractive item that is fabricated especially for the UK market.The hopper is essentially an open box into which the upper pipes discharge. The lower section of the hopper connects to the 87mm downpipe.On occasion if there is a combined system of drainage on much older properties, hoppers are used to feed waste pipes from a bathroom into a rainwater downpipe. As combined drainage systems are no longer in use for new properties this is a much less common use for a hopper.

GBP 207.83

1

Steel Gutter Hopper - for 100mm Outlet Galvanised

Hoppers are used to bring together a collection of flows into one downpipe. Usually this would be different rainwater pipes from various sections of a roof coming together, such as pipes from a main roof and a porch roof. Our steel hoppers are an attractive item that is fabricated especially for the UK market.The hopper is essentially an open box into which the upper pipes discharge. The lower section of the hopper connects to the 100mm downpipe.On occasion if there is a combined system of drainage on much older properties, hoppers are used to feed waste pipes from a bathroom into a rainwater downpipe. As combined drainage systems are no longer in use for new properties this is a much less common use for a hopper.

GBP 214.81

1

Inspection Chamber Base - 450mm Diameter with 150mm Channel andamp; 150mm Inlets

This inspection chamber base has a diameter of 450mm and features a main twinwall channel of 150mm, an additional two 150mm inlets at 90 degrees.This inspection chamber base has a diameter of 450mm and features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Riser not IncludedOur inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.andnbsp;KEY FEATURES andamp; BENEFITS OF THIS PRODUCTandnbsp;Quick and simple installationandnbsp;Arrives factory assembled in one pieceandnbsp;Design life of 60 yearsandnbsp;Lightweight and requires no specialist equipment to liftandnbsp;Compatible with most UK twinwall pipe systemsandnbsp;Granular backfill_Complies with EN 13598-2 (2009), SfA7 and Building Regulations Part H1andnbsp;4 x 150mm twinwall inletsandnbsp;andnbsp;To view Turtleand#039;s installation guide for twinwall inspection chambers,andnbsp;click here.

GBP 251.76

1

Inspection Chamber Set - 450mm Diameter x 1550mm Depth with 160mm Channel andamp; 160mm andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 1500mm deep. It features a main channel of 160mm, an additional two 160mm inlets at 90 degrees and another two 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 160mm andamp; 2 x 110mm inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 383.46

1

Inspection Chamber Set - 450mm Diameter x 1560mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 1530mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Restrictor Cap not included.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 379.57

1

Inspection Chamber Set - 450mm Diameter x 2020mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 2020mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Restrictor Cap not included.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 422.20

1

Inspection Chamber Set - 450mm Diameter x 1040mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 1040mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 336.98

1

Inspection Chamber Set - 450mm Diameter x 1030mm Depth with 160mm Channel andamp; 160mm andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 990mm deep. It features a main channel of 160mm, an additional two 160mm inlets at 90 degrees and another two 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 160mm andamp; 2 x 110mm inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 336.98

1

Inspection Chamber Set - 450mm Diameter x 2015mm Depth with 160mm Channel andamp; 160mm andamp; 110mm Inlets

This inspection chamber has a diameter of 450mm and is 2015mm deep. It features a main channel of 160mm, an additional two 160mm inlets at 90 degrees and another two 110mm inlets at 45 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 160mm andamp; 2 x 110mm inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 429.94

1

Forest Garden Apex Overlap Shed - 6and#039; x 4and#039;

Our Forest Garden Overlap Garden Shed 6and#039; x 4and#039; with windows offers a clutter-free and secure storage solution for all your gardening equipment. This wooden shed boasts an improved modular design with thicker panels delivered in sections for easier assembly and superior strength. Backed by 30% thicker framing than typical sheds, it features 7mm overlapping boards that allow natural wood movement while promoting water runoff. The pressure treatment provides a 25 Year Anti-rot Guarantee, eliminating the need for future preservative treatments.Unlike sheds with OSB flooring, this one has an extra-thick 14mm solid timber floor to support heavier items. The apex roof consists of a durable 8mm solid sheet topped with a green sand-felt cover for complete weatherproofing. The shedand#039;s double-Z framed door has hidden hinges and a hasp for securing with a padlock (not included). It can open from the left or right side. Shatter-proof PET glazed windows provide security without yellowing over time.Aesthetically, the traditional apex roof design with smooth barge boards and a diamond finial creates an attractive garden addition. Handcrafted in the UK from FSC-certified timber, it includes all fixtures and clear instructions.

GBP 418.43

1

Catchpit Chamber - 300mm Diameter Base Only 110mm Pipes

300mm diameter catchpit chamber base with 110mm drainage pipe inlet and outlet.Our Catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.Our Catchpit Chambers are factory assembled and come in one piece.Catchpit Chambers Features andamp; Benefits275mm deep sumpStandard Restriction Cap supplied with 1500mm andamp; 2000mm deep chambers to comply with SfA7110mm drainage pipe options to fit underground drainage systemsOptional inlets available to suit site requirementsThese catchpit chambers are manufactured in the UK to BS EN 13598-2 (2009).To find out how to install your catchpit chamber view our general installation guide.Inlets andamp; OutletStandard outlet will always be at 0 degrees and unless requested at checkout the standard inlet will be at 180 degrees.Further inlets can be accommodated dependant on the diameter and position required. The diagram shows the preferred options if multiple inlets are required.We will advise on the suitability once we have the details of your requirement.

GBP 185.92

1

Sampling andamp; Distribution Chamber - 300mm Diameter Accesso with 110mm or 160mm Inlet / Outlet andamp; 110mm Side Distribution Channels with Lid

Single piece - 350mm Sampling andamp; Distribution Chamber with 110mm or 160mm main inlet and outlet and two 110mm side distribution outlet with square section A15 loading access cover.This combined sampling and distribution chamber comes as a one-piece unit and is ready to install with no assembly required. Featuring a robust, impact-resistant moulded base it comes with a choice of 110mm and 160mm main pipe connections. There are also two further 110mm moulded spigots at 90 degrees. It comes with a square section lockable access cover - A15 loading.Depth with cover: 1465mmInlet Invert: 1225mmSupplied with A15 loading- square lockable access cover.andnbsp;Features and Benefits of Sampling andamp; Distribution Chamber:One piece - Factory-built unitRobust - Impact-resistant rota moulded baseManufactured using Chemical Resistant PlasticLightweight - No machinery or lifting equipment requiredQuick and simple to installOption of 110/160mm inlet and outletMeets all Water Company and Building RegulationsLevel invert outlet - (No Sump)Three 110mm outlets for distribution to drainage fieldInlet has 210mm step from inlet to outlet sampling point75mm internal throat for easier samplingDepths can be increased if requiredRobust Lockable Access Cover providedGranular installation60-year Design LifeManufactured in the UKComplies Building Regulations - H2 1.23 - the sampling of septic tanks and wastewater treatment plants is a requirement of all UK Water Companies, and is included in the and#039;Consent to Dischargeand#039; issued by the Environment Agency.To view Turtleand#039;s installation guide for Accesso Chambers, click here.This product has a delivery lead time of approximately 5-7 working days.Please take a look at the Sampling andamp; Distribution Chamber data sheet for more information.

GBP 333.08

1

Mærke

Butik

Pris (EUR)