517 resultater (0,26901 sekunder)

Vis alle filtre

Mærke

Vis alle

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

FloPlast Drainage Channel Access Pipe Plain Ended - 1mtr x 110mm

FloPlast Drainage Channel Access Pipe Plain Ended - 1mtr x 110mm

Channel access pipes are usually used in situations where a standard plastic inspection chamber cannot be used.A concrete or brick inspection chamber or manhole is constructed around the channel access pipe, which is benched into a mortar or concrete mix. This allows the drain to be accessed for testing, inspection and cleaning in the normal manner.Each end of the access pipe is chamfered to enable a swift connection to a 110mm socketed pipe, coupling or other ring seal fitting.

GBP 34.32
1

SHED BASE PTR 8and#039; x 8and#039; (Home Delivery)

SHED BASE PTR 8and#039; x 8and#039; (Home Delivery)

Our shed bases are a quick and easy to build foundation for the range of shiplap and overlap sheds that we offer from Forest Garden. Timber shed bases are a budget-friendly alternative to more traditional shed base methods such as using slabs or pouring concrete. The timber that these bases are constructed from features a 15-year anti-rot guarantee and an additional benefit that they offer is that they will raise the shed off of the ground slightly which will prevent the splash back of water during periods of heavy rain. All of the required screws for assembling these shed bases are included. All shed bases should be installed on even ground and whilst we wouldn’t recommend fitting a shed base on grass, it can be done if sufficient weed membrane is used.

GBP 110.83
1

SHED BASE PTR 6and#039; x 6and#039; (Home Delivery)

SHED BASE PTR 6and#039; x 6and#039; (Home Delivery)

Our shed bases are a quick and easy to build foundation for the range of shiplap and overlap sheds that we offer from Forest Garden. Timber shed bases are a budget-friendly alternative to more traditional shed base methods such as using slabs or pouring concrete. The timber that these bases are constructed from features a 15-year anti-rot guarantee and an additional benefit that they offer is that they will raise the shed off of the ground slightly which will prevent the splash back of water during periods of heavy rain. All of the required screws for assembling these shed bases are included. All shed bases should be installed on even ground and whilst we wouldn’t recommend fitting a shed base on grass, it can be done if sufficient weed membrane is used.

GBP 94.99
1

FloPlast Drainage Long Radius Channel Bend Plain Ended - 45 Degree x 110mm

FloPlast Drainage Long Radius Channel Bend Plain Ended - 45 Degree x 110mm

Channel access bends are commonly used in situations where a standard plastic inspection chamber cannot be used. They are used to give a longer, more sweeping curve when changing direction in a drainage system. This makes inspection and cleaning a simpler task.A concrete or brick inspection chamber or manhole is usually constructed around the channel access pipe, which is benched into a mortar or concrete mix. This allows the drain to be accessed for testing, inspection and cleaning in the normal manner.Each end of the channel bend pipe is chamfered to enable a swift connection to a 110mmsocketed pipe,coupling or other ring seal fitting.

GBP 32.99
1

FloPlast Drainage Long Radius Channel Bend Plain Ended - 87.5 Degree x 110mm

FloPlast Drainage Long Radius Channel Bend Plain Ended - 87.5 Degree x 110mm

Channel access bends are commonly used in situations where a standard plastic inspection chamber cannot be used. They are used to give a longer, more sweeping curve when changing direction in a drainage system. This makes inspection and cleaning a simpler task.A concrete or brick inspection chamber or manhole is usually constructed around the channel access pipe, which is benched into a mortar or concrete mix. This allows the drain to be accessed for testing, inspection and cleaning in the normal manner.Each end of the channel bend pipe is chamfered to enable a swift connection to a 110mmsocketed pipe,coupling or other ring seal fitting.

GBP 32.99
1

Inspection Chamber Set - 600mm Diameter x 1965mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 1965mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 1965mm deep. It features a main twinwall channel of 150mm and an additional two 150mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 890.86
1

Inspection Chamber Set - 600mm Diameter x 2350mm Depth with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 2350mm Depth with 225mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 2350mm deep. It features a main twinwall channel of 225mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 1030.27
1

Inspection Chamber Set - 600mm Diameter x 1510mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 1510mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 1510mm deep. It features a main twinwall channel of 150mm and an additional two 150mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 813.38
1

Inspection Chamber Set - 600mm Diameter x 896mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 896mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 990mm deep. It features a main twinwall channel of 150mm and an additional two 150mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 658.45
1

Inspection Chamber Set - 600mm Diameter x 2355mm Depth with 150mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 2355mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 2355mm deep. It features a main twinwall channel of 150mm and an additional two 150mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 968.32
1

Inspection Chamber Set - 600mm Diameter x 1960mm Depth with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 1960mm Depth with 225mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 1960mm deep. It features a main twinwall channel of 225mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 952.82
1

Inspection Chamber Base - 600mm Diameter with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Base - 600mm Diameter with 225mm Channel andamp; 225mm Inlets

This inspection chamber base has a diameter of 600mm and features a main twinwall channel of 225mm, an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for twinwall inspection chambers,andnbsp;click here.

GBP 565.49
1

Inspection Chamber Set - 600mm Diameter x 1570mm Depth with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 1570mm Depth with 225mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 1570mm deep. It features a main twinwall channel of 225mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 875.34
1

Inspection Chamber Set - 600mm Diameter x 1090mm Depth with 225mm Channel andamp; 225mm Inlets

Inspection Chamber Set - 600mm Diameter x 1090mm Depth with 225mm Channel andamp; 225mm Inlets

This inspection chamber has a diameter of 600mm and is 1090mm deep. It features a main twinwall channel of 225mm and an additional two 225mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 225mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 720.43
1

Inspection Chamber Set - 600mm Diameter x 1510mm Depth with 200mm Channel andamp; 200mm Inlets

Inspection Chamber Set - 600mm Diameter x 1510mm Depth with 200mm Channel andamp; 200mm Inlets

This inspection chamber has a diameter of 600mm and is 1510mm deep. It features a main twinwall channel of 200mm and an additional two 200mm inlets at 90 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 200mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 381.75
1

Melbury Log Cabin - 24kg Polyester Felt Plus Underlay Double Glazed - 4000mm x 3000mm

Melbury Log Cabin - 24kg Polyester Felt Plus Underlay Double Glazed - 4000mm x 3000mm

Melbury cabins offer a large sheltered outdoor space that is suitable for a wide variety of uses such as a home gym, multi-person home office or hobby room. It features a pent style of roof which helps to give off a modern and sophisticated appearance. These cabins’ walls are crafted from 34mm machined interlocking log cladding and the ceiling and floor are made up of 19mm tongue and groove wooden boards. Tear-resistant polyester felt lines the roof exterior and features a fibre base layer that makes it extremely robust. This cabin features an internal floor area of 108 square feet and two fixed front windows, as well as a double side window.

GBP 4558.93
1

Melbury Log Cabin - 34kg Polyester Felt Plus Underlay Double Glazed - 4000mm x 3000mm

Melbury Log Cabin - 34kg Polyester Felt Plus Underlay Double Glazed - 4000mm x 3000mm

Melbury cabins offer a large sheltered outdoor space that is suitable for a wide variety of uses such as a home gym, multi-person home office or hobby room. It features a pent style of roof which helps to give off a modern and sophisticated appearance. These cabins’ walls are crafted from 34mm machined interlocking log cladding and the ceiling and floor are made up of 19mm tongue and groove wooden boards. Tear-resistant polyester felt lines the roof exterior and features a fibre base layer that makes it extremely robust. This cabin features an internal floor area of 108 square feet and two fixed front windows, as well as a double side window.

GBP 4613.94
1

Melbury Log Cabin - 24kg Polyester Felt No Underlay - 4000mm x 3000mm

Melbury Log Cabin - 24kg Polyester Felt No Underlay - 4000mm x 3000mm

Melbury cabins offer a large sheltered outdoor space that is suitable for a wide variety of uses such as a home gym, multi-person home office or hobby room. It features a pent style of roof which helps to give off a modern and sophisticated appearance. These cabins’ walls are crafted from 34mm machined interlocking log cladding and the ceiling and floor are made up of 19mm tongue and groove wooden boards. Tear-resistant polyester felt lines the roof exterior and features a fibre base layer that makes it extremely robust. This cabin features an internal floor area of 108 square feet and two fixed front windows, as well as a double side window.

GBP 4015.55
1

Melbury Log Cabin - 24kg Polyester Felt Plus Underlay - 4000mm x 3000m

Melbury Log Cabin - 24kg Polyester Felt Plus Underlay - 4000mm x 3000m

Melbury cabins offer a large sheltered outdoor space that is suitable for a wide variety of uses such as a home gym, multi-person home office or hobby room. It features a pent style of roof which helps to give off a modern and sophisticated appearance. These cabins’ walls are crafted from 34mm machined interlocking log cladding and the ceiling and floor are made up of 19mm tongue and groove wooden boards. Tear-resistant polyester felt lines the roof exterior and features a fibre base layer that makes it extremely robust. This cabin features an internal floor area of 108 square feet and two fixed front windows, as well as a double side window.

GBP 4076.04
1

Inspection Chamber Set - 600mm Diameter x 1930mm Depth with 225mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 1930mm Depth with 225mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 1930mm deep. It features a main twinwall channel of 225mm and an additional two 150mm inlets at 60 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 225mm andamp; 2 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 890.86
1

Inspection Chamber Set - 600mm Diameter x 1060mm Depth with 225mm Channel andamp; 150mm Inlets

Inspection Chamber Set - 600mm Diameter x 1060mm Depth with 225mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 600mm and is 1090mm deep. It features a main twinwall channel of 225mm and an additional two 150mm inlets at 60 degrees.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H12 x 225mm andamp; 2 x 150mm twinwall inletsTo view Turtleand#039;s installation guide for inspection chambers,andnbsp;click here.

GBP 658.45
1