67 resultater (0,29229 sekunder)

Vis alle filtre

Mærke

Vis alle

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

SURESIGN FINECARE Point Of Care Analyser

SURESIGN FINECARE Point Of Care Analyser

Easy to use All tests run on the Finecare analyser use simple fingerstick blood or a small aliquot of venous blood. All tests use a simple & recognisable cassette design improving familiarity and therefore ease of use. In a recent General Practice study of the analyser in 94% of cases clinicians found the analyser to be fairly or very convenient to use. All test kits have a long shelf life & are stored at room temperature. No calibration required The Finecare analyser does not need any calibration, all calibration data for any individual test type is included in a code chip supplied with each new test kit. This enables easy & rapid use of the analyser and gives the analyser the ability to run new tests without the need for software updates. Large test menu Currently there are 30 different Finecare tests available, all of which run on the Finecare analyser. New tests are being launched on a regular basis. Laboratory standard results In external evaluations the Finecare analyser has been shown to provide laboratory standard results ensuring users of the product at the point of care can confidently rely on results obtained from the Finecare tests. All tests include an on-board control ensuring the efficacy of the test. The 10,000 test memory, on board printer & interface ability remove the risk of administrative errors. Virtually maintenance free Simply keep it clean. All sample & any fluids are kept within the test cassette & therefore there is no requirement for fluidic pumps etc enabling the analyser to be virtually maintenance free.

GBP 2350.19
1

CardioChek PA Meter

CardioChek PA Meter

The CardioChek PA Meter has a rapid, accurate and easy-to-use analyser that provides on-the-spot testing for a range of factors. The single portable device offers six different parameters and ten different combinations and can be connected to a PC running CardioChek Link software to ensure data is transcribed accurately and efficiently to a patient management system. Tests are available in a choice of combined or single tests. Combined tests reduce procedure time, patient discomfort and allow the practitioner to make a rapid, informed choice about treatment. Features Portable, hand-held device Fully automated Simple testing process (simply pipette a single sample onto a strip) Fast Results in one to two minutes No expensive lab analysis or follow-up consultation delay Suitable for multiple clinical applications Allows testing at point-of-care, no fasting, no refrigeration CE marked/FDA approved Memory for up to 200 date and time stamped results Requires 2 x AAA batteries Lipid Panel Total Cholesterol HDL Cholesterol Triglycerides LDL Cholesterol (calculated) Metabolic Chemistry Panel HDL Cholesterol Triglycerides Glucose General Screening Panel Total Cholesterol HDL Cholesterol CVD Panel Total Cholesterol HDL Cholesterol Glucose Specifications Dimensions: 76 x 140 x 25mm (W x L x H) Weight: 122g (without batteries)

GBP 811.83
1

iPAD Saver : NF1200 Semi-Automatic

iPAD Saver : NF1200 Semi-Automatic

Product Properties The iPAD Saver : NF1200 Semi-Automatic defibrillator is designed to be used by anyone, with or without first aid knowledge. The clear visual and simple, verbal instructions guide the user and the device automatically analyses if-and-when a person needs defibrillation. If this is required, the user is prompted to press the shock button. Robust unit with 5 year warranty iP54 rated for high protection against dust and water ingress Easy to use, with clear voice prompts and visual instructions LED status indicator and daily self-tests i-button provides handover information to Emergency Services Lithium manganese battery with 4 year warranty, typically 5 year life Daily self-tests Paediatric Electrode Pads also available Key Features Width; 81mm Length: 220mm Height: 281mm 2.4kg, including battery and electrode pads

GBP 705.00
1

ELI150c-ACB-AACBX ELI150c with wired patient cable & ethernet cable option to send ECG tests to a PC

ELI150c-ACB-AACBX ELI150c with wired patient cable & ethernet cable option to send ECG tests to a PC

ELI150c with wired patient cable & ethernet cable option The ELI 150c 12-lead Electrocardiograph is powered by Mortara and provides comprehensive functionality and connectivity in a compact, portable device. It includes a high-resolution colour display offering real-time preview of 12-lead ECG. It also communications with third-party EMR systems. All the Eli 150 ECG units listed below come with the following: 200 ECG patient memory Replaceable lead wires & lead off indicator IEC banana clips, clip adaptors (10) 100x tab electrodes ECG Paper 2 Year warranty Dimensions: 29.2 x 30.5 x 10.2cm Weight: 3.3kg

GBP 1930.00
1

CareFusion Spirometry PC Software (SPCS)

CareFusion Spirometry PC Software (SPCS)

CareFusion Spirometry PC Software (SPCS) Designed to meet the needs of busy clinicians and healthcare professionals, CareFusion's Spirometry PC Software can be used to interface a spirometer and PC to provide an exceptionally powerful patient management system. The Windows compatable software features a multi-window display that allows patients to be tested with the minimal number of steps. The powerful search facility enables speific patient groups to be defined and analysed, producing demographically based information easily and quickly. When connected to one of Micro Medical's compatable spirometers, patients can be tested in real-time or existing data can be uploaded allowing tests to be conducted away from a computer. Once uploaded, records can be transferred into other patient journals or medical administration systems such as EMIS or SystmOne. Data can be exported in a range of formats including PDF, CSV, Excel or Word. Among the many benefits provided by the SPCS package are quality grading of blow performance, lung age calculations and textual interpretation based on ATS, NICE or Entright recommendations and pre- and post-bronchodilator comparisons. Up to 50 spirometry indices can be measured (both inspiratory and expiratory) and predicted values, % predicted and Z scores can be displayed. The software additionally features a choice of four animated incentive screens designed to elicit high quality spirometry tests across a range of patient types. Features Fullt ATS/ERS 2005 compliant Up to 50 spirometry indices supported Highly configurable with a powerful search facility Real-time display of tests and results Quality grading of blow performance Lung-age calculations with textual interpretation Pre- and post-bronchodilator comparisons Wide range of export formats Animated incentive screens Comprehensive on-screen help

GBP 538.28
1

Defibtech Lifeline Semi Automatic AED Standard Battery

Defibtech Lifeline Semi Automatic AED Standard Battery

Product Properties Designed by physicians to be simple for anybody to use! This AED is supplied with the standard Lifeline Defibrillator Battery that will last approximately 5 years and is capable of delivering 125 shocks or 8 hours of continuous operation. The Lifeline Semi-Automatic AED has a rugged and highly visible design making it a perfect choice. Simple to use for both untrained and trained users this AED is uncomplicated and fuss free! Features and benefits: Tough and robust design tested to millitary standards! IP rating 54: splash proof and dust protected with battery pack installed. Voice prompts: Clear voice instructions are given to the user once the unit is switched on via the green on/off button guiding the user through the operation of the AED Self tests: This AED performs automatic daily, weekly and monthly self tests ensuring all circuitry is functioning correctly making sure it is always ready for rescue. The Lifeline AED checks for pad presence daily. Unit and battery pack system tests can be initiated by the user. Status indicator: The unit has a green status light so you can see at a glance that the unit has passed it’ self test and is rescue ready. If the unit shows a red light then there is an error and the unit requires attention. Pre-connected electrodes: Adult defibrillation pads are pre-connected to the AED saving vital time in a rescue situation. Cable length is approximatley 122cm. Waveform: Biphasic Truncated Expontential (Impedance compensated) Energy: 150 Joules fixed / charge time typically less than 9 seconds with standard battery pack Lightweight design making it easy to carry via the integrated handle Bright yellow design with black rubber protective edging Comes complete with: 1 x Defibtech Lifeline AED (Semi-Automatic) 1 x Standard 5 year battery 1x Adult Electrode Pads 1 x User Manual

GBP 999.00
1

Amplivox - TIT001 Titmus Vision Screener V4 w/CC

Amplivox - TIT001 Titmus Vision Screener V4 w/CC

Product Properties A portable vision tester that can measure visual acuity (near, far and intermediate), depth perception, colour vision, phoria and peripheral vision. Compact and portable Ergonomic Head sensor for accurate head positioning Remote control panel True colour testing Comprehensive range of test parameters Night vision tests No calibration required Ideal for industrial and DSE screening needs Designed for accurate and reliable vision screening, the V4 portable vision tester provides a comprehensive range of tests and features that can minimise consultation times, improve workflows and improve record keeping. Key Features Visual acuity (near, far and optional intermediate), depth perception, colour perception, phoria, and peripheral tests can all be completed in a very efficient and accurate manner The Titmus V4 can also provide night vision testing should your screening programme require this type of testing Accuracy. A standardised light source provides true colour testing environment, an adjustable viewing function and a soft easy to clean head sensor provide a controlled and accurate test environment for serial acuity measurements Maintenance free and with no calibration required, the Titmus V4 provides a very cost effective solution for occupational vision screening requirements Remote control panel. For ease of use, the Titmus V4 is supplied with a remote control panel which identifies all the test parameter controls and positions to ensure reduced test times Dimensions: Width x length x height: 28 x 43 x 19 cm units (closed condition) Weight: 6 kg Temperature: +50°F to +104°F (+10°C to +40°C) Humidity: 30% to 75% (non-condensing) Pressure: 80-106 kPa Standards:Meets the following CE, UL, and CSA Standards. Europe: EN 60601-1, IEC 60601-1, 3rd ed Class I, Annex IX of MDD 93/42/EEC, Class I Device Standard Accessories: 8 test slides made from high grade photographic film sealed between optical-quality glass Training manual Record forms – pad of 100 forms to record test results 10 lens cleaning wipes Package of 3 fog eliminator cloths Accessory case for storing lens cleaning wipes, fog eliminator cloths, and lenses Dust cover for instrument storage

GBP 4345.00
1

Defibtech Lifeline Semi Automatic AED High Capacity Battery

Defibtech Lifeline Semi Automatic AED High Capacity Battery

Product Properties Designed by physicians to be simple for anybody to use! This AED is supplied with the High Capacity Lifeline Defibrillator Battery that will last approximately 7 years and is capable of delivering 300 shocks or 16 hours of continuous operation. The Lifeline Semi-Automatic AED has a rugged and highly visible design making it a perfect choice. Simple to use for both untrained and trained users this AED is uncomplicated and fuss free! Features and benefits: Tough and robust design tested to millitary standards! IP rating 54: splash proof and dust protected with battery pack installed. Voice prompts: Clear voice instructions are given to the user once the unit is switched on via the green on/off button guiding the user through the operation of the AED Self tests: This AED performs automatic daily, weekly and monthly self tests ensuring all circuitry is functioning correctly making sure it is always ready for rescue. The Lifeline AED checks for pad presence daily. Unit and battery pack system tests can be initiated by the user. Status indicator: The unit has a green status light so you can see at a glance that the unit has passed it’ self test and is rescue ready. If the unit shows a red light then there is an error and the unit requires attention. Pre-connected electrodes: Adult defibrillation pads are pre-connected to the AED saving vital time in a rescue situation. Cable length is approximatley 122cm. Waveform: Biphasic Truncated Expontential (Impedance compensated) Energy: 150 Joules fixed / charge time typically less than 6 seconds with the high capacity battery pack Lightweight design making it easy to carry via the integrated handle Bright yellow design with black rubber protective edging Comes complete with: 1 x Defibtech Lifeline AED (Semi-Automatic) 1 x High capacity 7 year battery 1 x Adult Electrode Pads 1 x User Manual

GBP 1299.99
1

Dräger AlcoTest 7000

Dräger AlcoTest 7000

Product Properties The Dräger AlcoTest 7000 professional alcohol testing device is fast, compact and delivers precise test results in all weather conditions. EU Police Approval (EN15964)NHTSA Evidential ApprovalUS Coast Guard ​The Dräger Alcotest® 7000 sets new standards in alcohol test devices. Its benefits include a wider temperature- and measuring range, low maintenance requirements and various networking options. In addition, the device can perform alcohol tests via both a mouthpiece and a funnel. Reliable alcohol tests have never been so fast, simple and efficient. The Dräger Alcotest 7000 is also available as a system kit with bluetooth printer. Key Features Calibration – only one calibration required per year Two measurement methods in one device Wide temperature range Network-connected solutions – Draeger Add and Service Connect High alcohol-detection limits Only one calibration per year ​Typically alcohol testing devices have to be calibrated every six months. Thanks to its exceptional measurement stability, the Dräger Alcotest® 7000 only needs calibrating every 12 months. As a result, you only have to collect, send off and then re-issue your alcohol testers once a year. This saves time and, above all, money. Two measurement methods in one device ​Alongside the classic test using a mouthpiece, with the Alcotest 7000 you can also carry out tests using a funnel attachment. This enables you to complete a large number of alcohol tests in a very short span of time: time-saving, cost-effective and hygienic. The funnel-based test gives you an initial indication as to whether or not alcohol is present in the subject’s breath. If the answer is yes, you simply press a button to switch over to the mouthpiece-based test mode. The following test then shows you the actual level of alcohol in the subject’s breath. Wide temperature range ​With the Alcotest 7000 you can take reliable measurements even in extreme temperatures. The alcohol tester’s patented heating system and high-quality materials ensure dependable results in temperatures ranging from -10 °C to +55 °C. Network-connected solutions ​The built-in Bluetooth® Low Energy technology offers you energy-saving, digital connectivity for the device and its data. This has many advantages: For example, the wireless connection of the alcohol tester to the Dräger BT Mobile Printer enables you to print out test results from a distance of up to 15 meters. In addition, the software solution “Dräger add” facilitates a range of processes – e.g. the documentation of the measuring data on site. Dräger’s Service Connect software enables you to download measurement data and much more. You can also connect the Alcotest 7000 directly to a computer with a USB-C cable to read out just the test results. High alcohol-detection limits ​The increased performance capacity of the Alcotest 7000 also includes its measurement range. The maximum blood-alcohol limit that can be set with this alcohol testing device is as high as 3 mg/l. If this measurement range limit is exceeded, the display will tell you. Images for illustration purposes only, actual product may differ.

GBP 1182.00
1

Dräger Alcotest 7000 System Kit with printer and mouthpieces

Dräger Alcotest 7000 System Kit with printer and mouthpieces

The Dräger AlcoTest 7000 System kit includes handset, printer, mouthpieces and funnels – everything you require to be able to produce on the spot proof of test result. ✔ UK Home Office Approval in process ✔EU Police Approval (EN15964) ✔ NHTSA Evidential Approval This Dräger Alcotest 7000 system kit includes handset, bluetooth printer, 100 x standard mouthpieces and 10 x funnels. Key features Calibration – only one calibration required per year Two measurement methods in one device Wide temperature range Network-connected solutions – Draeger Add and Service Connect High alcohol-detection limits Only one calibration per year ​Typically alcohol testing devices have to be calibrated every six months. Thanks to its exceptional measurement stability, the Dräger Alcotest® 7000 only needs calibrating every 12 months. As a result, you only have to collect, send off and then re-issue your alcohol testers once a year. This saves time and, above all, money. Two measurement methods in one device ​Alongside the classic test using a mouthpiece, with the Alcotest 7000 you can also carry out tests using a funnel attachment. This enables you to complete a large number of alcohol tests in a very short span of time: time-saving, cost-effective and hygienic. The funnel-based test gives you an initial indication as to whether or not alcohol is present in the subject’s breath. If the answer is yes, you simply press a button to switch over to the mouthpiece-based test mode. The following test then shows you the actual level of alcohol in the subject’s breath. Wide temperature range ​With the Alcotest 7000 you can take reliable measurements even in extreme temperatures. The alcohol tester’s patented heating system and high-quality materials ensure dependable results in temperatures ranging from -10 °C to +55 °C. Network-connected solutions ​The built-in Bluetooth® Low Energy technology offers you energy-saving, digital connectivity for the device and its data. This has many advantages: For example, the wireless connection of the alcohol tester to the Dräger BT Mobile Printer enables you to print out test results from a distance of up to 15 meters. In addition, the software solution “Dräger add” facilitates a range of processes – e.g. the documentation of the measuring data on site. Dräger’s Service Connect software enables you to download measurement data and much more. You can also connect the Alcotest 7000 directly to a computer with a USB-C cable to read out just the test results. High alcohol-detection limits ​The increased performance capacity of the Alcotest 7000 also includes its measurement range. The maximum blood-alcohol limit that can be set with this alcohol testing device is as high as 3 mg/l. If this measurement range limit is exceeded, the display will tell you. TECHNICAL SPECIFICATIONS Measuring range: up to 3 mg/L Operating temperature: -10°C – 55°C Display: QVGA TFT colour display Connection port: USB-C Type of battery: Build in Lithium battery or 3xAA-LR6 / 3x NiMH Number of tests from full battery: 5000 breath test (lithium version) or 1500 breath tests (alkaline version) Protection class: IP54 Calibration interval: 12 months Start up time: 3 seconds Analyse time after test sample: 3 to 25 seconds Recovery time to be ready for next test: 20 to 120 seconds

GBP 1850.00
1

Amplivox - 260 Portable diagnostic audiometer Audiocups

Amplivox - 260 Portable diagnostic audiometer Audiocups

Product Properties A cost-effective, portable and dependable diagnostic audiometer including air conduction (AC), bone conduction (BC), masking functionality, and speech testing. With its compact nature, the Model 260 is an ideal tool for audiologists and mobile hearing care professionals. Supportive design With no configuration or set-up required, and an intuitive design, the Model 260 requires minimal training. It also has a dedicated key layout, enabling immediate and effortless hearing loss diagnosis. Test options This portable audiometer features everything you’d expect for both screening and diagnostic audiometry. With manual air and bone conduction testing, alongside helpful assistance tools, operators can determine hearing loss issues quickly and efficiently. With recorded and live speech testing functionality in addition to free field output, clinical tests such as Stenger and ABLB, the Model 260 provides a comprehensive solution ensuring leading patient care can be provided. Portability This instrument is lightweight and comes with a custom protective case. For complete portability it can be used for either desktop or mobile use. Data management With the benefit of an internal memory function, test results can be printed immediately or saved for future processing using the supplied Amplisuite software. The audiometer also offers single-click integration to third-party Electronic Medical Record (EMR) systems such as Noah and OtoAccess®. This enables the seamless transfer of results and data, for exceptional workflow efficiency. Key features Air and bone conduction, ULL/UCL Speech testing (live and recorded) Free field audiometry (2 speaker function) Tone selection: pure, pulsed, warble, continuous Masking: narrowband (tone) or speech-weighted Special tests: ABLB, Stenger Integrated talk forward/back function Third-party EMR connectivity Intuitive and ergonomic design Compact, lightweight and portable

GBP 3135.00
1

Amplivox - 260 Portable diagnostic audiometer Not required

Amplivox - 260 Portable diagnostic audiometer Not required

Product Properties A cost-effective, portable and dependable diagnostic audiometer including air conduction (AC), bone conduction (BC), masking functionality, and speech testing. With its compact nature, the Model 260 is an ideal tool for audiologists and mobile hearing care professionals. Supportive design With no configuration or set-up required, and an intuitive design, the Model 260 requires minimal training. It also has a dedicated key layout, enabling immediate and effortless hearing loss diagnosis. Test options This portable audiometer features everything you’d expect for both screening and diagnostic audiometry. With manual air and bone conduction testing, alongside helpful assistance tools, operators can determine hearing loss issues quickly and efficiently. With recorded and live speech testing functionality in addition to free field output, clinical tests such as Stenger and ABLB, the Model 260 provides a comprehensive solution ensuring leading patient care can be provided. Portability This instrument is lightweight and comes with a custom protective case. For complete portability it can be used for either desktop or mobile use. Data management With the benefit of an internal memory function, test results can be printed immediately or saved for future processing using the supplied Amplisuite software. The audiometer also offers single-click integration to third-party Electronic Medical Record (EMR) systems such as Noah and OtoAccess®. This enables the seamless transfer of results and data, for exceptional workflow efficiency. Key features Air and bone conduction, ULL/UCL Speech testing (live and recorded) Free field audiometry (2 speaker function) Tone selection: pure, pulsed, warble, continuous Masking: narrowband (tone) or speech-weighted Special tests: ABLB, Stenger Integrated talk forward/back function Third-party EMR connectivity Intuitive and ergonomic design Compact, lightweight and portable

GBP 2985.00
1

Pre-Owned, Philips Heartstart FR3 Defibrillator - Semi Automatic

Pre-Owned, Philips Heartstart FR3 Defibrillator - Semi Automatic

All of our pre-owned units come fully serviced and tested with a 1 year warranty, calibration certificate and brand new batteries and pads The semi-automatic Philips HeartStart FR3 defibrillator has been designed for quick response in the event of an emergency. Suitable for use by professional medical responders and paramedics, the HeartStart FR3 defibrillator is available with either a standard text display showing incident data, prompts and graphics, or can be purchased with ECG display so that critical patient information is readily available to the rescuer. The intelligent HeartStart FR3 analyses the patient's heart rhythm and advises whether to administer a shock or first perform CPR before delivering a shock. Product Features: Semi Automatic unit - administers a shock at the press of a button Supplied with one set of SMART PADS III and battery 2 year electrode pad life (from date of manufacture) Daily, weekly and monthly self tests performed by the unit Designed for use by professional medical responders and paramedics Automatically switches on when the rigid case is opened (x1 Reconditioned case sold with unit) Features pre-connected Smart PAD III that can be stored out of the foil pouch Provides voice and text prompts to provide a step-by-step procedure Advises if a shock is to be administered or to perform CPR followed by a shock CPR monitoring technology provides guidance on how to improve the quality of treatment Available with standard text display or with ECG display to show basic heart rhythm Features a high resolution, clear LCD screen Carries out an automatic test when the battery is fitted: ensures the device and connected accessories are ready Delivers a shock in 8 seconds Stores summary data of the defibrillator's last use The Philips HeartStart FR3 SMART pads III electrode pads are suitable for use on adults and children. Supplied with Child / infant key Allowing the electrodes to be checked during the HeartStart FR3 defibrillator's routine self-tests, the SMART pads III can be pre-connected, also helping to save critical time during a medical emergency. The pads are supplied as a pair and have 2 year lifespan. Suitable for use in conjunction with the Philips Hearstart FR3 defibrillator Supplied as a pair ready for use 2 year Electrode lifespan Can be used on both adults and children (when using the Infant/Child Key) Pads can be pre-connected to help save time in an emergency When connected the pads are checked under the defibrillator's routine self-tests Offset tab design: enables a quick peel and fast placement on the patient's chest

GBP 649.00
1

MIR - Spirodoc - Spirometer with Oximetry, with reusable turbine

MIR - Spirodoc - Spirometer with Oximetry, with reusable turbine

Product PropertiesTouchscreen handheld Spirometer. Spiro + Oxi version.Advanced, screening and patient user modes. Monitor progress of respiratoryrehabilitation.The Spirodoc® Spiro is a handheld, portable diagnostic spirometer withtouchscreen display. The device can be configured to operate with advancedparameters for full spirometry, reduced parameters set for simple screeningand a simple mode for patient home use. The spirometer with oximetry offers complete respiratory diagnostic and rehabilitation monitoring. The flowmeter can be detached from the main unit allowing for ambulatory walk testing, sleep oximetry testing and continuous monitoring of everyday physical activity. For more information about oximetry, please refer to Spirodoc® Oxi data sheet.The device features a high resolution touch screen display. Powered by itslong life rechargeable battery, the Spirodoc® is capable of storing up to 10,000tests on its built in memory. When patients are sent away with a Spirodoc®,the device can be set to patient mode which features an “eDiary”. This allowspatients to answer pre-configured questions about their symptoms thatcorrelates with any tests recorded for that day.It can also connect wirelessly to a PC via Bluetooth® (or directly via USB)allowing for real-time spirometry testing, and downloading of test resultsstored on the device using the free MIR WinspiroPRO® PC Software. TheSpirodoc® Spiro measures an array of selectable parameters and gives a PREand POST bronchodilator comparison. Results are previewed on the displayfollowing a test, with a flow/volume graph in addition to the patient’s actualspirometry readings for immediate assessment together with interpretation. Key Features Carry everywhere - handheld spirometer with high-resolution LCD touchscreen display, navigate easily through the icon-based menus on a clear, with real time curve and test results Three functional modes - choose between full spirometry mode, basic screening mode or patient mode for home testing Patient’s home-care symptoms eDiary - with patient mode enabled, users can monitor themselves and record their symptoms Large memory storage - store up to 10,000 tests Bluetooth® and USB connectivity to PC - download results stored on the device and conduct real-time spirometry using WinspiroPRO® PC software Real-time Test - Spirometry: FVC, VC, IVC, MVV, PRE/POST Bronchodilator comparison 3D Oximetry (optional): Spot test (SpO2, Pulse), 6MWT, Sleep Test, 24h SpO2 Holter Test. Long lasting Lithium ION battery, rechargeable via USB. Internal Storage up to 10.000 Spirometry tests or 300 hrs oximetry. Dimensions: 5.7×1.9×0.7”; (101x48x16 mm) Weight: 4.1 oz; (116 gr) Real-Time Test on PC screen, EHR/EMR integration, internal memory back-up and more Compliance with ATS/ERS 2019 - And other Standards including ISO 26782 (for Spirometry), ISO 23747 (for PEF), ISO 80601-2-61 (for Oximetry), and more

GBP 1795.00
1

Amplivox - OTO-1 Otosure PC-based automatic screening audiometer Not required

Amplivox - OTO-1 Otosure PC-based automatic screening audiometer Not required

Product Properties For fast, accurate hearing tests, the Otosure is a PC-based automatic screening audiometer designed to provide occupational health professionals with significant workflow improvements through time and cost savings. Customised test optionsAutomatic and manual test modes enable all patient hearing thresholds to be established and categorised. The Otosure also has configurable options so the test can be customised to the users’ specific requirements, ensuring accurate and efficient testing. Data managementOffering seamless PC connectivity, the Otosure includes our Audibase data management software, allowing all test results to be stored and available for future review. Extensive data and trend analysis provides business intelligence to support the delivery of a successful hearing conservation programme and identify at risk personnel. As well as this, the instrument offers custom built educational tools with a predictive hearing level and hearing loss indicator, providing a clear explanation to test subjects, and enabling a greater level of assessment. All tests can be automatically categorised in accordance with HSE standards.The Otosure is configured for use with the Audibase data management software and single-click test initiation. The audiometer can also be interfaced to a number of leading OH Electronic Medical Record (EMR) systems to provide a paperless and seamless health screening programme that maximises workflow efficiencies. PortabilityPocket-sized and weighing only 165g (0.36lbs), the Otosure is completely portable and comes supplied with a custom carry case, making it an ideal choice for multi-site audiometry testing. Key Features Automatic and manual test modes Automatic HSE categorisation Unique educational and assessment tools Extensive data analysis and trending Third-party EMR connectivity Compact, lightweight and portable Includes: Standard audiometric headset Patient response switch Carry case USB stick (manuals and Audibase software) USB cable (PC connection)

GBP 1840.00
1

Amplivox - 170 - Manual and automatic screening audiometer Not required

Amplivox - 170 - Manual and automatic screening audiometer Not required

Product PropertiesCost-effective and easy-to-use, the Model 170 is the preferred tool of choice for hearing care professionals who complete hearing tests within schools, primary care, GP surgeries and industry. Ergonomic design Designed with the operator in mind, the Model 170 has a clear display panel and dedicated soft key layout, allowing complete focus on the test subject and reducing the time it takes to do examinations.Time saving The audiometer includes test frequencies and attenuation ranges required to perform a wide range of pure tone audiometry, such as standard threshold or sweep testing for school screening. Automatic test routines with pure and pulsed test tones enable large-scale screening programmes to be delivered effectively.Portability At only 710g (1.52lbs), the lightweight and robust design of the Model 170 benefits any hearing care professional who frequently travels. This instrument is supplied with a custom carry case and all standard accessories.Data managementResults can be manually recorded, printed with the optional portable printer, saved in internal memory and or transferred to a PC application, thus giving a comprehensive range of data management choices.The audiometer also offers integration to a number of third-party Electronic Medical Record (EMR) systems. This enables the seamless transfer of results and data, for improved workflow efficiency. For specific occupational health screening programmes, the Model 170 can also be supplied with the Amplivox Audibase data management software which will automatically categorise hearing tests. Key FeaturesManual and automatic screeningCompact, lightweight and portableExtended frequency range: 125 – 8000HzAttenuation range: -10 – 100 dBHLUser defined test routinesAutomatic threshold savingPC Software includedIntuitive and ergonomic design Included Standard audiometric headset Patient response switch Audiogram cards (50) Power supply with country adaptors Carry case USB stick (manuals and Amplisuite software)

GBP 2175.00
1

Amplivox - OTO-1 Otosure PC-based automatic screening audiometer Audiocups

Amplivox - OTO-1 Otosure PC-based automatic screening audiometer Audiocups

Product Properties For fast, accurate hearing tests, the Otosure is a PC-based automatic screening audiometer designed to provide occupational health professionals with significant workflow improvements through time and cost savings. Customised test optionsAutomatic and manual test modes enable all patient hearing thresholds to be established and categorised. The Otosure also has configurable options so the test can be customised to the users’ specific requirements, ensuring accurate and efficient testing. Data managementOffering seamless PC connectivity, the Otosure includes our Audibase data management software, allowing all test results to be stored and available for future review. Extensive data and trend analysis provides business intelligence to support the delivery of a successful hearing conservation programme and identify at risk personnel. As well as this, the instrument offers custom built educational tools with a predictive hearing level and hearing loss indicator, providing a clear explanation to test subjects, and enabling a greater level of assessment. All tests can be automatically categorised in accordance with HSE standards.The Otosure is configured for use with the Audibase data management software and single-click test initiation. The audiometer can also be interfaced to a number of leading OH Electronic Medical Record (EMR) systems to provide a paperless and seamless health screening programme that maximises workflow efficiencies. PortabilityPocket-sized and weighing only 165g (0.36lbs), the Otosure is completely portable and comes supplied with a custom carry case, making it an ideal choice for multi-site audiometry testing. Key Features Automatic and manual test modes Automatic HSE categorisation Unique educational and assessment tools Extensive data analysis and trending Third-party EMR connectivity Compact, lightweight and portable Includes: Standard audiometric headset Patient response switch Carry case USB stick (manuals and Audibase software) USB cable (PC connection)

GBP 1990.00
1

Amplivox - 170 - Manual and automatic screening audiometer Audiocups

Amplivox - 170 - Manual and automatic screening audiometer Audiocups

Product PropertiesCost-effective and easy-to-use, the Model 170 is the preferred tool of choice for hearing care professionals who complete hearing tests within schools, primary care, GP surgeries and industry. Ergonomic design Designed with the operator in mind, the Model 170 has a clear display panel and dedicated soft key layout, allowing complete focus on the test subject and reducing the time it takes to do examinations.Time saving The audiometer includes test frequencies and attenuation ranges required to perform a wide range of pure tone audiometry, such as standard threshold or sweep testing for school screening. Automatic test routines with pure and pulsed test tones enable large-scale screening programmes to be delivered effectively.Portability At only 710g (1.52lbs), the lightweight and robust design of the Model 170 benefits any hearing care professional who frequently travels. This instrument is supplied with a custom carry case and all standard accessories.Data managementResults can be manually recorded, printed with the optional portable printer, saved in internal memory and or transferred to a PC application, thus giving a comprehensive range of data management choices.The audiometer also offers integration to a number of third-party Electronic Medical Record (EMR) systems. This enables the seamless transfer of results and data, for improved workflow efficiency. For specific occupational health screening programmes, the Model 170 can also be supplied with the Amplivox Audibase data management software which will automatically categorise hearing tests. Key FeaturesManual and automatic screeningCompact, lightweight and portableExtended frequency range: 125 – 8000HzAttenuation range: -10 – 100 dBHLUser defined test routinesAutomatic threshold savingPC Software includedIntuitive and ergonomic design Included Standard audiometric headset Patient response switch Audiogram cards (50) Power supply with country adaptors Carry case USB stick (manuals and Amplisuite software)

GBP 2325.00
1