ProfitSpring | B2B PPC Agency

KREG Skruer XL Pocket-Hole 100mm 75 stk

- Kreg XL Pocket-Hole Screws 4", 75-ct.Build big and build strong with XL Pocket-Hole Screws and the Kreg Pocket-Hole Jig XL. These extra-large screws are perfect for building outdoor projects with 89 mm and larger boards, featuring a corrosion-resistant coating.

DKK 300.00

1

MILESCRAFT Boreskabelon JointMaster

- A compact and versatile doweling jig that allows woodworkers to create any dowel joint quickly and accurately. It has two retractable edge stops to quickly line up boards. The self clamping design allows for easy setup.The JointMaster™ comes with three drill blocks and is capable of creating joints using the most common dowel pin sizes- 1/4″, 5/16” and 3/8”. Each hardened steel drill block is adjustable to accept and align centered dowel holes on boards from 1/2” up to 3”. Built-in scales help to align and center your dowels. The convenient centering marks make sure your holes are where you want them. If you’re using standard 1/2”, 5/8”, 3/4, or 1-1/2” boards, three included Spacer Blocks will automatically align the drill blocks and help you select the appropriate dowel size.To help eliminate alignment issues, the JointMaster™ has built-in edge stops. Simply lower, tighten, and rest your boards against them to ensure both boards have their dowel holes in the same position for a solid joint. When creating surface joints, the three dowel alignment slots help you transfer the edge dowel position to the face of your board with ease.The self-clamping design of the JointMaster™ means no additional clamps are needed to complete your project. The clamp can be moved from the main body to the clamping wall to create different joints. If required, the clamp body can be removed entirely based on your project needs and your own clamping solution can be used.When you require professional quality joint work, make sure the Milescraft JointMaster™ is part of your tool arsenal.JointMaster Doweling JigA sturdy all-metal body is configurable for edge, corner, and surface jointsDurable all-aluminum construction won’t flex or bendSelf-clamping jig securely holds the workpiece in placeInterchangeable Bushing BlocksHardened steel bushings provide long-lasting, accurate dowel hole drillingDrill guide bushing block sizes: 3/8″, 1/4″, 5/16″Dual Position Clamping Block with SpindleAllow for horizontal or vertical positioning and can be adjusted to either wall to complete multiple jointsEdge Stops and Spacer BlocksRetractable edge stops automatically align boards to position dowel pins in the same location.Included spacer blocks align the drill guides with the center of your boardBuilt-in center finder and pencil includedNon-Slip PadPrevents slipping and marring of the workpieceWe offer both imperial and metric versions of this product. If you wish to order the metric, please tell us in the notes of your order.

DKK 351.25

1

KREG Crosscut Station

- Product information "Kreg Crosscut Station"The Crosscut Station delivers the capabilities of a miter saw with just a circular saw. Crosscut boards wider than most compound miter saws can handle (up to 300mm at 90°). Make a variety of angle and miter cuts from 0° to 45° with the Adjustable Fence. An MDF base and SureCut™ backboard act as a sacrificial surface for splinter-free cutting results. The MDF base also functions as a kerf line to clearly show the blade’s path. Use material support wings and the detachable blocks to cut long boards safely by supporting offcuts. They pull out easily when more support is needed, and tuck back in when not in use. The Crosscut Station is quick to set up and easy to store away. Its compact design even makes it portable for accurate crosscuts and angle cuts on the go.

DKK 675.00

1

KREG Boreskabelon til terrasse Deck Jig

- Create a better, more-beautiful deck with the Kreg® Deck Jig. This concealed-fastening system works together with Kreg Deck Screws to allow you to install decking without visible fasteners, so all you see is the beauty of your decking instead of a bunch of screws. The Deck Jig features hardened-steel guides to drill precisely positioned pilot holes, and to guide Deck Screws to attach decking from the edge solidly and invisibly - whether you are using solid-wood or composite deck boards. The Deck Jig makes drilling the stepped pilot holes and driving screws easy in all situations thanks to three hardened-steel guides - one at 90° to the board edge, and two at opposing 45° angles - that allow easy access when working near walls, as well as when creating strong joints where boards butt together end to end. The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw, while a stop collar ensures prefect drilling depth. After drilling, just drop a Kreg Deck Screw - an integral part of this concealed-fastening system - into the same guide, and then drive it with the included square-drive driver bit.

DKK 563.00

1

MILESCRAFT Kantguide til overfræser Edge&MortiseGuide (metric)

- The Edge&MortiseGuide™ is perfect for mortises, rabbets, dados, edge finishing and more! The Edge Guide has a large surface area for straight and curved edges for radial cuts. The Offset Base is ideal for narrow boards, routing edges, and edge profiles. Included are two non-marring mortising pins for cutting mortises in varying board thicknesses.Edge GuideCan be used for many projects that require dado cuts, grooves, and rabbetsCompatible with plunge and fixed base routersLarge surface area for straight and curved edges for radial cutsStraight edge has a maximum travel of approximately 14cmMortise GuideIncludes two non-marring mortising pins for cutting mortises into varying board thicknessesTurnLock™ BasePlateClear BasePlate for visibility of work areaMade from tough polycarbonate3 mortise locations for different board thicknessesCentering pin included for fast accurate BasePlate installationIncludes common mounting screws for attachment to most routersOffset BaseBuilt-in storage for mortise pinsIdeal for narrow boards, routing edges, and edge profilesClear 13″ offset base provides added stability during edge routingOversized handle is easy to grip providing superior control of your routerThumb-activated lock/release mechanism enhances speed and safety when changing tools

DKK 292.50

1

KREG Boreskabelon til terrasse Deck Jig KIT inkl skruer

- Create a better, more-beautiful deck with the Kreg® Deck Jig. This concealed-fastening system works together with Kreg Deck Screws to allow you to install decking without visible fasteners, so all you see is the beauty of your decking instead of a bunch of screws. The Deck Jig features hardened-steel guides to drill precisely positioned pilot holes, and to guide Deck Screws to attach decking from the edge solidly and invisibly - whether you are using solid-wood or composite deck boards. The Deck Jig makes drilling the stepped pilot holes and driving screws easy in all situations thanks to three hardened-steel guides - one at 90° to the board edge, and two at opposing 45° angles - that allow easy access when working near walls, as well as when creating strong joints where boards butt together end to end. The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw, while a stop collar ensures prefect drilling depth. After drilling, just drop a Kreg Deck Screw - an integral part of this concealed-fastening system - into the same guide, and then drive it with the included square-drive driver bit.

DKK 799.00

1

MILESCRAFT Slibeklods EdgeSander ø125mm

- The Milescraft EdgeSander™ is designed to sand down two rough edges at a time. Why make two passes when you can make one? This product is great for quickly finishing off veneer or laminate projects, but is versatile enough for any edge sanding project.EdgeSander Features:Unique V-Groove surface sands down both edges of boards from ¼” up to 1 ½” simultaneouslyErgonomic shape makes the EdgeSander™ comfortable to hold and apply consistent, accurate pressureCompatible with any standard 5″ sanding disc with Hook and Loop backing

DKK 70.00

1

KREG Portable Crosscut

- The Portable Crosscut allows you to quickly and precisely crosscut boards up to 200 mm wide and make accurate cuts at a 45° or 90° angle using just a circular saw. See exactly where the saw will cut every time thanks to the retractable cutline indicators. Simply align them to a pencil mark and cut with confidence. The saw support ledge starts off every cut with stability and precision, while GripMaxx holds the guide steady throughout the entire cut. High-quality cuts using only a guide and a circular saw.

DKK 206.00

1

KREG Stainless Steel Deck skruer 51mm

- Create a better, more beautiful deck with Kreg® Deck Screws and a Deck Jig. Designed to work with the Kreg® Deck Jig, these superior-quality screws feature a self-tapping tip and aggressive threads for fast, easy driving, plus a smooth upper shank to help pull deck boards tightly against the joist. Made from solid stainless steel for ultimate corrosion resistance, these Deck Screws are case-hardened for superior strength without snapping. The small trim-head size and neutral color also makes Kreg Deck Screws great for a variety of other outdoor projects. This box contains ,700 screews with 51 mm length for 19-27 mm decking and will last for Deck of about 3x6 m (with 40 mm subconstruction distance).

DKK 1341.00

1

KREG Protec-Kote Deck skruer 51mm

- Create a better, more beautiful deck with Kreg® Deck Screws and a Deck Jig Designed to work with the Kreg® Deck Jig, these superior-quality screws feature a self-tapping tip and aggressive threads for fast, easy driving, plus a smooth upper shank to help pull deck boards tightly against the joist. Case-hardened construction makes them super strong, and a three-layer Protec-Kote finish ensures they'll last outdoors. The small trim-head size and neutral color also makes Kreg Deck Screws great for a variety of other outdoor projects. This box contains 700 creews with 51 mm length for 19-27 mm decking and will last for Deck of about 3x6 m (with 40 mm subconstruction distance).

DKK 681.00

1

KREG Precision Router Table Fence

- This innovative, anodized-aluminum fence features a table saw-style T-square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot. The fence adjusts easily with just one hand, and locks firmly in place with dual locks: A large paddle lock on the infeed end, and a quarter-turn lock on the outfeed end that prevents fence deflection. A magnified measuring system with an adjustable measuring scale allows accurate setup with any bit. The included Micro-Adjuster allows you to dial in precision measurements exactly. Independent sliding fence faces can be positioned exactly where needed to provide workpiece support close to the bit, and to maximize chip collection into the fences built-in dust port. Two jointing rods come included in this system. Just slide them into position behind the outfeed fence face, and the fence doubles as a jointer for putting perfect edges on boards.

DKK 2250.00

1

KREG Pocket-Hole Jig 310

- The Pocket-Hole Jig 310 makes it easier than ever to build DIY wood projects whether you're building your first DIY project, or you've been working with wood for years. The Pocket-Hole Jig works with materials from 13 mm to 38 mm thick. The Jig features a hardened-steel drill guide and thickness stops for 13 mm, 19 mm and 38 mm material that give the versatility you need to build with boards and plywood. If space is tight you can even remove the thickness stopp for better access. The KPHJ310 can be used as single drill guide, multiple 310 drill guides can be mounted together or it can be combinde with the Pocket-Hole Jig 320 to provide even more versitility. The included material-thickness gauge and easy-set drill bit make setup simple, and the GripMaxx anti-slip base holds the jig precisely in position while you drill perfectly-positioned pocket holes every time. Durable construction ensures that the Kreg Pocket-Hole Jig 310 will deliver years of project-building and home-repair satisfaction.

DKK 243.75

1

MILESCRAFT Fremføring GrabberPLUS

- The GrabberPLUS™ offers an upgraded safety solution to the Grabber™ family of Milescraft push blocks. It’s great for extra control when using router tables, table saws, jointers, and bandsaws. The high-friction, diamond grip prevents boards from slipping. The added spring-loaded retractable heels secure the ends of your workpiece and guide it through your cut. The GrabberPLUS™ is a must-have for every woodworker!Spring-Loaded, Retractable Locking HeelsIncrease control during cuts to eliminate tear-out when ripping or routingDiamond Grip Rubber BottomNon-marring, non-slip TPE material provides maximum control to safely hold your workpiece in placeErgonomic, Tilted, Comfort Grip HandleProvides superior control and maximum grip, while keeping your hands away from the cutting tool and providing increased directional force against the fenceDurable BodyProvides maximum durability to safely control your workpiece in all applicationsHigh visibility yellow makes it easy to find in busy shopsSafety TipsEnsure GrabberPLUS™ is firmly and securely on the workpieceEnsure a safe distance between the saw blade and the edge of GrabberPLUS™Check and clean diamond grip pad with compressed air, or if that is not available, with water and soap, as necessary

DKK 156.25

1

KREG Pocket-Hole Jig XL

- Product information "Kreg Pocket-Hole Jig XL"Create pocket holes with twice the strength using the Kreg Pocket-Hole Jig XL. This extra-large jig makes it easy to build big and build strong using 2x4 or 4x4 boards, paired with the impressive holding power of XL Pocket-Hole Screws.The Pocket-Hole Jigs XL features hardened-steel drill guides that position the stepped XL drill bit at the perfect angle for extra-large pocket holes. The two drill guides position a pair of pocket holes at ideal spacing on the width of a 2x4 or 4x4 – but spacing can be adjusted by twisting the two drill guides apart easily to use them separately.The GripMaxx™ material on the underside of the jig helps it stay put while you drill. The jig includes a clamp pad adapter to secure your jig easily with Kreg clamps, as well as many other brands.Combined with the strength of XL Pocket-Hole Screws, which are specially engineered with extra holding power, the Pocket-Hole Jig XL is perfect for building big. Adjusts easily to material size Twist-apart dual drill guides Clamps securely during use Simple drill bit setup Works with Kreg XL Screws

DKK 646.00

1

MILESCRAFT D/T FeatherBoard

- Safely and precisely cut boards on edge with exceptional balance and consistent tension using the D/T FeatherBoard™. The Milescraft D/T FeatherBoard™ has maximum holding pressure created by unique split rail construction. Pre-load tension design maintains consistent pressure across the face of the feather board. A sturdy spacer is included to adequately guide tall stock through the blade of your power tool. The included 5/8″ and 3/4″ miter bars and T-slot bolts enable the device to work in tandem with nearly any router table or table saw. Dual slide motion and S-style knobs provide quick, easy and proper installation and prevent overtightening damage to components. High visibility yellow makes units easy to find in busy shops.D/T FeatherBoard™ FeaturesDesigned to hold workpieces securely against the power tool’s fence when cutting or miteringErgonomic knobs help prevent over-tightening and are easy to loosenMounting hardware included for nearly any dual or tandem operationUnique pre-load tension design allows consistent cuts with reduced chance of kickbackSplit-rail miter bar construction provides maximum hold3/4″ and 5/8″ wide miter bars and T-slot bolts includedCan be mounted to the left or the right of the blade

DKK 281.25

1

MILESCRAFT Limbøtte GlueBottle150

- The GlueMate150™ by Milescraft is the perfect glue accessory for everyone. From master craftsmen to first-time DIY’ers, this 5 oz. advanced glue bottle makes for quick and accurate application. The small size is great for little projects of tight spaces.The secret is the two-chamber design. When pressure is applied the glue is sent from the bottom of the storage chamber up through the smaller application chamber. This allows you to control the flow and deliver just the amount of glue you need. It even allows for vertical application – You can put glue anywhere, at any angle!Included with the GlueMate150™ are 2 different application tips. A fine point cone applicator allows you to lay down a fine bead of glue on narrow boards or in dowel holes or other joints. The flat biscuit applicator tip has a wide profile making it great for biscuit joints, or just spreading a wider bead of glue on bigger boards.GlueMate150™ Features:Double chamber system allows for gluing at any angleNarrow application tube helps you control flow and apply precise amounts of glue2x applicator tips for different occasionsFine cone Applicator for fine beadsFlat biscuit Applicator for wide flat beadsHolds 5 oz. of wood glue or other liquidsFill with your favorite brand of glue!*Glue not included.

DKK 50.00

1

KREG Arbejdsbord Mobile Project Center KWS1000

- Make any place your workspace. Work on projects wherever, whenever, and however you need to!MultifunctionalThe Mobile Project Center is a workbench, sawhorse, assembly table, and clamping station all in one — a versatile workspace for DIY, repair, and woodworking projects. It’s easy to set up and store away, and it provides a sturdy platform for all kinds of project tasks. Plus, the Mobile Project Center includes clamping accessories, so it’s ready to go to work, right out of the box.portable WorkspaceThe Mobile Project Center provides a portable workspace that can be used for a wide variety of project tasks. In one mode, it’s a sturdy sawhorse that’s great for supporting long boards as you cut. Flip the large tables into position and this product offers the features you’d expect to find in a high-end stationary workbench.Clamp Track for Automaxx ClampThe Clamp Trak and included Bench Clamp with Automaxx® Auto-Adjust Technology provide multiple ways to hold workpieces. The open tables can support up to 158kg (350 pounds), and have built-in storage trays, holsters for your drill, and more. A shelf underneath holds up to 11.3kg (25 pounds) of supplies and tools out of the way but close at hand while you work.ideal for Kreg JoineryIn addition to being great for general project use, the Mobile Project Center is perfect for Kreg Joinery. Whether you’re drilling pocket holes, clamping cases or face frames together, or preparing your project for final assembly, the Mobile Project Center makes Kreg Joinery even easier.create your own workspaceThe Mobile Project Center is simple to use. Just spread the legs, and it’s set up as a sawhorse. You can even add a 2x4 cutting surface using the included hardware. Flip one or both tables into position, and the Mobile Project Center is ready to take on many other tasks. When you’re done, simply pull the tabs on the table braces, fold the tables down, and close the legs, and the Mobile Project folds down for easy, out-of-the-way storage.XXL WorkbenchThere are also multiple ways to use two Mobile Project Centers together. You can attach two side-by-side for an extra-large surface, or span between two benches by placing 2x4s in the included brackets. That lets you create a large surface for cutting big pieces, or an extra-large workbench by resting a piece of plywood on the 2x4 boards. Technical SpecificationsWork Surface 70x80cm (27 3/4" x 31 1/2")Table Height 80cm (31 1/2")Load Capacity 158kg (350 lbs.)Storage Shelf 45x66cm (17 3/4" x 26")Folds 16.5cm (6 1/2") thick when foldedWeight 18kg (40 lbs.) Includes(1) Mobile Project Center(1) Kreg Bench Clamp with Automaxx® Technology(4) Kreg Bench Dogs(2) support brackets(2) Trak bushings(2) connection keys(1) owner’s manual

DKK 2371.00

1

MILESCRAFT Limbøtte GlueBottle450

- The GlueMate450™ by Milescraft is the perfect glue accessory for everyone. From master craftsmen to first-time DIY’ers, this 15oz. advanced glue bottle makes for quick and accurate application. The large size holds enough glue to be your everyday go-to gluing solution.The secret is the two-chamber design. When pressure is applied the glue is sent from the bottom of the storage chamber up through the smaller application chamber. This allows you to control the flow and deliver just the amount of glue you need. It even allows for vertical application – you can put glue anywhere, at any angle!Included with the GlueMate450™ are 2 different application tips. A fine point cone applicator allows you to lay down a fine bead of glue on narrow boards or in dowel holes or other joints. The flat biscuit applicator tip has a wide profile making it great for biscuit joints, or just spreading a wider bead of glue on bigger boards.GlueMate450™ Features:Double chamber system allows for gluing at any angleNarrow application tube helps you control flow and apply precise amounts of glue2x applicator tips for different occasionsFine cone Applicator for fine beadsFlat biscuit Applicator for wide flat beadsHolds 15 oz. of wood glue or other liquidsFill with your favorite brand of glue!*Glue not included.

DKK 57.50

1

MILESCRAFT Boreguide undercoverjig PocketJig400

- Creating professional quality pocket hole results has never been easier with the Milescraft PocketJig400™.Solid aluminum construction ensures accurate pocket holes and a long product life. The hardened steel bushings, dust extraction, and sleek design will make this your go-to for pocket hole joints going forward.A convenient storage drawer contains markings for all common board thicknesses to make setting the depth stop simple and easy. For mobile or repair jobs, the clamping wall of the PocketJig400™ is removable, turning it into a hand-held jig that fits and clamps almost anywhere.All-Metal ConstructionIncreased rigidity reduces the flex for more precise resultsDurable Drill GuidesHeight and width adjustable bushing blocks contain two, 3/8″ steel drill guides that can be positioned for drilling boards from 1/2” up to 1-1/2” thick and holes from ¾” to 3” apartDial In The PressureSteel toggle clamp with micro-adjust clamp-head dials in perfect clamping pressure for different board thicknessesStore Your StuffConvenient storage drawer holds bits, drivers, depth stops, and more and contains markings for all common board thicknesses to make setting the depth stop simple and easyPortable Pocket HoleL-Base can be removed from main body and used for mobile pocket hole projects and repairsAccessories IncludedKit comes complete with 3/8” Pocket Hole Bit, T20 Magnetic Driver, 3/8” Split-Ring Depth Stop, 60 Pocket Hole Screws, 10 Pocket Plugs, and 3mm Hex Key.

DKK 702.50

1

Flex Girafsliber GE5 +SH m/slange & taske

- Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditionsEasy guiding: by optimal balance between motor and sanding headReliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.Electronic: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheelEffective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environmentOption of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tubeEasy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attachedDust-proof on/off switchVery flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any toolsAccording to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishingVery large areas and rooms up to 3.40 m in height can be processed thanks to the optional application of the GM 340The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe® does not have to be mounted and is immediately ready for useGimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.Power input: 500 wattPower output: 270 wattNo load speed: 1100-1650 rpmSanding disc Ø: 225 mmTool fixture: hook-and-loopTilt angle on the head: 100 °Cable length: 5,0 mWeight: 3,9 kg

DKK 8690.00

1

KREG Pocket-Hole Jig 320 "Kreg Jig "

- The Complete Pocket-Hole Kit for Building DIY Wood ProjectsThe Kreg® Pocket-Hole Jig 320 makes it easier than ever to build DIY wood projects—whether you’re building your first DIY project, or you’ve been working with wood for years. The Pocket-Hole Jig 320 works with materials from 13mm to 38mm thick. It features two drill guides, a removable spacer, and thickness stops for 13mm, 19mm, and 38mm material that give the versatility you need to build with boards and plywood found in home centers. The included material-thickness gauge and easy-set drill bit make setup simple, while the convenient clamp adapter and anti-slip base hold the jig precisely in position while you drill perfectly-positioned pocket holes every time. The jig and it’s included components all store in a durable, compact case that even has space for to store Kreg Pocket-Hole Screws—with 40 sample screws included. Durable construction and hardened steel guides ensure that the Kreg Pocket-Hole Jig 320 will deliver years of project-building and home-repair satisfaction and value you expect from the #1 pocket-hole brand—Kreg. Technical DescriptionBody Material Glass-filled nylon, hardened steelFor Use with Materials from 13mm- to 38mm-thick; with adjustable stops at 13mm, 19mm, 38mmDrill Guide Spacings 19mm, 38mm, unlimited when drill guides separatedNumber of Drill Guides (2) 9.5mm (3/8") diameter standard Kreg® pocket holeScrew-Centering Ability 9.5mm to unlimitedClamping Method Included Universal Clamp Adapter works with Kreg Face Clamps and a variety of other clamps Includes(2) Drill Guide with Material Thickness Stops(1) Drill Guide Spacer(1) Easy-Set Drill Bit and Stop Collar(1) Material Thickness Gauge/Hex Wrench(1) 152mm Square-Drive Bit(1) Carrying Case(40) Sample ScrewsOwner’s Manual

DKK 430.00

1

KREG Overfræser bord "gulvmodel"

- Product information "Precision Router Table System"The All-In-One Solution for Precision RoutingUnmatched Versatility, Incredible AdjustabilityThe Kreg Precision Router Table System combines unmatched versatility with incredible adjustability and ease of setup to take your woodworking projects to the next level. This powerful system offers a large, durable table top, a one-of-a-kind T-square style fence, and a durable steel stand that work together to create a router table that meets all of your precision-routing needs. Multi-Purpose, Self-Squaring Router Table Fence SystemAt the heart of the system is the Kreg's Precision Router Table Fence. This innovative, anodized-aluminum fence features a table saw-style T-Square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot.The fence adjusts easily with just one hand and locks firmly in place with dual locks: a large paddle lock on the infeed end, and a quarter-turn lock on the outfeed end that prevents fence deflection. To ensure exact positioning, the fence features a measuring scale that allows you to position the fence and make adjustments based on the bit you are using. An included micro-adjust wheel makes setups simple to ensure precision.Built-In Dust Collection and Jointing FeatureIndependent sliding fence faces can be positioned exactly where needed to provide workpiece support close to the bit and to maximize chip collection into the fence’s built-in dust port. Plus, two jointing rods are included. Just slide them into position behind the outfeed fence face, and the fence doubles as a jointer for putting perfect edges on boards. High-Performance Precision Router Table TopThe fence sits on Kreg’s large, durable Precision Router Table Top. This 24" x 32" (609mm x 813mm) table has a 1"-thick (25mm) MDF core that absorbs vibration and offers mass to help create a stable router table. A tough surface, made from high-pressure laminate, helps workpieces glide easily. Underneath, steel-reinforcing struts ensure that the table will stay flat to provide years of dependable service. A keyhole slot in the table accepts the quarter-turn fence lock and allows the fence to be removed easily for freehand routing operations. In addition, the table comes equipped with a combination miter-gauge/T-track to accept a miter gauge and other accessories. Four (4) included Precision Insert-Plate Levelers keep plate and table top surfaces perfectly flush. Heavy-Duty, Easily-Adjustable Steel StandTo make routing even easier, the table and fence sit atop a heavy-duty stand. Made from heavy-gauge steel, the stand can be adjusted from 31" to 39" (78.7cm to 99.1cm) high, and has levelers to compensate for uneven floors. Plus, the stand has predrilled holes that make it easy to mount accessories and to customize the stand. Create a Custom Router Table SystemCreate a custom router table system to meet all of your routing needs with the Kreg Precision Router Table Top and Kreg Multi-Purpose Shop Stand. Or, create your own system with a shop-made table top and stand. Note: Router bit hole must be located 406mm from the right side of the table. Fits 25mm tables without modification. Thinner or thicker tables may require modification.Technical DescriptionFence 36" (914mm) heavy-duty anodized aluminum; T-square style saw carriage; independent sliding fence faces with laminate surface and dual locking bitsTable Heavy-duty 1"-thick (25mm) core to support large routers and lifts; steel reinforcing strutsStand Adjustable from 29" to 35" (609mm x 813mm); heavy-duty 12- and 16-gauge steel; powder-coated finishDrill-Guide Spacings 14mm, 22mm, 36mmClamping Method Toggle clamp on benchtop baseScrew-Centering Ability 12mm, 16mm, 19mm, 22mm, 25mm, 28mm, 31mm, 35mm, 38mmIncludes(1) 609mm x 813mm work table with a 25mm thick MDF core(1) durable Easy-Slide™ surface, and steel reinforcing struts(1) 9mm thick, 235mm x 298mm insert plate(3) Level-Loc reducing rings(1) brass starting pin(4) precision insert-plate levelers(1) Kreg®’s T-square style Precision Router Table Fence with micro-adjust, dual fence locks, and adjustable measuring scale(1) durable, heavy-guage steel stand that’s adjustable from 78.7cm to 99.1cm high(4) leg levelers(1) detailed owner’s manual with usage instruction

DKK 5900.00

1

Mærke

Butik

Pris (EUR)