ProfitSpring | B2B PPC Agency

Apollo End-to-End Optical Beam Detector 29600-929

Apollo End-to-End Optical Beam Detector 29600-929The Conventional End-to-End Optical Beam Detector has been designed using the latest optical technology incorporating modern industrial electronic and software techniques. This detector offers cost effective protection of large open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. The Conventional End-to-End Optical Beam Detector is ideal for applications where line of sight for the IR infra-red detection path is narrow and where the building structure uses reflective surfaces. It has also been designed to be aesthetically pleasing and thus can equally suit modern architectural buildings as well as heritage sites particularly where ornate ceilings exist.Key FeaturesFull icon-based easy-to-use LCD display on the low level controller for ease of commissioning testing and maintenanceAesthetically pleasing to suit modern architectural buildings and heritage sitesRange 5 to 120 metresLaser assisted alignment combined with easy to use alignment LEDs enables installation by one operatorSeparate FireFault Relaysper DetectorSelectable sensitivitythreshold levelsAutomatic Gain control AGC for drift compensationAdjustment bracket offers up to 180 degrees movement in both planes and a full 360 degree rotation. It also fits 29600-524 and 29600-525 heads.

GBP 897.00

1

Apollo Series 65 to Orbis Base Adaptor - ORB-BA-10008-APO

Apollo Series 65 to Orbis Base Adaptor - ORB-BA-10008-APOThis base adapter is used to allow Orbis detectors from the conventional range to be fitted to an existing Series 65 base. The apator helps to eliminate the need for the existing system to be rewired.

GBP 6.65

1

Apollo Orbis I.S. Base Adaptor ORB-BA-50008-APO

Apollo Orbis I.S. Base Adaptor ORB-BA-50008-APOThe Orbis IS Adaptor enables Orbis IS detector heads to be fitted into existing Series 60 IS bases in order to upgrade systems with minimal disruption.

GBP 12.74

1

Apollo Series 65 Base Mounted UV Flame Detector - 55000-025APO

Apollo Series 65 Base Mounted UV Flame Detector - 55000-025APOTheSeries 65 Base Mounted UV Flame Detector is designed to protect enclosed indoor areas where open flaming fires may be expected. The detector has a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation.This unit is designed to be installed on a conventional detection zone and is designed to be used in open areas where flaming fires may be expected. The 55000-025 has a UV sensor which is designed to react to UV radiation which is emitted by flames during combustion.Key Features Responds to stationary flames with no flickerSensitive to UV radiation emitted by flames during combustionCompact flame detector which fits intoSeries 65 basesZone-powered

GBP 764.40

1

Apollo XPander Remote Indicator Module - XPA-IN-14102-APO

Apollo XPander Remote Indicator Module - XPA-IN-14102-APODesigned and manufactured using the latest techniques and surface-mount technology to ensure component count is kept to a minimum whilst maximising reliability the XPander Remote Indicator Module is used to indicate the activation of an individual device or zone.Brand InformationThe device is powered by a low-voltage dual supply alkaline battery pack which has been tested to provide a five-year life at normal conditions 15C to 35C the condition of which is continually monitored. The system indicates the remaining battery capacity with a low battery condition being indicated as a fault allowing 30 days for the battery pack to be changed before unit failure occurs.An additional warning is also given seven days before unit failure occurs. Removal of the remote indicator from the fixing plate will indicate a fault condition. The device is fully compliant with EN 54-25 and incorporates a locking screw to prevent unauthorised removal.

GBP 209.51

1

Apollo XP95 Beacon Base with Isolator - 45681-333APO

Apollo XP95 Beacon Base with Isolator - 45681-333APOThe Visual Indicator Base is a loop-powered visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas. The visual indicator base can be used with either a detector fitted or with a cap as a stand-alone alarm device. The base is loop powered so needs no external power supply. It operates at 1728V DC and is polarity-sensitive.Device AddressingThe Base responds to its own individual address set with a DIL switch. It also responds to a group address set by means of a 4-segment DIL switch and to a synchronisation address which is embedded in the unit. Addresses 1 to 111 are used exclusively for individual addresses addresses 112 to 126 are used for group addressing while the synchronisation address to which all units respond is 0. Any Beacon Base on a loop may be freely assigned to a group. The address for any group must be chosen from the range 112126.Addresses 112126 may be used as individual addresses but only if the 4-segment DIL switch is not used ie group addressing is disabled. If the 4-segment DIL switch were set to any number other than the default 127 a pre-set analogue value of 4 would be transmitted to indicate a fault. The Base is normally polled by its individual address. It responds as described below. It is recommended that the synchronisation address 0 be sent by the control panel at regular intervals to align the internal clock of all sounders. The result is that the beacons are synchronised with each other when activated.Key FeaturesVisual indicator flash rate of once per secondSynchronisation of visual indicator flashIndividual and group addressingUnique visual indicator self-testLoop-poweredBuilt-in Isolator

GBP 35.83

1

Apollo DIN Rail Interface Enclosure 29600-239

Apollo DIN Rail Interface Enclosure - 29600-239The enclosures can be used for housing intrinsically safe IS barriers or DIN-rail mounted interfaces. The enclosures have a frosted polycarbonate lid through which LEDs can be viewed. A multi-purpose label that features a section for use with IS systems is supplied. For non-IS systems the part referring to IS can simply be removed.When using these enclosures with intrinsically safe systems it is important that segregation be provided between the IS and non-IS circuits. A distance of at least 50mm must be preserved between live conducting parts of IS and other circuits. If the enclosure is used as part of an IS circuit then it must always be installed inside the safe area. Never install these enclosures in the hazardous area.The smaller enclosure is suitable for one analogue addressable or two conventional IS circuits or up to four DIN-rail interfaces.Key FeaturesAllows multiple Interfaces to be housed togetherIP67 Rated

GBP 102.76

1

Apollo Series 65 Relay Base 12v 45681-508APO

Apollo Series 65 Relay Base 12v 45681-508The Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a latching position. For security systems the jumper is moved to another position so that the base is non-latching.OperationSeries 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.Mechanical ConstructionThe base is a white self-extinguishing polycarbonate moulding with zero-force nickel-plated steel terminals for attaching the detector. The moulding has an aperture to accept the locking grub screw built into the detector case. All electronic components including the relay are mounted on a PCB which is retained by two screws in the moulding.Product InformationThe Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a latching position. For security systems the jumper is moved to another position so that the base is non-latching.Key FeaturesDetector locking mechanismOne-way fitEasy to wireContains an earth connectorCan be used in fire and security systems

GBP 9.76

1

Apollo 45681-300APO Integrated Base Sounder - DIN-Tone with Isolator

Apollo 45681-300APO Integrated Base Sounder - DIN-Tone with IsolatorThe Integrated Base Sounder comprises of a base sounder with integral mounting base and is for use with Discovery or XP95 ranges. It is designed for indoor use.Electrical DescriptionThe integrated base sounder is line powered and needs no external power supply. It operates at 1728V DC and is polarity-sensitive.Mechanical ConstructionThe integrated base sounder is moulded in polycarbonate and has stainless steel contacts that accept solid or stranded cables of up to 2.5mm.Device AddressingADDRESSING The integrated base sounder responds to its own individual address set with a DIL switch. It also responds both to a group address set by means of a 4-segment DIL switch and to a pulsed-mode synchronisation address which is embedded in the unit. GROUP ADDRESSING It may be desirable in alarm conditions to switch more than one integrated base sounder simultaneously. To enable this sounders may be controlled as a group and given a group address which is common to all sounders in the group. When a device recognises its group address it will process the forward command bits but it will not return any data to the control panel on that ad dress. If it is required to confirm the status of the outputs of devices under group address control it is necessary to interrogate all devices in the group at their individual addresses.CommunicationXP95 Discovery and CoreProtocol compatibleKey FeaturesTwo tonesTwo volume ranges 55-75dBA and 75-91dBAIndividual and group addressingUnique acoustic self-testBuilt-in isolator

GBP 37.24

1

Apollo Integrated Base Sounder - Slow Whoop with Isolator 45681-290APO

Apollo Integrated Base Sounder - Slow Whoop with Isolator 45681-290APOThe Integrated Base Sounder is made up of a base sounder with integral mounting base. It is designed for indoor use.Key FeaturesTwo tonesTwo volume ranges 55-75dBA and 75-91dBAIndividual and group addressingUnique acoustic self-testBuilt-in isolatorDevice AddressingThe integrated base sounder responds to its own individual address set with a DIL switch. It also responds both to a group address set by means of a 4-segment DIL switch and to a pulsed-mode synchronisation address which is embedded in the unit. GROUP ADDRESSING It may be desirable in alarm conditions to switch more than one integrated base sounder simultaneously. To enable this sounders may be controlled as a group and given a group address which is common to all sounders in the group. When a device recognises its group address it will process the forward command bits but it will not return any data to the control panel on that ad dress. If it is required to confirm the status of the outputs of devices under group address control it is necessary to interrogate all devices in the group at their individual addresses.CommunicationXP95 Discovery and CoreProtocol compatibleBackward CompatibilityThe features of the Integrated base sounder are available only when the sounder is connected to a control panel with the appropriate software.

GBP 37.24

1

Apollo Orbis Intrinsically Safe Optical Smoke Detector with Flashing LED ORB-OP-52028-APO

Apollo Orbis Intrinsically Safe Optical Smoke Detector with Flashing LED ORB-OP-52028-APOThe Orbis IS Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.OperationThe Orbis I.S Optical Smoke Detector operates on the well-established light scatter principle. The remarkable optical design of the Orbis I.S. optical smoke detector allows it to respond to a wide spectrum of fires. The sensing chamber of the Orbis I.S. Optical Smoke Detector contains an optical sensor which measures back-scattered light. Sensitivity to black smoke is greatly improved.The detector is calibrated so that it is highly reliable in detecting fires but is much less likely to generate false alarms than ionisation smoke detectors. The stability of the detector - high reliability low false alarm rate - is further increased by the use of algorithms to decide when the detector should change to the alarm state.This removes likelihood of a detector producing an alarm as a result of smoke from smoking materials or from another non-fire source. The sensing chamber has been designed to keep out dust and other airborne contaminants.Key FeaturesReduces false alarmsRecommended for early warning of fire in most areasImproved sensitivity to black smokeCompensation for slow changes in sensitivityAlgorithms for reliability of alarm

GBP 83.96

1

Apollo Orbis I.S. Optical Smoke Detector ORB-OP-52027-APO

Apollo Orbis I.S. Optical Smoke Detector ORB-OP-52027-APOThe Orbis IS Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.OperationThe Orbis I.S Optical Smoke Detector operates on the well-established light scatter principle. The remarkable optical design of the Orbis I.S. optical smoke detector allows it to respond to a wide spectrum of fires. The sensing chamber of the Orbis I.S. Optical Smoke Detector contains an optical sensor which measures back-scattered light. Sensitivity to black smoke is greatly improved.The detector is calibrated so that it is highly reliable in detecting fires but is much less likely to generate false alarms than ionisation smoke detectors. The stability of the detector - high reliability low false alarm rate - is further increased by the use of algorithms to decide when the detector should change to the alarm state. This removes likelihood of a detector producing an alarm as a result of smoke from smoking materials or from another non-fire source. The sensing chamber has been designed to keep out dust and other airborne contaminants.Key Features Reduces false alarms.Recommended for early warning of fire in most areas.Improved sensitivity to black smoke.Compensation for slow changes in sensitivity.Algorithms for reliability of alarm.

GBP 83.96

1

Apollo Marine Series 65 Mounted UV Flame Detector 55000-026MAR

Apollo Marine Series 65 Mounted UV Flame Detector 55000-026MARThe Marine Series 65 Base Mounted UV Flame Detector is designed to protect enclosed indoor areas where open flaming fires may be expected. The detector has a fast acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation.OperationThe detector is sensitive to ultraviolet radiation emitted by flames during combustion. Since it requires only UV radiation the Flame Detector responds even to stationary flames with no flicker like cigarette lighters and blue gas flames. The detector is set to respond to ultraviolet radiation 185 to 260nm emitted by almost all flames including those invisible to the naked eye e.g. hydrogen fires.The detector has a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation and is designed for internal fully enclosed areas. Caution The detector will also detect electrical discharges from lightning or arc welding.Key FeaturesResponds to stationary flames with no flickerSensitive to UV radiation emitted by flames during combustionCompact flame detector which fits into 45681-200MAR baseZone-powered

GBP 920.40

1

Apollo Marine Intelligent Base Mounted UV Flame Detector 55000-027MAR

Apollo Marine Intelligent Base Mounted UV Flame Detector 55000-027MARThe Marine Intelligent Base Mounted UV Flame Detector is designed to protect enclosed indoor areas where open fires may be expected. The detector has a fast-acting response to flames up to 25m away and is equipped with a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation.ApplicationUV flame detectors are used when detection is required to be unaffected by convection currents draughts or wind. These include engine rooms in ships factories affected by draughts or wind and warehouses. They are fast reacting and respond to a flame more than 25m away. The UV flame detector is affected by arc welding electrical sparks lightning nuclear radiation and UV light sources. For applications where these phenomena are present a UV flame detector should not be used.OperationThe detector is sensitive to ultraviolet radiation emitted by flames during combustion. Since it requires only UV radiation the detector responds even to stationary flames with no flicker like cigarette lighters and blue gas flames.The detector is set to respond to ultraviolet radiation 185260nm emitted by almost all flames including those invisible to the naked eye e.g. hydrogen fires. The detector has a single UV sensor with a narrow spectral response in order to discriminate between flames and most spurious sources of radiation and is designed for internal fully enclosed areas. Caution The detector will also detect electrical discharges from lightning or arc welding.Key FeaturesResponds to stationary flames with no flickerSensitive to UV radiation emitted by flames during combustionCompact flame detector which fits into Discovery Marine baseLoop-powered

GBP 982.80

1

Apollo XP95 Mini Switch Monitor - 55000-760APO

Apollo XP95 Mini Switch Monitor - 55000-760APOThe Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback thesmaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call point.It is designed to monitor the state of one or more single pole volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment.The monitor is designed to fit into equipment with limited space or to be mounted within an enclosure such as a manual call point. The interrupt feature means the monitor can be used where a priority response is required in particular for monitoring an individual or a cone of conventional manual call points.

GBP 42.22

1

Apollo Marine DIN-Rail Switch Monitor Plus 55000-772MAR

Apollo Marine DIN-Rail Switch Monitor Plus 55000-772MARThe Marine DIN-Rail Switch Monitor Plus is designed to monitor the state of one or more single pole volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment. In addition it incorporates additional circuitry to monitor flow switches and provide a time delay in so doing. It also contains circuitry which can be used to reset a beam detector.OperationThe Marine DINRail switch monitor provides four input states to the control equipment normal fault pre-alarm and alarm. The unit has a red LED to indicate an alarm and a yellow LED to indicate a fault condition. The Marine DINRail switch monitor is loop-powered and operates at 1728V DC with protocol voltage pulses of 59V. The unit is designed to accept a maximum line resistance of 50ohm. The end-of-line resistor required is 20k ohm.

GBP 75.87

1

Apollo Marine Isolating Base 45681-286MAR

Apollo Marine Isolating Base 45681-286MARThe Isolating Base senses and isolates short circuit faults on XP95 and Discovery loops and spurs.OperationUnder normal operating conditions a low impedance is present between the IN and OUT terminals of the base so that power and signals pass to the next base in line. If a short-circuit or abnormally low impedance occurs the fall in voltage is sensed and the base isolates the negative supply in the direction of the fault.The isolated section is tested using a current pulse every five seconds. When the short-circuit is removed the power will automatically be restored. If it is a requirement that no device is lost in the event of a single short-circuit fault every detector should be fitted to an isolating base. In applications where it is not necessary to use an isolating base for each detector up to twenty detectors or equivalent surge current may be installed between isolating bases.Key FeaturesUp to 20 detectors or their equivalent load may be installed between isolating basesHigh-brightness LEDDetects wiring short-circuitsMinimises disruption from short-circuits

GBP 16.81

1

Apollo XP95 Ancillary Base Sounder 45681-276APO

Apollo XP95 Ancillary Base Sounder 45681-276APOThe Ancillary Base Sounder is a local-area sounder designed for indoor use. It can be connected only to detection systems using Discovery or XP95 detectors and control panels with appropriate software. The Ancillary Base Sounder is loop-powered and requires no external power supply. It operates at 1728V DC.The sounder incorporates a base into which a loop-powered beacon or an XP95 or Discovery detector is fitted. It is powered by the control panel via the loop wiring to which it is connected. Since the sounder is switched by the remote indicator output of the associated detector or beacon no remote indicator facility is available. A guaranteed sound output of 85dBA at 1 metre is achieved at a current consumption of only 3mA. The sounder generates very low current noise so that up to 126 sounders may be connected to a loop. The Ancillary Base Sounder responds to signals from the associated detector or beacon. It does not have an address of its own.Key FeaturesFor use on an XP95 Discovery systemSound output of 85dBA at 1 metreCurrent consumption of only 3mALoop-poweredResponds to signals from the associated detector does not have an address of its ownAdjustable volume controlIP23D rated

GBP 27.14

1

Apollo Orbis TimeSaver Sav-Wire Base ORB-SW-10005-APO

Apollo Orbis TimeSaver Sav-Wire Base ORB-SW-10005-APOThe Sav-Wire Base is designed to allow Orbis detectors to be used in Sav-Wire detection and alarm systems.Brand InformationOrbis is a range of conventional detectors which has been developed and tested to create advantages for fire engineers and installers as well as owners and users of buildings. Orbis is a range with modern styling and a mounting base that saves installation time. It is electrically compatible with Apollo Series 65 and previous ranges of conventional detector.Orbis is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range Apollo has put ease of installation and reliability in daily operation at the forefront of considerations. The attractive and compact design means that Orbis will blend in well with all architectural styles.Key Features Grouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismIs used in Sav-Wire systems

GBP 8.86

1

Apollo Orbis TimeSaver Relay Base - ORB-RB-10004-APO

Apollo Orbis TimeSaver Relay Base - ORB-RB-10004-APOThe TimeSaver Relay Base incorporates a single-pole voltage-free changeover contact for switching external equipment. When the detector changes to the alarm state the relay is energised causing the contact to change state. The contact will remain in this condition until the detector is reset.Brand InformationOrbis is a range of conventional detectors which has been developed and tested to create advantages for fire engineers and installers as well as owners and users of buildings. Orbis is a range with modern styling and a mounting base that saves installation time. It is electrically compatible with Apollo Series 65 and previous ranges of conventional detector.Orbis is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range Apollo has put ease of installation and reliability in daily operation at the forefront of considerations. The attractive and compact design means that Orbis will blend in well with all architectural styles.Key Features Grouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A

GBP 17.98

1

Apollo Intelligent Triple IR Flame Detector 55000-020APO

Apollo Intelligent Triple IR Flame Detector 55000-020APOThe Intelligent Triple IR Flame Detector IR3 is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency flickering infra-red radiation emitted by flames during combustion.Key Features Loop-poweredSensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeFalse alarms due to lighting or flickering sunlight are minimisedCompatible with Discovery and XP95 protocols

GBP 2098.20

1

Apollo Intelligent Flameproof IR3 Flame Detector 55000-021APO

Apollo Intelligent Flameproof IR3 Flame Detector 55000-021APOThe Intelligent Triple IR Flame Detector IR3 is designed to protect areas where open flaming fires may be expected. It is sensitive to low frequency flickering infra-red radiation emitted by flames during combustion.Key Features Loop-poweredSensitive to flickering IR radiationDetects through films of oil dust water and iceResponds to flickering flames including those invisible to the naked eyeFalse alarms due to lighting or flickering sunlight are minimisedCompatible with Discovery and XP95 protocols

GBP 2854.80

1

Apollo XP95 I.S. Mounting Base 45681-215APO

Apollo XP95 I.S. Mounting Base 45681-215APOThe XP95 IS Mounting Base has been designed to accept only IS products. This ensures that standard detectors cannot inadvertently be fitted into an intrinsically safe system. XPERT cards are supplied with all bases. The XP95 IS Base for the intrinsically safe range is not identical with that for the standard range. This ensures that standard detectors cannot inadvertently be fitted to an intrinsically safe system.Key FeaturesWide cable entry.Contains no electronic parts.One way only fitLow insertion force.Large terminations.Lockable security fitting.White finish.Must be connected to a suitable safety barrier and protocol translator.

GBP 7.10

1

Apollo Marine Intelligent Base Mounted IR3 Flame Detector 55000-029MAR

Apollo Marine Intelligent Base Mounted IR3 Flame Detector 55000-029MARThe Intelligent Base Mounted IR3 Flame Detector is designed to protect all indoor areas even in dirty or smoky conditions where open flaming fires may be expected. The detector has three IR sensors that respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation.ApplicationThe triple IR flame detector is also fast reacting but is also tolerant of fumes vapours steam dust and mist while being unaffected by the phenomena listed above. It may however be affected by modulated IR radiation. Triple IR flame detectors are used in waste handling colour printing and paper manufacturing.OperationThe detector is sensitive to low-frequency flickering infra-red radiation emitted by flames during combustion. Since it responds to flickering radiation the detector can operate even if the lens is contaminated by a layer of oil dust water-vapour or ice. The detector is set to respond to low-frequency radiation at 1-15Hz 0.75-2.7ym in order to detect all flickering flames including those invisible to the naked eye e.g. those emitted by hydrogen fires.The detector has three IR sensors that respond to different IR wavelengths in order to discriminate between flames and spurious sources of radiation. False alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques.Key FeaturesResponds to stationary flames with no flickerSensitive to low-frequency flickering IR radiation emitted by flames during combustionCompact flame detector which fits into Discovery Marine mounting basesLoop-poweredFalse alarms due to factors such as flickering sunlight are avoided by a combination of filters and signal processing techniques

GBP 1177.80

1

Apollo Orbis Optical Smoke Detector - ORB-OP-12001-APO

Apollo Orbis Optical Smoke Detector - ORB-OP-12001-APOThe Orbis Optical Smoke Detector operates on the well-established light scatter principle. The sensing technology used is radically different from previous optical detectors and significantly reduces false alarms. Orbis operates on the well-established light scatter principle. The remarkable optical design of the Orbis optical smoke detector allows it to respond to a wide spectrum of fires. The sensing chamber of the Orbis optical smoke detector contains an optical sensor which measures back-scattered light as well as the more usual forward-scattered light.Sensitivity to black smoke is greatly improved. The detector is calibrated so that Orbis is highly reliable in detecting fires but is much less likely to generate false alarms than earlier smoke detectors. The stability of the detectorhigh reliability low false alarm rateis further increased by the use of algorithms to decide when the detector should change to the alarm state. This removes the likelihood of a detector producing an alarm as a result of smoke from smoking materials or from another non-fire source.Brand InformationOrbis is a range of conventional detectors which has been developed and tested to create advantages for fire engineers and installers as well as owners and users of buildings. Orbis is a range with modern styling and a mounting base that saves installation time. It is electrically compatible with Apollo Series 65 and previous ranges of conventional detector.Orbis is a demonstration of Apollos commitment to the market for high quality conventional detectors for use in small to medium size installations. In developing this range Apollo has put ease of installation and reliability in daily operation at the forefront of considerations. The attractive and compact design means that Orbis will blend in well with all architectural styles.Key FeaturesResponds well to slow burning smouldering firesTransient rejection algorithms reduce false alarmsAutomatic drift compensation with DirtAlert a yellow flashing LED to easily identify dirty detectorsRed flashing LED at StartUp confirms the device is operatingSensAlert yellow flashing LED indicates faulty operationFasTest takes just four seconds to test and confirm detectors are functioning correctlyDustDefy system prevents dust ingress while maintaining airflow

GBP 17.24

1

Brand

Merchant

Price (EUR)