31 results (0,14912 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APO

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APO

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APOThe Intelligent Open-Area Sounder has beendesigned for use in open areas and can be connected to any Discovery or XP95 system.Key Features Self-test fault monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of tonesIndividual and group addressingBuilt in isolatorRed or white optionsLoop-poweredIP65 rated

GBP 44.81
1

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APOThe Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system.Key Features Self-test monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBAIndividual and group addressingSynchronisation of tones and flashesBuilt in isolatorLoop-poweredIP65 ratedRed and clear lens options

GBP 69.17
1

Apollo Discovery Marine Optical Smoke Detector 58000-600MAR

Apollo Discovery Marine Optical Smoke Detector 58000-600MAR

Apollo Discovery Marine Optical Smoke Detector 58000-600MARThe Discovery Marine Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.Operating PrinciplesThe Discovery Marine Optical Smoke Detector has a white moulded polycarbonate case with wind-resistant smoke inlets.The indicator LEDs are colourless when the detector is in quiescent state and red in alarm. Within the case is a printed circuit board which on one side has the light-proof chamber with integral gauze surrounding the optical measuring system and on the other the signal processing and communications electronics.An infra-red light emitting diode within its collimator is arranged at an obtuse angle to the photo-diode. The photo-diode has an integral daylight-blocking filter.The IR LED emits a burst of collimated light every second.In clear air the photo-diode receives no light directly from the IR LED because of the angular arrangement and the chamber baffles. When smoke enters the chamber it scatters light from the emitter IR LED onto the photo-diode in an amount related to the smoke characteristics and density. The photo-diode signal is processed to provide an analogue value for transmission when the detector is interrogated.Maintenance ServiceDetectors should be maintained according to BS 5839-1 or other locally applicable code. Test Equipment can be ordered from us which can test smoke and heat detectors. Detectors should not be cleaned in the field except for careful removal of exterior dirt with a damp cloth.Key FeaturesResponds well to slow-burning smouldering firesSuitable for bedrooms and escape routesUnaffected by wind or atmospheric pressureRemote test featureRejection of transient signals

GBP 59.16
1

Apollo Discovery Sounder Beacon Base with Isolator 45681-393APO

Apollo Discovery Sounder Beacon Base with Isolator 45681-393APO

Apollo Discovery Sounder Beacon Base with Isolator 45681-393APOThe Discovery SounderVisual Indicator Base makes full use ofthe Discovery protocol. For ease of commissioning a Magnetic Wand can be used to test and adjust each sounder locally.Key Features It is possible to set individual control of the sounder and visual indicatorVolume and tone settings can be selected from the control panelTones can be used for other purposes in addition to warning of fire ideal for schoolsEnables soft start option ideal for hospitals and nursing homesElectronic bell tone

GBP 59.87
1

Apollo Orbis Conventional Duct Smoke Detector - 53546-023APO

Apollo Orbis Conventional Duct Smoke Detector - 53546-023APO

Apollo Orbis Conventional Duct Smoke Detection - 53546-023APOThe Conventional Duct Smoke Detector provides early detection of smoke in the air moving through heating and ventilation HVAC ducts in commercial and industrial premises. Its purpose is to prevent the re-circulation of smoke from an area on fire to areas unaffected by the fire when used with a Orbis detector. It provides a volt-free changeover relay rated at 30V 1A.Key Features For use with Orbis detectorsOperates in air speeds of 0.5ms to 20msTransparent cover to view detector head LEDIntegral smoke test portVolt-free contacts

GBP 71.44
1

Apollo Series 65 Conventional Duct Smoke Detector - 53546-021APO

Apollo Series 65 Conventional Duct Smoke Detector - 53546-021APO

Apollo Conventional Duct Smoke Detection - 53546-021APOThe Conventional Duct Smoke Detector provides early detection of smoke in the air moving through heating and ventilation HVAC ducts in commercial and industrial premises. Its purpose is to prevent the re-circulation of smoke from an area on fire to areas unaffected by the fire when used with a Series 65 detector. It provides a volt-free changeover relay rated at 30V 1A.Key Features For use with Series 65 detectorsOperates in air speeds of 0.5ms to 20msTransparent cover to view detector head LEDIntegral smoke test portVolt-free contacts

GBP 71.44
1

Apollo 45681-330APO Intelligent Sounder Visual Indicator Base with Isolator

Apollo 45681-330APO Intelligent Sounder Visual Indicator Base with Isolator

Apollo 45681-330APO Intelligent Sounder Visual Indicator Base with IsolatorThe low volume range is useful in areas such as hospitals where a fire alert is initially intended to warn staff only. The sounder is set to the high range for general use. Synchronisation of tones ensures the integrity of the signaltones from different sounders do not merge into one signal that could be mistaken for a different tone. Group addressing is a simple method of alerting an entire area or group of rooms without delay.For systems requiring isolators at every point the built-in isolator saves installation time and cost. The acoustic self-test means that the sounder listens to itself when it is switched on. If no sound is detected a fault signal is transmitted when the sounder is polled.The beacon self-test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the sounder beacon base has been switched on a fault signal is transmitted when the device is next polled.Key FeaturesTwo volume ranges 55-75dBA and 75-91dBAVisual indicator flash rate of once per secondSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and visual indicator self-testBuilt-in Isolator

GBP 58.67
1

Apollo Discovery Manual Call Point with Isolator 58100-908APO

Apollo Discovery Manual Call Point with Isolator 58100-908APO

Apollo Discovery Manual Call Point with Isolator 58100-908APOA seven-segment DIL switch enables addressing of each call point at commissioning stage. When operated the manual call point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.Discovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms.Key FeaturesPlug and Play terminal connections for fast wiringContinuity link for wiring test before commissioningReports an alarm in under 0.2 secondsResettable element

GBP 53.12
1

Apollo Discovery Marine Manual Call Point 58100-970MAR

Apollo Discovery Marine Manual Call Point 58100-970MAR

Apollo Discovery Marine Manual Call Point 58100-970MARThe Discovery Marine Manual Call Point MCP is based on the KAC conventional MCP range. It is electronically and mechanically compatible with previous Apollo call points based on KACs World Series product. The address of each call point is set at the commissioning stage by means of a seven-segment DIL switch.If an MCP is activated it interrupts the normal protocol to give a fast response. A single bi-coloured alarm LED is provided on the manual call point. This LED is controlled independently of the call point by the control panel and may be set to flash each time the call point is polled. The red LED is illuminated when the call point has been activated and sent into alarm.On the isolated versions an amberyellow LED indicates a short-circuit on the loop wiring either side of the call point. Call points can be remotely tested from the panel by transmission of a single bit in the communications protocol. Call points respond by providing a value of 64 which corresponds to the alarm value. The panel should recognise this response as a test signal and should not raise a general alarm.Key FeaturesFlashing LED option to indicate polling Discovery systems onlyPlug and Play terminal connections for fast wiringContinuity link for wiring test before commissioningReports an alarm in under 0.2 secondsResettable element

GBP 78.71
1

Apollo Intelligent Open-Area Clear Beacon - 55000-010APO

Apollo Intelligent Open-Area Clear Beacon - 55000-010APO

Apollo Intelligent Open-Area Clear Beacon - 55000-010APOThe Intelligent Open-Area Visual Indicator has been developed for use in situations where there is a risk that sounders will not be heard.All devices are powered directly from the loop and need no external power supply. They operate at 1728V DC and are polarity sensitive.All the alarm devices can be assigned group addresses as well as individual addresses so that the functional options of the sounder are identical with those of the Sounder Control Unit.Key FeaturesFor use with XP95 Discovery systemsSelf-test fault monitoringIP65 ratedIndividual and group addressingSynchronisation of flashes Comes with Isolating Base as standardLoop-powered

GBP 45.98
1

Apollo Discovery Red Open-Area Sounder Beacon - 58000-005APO

Apollo Discovery Red Open-Area Sounder Beacon - 58000-005APO

Apollo Discovery Red Open-Area Sounder Beacon - 58000-005APOThe Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol andhas beendesigned for use in indoor and open areas. Whenthe fire system is being commissioned a Magnetic Wand can be used to adjust and test each sounder locally.Key Features 15 tone pairsIt is possible to set individual control of the sounder and visual indicatorVolume and tone settings can be selected from the control panelTones can be used forother purposes in addition to warning of fire making the device ideal for use in schools etc.Soft start option ideal for hospitals and nursing homesGroup and global control for increased response time

GBP 73.38
1

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APOThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.You can perform a Self Test this is an important safety feature which has been incorporated into the Sounder VAD Bases when it is switched on it tests itself by checking the actual sound output and flash operation.There are 3 possible outcomes from the test if the transmitter readsA value of 1 Sounder fault this means there was no sound detected in 5 seconds of the sounder being switched on.A value of 2 VAD fault means there is no current being drawn by the LEDs.A value of 3 Sounder and VAD fault where neither of the above elements are operating correctly.If no sound is detected within 5 seconds of the Sounder VAD Bases being switched on it will transmit an analogue value of 1 sounder fault when it is next polled.This feature can also be used during commissioning or periodical maintenance testing. Simply activate the Sounder VAD for at least 5 seconds and check the control panel for a fault signal. If none is received the Sounder VAD Base is working properly.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt in isolator

GBP 72.02
1

Apollo XP95 Sounder Beacon Base - 45681-331APO

Apollo XP95 Sounder Beacon Base - 45681-331APO

Apollo XP95 Sounder Beacon Base - 45681-331APOThe Sounder Beacon Base are loop powered so needs no external power supply. It operates at 1728V DC and is polarity-sensitive. The Sounder Beacon Base are moulded in polycarbonate and has stainless steel contacts that accept solid or stranded cables of up to 2.5mm.The Sounder Beacon Bases will operate only with control equipment using the Apollo XP95 or Discovery protocol. The features of the Sounder Beacon Base are available only when it is connected to a control panel with the appropriate software.Key FeaturesTwo volume ranges 55-75dBA and 75-91dBAVisual indicator flash rate of once per secondSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and visual indicator self-test

GBP 58.67
1

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red Flash

Apollo SA5500-351APO Open-Area Sounder VID Red Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features suchas group global and individual control status reporting and selectable toneand volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volumelevelsSoftware defined group addressing with up to 16 groupaddressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo Discovery CO Heat Multisensor 58000-305APO

Apollo Discovery CO Heat Multisensor 58000-305APO

Apollo Discovery CO Heat Multisensor 58000-305APOThe Discovery COHeat Multisensor Detector is good at detecting deep-seated smouldering fires which give off a lot of CO as well as flaming fires. They are ideal for use in hotel bedrooms where steam may bepresent dusty environments or even where simulated smoke may bepresent.The Discovery COHeat Multisensor Detector contains a CO detection cell and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The way in which the signals from the two sensors are combined depends on the response mode selected. The COHeat Multisensor detects the presence of carbon monoxide or heat or a combination of both. The Multisensor construction is similar to that of a CO detector but uses a different lid in order to expose the thermistor to the surrounding air. The signals from the CO sensing cell and the thermistor are independent and represent the amount of CO or the temperature present in the vicinity of the detector. When the detector is used in heat only mode Mode 5 it operates as an A1R rate-of-rise heat detector with a static threshold of 58C.Brand InformationDiscovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms. Drift compensation further reduces the likelihood of false alarms caused by a build-up of dust in the sensing chamber.In addition to the familiar smoke and heat detectors the Discovery range features two multisensor detectors. One is an opticalheat multisensor which can be used to protect against many types of fire risk. The other is a carbon monoxideheat multisensor which protects against both smouldering fires and those generating heat.Operating PrinciplesDiscovery detectors are designed to be operated with purpose-designed control and indicating equipment that makes full use of their features. Discovery can however be connected to any fire control panel which can operate existing ranges of Apollo analogue addressable detectors with the previously noted rule that the control and indicating equipment must not have a drift algorithm operating on Discovery devices. Contact the fire control panel manufacturer for guidance.Maintenance ServiceDetectors should be maintained according to BS 5839- or other locally applicable code. Test equipment can be ordered from us which can test smoke and heat detectors.Key Features Responds to smouldering and flaming firesLess susceptible to false alarms caused by steam and dustFive response modesRemote test feature

GBP 77.17
1

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White Flash

Apollo SA5501-350APO Open-Area Sounder VID White Body White FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body White Flash

Apollo SA5500-350APO Open-Area Sounder VID Red Body WhiteFlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red Flash

Apollo SA5501-351APO Open-Area Sounder VID White Body Red FlashThe Intelligent Open-Area Sounder VID is designed for use in open-areas and can be connected to any CoreProtocol Discovery or XP95 system.The Intelligent Open-Area Sounder VID includes features such as group global and individual control status reporting and selectable tone and volume settings all configured through the fire control panel.AddressingThe Intelligent Open-Area VID responds to its own individual address which is set with the appropriate XPERT address card. Group address on CoreProtocol systems are set using the fire control panel.Key FeaturesAdjustable tone and volume 15 tone pairs seven volume levelsSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorIndependent control of sounder and visual indicatorSet-up and testing of devices at point of installationUnique acoustic self-test

GBP 71.24
1

Apollo XP95 Sounder VAD Base DIN-Tone with Isolator 45681-707APO

Apollo XP95 Sounder VAD Base DIN-Tone with Isolator 45681-707APO

Apollo XP95 Sounder VAD Base DIN-Tone with IsolatorThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.Maintenance ServiceDetectors should be maintained according to BS 5839-1 or other locally applicable code. Test equipment can be ordered from Apollo for testing smoke and heat detectors. Detectors should not be cleaned in the field except for careful removal of exterior dirt with a damp cloth. For cleaning and recalibration detectors should be returned to Apollo Fire Detectors or to the local distributor.Key FeaturesEN 54-23 Certified Category O VAD0.5Hz Flash Rate whiteSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt-in isolatorEN 54-3 Certified Sounder

GBP 83.74
1

Apollo Discovery Clear Open-Area Sounder Beacon - 58000-007APO

Apollo Discovery Clear Open-Area Sounder Beacon - 58000-007APO

Apollo Discovery Clear Open-Area Sounder Beacon - 58000-007APOThe Discovery Open-Area Sounder Visual Indicator makes full use of the Discovery protocol and has been designed for use in indoor and open areas. When the fire system is being commissioned a Magnetic Wand can be used to adjust and test each sounder locally.Discovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms.Key FeaturesIndividual control of the sounder and visual indicatorVolume and tone settings can be selected from the control panelTones can be used for other purposes in addition to warning of fire making the device ideal for use in schools etcSoft start option ideal for hospitals and nursing homesGroup and global control for increased response time

GBP 73.38
1

Apollo XP95 Intelligent Duct Smoke Detector - 53546-022APO

Apollo XP95 Intelligent Duct Smoke Detector - 53546-022APO

Apollo XP95 Intelligent Duct Smoke Detector - 53546-022APOThe Apollo AP53546-022APO Intelligent Duct Smoke Detector provides early detection of smoke in the air moving through heating and ventilation HVAC ducts in commercial and industrial premises. Its purpose is to prevent the re-circulation of smoke from an area on fire to areas unaffected by the fire when used with a XP95 or Discovery detector.How it worksThe duct smoke detector is fitted to the side top or bottom of the ventilation duct and has to tubes which extent into the air duct through holes in the wall. The perforated sampling tube which spans the duct is placed in the airflow upstream of the exhaust tube which causes a pressure differential in the duct detector. Air is sucked up the sampling tube across the detector and exhausted back into the air duct.Key FeaturesOperates in air speeds of 0.5ms to 20msTransparent cover to view detector head LEDIntegral smoke test port

GBP 71.44
1

Apollo Discovery Marine Heat Detector 58000-400MAR

Apollo Discovery Marine Heat Detector 58000-400MAR

Apollo Discovery Marine Heat Detector 58000-400MARDiscovery Marine analogue addressable fire detectors are suitable for larger vessels. The high specification range has been developed to meet the requirements of sophisticated systems. Discovery gives you total reassurance in installations where it is necessary to adapt detection to different operating environments and where protection against unwanted alarms is paramount.The Discovery Marine Heat Detector uses a single thermistor to sense the air temperature at the detector position. The thermistor is connected in a resistor network which produces a voltage output dependent on temperature. The design of the resistor network together with the processing algorithm in the microcontroller gives an approximately linear characteristic from 10C to 80C. This lineariser signal is further processed depending on the response mode selected and converted to an analogue output.Key FeaturesApproved for use in the marine environmentFive response modes for environmental adaptationDaynight switching for increased flexibilityDrift compensation for false alarm reductionUser programmability for dataXPERT card addressing for increased securityIdeal in environments that are dirty or smokyUnaffected by wind or atmospheric pressureRemote test feature

GBP 64.84
1

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APO

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APO

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APOThe Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system. A nominal sound output of 100dBA is achieved at a current consumption of 5mA in the case of the sounder and 8mA for the sounder beacon. Many control panels will be able to drive up to 20 sounders and up to 15 sounder beacons per loop on average.The maximum number of devices that may be connected to a particular loop should however be determined by a loop loading calculation using the Apollo Loop Calculator. Since the alarm devices are intended for use in open areas it is possible for more than one device to be audible at any given point in a building. For this reason the operation of all may be synchronised by the control panel.Key FeaturesSelf-test monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBAIndividual and group addressingSynchronisation of tones and flashesBuilt in isolatorLoop-poweredIP65 rated

GBP 69.17
1

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APO

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APO

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APOThe Intelligent Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery or XP95 system. A nominal sound output of 100dBA is achieved at a current consumption of 5mA in the case of the sounder and 8mA for the sounder beacon. Many control panels will be able to drive up to 20 sounders and up to 15 sounder beacons per loop on average.The maximum number of devices that may be connected to a particular loop should however be determined by a loop loading calculation using the Apollo Loop Calculator. Since the alarm devices are intended for use in open areas it is possible for more than one device to be audible at any given point in a building. For this reason the operation of all may be synchronised by the control panel.Key FeaturesSelf-test fault monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of tones Individual and group addressingBuilt in isolator Red or white optionsLoop-poweredIP65 rated

GBP 44.81
1