100 results (0,15116 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Apollo 29600-799 Talentum Test Torch

Apollo 29600-799 Talentum Test Torch

Apollo 29600-799 Talentum Test TorchThe Talentum Test Torch recreates the characteristic spectrum of a flame using a combination of UV and IR bulbs. Once testing is complete the Test Torch can store your test results for download to a PC.The Talentum Test Torch is a test and calibration unit designed to work with the full range of Apollo flame detectors.Using the intuitive menu choose the type of flame detector to be tested squeeze the trigger and the unit will automatically perform a test from a distance of up to 6 metres which means that in many applications the flame detector can be tested from ground level.The unit recreates the characteristic spectrum of a flame using a combination of UV and IR bulbs. Once testing is complete the Test Torch can store your test results for download to a PC. The Test Torches integral battery is recharged via USB from either a PC or an off the shelf USB charger.Key Features1m to 6m testing rangeAccurately simulates a pan fireOperating temperature -10C to 55C

GBP 2340.00
1

Apollo SA7800-870APO Touch Screen Portable Test Set Unit

Apollo SA7800-870APO Touch Screen Portable Test Set Unit

Apollo SA7800-870APO Touch Screen Portable Test Set UnitThe Apollo Test Set is a portable test unit featuring a touch screen display capable of providing several functions in interrogating and controlling all devices connected to the unit either individual devices or compete circuits of analogue addressable devices in the Apollo ranges CoreProtocol Discovery and XP95.How does the product workThe standard view allows devices to be scanned and controlled through the manipulation of the devices output bits. Devices can also be self-tested using the test set and the different functionality modes can also be controlled. The unit may be powered from an AC mains charger unit or from its own internal batteries. The loop or individual address can be connected to the unit using loop connection ports which are located on the top of the device.What problem does this help solveThe device also has the functionality to test the diagnostics and integrity of the loop to find earth faults etc. The device offers fault finding capabilities which allows for time spent on site to be cut down during the commissioning stage of the system installation. The result of this is time reduced on site for the end user which reduces the overall costs of installing Apollo systems.Kit ContainsThe Apollo Test Set UnitA universal chargerTwo red connector cablesTwo black connector cablesTwo yellow connector cablesGreen connector cableXPERT 8 Intelligent Mounting BaseCarry strapQuick Start Guide

GBP 828.46
1

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APOThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.You can perform a Self Test this is an important safety feature which has been incorporated into the Sounder VAD Bases when it is switched on it tests itself by checking the actual sound output and flash operation.There are 3 possible outcomes from the test if the transmitter readsA value of 1 Sounder fault this means there was no sound detected in 5 seconds of the sounder being switched on.A value of 2 VAD fault means there is no current being drawn by the LEDs.A value of 3 Sounder and VAD fault where neither of the above elements are operating correctly.If no sound is detected within 5 seconds of the Sounder VAD Bases being switched on it will transmit an analogue value of 1 sounder fault when it is next polled.This feature can also be used during commissioning or periodical maintenance testing. Simply activate the Sounder VAD for at least 5 seconds and check the control panel for a fault signal. If none is received the Sounder VAD Base is working properly.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt in isolator

GBP 72.02
1

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red Flash

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red Flash

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red FlashThe Conventional Open-Area Wall Sounder VAD is used to provide audible and visual warning of a fire. Combining an EN 54-3 compliant sounder with an EN 54-23 compliant VAD enables this device to be used in areas that require the use of both an audible and a visual alarm.Key FeaturesFor use outdoorsRed body with red flashConventional

GBP 176.29
1

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8The XP95 Open-Area Visual Alarm Devices VADs have been developed as primary or supplementary alarm devices. The loop powered VAD may be used in situations where there is a risk that sounders will not be heard. It might also be required where deaf or hearing impaired persons may be present.Key FeaturesHigh intensity red LEDsEN 54-23 compliant Category C VADCoverage C-3-8Flash Rate 0.5 HzFault signal if LED checked

GBP 45.24
1

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.The XP95 VAD Base is a loop-powered VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. The VAD base can be used with either a detector fitted or with a cap as a stand-alone device.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of VAD flashIndividual and group addressingUnique VAD self-testLoop-poweredBuilt in isolator

GBP 58.67
1

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APO

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APO

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APOThe Discovery Sounder VAD Base makes full use of the Discovery protocol. For ease of commissioning a Magnetic Wand can be used to test and adjust each sounder VAD locally.Key FeaturesEN54-23 certifiedFlash rate of 0.5HzIt is possible to set individual volume of the sounder from the panel15 pairs of tones including IMO code 1A General Emergency Alarm and IMO Code 2 All ClearBuilt in isolatorBrand InformationDiscovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms. Drift compensation further reduces the likelihood of false alarms caused by a build-up of dust in the sensing chamber. In addition to the familiar smoke and heat detectors the Discovery range features two multisensor detectors. One is an opticalheat multisensor which can be used to protect against many types of fire risk. The other is a carbon monoxideheat multisensor which protects against both smouldering fires and those generating heat.OperationThe Discovery Multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor heat sensor. The Discovery OpticalHeat Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The way in which the signals from the two sensors are combined depends on the response mode selected.The five modes provide response behaviour which incorporates pure heat detection pure smoke detection and a combination of both. The multisensor is therefore useful over the widest range of applications. The signals from the optical smoke sensing element and the temperature sensor are independent and represent the smoke level and the air temperature respectively in the vicinity of the detector.The detectors micro-controller processes the two signals according to the mode selected. When the detector is operating as a multisensor the temperature signal processing extracts only rate-of-rise information for combination with the optical signal. In these modes the detector will not respond to a slow temperature increase even if the temperature reaches a high level. A large sudden change in temperature can however cause an alarm without the presence of smoke if sustained for 20 seconds.

GBP 78.12
1

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7The RW1500-210APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92
1

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7The RW1500-220APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92
1

Apollo Series 65 Optical Smoke Detector with Flashing LED and Magnetic Test Switch 55000-315APO

Apollo Series 65 Optical Smoke Detector with Flashing LED and Magnetic Test Switch 55000-315APO

Apollo Series 65 Optical Smoke Detector with Flashing LED and Magnetic Test Switch 55000-315APOThe Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector and has an indicator LED which is clear in quiescent state but produces a red light in alarm.OperationThe Series 65 Optical Smoke Detector has a moulded self-extinguishing white polycarbonate case with wind resistant smoke inlets. Nickel-plated stainless-steel wiper contacts connect the detector to the base. Inside the case a printed circuit board has the optical system mounted on one side and the signal processing electronics on the other. The sensing chamber is a black moulding configured as a labyrinth which prevents penetration of ambient light. The labyrinth has a fine gauze insect-resistant cover. The chamber houses an infrared light emitting diode LED and a photo-diode which has an integral visible-light filter as extra protection against ambient light. Every three seconds the LED emits a burst of collimated light modulated at 4kHz. In clear air light from the LED does not fall directly on the diode because the LED is positioned at an obtuse angle to the diode. When smoke enters the chamber a fraction of the collimated light is scattered onto the photo-diode. If the resulting signal from the photo-diode is above a pre-set threshold the LED emits two more bursts of light this time at two-second intervals. If light is scattered onto the photo-diode by both these pulses due to the presence of smoke the detector signals an alarm state by switching the alarm latch on increasing the current drawn from the supply from about 40A to a maximum of 75mA. This fall in the impedance of the detector is recognised by the control panel as an alarm signal. The alarm current also illuminates the detector integral LED. A remote indicator connected between the L1 IN terminal and the R terminal will have a voltage equal to the supply voltage less 1 volt across it and so will illuminate. To ensure correct operation of the detector the control panel must be arranged to supply a maximum of 33 Volts dc and a minimum of 9 Volts dc in normal operation. The supply may fall to 6 Volts dc in alarm conditions if a supply current of at least 10mA is available at this voltage. To ensure effective illumination of the integral LED and any remote indicator the supply to the detector should exceed 12 Volts. To restore the detector to quiescent condition it is necessary to expel any smoke and interrupt the electrical supply to the detector for a minimum of one second.Key FeaturesResponds well to slow-burning smouldering firesWell-suited to bedrooms and escape routesUnaffected by wind or atmospheric pressureFlashing LED and magnet operated test switch option

GBP 19.98
1

Apollo Conventional Waterproof Call Point without LED - 55100-003APO

Apollo Conventional Waterproof Call Point without LED - 55100-003APO

Apollo Conventional Waterproof Call Point without LED - 55100-003APOApollos Conventional Manual Call Points have been designed to comply with EN 54-11. The Manual Call Point consists of a 470 resistor in series with a normally open switch contact.The Manual Call Point helps reduce installation time as all the initial installation cabling is wired to a terminal block which connects neatly to the call point. Once activated the manual call point can be reset by inserting the test key into the bottom of the unit until the key clicks into position. Remove the test key and push the front cover up until it clicks home.

GBP 104.38
1

Apollo XPander Sounder Beacon and Optical Smoke Detector XPA-CB-14020-APO

Apollo XPander Sounder Beacon and Optical Smoke Detector XPA-CB-14020-APO

Apollo XPander Sounder Beacon and Optical Smoke DetectorXPA-CB-14020-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectors remote test facility3-5 years battery life

GBP 370.69
1

Apollo XPander Sounder Beacon and CS Heat Detector XPA-CB-14022-APO

Apollo XPander Sounder Beacon and CS Heat Detector XPA-CB-14022-APO

Apollo XPander Sounder Beacon and CS Heat DetectorXPA-CB-14022-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 372.43
1

Apollo XPander Sounder Beacon and A1R Heat Detector XPA-CB-14021-APO

Apollo XPander Sounder Beacon and A1R Heat Detector XPA-CB-14021-APO

Apollo XPander Sounder Beacon and A1R Heat DetectorXPA-CB-14021-APOXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 372.43
1

Apollo Conventional Waterproof Manual Call Point without LED Yellow - 55100-004APO

Apollo Conventional Waterproof Manual Call Point without LED Yellow - 55100-004APO

Apollo Conventional Waterproof Manual Call Point without LED Yellow - 55100-004APOApollos Conventional Manual Call Points comply with EN 54-11 and are available in both indoor and outdoor variants. Apollo also offers a red variant suitable for alternative applications.OperationThe Manual Call Point consists of a 470 resistor in series with a normally open switch contact. The Manual Call Point helps reduce installation time as all the initial installation cabling is wired to a terminal block which connects neatly to the call point. Once activated the manual call point can be reset by inserting the test key into the bottom of the unit until the key clicks into position. Remove the test key and push the front cover up until it clicks home.

GBP 125.05
1

Apollo Series 65 Indoor Manual Call Point without LED - 55100-001APO

Apollo Series 65 Indoor Manual Call Point without LED - 55100-001APO

Apollo Series 65 Indoor Manual Call Point without LED - 55100-001APOApollos Conventional Manual Call Points comply with EN54-11 and are availablein both indoor and outdoor variants. Apollo also offers a yellow variant suitable for alternative applications.Operation The Manual Call Point consists of a 470 ohm resistor in series with a normally open switch contact. The Manual Call Point helps reduce installation time as all the initial installation cabling is wired to a terminal block which connects neatly to the call point. Once activated the manual call point can be reset by inserting the test key into the bottom of the unit until the key clicks into position. Remove the test key and push the front cover up until it clicks home.Key FeaturesPlug and play terminal connections for fast wiringResettable element

GBP 15.80
1

Apollo XPander White Sounder with Mounting Base XPA-CB-14002-APO

Apollo XPander White Sounder with Mounting Base XPA-CB-14002-APO

Apollo XPander White Sounder with Mounting Base XPA-CB-14002-APOThe XPander Sounder and Sounder Base is wireless and designed to be used with XPander detectors and manual call points.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface.The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch. Individual parts may be ordered separately.Key Featuresmodern stylingloop-powered interface operating on 868MHzwireless addresses seen by control panel as normal addressesradio base with wireless circuitry and battery compartmentchamber designed to inhibit dirt penetration and thus reduce false alarmsautomatic drift compensation with DirtAlert warningalgorithms for transient alarm rejectionFasTest reduces time taken to test detectorsremote test facility3-5 years battery life

GBP 240.92
1

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APO

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APO

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APOThe Intelligent Open-Area Sounder has beendesigned for use in open areas and can be connected to any Discovery or XP95 system.Key Features Self-test fault monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of tonesIndividual and group addressingBuilt in isolatorRed or white optionsLoop-poweredIP65 rated

GBP 44.81
1

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APOThe Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system.Key Features Self-test monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBAIndividual and group addressingSynchronisation of tones and flashesBuilt in isolatorLoop-poweredIP65 ratedRed and clear lens options

GBP 69.17
1

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APO

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APO

Apollo XPander Sounder Visual Indicator Clear and Optical Smoke Detector XPA-CB-14024-APOThe XPander Sounder and Sounder Base is wireless and designed to be used with XPander detectors and manual call points.OperationXPander sounders can be wall or ceiling mounted and use a bi-directional monitored radio platform to communicate. They feature 32 selectable tones including the Apollo tone and a self-test which causes a fault signal to be sent if the sounders fail to operate. The self-test feature is activated by a DIL Switch.Brand InformationXPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves.The detectors are multistate in that they report normal pre-alarm fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring.The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery detector contaminated detector tamper and low signal strength fault conditions.Key FeaturesWirelessBi-directional monitored radio platformChoice of 32 selectable tonesAudible self-test availableOutput is between 92 and 106dbA at 1m dependent on tone setting

GBP 372.43
1

Apollo Series 65 BR Heat Detector with Flashing LED - 55000-126APO

Apollo Series 65 BR Heat Detector with Flashing LED - 55000-126APO

Apollo Series 65 BR Heat Detector with Flashing LED - 55000-126APOThe Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature. There are 12 heat detectors in the Series 65 range designed to suit a wide variety of operating conditions.Brand InformationSeries 65 incorporates well-proven sensing technologies including an Integrated Circuit based on that used in XP95 analogue addressable detectors. The Series 65 range has a wide operating voltage of 933V and consists of ionisation integrating ionisation and optical smoke detectors four grades of heat detector and a range of bases.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal for environments that are dirty or smoky under natural conditionsWide operating voltage Flashing LED and magnet operated test switch optionProduct CodesDescriptions55000-126APOSeries 65 BR Heat Detector with Flashing LED55000-125APOSeries 65 BR Heat Detector with Flashing LED and Magnetic Test Switch55000-131APOSeries 65 CR Heat Detector with Flashing LED

GBP 14.72
1

Apollo Discovery Red Open-Area Voice Sounder - 58000-010APO

Apollo Discovery Red Open-Area Voice Sounder - 58000-010APO

Apollo Discovery Red Open-Area Voice Sounder - 58000-010APOThe Discovery Open-Area Voice Alarm Devices comprise of a sounder and a sounder visual indicatorthat have been designed to provide clear instructional messages through the Discovery protocol. They are loop-powered wall mounted devices.Key Features 4 pre-set message pairs capable of up to 15 tone message pairsLow current and high volumeFully synchronisedSet up and test at point of installation

GBP 129.07
1

Apollo Discovery Red Open-Area Voice Sounder Beacon - 58000-030APO

Apollo Discovery Red Open-Area Voice Sounder Beacon - 58000-030APO

Apollo Discovery Red Open-Area Voice Sounder Beacon - 58000-030APOThe Discovery Open-Area Voice Alarm Devices comprise a sounder and a sounder visual indicatorthat have been designed to provide clear instructional messages through the Discovery protocol. They are loop powered wall mounted devices.Key Features4 pre-set message pairs capable of up to 15 tone message pairsLow current and high volumeFully synchronised Set up and test at point of installation

GBP 157.73
1