ProfitSpring | B2B PPC Agency

Carrier 5709C-W Acoustic Glassbreak Tester For Testing Acoustic Glassbreak Sensors

Carrier 5709C-W Acoustic Glassbreak Tester For Testing Acoustic Glassbreak SensorsThe 5709C-W is a handheld acoustic glass break tester with real glass break sounds. The tester has different settings depending on what kind of glass you want to protect. In this way you will test the effective range.Key FeaturesReal glass break soundsDifferent settings for tempered plated and laminated glass

GBP 126.00

1

Carrier Q9033A DT Mounting Arm for Q9033 for use with DT Series Flame Detectors

Carrier Q9033A DT Mounting Arm for Q9033 for use with DT Series Flame DetectorsThe Q9033A Mounting Arm is an approved accessory for installation of X-Series flame detectors. It allows easy pan and tilt adjustments for sighting of the detector.In a typical installation the detector is pointed down.When a detector is pointed down panning to either side of centre results in some degree of rotation the greater the pan amount the greater the rotation.Since the cone of vision of the X3301X3302 is not round but truncated on the upper half rotation results in an unbalanced field of view. The Collar Attachment enables the detector to be adjusted level to the horizon thereby ensuring a balanced field of view.Key FeaturesCompatible with all X-Series flame detectorsFM and DNV performance approved for use with X-Series detectorsAllows easy detector sightingHeavy duty Aluminium or Stainless-Steel constructionVibration and resonant frequency resistant

GBP 725.63

1

Carrier CB-108A Main Board for GST116A amp 108A

Carrier CB-108A Main Board for GST116A 108AThe CB-108A is a Main Board for the GST116A 108A.

GBP 289.49

1

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable Entry

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable EntryThe C-94DB is a deep surface mounting sounder backbox for use with a range of addressable and conventional sounders and beacons.The C-94DB is suitable for use with the following productsI-9403 Intelligent Sounder BeaconI-9404 Intelligent SounderC-9403 Conventional Sounder BeaconC-9404 Conventional Sounder

GBP 9.14

1

Carrier C-9602LW-NG Conventional Natural Gas Detector - 220VAC cw Local Buzzer Alarm and Relay

Carrier C-9602LW-NG Conventional Natural Gas Detector - 220VAC cw Local Buzzer Alarm and RelayThe C-9602LW-NG Conventional Gas Detector is wall-mounted designed to check and monitor natural gas of leakage in such applications as houses hotels and apartments.The detector adopts semiconductor gas sensitive components enabling stable operation and simple installation. Its powered by AC 220V.Key FeaturesAvailable for LPG Natural Gas and Coal gasSelf-diagnosis function can monitor the inner faultBuilt-in relay contacts for control Gas ValveExtract etcBuilt-in SounderManual reset and control of relays contactWall mounting. Easy installation and connection220 VAC supply

GBP 56.59

1

Carrier KY-220 Panel Door Key K22 for GST200N

Carrier KY-220 Panel Door Key K22 for GST200NThe KY-220 is a spare or replacement panel door key designed for use with the GST200N control panel.

GBP 2.16

1

Carrier D-92WPB IP66 Weatherproof Box for DI-9204EE amp DC-9204E

Carrier D-92WPB IP66 Weatherproof Box for DI-9204EE DC-9204EThe D-92WPB Weather Proof Box is for designed for manual call point outdoor installations. It provides weather proofing and protects the manual call point from unwanted activation.The internal space is designed to suit most types of European style MCPs.Key FeaturesIP65 cover offers full protection of manual call pointMeets the requirement of 2 step operationClear and durable PC coverSurface mounting enables the easy installation60mm hole distance and enough internal space to suit most European style MCPReserved place for additional mirco-switch battery and buzzer

GBP 100.93

1

Carrier W72321 Low Profile Wall Bracket LPB2 For PQ And DT Series

Carrier W72321 Low Profile Wall Bracket LPB2 For PQ And DT SeriesThe W72321 is a wall-mounted bracket that allows for easier adjustment of the detectors angle.Key FeaturesBracket mountable on the wallEasy adjustment of the detector angleCan be used with Guardall DT PQ Platform DTX detectors

GBP 7.43

1

Carrier 2706AP-L SurfaceOverhead Mount Contact For High Security Applications

Carrier 2706AP-L SurfaceOverhead Mount Contact For High Security ApplicationsSentrols 2700 Series high security magnetic contacts with triple biased reeds are highly resistant to defeat by external magnet. For added security magnetic field tamper and pry tamper are standard features. Each 2700 contact and actuation magnet set is factory compensated for the effects of steel.ApplicationsThe 2700 Series are designed for protecting high-security facilities such as airports warehouses manufacturing plants banks and military bases.Durability and dependabilityThe Sentrol high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10000000 cycles guaranteeing a long life.Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory 100 of the time.High quality components and materialsReed legs are plated with rhodium or ruthenium and hermetically sealed in dry nitrogen. This offers superior protection against sticking and provides a moisture free environment therefore preventing corrosion.Key FeaturesTriple-biased reeds make defeat of the switch with an external magnet virtually impossibleMagnetic field tamper for added securityFactory compensated for effects of steel

GBP 234.68

1

Carrier GST852RP LocalPassive LCD Repeater Panel for GST100 GST200 GST200-2 GST5000

Carrier GST852RP LocalPassive LCD Repeater Panel for GST100 GST200 GST200-2 GST5000The GST852RP is a local passive LCD repeater panel for use with the GST100 GST200 GST200-2 GST5000W GST5000F GST5000 GST-IFP8.In case of fire the repeater panel will display the fire type time and location details together with sound for local notification. This addressable repeater is possible to be connected with GST addressable panels through RS485 links.Key FeaturesBig size LCD display with back-litCompatible with all GST intelligent panelsMute and lamp testElectrically addressing

GBP 340.79

1

Carrier GST-NRP00 Network Repeater Panel with Full Function Control for GST200N Series

Carrier GST-NRP00 Network Repeater Panel with Full Function Control for GST200N SeriesThe GST-NRP00 Network Repeater Panel is based on GST network technology providing remote control and indication of the fire alarm system.A certain network card is required for sitting to the network.1.0mm2 or above fire cable is recommended for communication cable and 1.5mm2 or above fire cable is recommended for power supply. All cables should be subject to local codes.Key FeaturesProvide remote display and control of systemPassword protected access level8X18 characters LCD screen15 LEDs to display important informationFunctional control of network panelsNetwork-wide operation Acknowledge Silence Reset.Flush-mount or surface-mount structureMeet network protocol by selecting suitable network card

GBP 466.38

1

Carrier P-9940A RS485 Network Card for GST200 amp GST200-2 for GST Control Panels

Carrier P-9940A RS485 Network Card for GST200 GST200-2 for GST Control PanelsThe P-9940A is an optional card for GST200 series control panels providing two photoelectric isolation RS485 interfaces.Key FeaturesTwo photoelectric isolation RS485 interfacesSuitable for ring network

GBP 166.20

1

Carrier CDC4-EN-MBC 4-8 Door Controller Spare PCB For Advisor Advanced - EN Approved

Carrier CDC4-EN-MBC 4-8 Door Controller Spare PCB For Advisor Advanced - EN ApprovedThe CDC4-EN-MBC is a spare PCB designed for use with the CDC4-EN 4-8 Door Controller for Advisor Advanced.

GBP 952.27

1

Carrier TVD-PPB TruVision Dome Pendant Ceiling Mount Bracket for TVD-CB5 TVD-CB3

Carrier TVD-PPB TruVision Dome Pendant Ceiling Mount Bracket for TVD-CB5 TVD-CB3The TVD-PPB is a pendant ceiling bracket which allows you to mount a variety of domes onto a ceiling. Additionally to its mounting function the bracket provides efficient cable management for the camera used.Key FeaturesPendant ceiling bracketCable managementUnified accessory for range of domesRugged designSuitable for outdoor and indoor use

GBP 35.08

1

Carrier B-9310 Surface Mount Back Box for Interface Modules

Carrier B-9310 Surface Mount Back Box for Interface ModulesThe B-9310 is a surface mounting backbox for use with the following range of interface modules.Compatible withC-9302 AC Control Interposing Relay ModuleC-9503E Short Circuit Loop IsolatorI-9300 Intelligent Addressable Single Input ModuleI-9301 Intelligent Addressable Single IO Interface ModuleI-9319 Intelligent Addressable Zone Monitor Module

GBP 3.35

1

Carrier EST_FlyCase Demo Set For EST Compact

Carrier EST_FlyCase Demo Set For EST CompactThis demo set is only dedicated for demo purposes training presentation. It must not be used for projects. No certification covers this equipment for real purposes.This Demo equipment includes a full set of mounted devices into a single RackEST-VES-4002-LNRHandle_Flycase

GBP 5164.81

1

Carrier VV600PS1 Seismic Detector For Safe And Vault ANPI

Carrier VV600PS1 Seismic Detector For Safe And Vault ANPIThe VV600 Plus series seismic detectors are designed to detect attempts to break into vaults safes night deposit boxes automatic teller machines ATMs and other reinforced physical areas such as data storages and filing cabinets. These seismic detectors react to the characteristic vibration patterns of all breaking-and-entering tools such as hammers drills diamond saws hydraulic pressure tools and thermal tools like welding torch and thermal lance. They sense vibrations that occur within a 3-to-14-meter radius of where they are mounted depending on the material and design of the protected object.At the same time the seismic detectors allow for normal human activity around the protected area without the risk of creating unwanted alarms. To achieve this high level of accuracy each detector features three detectors in one. All three channels counting integration and explosion analyse the signal frequencies duration and amplitude in order to differentiate between random environmental disturbances and real intruder attack. The end result is detectors with excellent detection and false alarm immunity.The VV600 Plus series provides two different test functions automatic or manual activated. You can choose between internal test of the detector electronics or by using the test transmitter VT705P do a functional test of the detector and its physical contact to the protected object. A complete range of accessories is provided for all kinds of applications to achieve the highest security.Key FeaturesDetects all known methods of attacksAdvanced signal processing differentiates between ambient noise and real attacksExtremely low current drawTwo options of testingAdjustable sensitivityFull-scale tamper protectionComplete line of accessoriesEasy to install

GBP 189.83

1

Carrier UVP-C180 100-180 cm Adjustable Ceiling Mount for UltraView PTZ Dome - Cable Management

Carrier UVP-C180 100-180 cm Adjustable Ceiling Mount for UltraView PTZ Dome - Cable ManagementThe UVP-C180 is a ceiling mount bracket for all pendant UltraView PTZ cameras UVP. Its adjustable length allows you to fit the camera as required for specific applications. The brackets cable management function allows for an efficient and aesthetically pleasing installation.Key FeaturesCeiling mountFits all UVP camerasAdjustable lengthCable management100-180 cm length

GBP 255.17

1

Carrier RB104A Relay Board for GST104A

Carrier RB104A Relay Board for GST104AThe relay board for conventional panel provides additional signal outputs for zonal fire and fault conditions. In case of fire or fault occurs in any zone the corresponding relay will be activated so that the conventional system can be integrated to 3rd party system.Key FeaturesCompatible panel GST104AOutput mode normally open dry contactOutput capacity 3A24VDC125VACStandards CE CPD EN54-2 EN54-4Certifications LPCBBS5839-1 compliantWEEE RoHS compliant

GBP 42.98

1

Carrier PB-800 Power Supply Board For IFP8

Carrier PB-800 Power Supply Board For IFP8A power supply board designed for use with the IFP8.

GBP 361.87

1

Carrier 1076D-N Recessed Contact For Steel Doors 9mm Gap NC 25mm Diameter With 30cm Lead White

Carrier 1076D-N Recessed Contact For Steel Doors 9mm Gap NC 25mm Diameter With 30cm Lead WhiteThe Sentrol 1078CT series steel door contacts are designed specifically for use in the steel doors commonly found in commercial building applications. Many models including wide gap SPDT and biased for high security applications make the 1078 series the most widely used and comprehensive line available.Easy InstallationThe unique housing design features a rugged body construction with flexible ribbed sides for quick secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances both make and break.Durability and dependabilityThe Sentrol high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10000000 cycles guaranteeing a long life.Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory 100 of the time.High quality components and materialsReed legs are plated with rhodium or ruthenium and hermetically sealed in dry nitrogen. This offers superior protection against sticking and provides a moisture free environment therefore preventing corrosion.Key FeaturesSpecial design for steel mountingSelf-lock mountingRugged constructionComprehensive product range

GBP 19.06

1

Carrier 3633-0053 Magicard - Enduro Cleaning Kit 10 Cards 1 Pen

Carrier 3633-0053 Magicard - Enduro Cleaning Kit 10 Cards 1 PenSecure high-quality print outputs and extend the lifespan of your Magicard printers with routine use of the Magicard 3633-0053 printer cleaning kit. For best results follow the recommended frequency of usage for optimum performance of your Magicard printers.Key FeaturesIncludes 10 cleaning cards and one cleaning penManufacturer recommends the use of cleaning kit on every ribbon replacementUse genuine Magicard Printer Cleaning Kits only for guaranteed results

GBP 49.68

1

Carrier TBC100 Replacement Battery Charger for use with Fire Test Kits

Carrier TBC100 Replacement Battery Charger for use with Fire Test KitsThe TBC100 is a replacement battery charger for use with fire test kits.

GBP 200.16

1

Carrier P-9930 RS232 Comms Board for GST200 amp GST200-2

Carrier P-9930 RS232 Comms Board for GST200 GST200-2The P-9930 RS232 card is an optional card for GST200 series control panels providing two photoelectric isolation RS232 interfaces for connecting with GST Graphic Monitor Centre and GST Defining Tool.This card shouldnt be inserted and removed when it is energized.When entering calibration mode pressing SK1 key reset main board it will display Colour CRT OK if registration is successful.Key FeaturesStandard RS232 and USB interfacesConnecting GST Graphic Centre and GST Defining Tool

GBP 98.21

1

Carrier 5150-W 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm Output

Carrier 5150-W 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm OutputThe Sentrol 5150 series glass break detector has been designed using the latest electronic techniques. This enables the detector to contain all the necessary circuitry for excellent detection whilst filtering out and rejecting all unwanted signals that would normally result in a nuisance alarms e.g. ultra-sound radio frequency interference etc. The 5150 series will provide a 3 m radius of protection. Suitable for use on standard window glass plate wired tempered and laminated glass.Due to the design of the product the detector may be fitted as close as 2.5 cm from the window frame and still provide a full 3 m radius. The 5150 series detectors are passive sensors therefore any number of detectors may be installed on the same windowpane without the risk of interaction. The detectors use a fail-safe normally closed open to alarm relay contact enabling compatibility with any standard burglar alarm control equipment.The output from the relay contact should be connected via the alarm 24-hour tamper loop in order to provide early signalling at the control whether the alarm is switched on or off. The opening of the normally closed relay contact signals the alarm.Easily installs with pre-cut specially formulated 3M adhesive tape.Key Features3 m radius of coverage measured from the sensorProtects all glass types up to a standard thickness of 6.4 mm includingplate wired tempered and laminated glassIdeal for 24-hours loop protectionTwo wire sensor drawing no power from the loopCompatible with most wireless transmitters

GBP 12.82

1

Brand

Merchant

Price (EUR)