36 results (0,14438 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

DnA Ramps and Access DnA Container Ramp 1000mm x 1000mm

DnA Ramps and Access DnA Container Ramp 1000mm x 1000mm

Perfect for pallet trucks!Allowing you to also bridge kerbs, steps, and small obstacles as well allowing easy access for loading and unloading any container.Manufactured using quality lightweight aluminium and an easy rest on connection allows easy deployment by one person and easy to store when not in use. The serrated flooring ensures traction during any form of weather while allowing goods to be loaded into containers with minimal effort. Our ramps are tapered straight to the ground and the truck, leaving a smooth incline/decline for the perfect transition on and off the ramp. DnA Container ramps can also be provided with nylon handle for easy carrying.All our Container ramps are tried and tested to a SWL of 1000kg and for heavy duty 1500kg though this can be modified to much greater capacity. We pride ourselves on offering variety, with lengths starting from 1000mm up to 2000mm and widths starting from 1000mm up to any bespoke measurement.FeaturesLightweight for easy handlingHand welded for durability that lastsRest on connection: to fit just rest on and start loadingHook on connection also availableNo fitting requiredManufactured from lightweight aluminium (type 6082 and equivalent) Load tested and certified to 750kg/1000kg with capacity for moreEasily stored flat or upright when not in use.Augmented ramp weight ensures the ramp stays connected to the containerPerfect for pallet trucksAngled edge to allow smooth access onto on floor containersAvailable with nylon handles for easy handlingPlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-tenth its length or \(Hmax = L/10\)

GBP 799.99
1

DnA Ramps and Access DnA Container Ramp 2000mm x 1000mm

DnA Ramps and Access DnA Container Ramp 2000mm x 1000mm

Perfect for pallet trucks!Allowing you to also bridge kerbs, steps, and small obstacles as well allowing easy access for loading and unloading any container.Manufactured using quality lightweight aluminium and an easy rest on connection allows easy deployment by one person and easy to store when not in use. The serrated flooring ensures traction during any form of weather while allowing goods to be loaded into containers with minimal effort. Our ramps are tapered straight to the ground and the truck, leaving a smooth incline/decline for the perfect transition on and off the ramp. DnA Container ramps can also be provided with nylon handle for easy carrying.All our Container ramps are tried and tested to a SWL of 1000kg and for heavy duty 1500kg though this can be modified to much greater capacity. We pride ourselves on offering variety, with lengths starting from 1000mm up to 2000mm and widths starting from 1000mm up to any bespoke measurement.FeaturesLightweight for easy handlingHand welded for durability that lastsRest on connection: to fit just rest on and start loadingHook on connection also availableNo fitting requiredManufactured from lightweight aluminium (type 6082 and equivalent) Load tested and certified to 750kg/1000kg with capacity for moreEasily stored flat or upright when not in use.Augmented ramp weight ensures the ramp stays connected to the containerPerfect for pallet trucksAngled edge to allow smooth access onto on floor containersAvailable with nylon handles for easy handlingPlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-tenth its length or \(Hmax = L/10\)

GBP 949.99
1

DnA Ramps and Access DnA Container Ramp 1500mm x 1000mm

DnA Ramps and Access DnA Container Ramp 1500mm x 1000mm

Perfect for pallet trucks!Allowing you to also bridge kerbs, steps, and small obstacles as well allowing easy access for loading and unloading any container.Manufactured using quality lightweight aluminium and an easy rest on connection allows easy deployment by one person and easy to store when not in use. The serrated flooring ensures traction during any form of weather while allowing goods to be loaded into containers with minimal effort. Our ramps are tapered straight to the ground and the truck, leaving a smooth incline/decline for the perfect transition on and off the ramp. DnA Container ramps can also be provided with nylon handle for easy carrying.All our Container ramps are tried and tested to a SWL of 1000kg and for heavy duty 1500kg though this can be modified to much greater capacity. We pride ourselves on offering variety, with lengths starting from 1000mm up to 2000mm and widths starting from 1000mm up to any bespoke measurement.FeaturesLightweight for easy handlingHand welded for durability that lastsRest on connection: to fit just rest on and start loadingHook on connection also availableNo fitting requiredManufactured from lightweight aluminium (type 6082 and equivalent) Load tested and certified to 750kg/1000kg with capacity for moreEasily stored flat or upright when not in use.Augmented ramp weight ensures the ramp stays connected to the containerPerfect for pallet trucksAngled edge to allow smooth access onto on floor containersAvailable with nylon handles for easy handlingPlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-tenth its length or \(Hmax = L/10\)

GBP 849.99
1

DnA Ramps and Access DnA Van Ramp 1500mm x 700mm

DnA Ramps and Access DnA Van Ramp 1500mm x 700mm

Manufactured using quality lightweight aluminium, with a rest-on connection that allows for straightforward deployment by one person.Easy to store, taking minimal van load.The serrated flooring ensures traction during any weather while allowing flight cases to be loaded with minimal effort.Tapered at both ends at the ground and the vehicle leaving a smooth incline/decline and perfect transition on and off the ramp.All our van ramps are tried and tested to a SWL of 750kg and for heavy duty 1000kg.We pride ourselves on offering variety, with lengths ranging between 1500mm-2400mm, widths 700mm-1100mm. Features:Lightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 750kg/1000kgEdges on each side of the van ramp to avoid steering off.Easily stored flat or upright when not in use.Please account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 519.99
1

DnA Ramps and Access DnA Access Ramp 1800mm x 900mm

DnA Ramps and Access DnA Access Ramp 1800mm x 900mm

The perfect handy tool to bridge any threshold!Manufactured using quality lightweight aluminium and an easy rest on connection allows easy deployment by one person and easy to store taking minimal space when not in use. The serrated flooring ensures traction during any form of weather while allowing wheelchairs to pushed with minimal effort. Our ramps are tapered straight to the ground and the threshold/doorway, leaving a smooth incline/decline for the perfect transition to and from any building step and doorway. The ramp can be supplied with nylon handles for easier handling and also handrail for further support when being used.All our access ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg though this can be modified to much greater capacity. We pride ourselves on offering variety, with lengths starting from 600mm up to 1800mm and widths starting from 700mm up to 10000mm covering most wheelchair and mobility scooter widths while offering the capability of further bespoke sizes when needed. Check out our bespoke access page for more bespoke solutions and permanent fixed ramps. FeaturesLightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 500kgEdges on each side of the ramp to avoid steering off.Easily stored flat or upright when not in use.No threshold/doorway modification required. Place and go!Nylon Handles AvailableHandrail AvailablePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-sixth its length or \(Hmax = L/6\)

GBP 599.99
1

DnA Ramps and Access DnA Van Ramp 1800mm x 700mm

DnA Ramps and Access DnA Van Ramp 1800mm x 700mm

Manufactured using quality lightweight aluminium, with a rest-on connection that allows for straightforward deployment by one person.Easy to store, taking minimal van load.The serrated flooring ensures traction during any weather while allowing flight cases to be loaded with minimal effort.Tapered at both ends at the ground and the vehicle leaving a smooth incline/decline and perfect transition on and off the ramp.All our van ramps are tried and tested to a SWL of 750kg and for heavy duty 1000kg.We pride ourselves on offering variety, with lengths ranging between 1500mm-2400mm, widths 700mm-1100mm. Features:Lightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 750kg/1000kgEdges on each side of the van ramp to avoid steering off.Easily stored flat or upright when not in use.Please account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 599.99
1

DnA Ramps and Access DnA Van Ramp 2400mm x 700mm

DnA Ramps and Access DnA Van Ramp 2400mm x 700mm

Manufactured using quality lightweight aluminium, with a rest-on connection that allows for straightforward deployment by one person.Easy to store, taking minimal van load.The serrated flooring ensures traction during any weather while allowing flight cases to be loaded with minimal effort.Tapered at both ends at the ground and the vehicle leaving a smooth incline/decline and perfect transition on and off the ramp.All our van ramps are tried and tested to a SWL of 750kg and for heavy duty 1000kg.We pride ourselves on offering variety, with lengths ranging between 1500mm-2400mm, widths 700mm-1100mm. Features:Lightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 750kg/1000kgEdges on each side of the van ramp to avoid steering off.Easily stored flat or upright when not in use.Please account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 619.99
1

DnA Ramps and Access DnA Van Ramp 1500mm x 900mm

DnA Ramps and Access DnA Van Ramp 1500mm x 900mm

Manufactured using quality lightweight aluminium, with a rest-on connection that allows for straightforward deployment by one person.Easy to store, taking minimal van load.The serrated flooring ensures traction during any weather while allowing flight cases to be loaded with minimal effort.Tapered at both ends at the ground and the vehicle leaving a smooth incline/decline and perfect transition on and off the ramp.All our van ramps are tried and tested to a SWL of 750kg and for heavy duty 1000kg.We pride ourselves on offering variety, with lengths ranging between 1500mm-2400mm, widths 700mm-1100mm. Features:Lightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 750kg/1000kgEdges on each side of the van ramp to avoid steering off.Easily stored flat or upright when not in use.Please account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 599.99
1

DnA Ramps and Access DnA Access Ramp 1800mm x 700mm

DnA Ramps and Access DnA Access Ramp 1800mm x 700mm

The perfect handy tool to bridge any threshold!Manufactured using quality lightweight aluminium and an easy rest on connection allows easy deployment by one person and easy to store taking minimal space when not in use. The serrated flooring ensures traction during any form of weather while allowing wheelchairs to pushed with minimal effort. Our ramps are tapered straight to the ground and the threshold/doorway, leaving a smooth incline/decline for the perfect transition to and from any building step and doorway. The ramp can be supplied with nylon handles for easier handling and also handrail for further support when being used.All our access ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg though this can be modified to much greater capacity. We pride ourselves on offering variety, with lengths starting from 600mm up to 1800mm and widths starting from 700mm up to 10000mm covering most wheelchair and mobility scooter widths while offering the capability of further bespoke sizes when needed. Check out our bespoke access page for more bespoke solutions and permanent fixed ramps. FeaturesLightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 500kgEdges on each side of the ramp to avoid steering off.Easily stored flat or upright when not in use.No threshold/doorway modification required. Place and go!Nylon Handles AvailableHandrail AvailablePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-sixth its length or \(Hmax = L/6\)

GBP 499.99
1

DnA Ramps and Access DnA Access Ramp 1500mm x 900mm

DnA Ramps and Access DnA Access Ramp 1500mm x 900mm

The perfect handy tool to bridge any threshold!Manufactured using quality lightweight aluminium and an easy rest on connection allows easy deployment by one person and easy to store taking minimal space when not in use. The serrated flooring ensures traction during any form of weather while allowing wheelchairs to pushed with minimal effort. Our ramps are tapered straight to the ground and the threshold/doorway, leaving a smooth incline/decline for the perfect transition to and from any building step and doorway. The ramp can be supplied with nylon handles for easier handling and also handrail for further support when being used.All our access ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg though this can be modified to much greater capacity. We pride ourselves on offering variety, with lengths starting from 600mm up to 1800mm and widths starting from 700mm up to 10000mm covering most wheelchair and mobility scooter widths while offering the capability of further bespoke sizes when needed. Check out our bespoke access page for more bespoke solutions and permanent fixed ramps. FeaturesLightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 500kgEdges on each side of the ramp to avoid steering off.Easily stored flat or upright when not in use.No threshold/doorway modification required. Place and go!Nylon Handles AvailableHandrail AvailablePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-sixth its length or \(Hmax = L/6\)

GBP 519.99
1

DnA Ramps and Access DnA Van Ramp 2100mm x 700mm

DnA Ramps and Access DnA Van Ramp 2100mm x 700mm

Manufactured using quality lightweight aluminium, with a rest-on connection that allows for straightforward deployment by one person.Easy to store, taking minimal van load.The serrated flooring ensures traction during any weather while allowing flight cases to be loaded with minimal effort.Tapered at both ends at the ground and the vehicle leaving a smooth incline/decline and perfect transition on and off the ramp.All our van ramps are tried and tested to a SWL of 750kg and for heavy duty 1000kg.We pride ourselves on offering variety, with lengths ranging between 1500mm-2400mm, widths 700mm-1100mm. Features:Lightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 750kg/1000kgEdges on each side of the van ramp to avoid steering off.Easily stored flat or upright when not in use.Please account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 699.99
1

DnA Ramps and Access DnA Van Ramp 1800mm x 900mm

DnA Ramps and Access DnA Van Ramp 1800mm x 900mm

Manufactured using quality lightweight aluminium, with a rest-on connection that allows for straightforward deployment by one person.Easy to store, taking minimal van load.The serrated flooring ensures traction during any weather while allowing flight cases to be loaded with minimal effort.Tapered at both ends at the ground and the vehicle leaving a smooth incline/decline and perfect transition on and off the ramp.All our van ramps are tried and tested to a SWL of 750kg and for heavy duty 1000kg.We pride ourselves on offering variety, with lengths ranging between 1500mm-2400mm, widths 700mm-1100mm. Features:Lightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 750kg/1000kgEdges on each side of the van ramp to avoid steering off.Easily stored flat or upright when not in use.Please account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 619.99
1

DnA Ramps and Access DnA Van Ramp 2100mm x 900mm

DnA Ramps and Access DnA Van Ramp 2100mm x 900mm

Manufactured using quality lightweight aluminium, with a rest-on connection that allows for straightforward deployment by one person.Easy to store, taking minimal van load.The serrated flooring ensures traction during any weather while allowing flight cases to be loaded with minimal effort.Tapered at both ends at the ground and the vehicle leaving a smooth incline/decline and perfect transition on and off the ramp.All our van ramps are tried and tested to a SWL of 750kg and for heavy duty 1000kg.We pride ourselves on offering variety, with lengths ranging between 1500mm-2400mm, widths 700mm-1100mm. Features:Lightweight for easy handlingHand welded for durability that lastsHook on connection also availableManufactured from lightweight aluminium (type 6082 and equivalent) No fitting requiredLoad tested and certified to 750kg/1000kgEdges on each side of the van ramp to avoid steering off.Easily stored flat or upright when not in use.Please account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 729.99
1

DnA Ramps and Access DnA Folding Van Ramp 2400mm x 900mm

DnA Ramps and Access DnA Folding Van Ramp 2400mm x 900mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent)Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 1139.99
1

DnA Ramps and Access DnA Folding Van Ramp 2400mm x 700mm

DnA Ramps and Access DnA Folding Van Ramp 2400mm x 700mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent)Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 949.99
1

DnA Ramps and Access DnA Folding Van Ramp 2100mm x 900mm

DnA Ramps and Access DnA Folding Van Ramp 2100mm x 900mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent)Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 1029.99
1

DnA Ramps and Access DnA Folding Van Ramp 2700mm x 700mm

DnA Ramps and Access DnA Folding Van Ramp 2700mm x 700mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent)Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 999.99
1

DnA Ramps and Access DnA Folding Van Ramp 1800mm x 700mm

DnA Ramps and Access DnA Folding Van Ramp 1800mm x 700mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent)Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 799.99
1

DnA Ramps and Access DnA Folding Van Ramp 1800mm x 900mm

DnA Ramps and Access DnA Folding Van Ramp 1800mm x 900mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent)Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 899.99
1

DnA Ramps and Access DnA Folding Van Ramp 2700mm x 900mm

DnA Ramps and Access DnA Folding Van Ramp 2700mm x 900mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent)Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 1199.99
1

DnA Ramps and Access DnA Folding Van Ramp 2100mm x 700mm

DnA Ramps and Access DnA Folding Van Ramp 2100mm x 700mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent)Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 899.99
1

DnA Ramps and Access DnA Lightweight Folding Van Ramp 2100mm x 700mm

DnA Ramps and Access DnA Lightweight Folding Van Ramp 2100mm x 700mm

Perfect lightweight ramp making operation effortless!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp. The lightweight ramp allows practically anyone to deploy effortlessly while maintaining it heavy duty features.All our Lightweight folding van ramps are tried and tested to a SWL of 400kg and for heavier loads visit our standard folding van ramp which can take up to 1000kg.We pride ourselves on offering variety, with lengths starting from 1500mm up to 2100mm and widths starting from 700mm up to 1000mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent) Load tested and certified to 400kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargeCan be stored upright taking up minimal spacePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 759.99
1

DnA Ramps and Access DnA Fixed Folding Van Ramp 1800mm x 900mm

DnA Ramps and Access DnA Fixed Folding Van Ramp 1800mm x 900mm

Perfect for the medical, removal and transport industry!Manufactured using quality lightweight aluminium, supplied with a fixed bracket attachment and gas strut which allows easy deployment by one person and easy to retract when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp. Supplied with an easy to install aluminium bracket that can be attached onto the floor of the any van to allow the ramp to be stored vertically at the rear of the van.All our folding van ramps are tried and tested to a SWL of 500kg and for heavy duty 1000kg. We pride ourselves on offering variety, with lengths starting from 1800mm up to 3000mm and widths starting from 700mm up to 1100mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent) Load tested and certified to 500kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 1499.99
1

DnA Ramps and Access DnA Lightweight Folding Van Ramp 1800mm x 700mm

DnA Ramps and Access DnA Lightweight Folding Van Ramp 1800mm x 700mm

Perfect lightweight ramp making operation effortless!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp. The lightweight ramp allows practically anyone to deploy effortlessly while maintaining it heavy duty features.All our Lightweight folding van ramps are tried and tested to a SWL of 400kg and for heavier loads visit our standard folding van ramp which can take up to 1000kg.We pride ourselves on offering variety, with lengths starting from 1500mm up to 2100mm and widths starting from 700mm up to 1000mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent) Load tested and certified to 400kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargeCan be stored upright taking up minimal spacePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 699.99
1

DnA Ramps and Access DnA Lightweight Folding Van Ramp 1500mm x 700mm

DnA Ramps and Access DnA Lightweight Folding Van Ramp 1500mm x 700mm

Perfect lightweight ramp making operation effortless!Manufactured using quality lightweight aluminium, supplied with hinge attachment to fold and store easily and discreetly when not in use. The serrated flooring ensures traction during any form of weather while allowing flight cases to be loaded with minimal effort. Our ramps are tapered straight to the ground and the van, leaving a smooth incline/decline for the perfect transition on and off the ramp. The lightweight ramp allows practically anyone to deploy effortlessly while maintaining it heavy duty features.All our Lightweight folding van ramps are tried and tested to a SWL of 400kg and for heavier loads visit our standard folding van ramp which can take up to 1000kg.We pride ourselves on offering variety, with lengths starting from 1500mm up to 2100mm and widths starting from 700mm up to 1000mm.FeaturesLightweight for easy handlingHand welded for durability that lastsManufactured from lightweight aluminium (type 6082 and equivalent) Load tested and certified to 400kgEdges on each side of the van ramp to avoid steering off.Easy rest on connectionHandles included free of chargeCan be stored upright taking up minimal spacePlease account for the thickness of materials used: The functional width of the ramp is 50mm less than its total. On models over 2.5m in Length, or with a SWL of >750kg, this reduction is 90mmFor safety reasons, we recommend that the ramp only be used to a height not exceeding one-third its length or \(Hmax = L/3\)

GBP 599.99
1