63 results (0,13252 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

The Fireray One Reflective Auto-Aligning Beam Detector 5m-50m

The Fireray One Reflective Auto-Aligning Beam Detector 5m-50m

The Fireray One Reflective Auto-Aligning Beam Detector 5m-50mPlease Note The standard detection range is 0 to 50m to achieve 0 to 120m you will need to buy the Reflective Long Range Kit. The Fireray One is a standalone beam detector that prioritises ease of installation. The new Fireray One is a beam detector that keeps simplicity at the forefront of design.Considering that beam detectors are often only a small part of the overall fire system we recognise that fire professionals need a simple beam detector that is accessible to anyone from experts to generalists system designers to field engineers while ensuring that the beam detector is going to perform perfectly in a variety of environments.For ease of design the Fireray One can be installed in places that could be exposed to sunlight such as skylights and glass atriums thanks to our patented Light Cancellation Technology. An extended detection range of 5m to 120m using the reflective long range kit allows installation of beam detectors into both large and small spaces. Its white minimalistic look fits well into modern architecture.The Fireray One BenefitsOne Minute Auto-Alignment The Fireray Ones one-minute auto-alignment feature not only saves time during installation the quality of alignment is also guaranteed by the automation protocol. Using the Fireray One a high level of protection is always achieved.One standalone product The Fireray One is a standalone reflective beam detector that requires no specialist tools or prior knowledge or training to get it up and working.One personal installation All of the internal and external features of the Fireray One ensure that anyone can align the beam detector perfectly because the experience and expert knowledge of beam detection has been engineered into the productMovement Tracker The Fireray One contains Building Movement Tracking that maintains its own alignment once installed. Its optics are fully enclosed in an IP-rated casing with a flat surface for easy cleaning without affecting alignment. An integrated user-interface at the front of the product allows realignment and programming without having to dismount the detector.

GBP 730.80
1

Fireray Heater Bracket for Fireray 3000

Fireray Heater Bracket for Fireray 3000

Fireray Heater Bracket for Fireray 3000The Fireray 3000 Anti-Condensation Heater has been designed to be used in environmental conditions where condensation affects the operation of optical beam smoke detectors. Condensation occurs when the surrounding air is at a higher temperature than the surface that it comes in contact with.As air contains water in the form of vapour this will deposit on the cooler surface thus forming condensation. The design of the Anti-Condensation Heater utilises forced air which results in a circulating current of warm air maintaining the detector lens at an incrementally higher temperature than the surrounding air. The heater will reduce the likelihood of condensation forming on the lens which in turn reduces the potential for false alarms.Key FeaturesBespoke bracket to ensure optimum performance of heaterDesigned to prevent the build-up of condensationFor use in temperature-controlled storage areas and cold environments

GBP 295.80
1

Fireray Heater Bracket for Fireray 5000

Fireray Heater Bracket for Fireray 5000

Fireray Heater Bracket for Fireray 5000The Fireray 5000 Anti-Condensation Heater has been designed to be used in environmental conditions where condensation affects the operation of optical beam smoke detectors. Condensation occurs when the surrounding air is at a higher temperature than the surface that it comes in contact with. As air contains water in the form of vapour this will deposit on the cooler surface thus forming condensation.The design of the Anti-Condensation Heater utilises forced air which results in a circulating current of warm air maintaining the detector lens at an incrementally higher temperature than the surrounding air. The heater will reduce the likelihood of condensation forming on the lens which in turn reduces the potential for false alarms.Key FeaturesBespoke bracket to ensure optimum performance of heaterDesigned to prevent the build-up of condensationFor use in temperature-controlled storage areas and cold environments

GBP 304.50
1

FFE Fireray 5000-104 Fireray 5000 System Long Range ULFM

FFE Fireray 5000-104 Fireray 5000 System Long Range ULFM

FFE Fireray 5000-104 Fireray 5000 System Long Range ULFMThe Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easy-fit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analysed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesUp to 2 Detector Heads reporting to One Ground Level ControllerBuilt in Laser assisted prism mountingAuto-Alignment 2 to 4 minutes per headAutoOptimise Auto-Correction due to building shiftBuilt-in electronic ULULCFM obscuration-acceptance fire testContamination compensationSeparate Trouble and Alarm relays for each of the 2 channelsPassword protected settingsLow current draw 5 to 8.5mABuilt-in 12M-20 conduit knock-outs on the system controllerProgrammable alarm thresholds 10 60 in 1 incrementsProgrammable Fault and Alarm delay 2-30 Seconds

GBP 1313.70
1

FFE Fireray 5000-113 Fireray 5000 System Long Range NF

FFE Fireray 5000-113 Fireray 5000 System Long Range NF

FFE Fireray 5000-113 Fireray 5000 System Long Range NFThe Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easy-fit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analysed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesUp to 2 Detector Heads reporting to One Ground Level ControllerBuilt in Laser assisted prism mountingAuto-Alignment 2 to 4 minutes per headAutoOptimise Auto-Correction due to building shiftBuilt-in electronic ULULCFM obscuration-acceptance fire testContamination compensationSeparate Trouble and Alarm relays for each of the 2 channelsPassword protected settingsLow current draw 5 to 8.5mABuilt-in 12M-20 conduit knock-outs on the system controllerProgrammable alarm thresholds 10 60 in 1 incrementsProgrammable Fault and Alarm delay 2-30 Seconds

GBP 1313.70
1

FFE Fireray 5000-103 Fireray 5000 System ULFM

FFE Fireray 5000-103 Fireray 5000 System ULFM

FFE Fireray 5000-103 Fireray 5000 System ULFMThe Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easy-fit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analysed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesUp to 2 Detector Heads reporting to One Ground Level ControllerRange of 26.25 ft. to 330 ft. 8m to 100mBuilt in Laser assisted prism mountingAuto-Alignment 2 to 4 minutes per headAutoOptimise Auto-Correction due to building shiftBuilt-in electronic ULULCFM obscuration-acceptance fire testContamination compensationSeparate Trouble and Alarm relays for each of the 2 channelsPassword protected settingsLow current draw 5 to 8.5mABuilt-in 12M-20 conduit knock-outs on the system controllerProgrammable alarm thresholds 10 60 in 1 incrementsProgrammable Fault and Alarm delay 2-30 Seconds

GBP 1191.90
1

FFE Fireray 5000-112 Fireray 5000 System NF

FFE Fireray 5000-112 Fireray 5000 System NF

FFE Fireray 5000-112 Fireray 5000 System NFThe Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easy-fit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analysed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesUp to 2 Detector Heads reporting to One Ground Level ControllerRange of 26.25 ft. to 330 ft. 8m to 100mBuilt in Laser assisted prism mountingAuto-Alignment 2 to 4 minutes per headAutoOptimise Auto-Correction due to building shiftBuilt-in electronic ULULCFM obscuration-acceptance fire testContamination compensationSeparate Trouble and Alarm relays for each of the 2 channelsPassword protected settingsLow current draw 5 to 8.5mABuilt-in 12M-20 conduit knock-outs on the system controllerProgrammable alarm thresholds 10 60 in 1 incrementsProgrammable Fault and Alarm delay 2-30 Seconds

GBP 1191.90
1

FFE Fireray 5000-003 Fireray 5000 Controller ULFM

FFE Fireray 5000-003 Fireray 5000 Controller ULFM

FFE Fireray 5000-003 Fireray 5000 Controller ULFMA spare Fireray 5000 controller.The Fireray 5000 Spare System Controller supports up to two Fireray 5000 beam detector heads.The Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easyfit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesSpare System Controller low levelLogs the 50 most recent eventsProgrammable sensitivity and fire thresholds20mm cable gland knock-outs on system controller2-wire interface from system controller to detectorWorking optical path for detector alignmentIdeally suited protecting large areas where use of traditional detectors would be difficultcostly to install5 year warranty

GBP 887.40
1

FFE Fireray 5000-001 Fireray 5000 Controller EN

FFE Fireray 5000-001 Fireray 5000 Controller EN

FFE Fireray 5000-001 Fireray 5000 Controller ENA spare Fireray 5000 controller.The Fireray 5000 Spare System Controller supports up to two Fireray 5000 beam detector heads.The Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easyfit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesSpare System Controller low levelLogs the 50 most recent eventsProgrammable sensitivity and fire thresholds20mm cable gland knock-outs on system controller2-wire interface from system controller to detectorWorking optical path for detector alignmentIdeally suited protecting large areas where use of traditional detectors would be difficultcostly to install5 year warranty

GBP 887.40
1

FIRERAY Anti-Condensation Prism Heater White - 1090-000

FIRERAY Anti-Condensation Prism Heater White - 1090-000

FIRERAYAnti-CondensationPrism Heater White - 1090-000The Fireray prism heater is designed to be used in environmental conditions where condensation affects the reflector of the optical beam smoke detectors.The heater will reduce the likelihood of condensation by maintaining the reflector at a higher temperature than the surrounding air. The heater pad is an efficient ultra slim heating pad which is fixed behind the mounting plate.Condensation occurs when the surrounding air is at a higher temperature than the surface that it comes in contact with. As air contains water typically in the form of vapour this will deposit on the cooler surface thus forming condensation.The Fireray prism heater increases the temperature of the prism through the mounting plate thus maintaining the reflector at a higher temperature than the surrounding air.This reduces the likelihood of condensation forming on the reflective prisms which in turn reduces the potential for false alarms.Key FeaturesUltra slim heating padDesigned to prevent the build-up of condensationFor use in temperature controlled storage areas and cold environmentsOptical beam smoke detector heaters also availablePrisms ordered separately

GBP 139.20
1

FFE Fireray 3000-103 Fireray 3000 System UL

FFE Fireray 3000-103 Fireray 3000 System UL

FFE 3000-103 Fireray 3000 System ULThe Fireray 3000 End to End Infra-red Optical Beam Smoke Detector OBSD has been designed using the latest optical technology incorporating modern industrial electronic and software techniques. This detector offers cost effective protection of large open area spaces with high ceilings.The Fireray 3000 is ideal for applications where line of sight for the IR infra-red detection path is narrow and where the building structure use reflective surfaces.The projected beam type smoke detector shall be listed to U.L. 268 and shall consist of up to two transmitters two receivers and a single low level remote control unit. The detector shall operate between a range of 16.5 ft. to 393 ft. 5m to 120m. The temperature range of the system shall be -4F to 131F -20C to 55C. The receiver shall include an integral built-in laser pointer to assist in optimum alignment.The beam detector shall feature automatic gain control which will compensate for gradual signal deterioration from dirt accumulation on the lenses. The receiver heads shall incorporate a Wide Field of View to ensure the unit is always receiving maximum signal available. The system shall include a low level remote display and control unit with LCD read-out for set-up reporting and testing of up to 2 separate sets of heads. The system shall be capable of sending separate Trouble and Alarm signals for each of the sets of heads. The system shall be capable of programming alarm thresholds of 25 to 60 in 1 increments. The system shall be capable of programming delay to fault and delay to alarm from 2 seconds to 30 seconds in 1 second increments.Key FeaturesSeparate Transmitter and Receiver HeadsLateral Spacing per NFPA 72 is 60 feetIntegral Laser Alignment in Receiver2-wire Interface between Controller and ReceiverSingle and Twin Channel capabilitySeparate Fire and Fault Relays per DetectorLow Level Controller with LCD displayProgrammable Sensitivity and Fire ThresholdAutomatic Gain Control AGC for drift compensationKnockouts for ease of installation and wiring

GBP 1392.00
1

FFE Fireray 5000-031 Fireray 5000 Detector ULFM

FFE Fireray 5000-031 Fireray 5000 Detector ULFM

FFE Fireray 5000-031 Fireray 5000 Detector ULFMA spare Fireray 5000 detector.The Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easyfit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesUp to 2 Detector Heads reporting to One Ground Level ControllerRange of 26.2 ft to 328 ft 8 m to 100 mLong range prism kit extends range from 160ft 50m to 330ft 100mBuilt in Laser assisted prism mountingAuto-Alignment 2 to 4 minutes per headAutOptimise Auto-Correction due to building shiftBuilt-in electronic ULULCFM obscuration-acceptance fire testContamination compensationSeparate Trouble and Alarm relays for each of the 2 channelsPassword protected settingsLow current draw 5 to 8.5mABuilt-in 12M-20 conduit knock-outs on the system controllerProgrammable alarm thresholds 10 60 in 1 incrementsProgrammable Fault and Alarm delay 2-30 Seconds

GBP 948.30
1

FFE Fireray 5000-046 Fireray 5000 Detector - Long Range ULFM

FFE Fireray 5000-046 Fireray 5000 Detector - Long Range ULFM

FFE Fireray 5000-046 Fireray 5000 Detector - Long Range ULFMA spare Fireray 5000 detector - long range.The Fireray 5000 System is an auto-aligning self-correcting infrared reflective beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition each system controller houses two pairs of fire and trouble relays one per detector. Once the detector head is installed using the easyfit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.The Auto-Align function ensures proper alignment and maximum signal during the beam installation. AutoOptimise automatically steers and maintains the beam in the optimum position for reliable performance. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level obscuration is reached.The system is designed to be mounted so the beam will project between 19 0.5m and 24 0.6m below the ceiling. Lateral detection may be up to 30ft. 9.144m on either side of the beam providing a maximum total coverage area of up to 19800 square feet 60ft. x 330ft. or 18.29m x 100m. For installations complying with UL268NFPA72 the maximum distance of Detector and Reflector from the ceiling must be 10 of the distance between floor and ceiling.Key FeaturesUp to 2 Detector Heads reporting to One Ground Level ControllerLong range prism kit extends range from 160ft 50m to 330ft 100mBuilt in Laser assisted prism mountingAuto-Alignment 2 to 4 minutes per headAutOptimise Auto-Correction due to building shiftBuilt-in electronic ULULCFM obscuration-acceptance fire testContamination compensationSeparate Trouble and Alarm relays for each of the 2 channelsPassword protected settingsLow current draw 5 to 8.5mABuilt-in 12M-20 conduit knock-outs on the system controllerProgrammable alarm thresholds 10 60 in 1 incrementsProgrammable Fault and Alarm delay 2-30 Seconds

GBP 1078.80
1