2.933 results (0,22802 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Faithfull Socket Polarity Tester with RCD Test Function FAIDETSOCRCD

Faithfull Socket Polarity Tester with RCD Test Function FAIDETSOCRCD

The Faithfull Socket Tester is an essential mains safety tester designed for testing socket wiring and RCDs. It will determine whether a socket is wired correctly or incorrectly. Used in conjunction with the coding table provided, the 5 combined indicators show the true status of the sockets wiring condition. It provides a true ground error indication through the LCD if dangerous contact voltage is present at the protective earth (PE). The use of 3 neon indicators for L-N-PE provides rapid detection of correct/incorrect socket wiring. It is equipped with an additional RCD tester for testing the operation of RCDs with a rating of not more than 30mA. Specification Socket Type UK 240V 3-Pin Nominal Voltage 220V & plusmn10% Frequency Range 5060Hz Measurement Category CATIII, 300V RCD Test Time 60300ms Contact Voltage Threshold & lt35 AC against ground depending on coupling to earth RCD Test Current 30mA & plusmn15% Dimensions 77 x 67 x 66mm Weight approx. 70g

GBP 21.99
1

Faithfull Battery Tester for AA, AAA, C, D & 9V FAIDETBAT

Faithfull Battery Tester for AA, AAA, C, D & 9V FAIDETBAT

This Faithfull Battery Tester is simple and easy-to-use on most types of standard domestic and rechargeable batteries. It helps to ensure the batteries are fully charged and ready for use. A simple analogue needle display indicates the power level of the batteries (good, low or replacement required). An adjustable arm allows the tester to accommodate the testing of D, C, AA, AAA, 9V 6F22 and 1.5V button cell batteries, and folds down for easy storage. Features Analogue needle indicator. Tests D, C, AA, AAA, 9V 6F22 batteries. Tests 1.5V button cell batteries. NOTE The tester is activated by the battery being checked. Keep test time as short as possible to avoid unnecessary battery drain.

GBP 7.59
1

Faithfull Voltage Detector Pen 50-1000V ac

Faithfull Voltage Detector Pen 50-1000V ac

This Faithfull Voltage Detector is a handy instrument that uses a safe, non-contact method to detect AC voltage in outlets, lighting fixtures, circuit breakers, wires and cables and can be used to find circuit breaks in a wire. A voltage test is easy to carry out by simply holding the detector by its body and placing the white end cap near or onto a cable or fitting believed to be carrying electricity. The detector tip will light up RED if a voltage is present. The tester can be used to detect voltage from 50 to 1,000 VAC. The tester is a convenient pen size with a fixing clip and easily fits into pockets ready for use. Features:LED detects the presence of AC current.Locate breaks in power cables and wires.Non contact testing for complete safety.Convenient pen size with a pocket clip.2 x 1.5V AAA Alkaline Batteries included. Specification:Voltage Detection: 50V-1,000V ACFrequency: 50-500HzMeasurement: CAT II, 1000VCategory: CAT III, 600V Warning:Always test on a known live circuit before use.This detector is not designed to carry out contact tests on live supplies. Any other form of test should be carried out by a qualified electrician.

GBP 8.99
1

Faithfull Zinc Plated Chain 4mm x 30m Reel - Max. Load 120kg FAICHAL430

Faithfull Zinc Plated Chain 4mm x 30m Reel - Max. Load 120kg FAICHAL430

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 45.99
1

Faithfull Zinc Plated Chain 5mm x 25m Reel - Max. Load 160kg FAICHAL525C

Faithfull Zinc Plated Chain 5mm x 25m Reel - Max. Load 160kg FAICHAL525C

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 59.99
1

Faithfull Zinc Plated Chain 6mm x 2.5m - Max. Load 250kg FAICHCUT60Z

Faithfull Zinc Plated Chain 6mm x 2.5m - Max. Load 250kg FAICHCUT60Z

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 8.49
1

Faithfull Zinc Plated Chain 2.5mm x 2.5m - Max. Load 50kg FAICHCUT25Z

Faithfull Zinc Plated Chain 2.5mm x 2.5m - Max. Load 50kg FAICHCUT25Z

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 7.99
1

Faithfull Zinc Plated Chain 8mm x 10m Reel - Max. Load 450kg FAICHAL810

Faithfull Zinc Plated Chain 8mm x 10m Reel - Max. Load 450kg FAICHAL810

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 61.99
1

Faithfull Zinc Plated Chain 3mm x 2.5m - Max. Load 80kg FAICHCUT30Z

Faithfull Zinc Plated Chain 3mm x 2.5m - Max. Load 80kg FAICHCUT30Z

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 5.09
1

Faithfull Zinc Plated Chain 6mm x 15m Reel - Max. Load 250kg FAICHAL615

Faithfull Zinc Plated Chain 6mm x 15m Reel - Max. Load 250kg FAICHAL615

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 45.99
1

Faithfull Zinc Plated Chain 4mm x 2.5m - Max. Load 120kg FAICHCUT40Z

Faithfull Zinc Plated Chain 4mm x 2.5m - Max. Load 120kg FAICHCUT40Z

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 5.99
1

Faithfull Zinc Plated Chain 5mm x 2.5m - Max. Load 160kg FAICHCUT50Z

Faithfull Zinc Plated Chain 5mm x 2.5m - Max. Load 160kg FAICHCUT50Z

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 10.49
1

Faithfull Zinc Plated Chain 3mm x 30m Reel - Max. Load 80kg FAICHAL330

Faithfull Zinc Plated Chain 3mm x 30m Reel - Max. Load 80kg FAICHAL330

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 34.99
1

Faithfull Zinc Plated Chain 2.5mm x 30m Reel - Max. Load 50kg FAICHAL230

Faithfull Zinc Plated Chain 2.5mm x 30m Reel - Max. Load 50kg FAICHAL230

These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.

GBP 29.99
1

Faithfull Spray Adhesive Non-Chlorinated 500ml FAISPRAYAD

Faithfull Spray Adhesive Non-Chlorinated 500ml FAISPRAYAD

A general purpose spray adhesive suitable for indoor and outdoor applications. Easy to use and an ideal substitute for double sided tape. Ideal for fixing floorings, upholstery, fabric, foam, polythene, foils, loose lay materials, cardboard and many other materials. Not suitable for use on vinyl or for mounting photographs. Test before use on new applications or unfamiliar materials to confirm suitability before use. Each 500ml can cover an area of 60 sq ft approximately (medium setting). Non-chlorinated and CFC free.

GBP 6.59
1

Faithfull Black Steel Jerry Can 20 Litre

Faithfull Black Steel Jerry Can 20 Litre

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 29.99
1

Faithfull Green Jerry Can - Metal 20 litre FAIAUJERRY20

Faithfull Green Jerry Can - Metal 20 litre FAIAUJERRY20

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 26.99
1

Faithfull Green Jerry Can - Metal 10 litre FAIAUJERRY10

Faithfull Green Jerry Can - Metal 10 litre FAIAUJERRY10

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 30.99
1

Faithfull Green Jerry Can - Metal 5 litre FAIAUJERRY5

Faithfull Green Jerry Can - Metal 5 litre FAIAUJERRY5

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 24.99
1

Faithfull Red Steel Jerry Can 20 Litre

Faithfull Red Steel Jerry Can 20 Litre

This Faithfull heavy-duty Jerry Can comes with a robust construction in carbon steel. Fuel retardant epoxy powder coated internally and externally for a long lasting, durable finish and to prevent corrosion. Fitted with a lockable cap, secure locking pin mechanism included. A gasket seal prevents leaks or evaporation. The cans are UN approved and certified and independently tested in the UK by a VCA approved test centre. They are rigorously tested undergoing, a drop test, stacking test and hydraulic and air pressure tests to measure their strength, integrity and suitability for use. The UN certification requirement is to UN standard Group II for transporting flammable liquids, but the cans surpassed this during testing and were approved to Group 1 which relates to transportation of dangerous liquids and chemicals. Each can is also embossed with a unique UN number for traceability. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). The Jerry cans comply with all the requirements of these legislation. Note This regulation limits the storage of fuel in a portable container to a maximum of 20 litres in metal containers or 10 litres in plastic containers. It is the users responsibility to ensure these regulations are fully observed and all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website. NOTE: these cans are not suitable for the storage of drinking water. The FAIAUNOZZLE is recommend for safe pouring of fuel.

GBP 29.99
1

Faithfull Multimeter LCD Display FAIDETMULTI

Faithfull Multimeter LCD Display FAIDETMULTI

This handy Faithfull Multimeter can be used for the measurement of DC / AC voltage, DC current and Resistance and for Diode and Transistor testing and Audible Continuity testing. This meter is ideal for performing many checks used in radio and electronic testing, car electrics, household appliances, portable tools and similar equipment. All test functions are easily accessible by rotating the 20-position range selector switch to the required function. The multimeter has many features to facilitate safe use including overload protection, recessed input terminals, automatic negative polarity and over-range indication. Additional features include a rubber protective housing with integral stand for easy visibility, a large 3 digit LCD backlit display with auto power off and low battery warning. Features: 20-position rotary function and range selector.Precision reading and stable performance.Recessed input terminals for added safety.Supplied with test leads, battery and instruction manual.Overload protection.Easy to read backlit display panel.Auto power-off.Low battery indication.Protective rubber housing with integral stand for easy visibility.9 volt 6F22 Alkaline Battery included. Specifications: Display: 3-digit LCD, Max reading 1999.Measuring method: Dual-slope integration A/D converter.Operating temperature: 0C - 40C (32F -104F).Dimensions: 138 x 69 x 31mm.Weight: approx. 170g (including battery).

GBP 23.99
1

Faithfull Mini Clamp Meter FAIDETCLAMP

Faithfull Mini Clamp Meter FAIDETCLAMP

The Faithfull Mini Clamp Meter is an ideal instrument for use in many laboratory, factory, warehouse and home applications. This compact electrical test tool combines a basic digital multimeter with a current sensor. The clamp can be used to measure current, and the probes are used to measure voltage. Features include a 3.1/2 digit LCD display and a data hold function that allows the present reading to be held on screen. Suitable for measuring AC/DC voltage, AC current, resistance and diodes. Supplied with batteries, test leads and user manual. Functions Voltage DC 300V, Input Impedance 9M Voltage AC 300V, Frequency Response 40400Hz Current AC 20/200/400A, Frequency Range 5060Hz Resistance 2000/200k Diode Check Resolution 1mV, Open Circuit Voltage about 3V Continuity Less than 30 Specification Clamp Capacity 25mm Max. Measurable Conduction 25mm Power 3 x 3V CR2032 batteries (supplied) Dimensions 151 x 65 x 34mm Weight approx. 125g (excluding battery)

GBP 23.99
1

Faithfull Spare Blade for FAITLRODSAW 150mm

Faithfull Spare Blade for FAITLRODSAW 150mm

This Faithfull 150mm Tungsten Carbide coated blade is designed for use in the Faithfull FAITLRODSAW Tile Rod Saw. The blade's shape allows cuts to be made in any direction, and it easily cuts straight lines, curves and shapes. Ideal for cutting hard glazed wall and floor tiles, but also suitable for cutting soft metal, plastic, brick and other similar materials. Fits many other tile saws with a 150mm (6in) blade with pin fixings. Length: 150mm.

GBP 5.99
1