ProfitSpring | B2B PPC Agency

Gent S4-FLUSH S-Quad Semi-Flush Mounting Kit

Gent S4-FLUSH S-Quad Semi-Flush Mounting Kit The S4-FLUSH is an S-Quad Semi-Flush Mounting Kit. This product is ideal for aesthetically sensitive areas.Key FeaturesIdeal For Use With The S-Quad Detector Range

GBP 36.95

1

Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the InterfaceThe 19104-52 is a DIN rail mounting polarised relay designed for use with the S4-34440-02 and S4-34440-12 interface units.Gent provides a range of relays to house applications involving switching and timers.They are manufactured from an all-purpose polycarbonate and are suitable for activating class changes and start work signals.

GBP 59.45

1

Gent ALD-302 Anti Ligature Base for the S-Quad Sensor Requires S4-700 Base

Gent ALD-302 Anti Ligature Base for the S-Quad Sensor Requires S4-700 BaseAnti-ligature base for the S-Quad Sensor Requires S4-700 baseThe S-Quad Anti Ligature Ceiling Mounted Base provides additional safety to occupants within secure facilities.The base has been designed with the entire S-Quad range and provides additional safety within buildings that accommodate people who are at risk.Approved for in-cell detection by the National Offender Management Service NOMS in England it now has an anti-tamper lip to prevent the storage of contraband between base detector.

GBP 216.56

1

Gent VID-EX IS Flashdome ATEX Approved Visual Indicating Device No EN54-23 Approval

Gent VID-EX IS FlashdomeATEX Approved Visual Indicating Device No EN54-23 ApprovalAn IS FlashdomeATEX Approved Visual Indicating Device.Key FeaturesNo EN54-23 approval

GBP 448.43

1

Gent NS-SPARE Spares Pack for Nano

Gent NS-SPARE Spares Pack for NanoThe NS-SPARE is a Spares Pack for the Nano Panel.

GBP 90.02

1

Gent 704952 Yellow Fascia for Key Switch MCP For Use With S4-34807

Gent 704952 Yellow Fascia for Key Switch MCP For Use With S4-34807The Gent 704952 is a Fascia designed for use with the Gent S4-34807 Vigilon Key-Switch Call Point.Key FeaturesComes in the colour yellowFlat designPlug-in connection terminalsOptional terminalTriple key function test open reset

GBP 36.61

1

Gent 2.8M Venturi Tube for Duct Housing S4-34760-28

Gent 2.8M Venturi Tube for Duct Housing S4-34760-28The S4-34760-28 from Gent is a 2.8 Venturi Tube for use with Duct Smoke Sensors.This product is designed for installation on a loop circuit of a Vigilon system. An optical smoke sensor specifically designed for use in ventilation ducting. A venturi probe samples the air in the duct for smoke. Detector housing is mounted externally to the duct. This device can trigger the shut-down of an air-conditioning or ventilation plant to prevent the spread of smoke.

GBP 203.83

1

Gent S4-34741-99 Light Shields for Beam Receiver Pack of 5

Gent S4-34741-99 Light Shields for Beam Receiver Pack of 5The S4-34741-99 is a pack of Light Shields for Beam Receivers.A light shield is only required to be fitted onto a beam receiver where direct sunlight or strong light is likely to fall in the path of the beam receiver. Where necessary fit the light shield.Gent by Honeywells S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.Powered and controlled via the loop the beam is a market leading device with features such as one-man alignment and commissioning which is achieved using the auto gain setting this ensure the optimum alignment is reached.Maintenance of the beam is enhanced with a key operated test feature which simulates the obscuration of the beam in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 17.Key FeaturesPack of 5Prevent strong light from interfering with beam receiver

GBP 105.31

1

Gent 704982 Yellow Surface Mount Back Box for Key Switch MCP For Use With S4-34807

Gent 704982 Yellow Surface Mount Back Box for Key Switch MCP For Use With S4-34807The 704982 is a Surface Mount Back Box designed for use with the Gent S4-34807 Vigilon Key-Switch Call Point.Key FeaturesComes in the colour yellowFlat designPlug-in connection terminalsOptional terminalTriple key function test open reset

GBP 21.16

1

Gent VS-PROLL Thermal Printer Roll for Gent Vigilon

VS-PROLL - Thermal Printer Roll for Gent VigilonThe VS-PROLL is a replacement printer paper roll for the Gent Vigilon range of fire alarm control panels. This part is also compatible with the Gent 3300 and Gent 3400 range of fire alarm control panels.Key FeaturesSize 47mm Diameter x 80mm Long

GBP 27.68

1

Gent Replacement PSU for VIG1-24 VS-PSU-24

Gent Replacement PSU for VIG1-24 VS-PSU-24The VS-PSU-24 is a replacement PSU for the VIG1-24 Vigilon fire panel.

GBP 2360.16

1

Gent Replacement PSU for VIG1-72 VS-PSU-72

Gent Replacement PSU for VIG1-72 VS-PSU-72The VS-PSU-72 is a replacement PSU power supply for the VIG1-72 Vigilon fire panel.

GBP 4581.89

1

Gent VIG-LPC Loop Card for Vigilon Panels Old Style

Gent VIG-LPC Loop Card for Vigilon Panels Old StyleThe Gent VIG-LPC is an additional replacement loop card for the legacy Gent Vigilon range of addressable control panels. This part is designed to be added to an existing panel to allow the connection of an additional loop circuit if the panel has spare capacity to add a further loop.

GBP 2037.43

1

Gent VS-PSU-RPL Backwards Compatible PSU for Old Style Vigilon Panels

Gent VS-PSU-RPL Backwards Compatible PSU for Old Style Vigilon PanelsThe Gent VS-PSU-RPL is a backwards compatible PSU which is used for the old style vigilon panels.

GBP 4490.17

1

Gent COMPACT-NODE Compact Plus Terminal Node for Vigilon Panel Networks

Gent COMPACT-NODE Compact Plus Terminal Node for Vigilon Panel Networks The Gent Compact Plus Terminal Node is designed for use with Vigilon Panel Networks.Key FeaturesSupplied in the colour BlackDesigned for use with Vigilon panel networks

GBP 2560.60

1

Gent NANO-FLUSH Flush Mounting Bezel for Nano-24

Gent NANO-FLUSH Flush Mounting Bezel for Nano-24The NANO-FLUSH from Gent is a Flush Mounting Bezel which has been designed for the Gent Nano-24 panel. The bezel will cover any imperfections in the wall when this has been cut to fit the panel.Key FeaturesFlush mounting bezelTo be used with the Gent Nano fire alarm panel

GBP 172.40

1

Gent 13270-29 Flush Plate for 1-8 Panel and Repeat Panel Variants

Gent 13270-29 Flush Plate for 1-8 Panel and Repeat Panel VariantsThe Gent 13270-29 is a flush mounting plate for the Gent Xenex fire alarm panel range. This product is ideal for giving a neat finish to a control panel that has been recessed into a wall.This part is compatible with the 1 2 4 and 8 zone Gent Xenex Panels along with the Gent Xenex repeater panel.Key FeaturesFlushing frame for Gent Xenex fire alarm panels and repeaterFits 2 4 or 8 zone panels

GBP 67.94

1

Gent VIGPLUS-MCC MCC Control Card for Vigilon Plus

Gent VIGPLUS-MCC MCC Control Card for Vigilon PlusThe VIGPLUS-MCC is a MCC Control Card designed for use with the VIGPLUS-24 VIGPLUS-72 EN54Key FeaturesComes with Micro SD flash memory card

GBP 573.26

1

Gent S4-34896 Anti-Tamper Enclosure for MCP - IP66

Gent S4-34896 Anti-Tamper Enclosure for MCP - IP66The Gent S4-34896 is a weatherproof call point enclosure for use with the new style Gent Vigilon addressable call points. This enclosure allows for the Gent Vigilon Call Points to be mounted in external locations.Key FeaturesAnti-tamperWeatherproofIP rating IP66For use with new style Vigilon addressable call points

GBP 150.32

1

Gent S2IP-SN-W3 Backwards Compatible Replacement for 34203 3 Way Sounder

Gent S2IP-SN-W3 Backwards Compatible Replacement for 34203 3 Way SounderTheS2IP-SN-W3 from Gent is a backwards compatible replacement for the 34203 3 Way Sounder.The S-Cubed range of alarm sounders incorporate sound speech and strobe effects all in one range of alarm devices. The range offers all variants in the choice of 2 colours red or white with either a shallow base version sealed to IP31 or a deep base version sealed to IP55. All the low profile sounders have the option of an integral strobe which is completely loop powered.With the introduction of voice enhanced sounders into the Vigilon range we now have the option of having an S-Cubed loop powered bell sound for the first time as well as standard speech messages.As an aid to commissioning there is the option to use the HandiLink Infrared remote control to turn on individual sounders and adjust the volume remotely. This means physical access is not required to make this adjustment and is only active during the commissioning process. Password access at the control panel is required to enable this feature so it is not possible to make this adjustment accidentally or maliciously.Key Features103 dBA output - 2 dBAIR control operating distance 3m4 voice phrases and bell tone available as standardOperating Voltage 10.8 - 28.8 V compatible with 12 or 24V systemsIP55 rated32 sounder tones availableSounder conforms to EN54 Pt.3

GBP 365.20

1

Gent S4-34891 Replacement Glass for S4-34800 Pack of 10

Gent S4-34891 Replacement Glass for S4-34800 Pack of 10The S4-34891 is a pack of replacement glass elements designed for the S4-34800.Key FeaturesPack of 10Dimensions 56mm x 50mm

GBP 40.76

1

Gent S2IP-SN-R3 Backwards Compatible Replacement for 34203 Red 3 Way Sounder

Gent S2IP-SN-R3 Backwards Compatible Replacement for 34203 Red 3 Way SounderTheS2IP-SN-R3 from Gent is a backwards compatible replacement for the 34203 3 Way Sounder.The S-Cubed range of alarm sounders incorporate sound speech and strobe effects all in one range of alarm devices. The range offers all variants in the choice of 2 colours red or white with either a shallow base version sealed to IP31 or a deep base version sealed to IP55. All the low profile sounders have the option of an integral strobe which is completely loop powered.With the introduction of voice enhanced sounders into the Vigilon range we now have the option of having an S-Cubed loop powered bell sound for the first time as well as standard speech messages.As an aid to commissioning there is the option to use the HandiLink Infrared remote control to turn on individual sounders and adjust the volume remotely. This means physical access is not required to make this adjustment and is only active during the commissioning process. Password access at the control panel is required to enable this feature so it is not possible to make this adjustment accidentally or maliciously.Key Features103 dBA output - 2 dBAIR control operating distance 3m4 voice phrases and bell tone available as standardOperating Voltage 10.8 - 28.8 V compatible with 12 or 24V systemsIP55 rated32 sounder tones availableSounder conforms to EN54 Pt.3

GBP 365.20

1

Gent XENS-SPARE Spares Pack for Xenex Panels

Gent XENS-SPARESpares Pack for Xenex PanelsThe XENS-SPARE Gent Xenex Fire Alarm Panel spares pack is ideal for spare components for the Gent Xenex range of conventional fire alarm panels.This pack includes detection circuit end of line capacitors including labels sounder circuit resistors a battery connection link shorting link mounting screws and fuses 250V 500mA T3.15AL F5ALKey FeaturesSpares PackDesigned for use with Gent Xenex Panels

GBP 75.59

1

Gent VS-ODOOR-PLUS Outer Door for VIGPLUS-24 amp VIGPLUS-72 Black

Gent VS-ODOOR-PLUS Outer Door for VIGPLUS-24 VIGPLUS-72 BlackThe VS-ODOOR-PLUS is an Outer Door for the VIGPLUS-24 and VIGPLUS-72.Key FeaturesSupplied in Black

GBP 336.31

1

Gent COMPACT-LPC Loop Card for Legacy Vigilon Compact

Gent COMPACT-LPC Loop Card for Legacy Vigilon CompactThe Gent COMPACT-LPC is a single loop card for use with the Gent Vigilon Compact fire alarm control panel only use with legacy panels such as V3 Systems. This loop card allows the addition of an additional loop circuit onto a Gent Vigilon Compact fire alarm panel or as a replacement for a faulty loop card.Please note The Gent Vigilon Compact Panel has a maximum capacity of 2 loop cards.Key Features2km loop lengthEN54 pt 23 compliant

GBP 1826.81

1

Brand

Merchant

Price (EUR)