ProfitSpring | B2B PPC Agency

Haes Auxiliary Fused Relay in Red BRF248A-R

Haes Auxiliary Fused Relay in Red BRF248A-RA range of 24v nominal change over relay switches. The coil is polarised and suppressed and may be used on monitored circuits. The relays are suitable for a variety of low voltage and mains control and signalling purposes. The relays also are available fused un-fused red or white.Key Features8 amp double pole relaySuitable for mains switchingIndividually fused outputs on fused versionRed LED to indicate relay activated

GBP 22.64

1

Haes SWK801-R 1 Pole OnOff - Key Out In Both Positions - 90 Degree Lock

Haes SWK801-R 1 Pole OnOff - Key Out In Both Positions- 90 Degree LockThe Haes SWK801-R is a 1-pole onoff switch featuring akey-operated mechanism with 90 degree lock.

GBP 12.88

1

Haes Lockdown Alert Alarm Relay

Haes Lockdown Alert Alarm RelayThe lockdown alert alarm relay has been developed to be used in conjunction with a fire control panel to provide a pulsing or continuous alert of the impending lockdown of a building but may be suitable for other key switch operated relay applications.Key FeaturesDeveloped to provide a pulsing or continuous alert of the impending lockdown of a buildingDesigned to be used in conjunction with the class change inputs of a fire control panelKey switch activationDouble pole 8A relayProgrammable ONOFF times in steps of 1 second up to 15 seconds

GBP 92.52

1

Haes Comms Card for Repeater amp Network Connections TPCA05

Haes Comms Card for Repeater Network Connections TPCA05The Haes comms card TPCA05 allows up to eight XLEN or XL32 control panels to be networked. Any combination of panel can be used from a 2 zone to a 32 zone and in any order to provide up to 256 conventional or Twin Wire zones. The card simply plugs in on top of the main circuit board in the control panel. In addition to the eight control panels up to eight repeater panels or remote display units can also be added to the network. The remote display units are supplied with a 4 x 40 character backlit LCD and will display all system fires and faults as well as controlling Silence Reset and other functions for the entire network.The networking has been designed to be wired in a fault tolerant fail safe loop configuration from comms A to B and back to the main panel again. If replacing an older system where the existing cabling cannot be configured in a loop as above it is possible to re-programme the master panel back to legacy RS485 circuit comms monitoring. This then allows any topology of comms cabling to be utilised. The cards are also provided with six programmable switch negative outputs which can be utilised for any local switching requirements.

GBP 126.86

1

Haes REBOX24-10 8A 24vdc Double Pole Boxed Relay

Haes REBOX24-10 8A 24vdc Double Pole Boxed Relay8 amp double pole changeover relay mounted in a IP55 ABS enclosure with Activated LED.Haes Boxed Relays come as 5 or 10Amp 24V relays mounted in an IP55 ABS enclosure with an activated LED on the front.Coils are polarised and supressed and rated up to 240V ac.Outputs are individually fused.Key Features24v 8A double pole relayContacts rated at up to 240v acActivated LEDIP55 enclosure

GBP 28.55

1

Haes REBOX24-5 5A 24vdc Double Pole Boxed Relay

Haes REBOX24-5 5A 24vdc Double Pole Boxed RelayA 5-amp double pole changeover relay mounted in a IP55 ABS enclosure with Activated LED.Haes Boxed Relays come as 5 or 10Amp 24V relays mounted in an IP55 ABS enclosure with an activated LED on the front.Coils are polarised and supressed and rated up to 240V ac.Outputs are individually fused.Key Features24v 5A double pole relayContacts rated at up to 240v acActivated LEDIP55 enclosure

GBP 31.20

1

Haes ESG-2007 Esprit Remote Abort Button - Metal Enclosure

Haes ESG-2007 Esprit Remote Abort Button - Metal EnclosureAn Espirit Remote Abort Button in a metal enclosure.Key FeaturesLarge red latching buttonTwist to release actionSingle gang steel enclosureSuitable for surface or flush fitting

GBP 76.34

1

Haes ESG-2006 Esprit Remote Hold Off Button - Metal Enclosure

Haes ESG-2006 Esprit Remote Hold Off Button - Metal EnclosureAn Esprit Remote Hold Off Button in a metal enclosure.Key FeaturesLarge green momentary action buttonSingle gang steel enclosureSuitable for surface or flush fitting

GBP 76.34

1

Haes ESG-2002 Esprit Mini Remote Status Unit

Haes ESG-2002 Esprit Mini Remote Status UnitThe Haes ESG-2002 mini status indicator provides LED only indication for automanual and release imminent with an automanual key switch. It is mounted in a compact single gang ABS enclosure.The Espirit Mini Remote Status Unit uses RS485 comms connections and up to 16 units can be connected on a system. If using the dual flood area control panel each remote status unit can be assigned to the specific flood area.Key FeaturesMounted in a compact single gang ABS enclosureRS485 comms connectionsCan connect up to 16 units

GBP 60.00

1

Haes 2-12 Zone Fully Functional or Passive Repeater Panel XLEN-R-12

Haes 2-12 Zone Fully Functional or Passive Repeater Panel XLEN-R-12The Excel-EN repeater panels have the same easy to use controls and indications as the main control panel but mounted in a smaller cabinet. The repeaters are fully functional with Silence Resound and Reset controls as well as Disable and Test Mode functions. It is also possible to disable the controls for each or all repeater panels to make them passive indication only. Excel-EN panels can support up to 8 repeater panels.Repeater panels are designed to be wired in a fault tolerant fail safe loop configuration from comms A to B and back to the main panel again. This enables repeater panels to still work if there is a break in the cables. If replacing an older system where the existing cabling cannot be configured in a loop as above it is possible to re-programme the panel back to legacy radial circuit comms monitoring. This then allows any topology of comms cabling to be utilised.The main circuit board has 2 switch ve inputs which can be used to sound or pulse the alarms. These inputs can also be re-programmed for use as PSU fault inputs. The internal comms PCB has 6 switch ve programmable outputs.Key Features12 zonal fire fault indications3 year warranty as standardSimple colour coded buttons for controlsIntegral 1 amp switch mode PSUClass change alert inputsProgrammable outputsTest mode disablement functionsFully functional or passiveSpace for up to 3.2Ah batteriesKey-switch or code entry for activation of controls

GBP 370.74

1

Haes Red Fire Alarm Mains Isolate Switch with Back Box - FAIS-R-B

Haes Red Fire Alarm Mains Isolate Switch with Back Box - FAIS-R-BThe Haes Fire Alarm Mains Isolate Switch is a purpose designed switch for the isolation of the mains supply to a fire alarm control panel in accordance with the requirements of BS5839 Pt 1 and BS EN60669.Key Features10 amp rated switchCan be surface or recess fittedLow profile lid 15mmFits std 15mm single gang back boxUses standard fish keyProtected by 5 amp fuse fitted as std up to 8 amp can be fittedPower indicator LEDAvailable in red or whiteTechnical SpecificationSwitch Contacts - Double pole 250v ac 10amps max continuous loadFuse - 5 x 20mm quick acting FH 250 VAC ceramic tubeEnclosure - ROHS compliant FR ABS 87W x 87H x 44D mm

GBP 20.11

1

Haes SZAOV-1001 Single Zone AOV Panel

Haes SZAOV-1001 Single Zone AOV PanelThe Haes SZAOV-1001 is a single detection zone smoke vent control panel with integral 3amp power supply designed to control 24vdc actuators or magnets.The panel has battery backup capability and assures that actuators can be powered in the event of a mains failure.Vent controls and indications are provided on the front of the control panel and integral control inputs to accept signals from remote contacts smoke detectors and manual controls.Key Features3 amp integral PSUEasy to programSingle detection zone Conventional or Twin-wireInput from other detection systems to activateMonitored Actuator output for controlling smoke ventsFireman switch input to override all other inputsAll inputs and actuator outputs monitored for Short and Open CircuitThermostat input - Ventilation mode. Vents openable in 10 stepsSpace for up to 7Ah batteries

GBP 348.30

1

Haes ESEN-2MAR-B MED Approved Esento 2 Zone Control Panel - Black

Haes ESEN-2MAR-B MED Approved Esento 2 Zone Control Panel - BlackA 2 zone marine approved fire alarm control panel available in grey and black. Esento Marine control panels are approved by MED Lloyds Register ABS for use in all seafaring vessels. The 2 zone includes muster alarm zone settings false alarm management mode and non latching zones. N.B. No networking or repeater panelsKey Features2 zonesActivate controls via key switch or code entryCompatible with Apollo Orbis Marine detectorsIntegral detector removal monitoringEarth fault monitoring1.25 Amp switch mode power supply Nom 27V DC2 monitored sounder outputs2 Aux CO relays 1 x Fire 1 x Fault. voltage freeClass change IPAlert IPFire fault switched -ve outputsFalse alarm modeMuster alarm featureTest mode with or without soundersDisable zones sounder OPs aux OPsAlarm load 800mA shared between all sounder outputsAll sounder circuits are fused 500mA with resettable fuses

GBP 318.82

1

Haes 1.5amp 24vdc EN54 Battery Charger Power Supply Up To 7Ah Batteries PSAS-15EN54

Haes 1.5amp 24vdc EN54 Battery Charger Power Supply Up To 7Ah Batteries PSAS-15EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 201.35

1

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-50EN54

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-50EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 373.62

1

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-30EN54

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-30EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 285.77

1

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 7AH Batteries PSAS-30EN54

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 7AH Batteries PSAS-30EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 238.13

1

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 38Ah Batteries PSAL-50EN54

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 38Ah Batteries PSAL-50EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 402.96

1

Haes WRA-RC-I00 WMSS EN54-23 W-Cat Red Flash Red Body Strobe

Haes WRA-RC-I00 WMSS EN54-23 W-Cat Red Flash Red Body StrobeW Class wall mount approved - this strobe would fit yourneed perfectly coming with red and white body colour options and white or redflash colour to suit your environment.Approved to EN54-23 EN54-17 it enables a completefully compliant and cost-effective fire alarm system by reducing installation andcommissioning costs through fewer wiring points.This solution enables easy system extensions in legacy andnew projects thereby providing the highest level of protection for allbuilding occupants from a trusted brand.Key FeaturesRed flashRed body

GBP 166.76

1

Haes WRL-RC-I00 WMST EN54-23 W-Cat Red Flash Red Body Strobe

Haes WRL-RC-I00 WMST EN54-23 W-Cat Red Flash Red Body StrobeW Class wall mount approved - this strobe would fit yourneed perfectly coming with red and white body colour options and white or redflash colour to suit your environment.Approved to EN54-23 EN54-17 it enables a completefully compliant and cost-effective fire alarm system by reducing installation andcommissioning costs through fewer wiring points.This solution enables easy system extensions in legacy andnew projects thereby providing the highest level of protection for allbuilding occupants from a trusted brand.Key FeaturesRed flashRed body

GBP 117.55

1

Haes CWSO-RR-S1 Red Low Profile Wall Ceiling Sounder

Haes CWSO-RR-S1 Red Low Profile Wall Ceiling SounderThe acoustic alarm signalling device is EN54-3 compliant in red housing and offers a selection of 32 signal tones including the DIN tone and other country-specific tones. All tones comply with EN 54-3. Configuration takes place via a 6-pin DIP switch. Up to two different signal tones may be activated. Signalling device with flat base suitable for wall and ceiling mounting.Key FeaturesEN 54-3 compliantSuitable for 12V and 24V DC service voltageSynchronous sound triggerVolume adjustable to 2 levels at the device

GBP 17.98

1

Haes TPCA05-VDR Voyage Data Recorder Card For Esento Marine Control Panels

Haes TPCA05-VDR Voyage Data Recorder Card For Esento Marine Control PanelsA simple plug-in card to connect data from the control panel to a ships Voyage Data Recorder.Suitable for the Haes Esento Marine range of marine approved control panelsSignal Output MessagesSystem NormalZonal Fire StatusZonal Faults open circuit short circuit detector removedSounder Circuit Faults open circuit short circuitDisablements zones sounders auxiliaries delaysTest Mode OperationClass Change Alert Status Input ActivationsPower Supply Faults charger battery voltage earth faultsMuster Alarm ActivitiesControl Button Activations resound silence resetRepeater FaultSystem Fault Conditions processor restartsStatus Restoral Messages for Fires FaultsSystem Status - repeated every 5 minutes

GBP 117.86

1

Haes MZAOV-1001A 3 amp AOV Control Panel - Single Zone Non Extendable

Haes MZAOV-1001A 3 amp AOV Control Panel - Single Zone Non ExtendableMZAOV-1001A is a single detection zone non extendable smoke vent control panel with integral 3 amp power supply designed to control 24vdc actuators or magnets.The panel has battery backup capability and assures that actuators can be powered in the event of a mains failure.Vent controls and indications are provided on the front of the control panel with a large graphical LCD display and integral control inputs to accept signals from remote contacts smoke detectors and manual controls.Optional support for Rain Sensor and PIR inputs for environmental control and trap injury protection plus 010v inputs and outputs to allow control interfacing with BMS systems and positional control Act output.The MZAOV control panel range has been developed to provide a comprehensive solution to smoke vent control scenarios.Key Features3 amp integral PSULarge graphical displayEasy to programSingle detection zone Conventional or Twin-wireInput from other detection systems to activateMonitored Actuator output for controlling smoke ventsSwitch input to control wide combination of ventsFireman switch input to override all other inputsAll inputs and actuator outputs monitored for Short and Open CircuitUser switch inputs configurable as local fireman switchesThermostat input - Ventilation mode. Vents openable in 10 stepsOptional support for Rain sensor PIR and BMS controlMonitoring of unused inputs and outputs can be disabled

GBP 545.29

1

Haes MZAOV-1002 MZAOV Control Panel 2 Zone Extendable 5A PSU

Haes MZAOV-1002 MZAOV Control Panel 2 Zone Extendable 5A PSUMZAOV-1002 is a two detection zone extendable to 4 smoke vent control panel with integral 5 amp power supply designed to control 24vdc actuators or magnets.The panel has battery backup capability and assures that actuators can be powered in the event of a mains failure.Vent controls and indications are provided on the front of the control panel with a large graphical LCD display and integral control inputs to accept signals from remote contacts smoke detectors and manual controls.Optional support for Rain Sensor and PIR inputs for environmental control and trap injury protection plus 010v inputs and outputs to allow control interfacing with BMS systems and positional control Act output.The MZAOV control panel range has been developed to provide a comprehensive solution to smoke vent control scenarios.Key Features5 amp integral PSULarge graphical displayEasy to programSwitch inputs to control wide combination of ventsFireman switch input to override all other inputsAll inputs and actuator outputs monitored for Short and Open CircuitUser switch inputs configurable as local fireman switchesThermostat input Ventilation mode. Vents openable in 10 stepsActuators configurable for independent operation or linked together as per required by 12101-9Optional support for Rain sensor PIR and BMS controlStaggered start of actuators to avoid the combined start-up currents from simultaneous actuator activationsMonitoring of unused inputs and outputs can be disabled

GBP 806.70

1

Haes 24vdc 2.5amp Transformer Rectifier Power Supply TRX2.5A-24

Haes 24vdc 2.5amp Transformer Rectifier Power Supply TRX2.5A-24The Haes 1A and 2.5A TRX transformer rectifier power supplies are suitable for applications requiring a simple regulated 24vdc supply where the charging of standby batteries is not required. Typical applications include door retaining magnets electromagnetic door closers or analogue system interface modules. The power supply units come complete with an integral load switching relay and are enclosed in a mild steel cabinet with a Supply On LED indicator and 20mm knockouts for cable entry.Key FeaturesHigh efficiency switched mode power suppliesCompact 1A and 2.5A versionsRegulated 24vdc supply3 year warranty as standardIntegral load switching relaySupply on indicationContinuously rated at design load see overMains input range 88-264vacOverload protected

GBP 74.25

1

Brand

Merchant

Price (EUR)