ProfitSpring | B2B PPC Agency

Hochiki Conventional Intrinsically Safe Heat Detector DCD-1E-IS

Hochiki DCD-1E-IS Conventional Intrinsically Safe Heat DetectorThe DCD-1E-IS is an Intrinsically Safe Conventional Rate of Rise Heat Detector with a 60 fixed temperature element designed for use in hazardous areas. The unit also features a remote indicator output.Key FeaturesTwin fire LEDs allow 360 degree viewingElectronics free mounting baseRemote indicator outputATEX Classification to II 1G EEx ia IIC T5 Tamb55CSuitable for installation in areas at Category 1 inc all lower categoriesAlso available in whiteApproved by LPCB and GLSIL2 Approved variant available

GBP 60.24

1

Hochiki Intrinsically Safe Weatherproof Call Point CCP-W-IS

Hochiki CCP-W-IS Intrinsically Safe Weatherproof Call PointInstallation efficiency flexibility and full compliance with the latest standards are at the heart of thenew CCP-W-IS outdoor Call Point range.Key FeaturesSealed to IP67Unique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsCPD Approval

GBP 192.41

1

Hochiki SOC-E-IS Conventional Intrinsically Safe Photoelectric Smoke Detector Ivory

Hochiki SOC-E-IS Conventional Intrinsically Safe Photoelectric Smoke Detector IvoryModel SOC-E-IS is a Photoelectric Smoke Detector designed for use in hazardous areas which also incorporates a remote indicator output and a removable chamber for easy maintenance.Each detector incorporates Hochikis unique High-Performance Chamber Technology removing the need to use Ionisation detectors in the majority of applications.The High-Performance Chamber has also enabled the detector threshold level to be increased thereby improving the signal to noise ratio and reducing susceptibility to false alarms.Key FeaturesTwin fire LEDs allow 360O viewingRemovable High Performance chamberSupported by a range of barriersRemote indicator outputATEX Classification to Ex ia IIC T5 Ga -20C Ta 55CSuitable for installation in areas at Category 1 inc all lower categoriesAlso available in whiteApproved by LPCB VdSSIL Level 2 capable.

GBP 81.68

1

Hochiki Intrinsically Safe Compatible Dual Zone Monitor with SCI CHQ-DZMSCI-IS

Hochiki CHQ-DZMSCI-IS Intrinsically Safe Compatible Dual Zone Monitor with SCIModel CHQ-DZMSCI-IS is Dual Zone Module which is fully compatible with Hochikis ESP analogue addressable protocol and I.S. equipment. It is supplied as an OEM version as illustrated which can be fitted within an IP67 rated enclosure. The unit is also available as a DIN Rail mountable module. Addressing is achieved via simple DIL switches.The device is designed to allow up to 40 20 per zone Conventional I.S. CDX Range detectors SLR-E-IS or DCD-1E-IS in the hazardous area to be interfaced to Hochikis ESP analogue addressable system within the safe area. The conventional zones on the CHQ-DZMSCI-IS do not support any line continuity options therefore if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesSingle loop addressRequires an auxiliary 24 V dc supplySupports two independent zones of Hochiki I.S. Conventional DetectorsBoth zones fully monitored for shortopen-circuitDIN rail version availableBoth models feature an integral short-circuit isolatorPlease note that this module should only be installed in the safe area

GBP 206.05

1

Hochiki Intrinsically Safe Dual Zone Monitor DIN Module with SCI CHQ-DZMDINSCI-IS

Hochiki CHQ-DZMDINSCI-IS Intrinsically Safe Dual Zone Monitor DIN Module with SCIModel CHQ-DZMDINSCI-IS is Dual Zone Module which is fully compatible with Hochikis ESP analogue addressable protocol and I.S. equipment. It is supplied as a DIN Rail mountable module a boxed version is also available. Addressing is achieved via simple DIL switches.The device is designed to allow up to 40 20 per zone Conventional I.S. CDX Range detectors SLR-E-IS or DCD-1E-IS in the hazardous area to be interfaced to Hochikis ESP analogue addressable system within the safe area.The conventional zones on the CHQ-DZMDINSCI-IS do not support any line continuity options therefore if Call Points are being interfaced they should be wired at the beginning of the zone.Key FeaturesSingle loop addressRequires an auxiliary 24 V dc supplySupports two independent zones of Hochiki I.S. Conventional DetectorsBoth zones fully monitored for shortopen-circuitBoxed module version also availableBoth models feature an integral short-circuit isolatorPlease note that this module should only be installed in the safe area.

GBP 238.94

1

Hochiki Intrinsically Safe Conventional Call Point CCP-E-IS

Hochiki CCP-E-IS Intrinsically Safe Conventional Call PointThe CCP-E-IS is a conventional call point based upon the industry standard KAC World Series housing and which can be used in hazardous areas.Key FeaturesSupports either a Frangible glass element or a Non Frangible plastic elementTerminals can accommodate up to a 2.5 mm solid conductorApproved to EN54 Part 12Rugged designATEX Classification to II 1G Eex ia IIC T4

GBP 127.80

1

Hochiki PS210 Flexi-Element for Manual Call Point Plain

Hochiki PS210 Flexi-Element for Manual Call Point PlainThe PS210 is a simple to fit Frangible Element which has been designed for KAC Call Points. It is a direct replacement for the manufacturers supplied glass.Key FeaturesCompatible with the new type KAC Call PointsEnables the call point to be reset after alarm is activatedYellow indicator on plastic element indicates to user that the call point has been activated

GBP 1.18

1

Hochiki SCPBACKBOX 50MM 50mm Deep Back Box for SCP-E

Hochiki SCPBACKBOX50MM 50mm Deep Back Box for SCP-E RedThe SCPBACKBOX50MM is a 50mm Deep Back Box designed for the SCP-E.Key FeaturesComes in the colour red

GBP 9.96

1

Hochiki Installation Kit for YBN-UA YBO-UAWHT YYA-A

Hochiki Installation Kit for YBN-UA YBO-UAWHT YYA-AThe YYA-A is a clamp kit designed for use with the YBN-UA Recess Mounting Adaptor which in turn is usedfor flush fitting the Hochiki range of sensorsdetectors into suspended ceilings.Key FeaturesFor use with YBN-UA Recess Mounting Adaptor

GBP 2.52

1

Hochiki Adaptor for New CHQ Modules CHQ-ADAPTOR

Hochiki CHQ-ADAPTOR Adaptor for New CHQ ModulesThe CHQ-ADAPTOR is designed to allow the Smart-Fix range of CHQ Modules to be housed in existing enclosures originally designed for the first generation CHQ-OEM Modules by modifying the footprint of the unit.Key FeaturesAllows the PCB component of a CHQ Module to be housed in an enclosureFootprint matches older enclosure sizes

GBP 3.71

1

Hochiki Wall Mounting Bracket for DRD-E YZU-B

Hochiki Wall Mounting Bracket for DRD-E YZU-BThe YZU-B is a fixed angle wall bracket designed specifically for use with the DRD-E Infra-Red Flame Detector where the detector cannot be fixed to a ceiling surface.Key FeaturesEasy to installColour-matched to CDX RangeRequires a mounting base for the DRD-E detector

GBP 45.12

1

Hochiki Shunt Diode Safety Barrier for IFD-EI.S Z728

Hochiki Shunt Diode Safety Barrier for IFD-EI.S Z728Model Z728 is an intrinsically safe zone-powered Zener-diode barrier for use in conventional fire detection systems for protection within hazardous areas.Each Zone contains two stages of pulse-tested Zener or forward- connected diodes and an infallible terminating resistor. In the event of an electrical fault in the safe area the diodes limit the voltage that can reach the hazardous area and the resistor limits the current. A fuse protects the diodes and the two stages of voltage limitation ensure continued safety if either stage should fail. No active output-current limiting circuits are employed.The unit is certified ia for all zones and IIC for all explosive atmospheres.PLEASE NOTE The Earth connections to the unit are made via connection to the DIN rail this product MUST be earthed.Key FeaturesSimple installation onto standard DIN railingRemovable colour-coded terminals for easy connection accommodate conductors up to 2.5 mmInput circuitry protected against reverse polarityCan be used with the IFD-EIS industrial IR3 flame detector

GBP 113.99

1

Hochiki YBV-R4WHT Mounting Base for SCI Sensors - White

Hochiki YBV-R4WHT Mounting Base for SCI Sensors - WhiteThe YBV-R4WHT is an SCI Sensor Mounting Base which is fully compatible with Hochikis ESP range of SCI sensors. It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving a remote LED if required.Please note This base does not provide short-circuit isolation on its own but allows the SCI sensor range to operate with SCI functionality.Key FeaturesElectronics freeStainless steel contactsTakes 2.5mm2 cablesSlim profile - only 8 mmRugged wiring contactsFacility for remote indicatorQuick connection via square cable clampsFourth terminal allows for SCI functionality of sensorsColour White

GBP 4.36

1

Hochiki Z7728 Shunt Diode Safety Barrier for IFD-EIS

Hochiki Z7728 Shunt Diode Safety Barrier for IFD-EISModel Z7728 is an intrinsically safe zone-powered shunt diode barrier for use in conventional fire detection systems for protection within hazardous areas.Key FeaturesDesigned for use with the IFD-EIS Infrared Intrinsically Safe Flame DetectorSimple Installation

GBP 118.48

1

Hochiki Ekho EK-BOX-02 Back Box for EK-WL8-IN

Hochiki Ekho EK-BOX-02 Back Box for EK-WL8-INThe EK-BOX-02 is an optional deeper back box which has been designed for use with the Ekho Input Module EK-WL8-IN.Key FeaturesComes with one 20mm cable gland entryEasy to fit

GBP 34.98

1

Hochiki Ekho EK-BBOX-01 Back Box for EK-WL8-TRHEXPOUT

Hochiki Ekho EK-BBOX-01 Back Box for EK-WL8-TRHEXPOUTThe EK-BBOX-01 is an optional deeper back box which has been designed for the Ekho range of rectangular modules TRH EXP and OUT.Key FeaturesComes with two 20mm cable glandsEasy to fit

GBP 25.84

1

Hochiki SMB-1LID Lid for Enclosure Grey

Hochiki SMB-1LID Lid for Enclosure GreyAn alternative lid for the SMB-1 enclosure moulded in grey ABS - can replace the semi-transparent grey lid supplied as standard.Key FeaturesOpaque grey ABSAlternative to standard semi-transparent lid

GBP 12.23

1

Hochiki IP65MetalBoxBLK IP65 Metal Box for N68N89 Black

Hochiki IP65MetalBoxBLK IP65 Metal Box for N68N89 BlackAn IP65 rated metal box designed for use with the N68 and N89.Key FeaturesColour Black

GBP 172.02

1

Hochiki SMB-3LID Lid for Small DIN Mounting Box Grey

Hochiki SMB-3LID Lid for Small DIN Mounting Box GreyAn alternative lid for the SMB-3 enclosure moulded in grey ABS - can replace the semi-transparent grey lid supplied as standard.Key FeaturesOpaque grey ABSAlternative to standard semi-transparent lid

GBP 18.44

1

Hochiki SMB-2LID Lid for Large DIN Mounting Box Grey

Hochiki SMB-2LID Lid for Large DIN Mounting Box GreyAn alternative lid for the SMB-2 enclosure moulded in grey ABS - can replace the semi-transparent grey lid supplied as standard.Key FeaturesOpaque grey ABSAlternative to standard semi-transparent lid

GBP 28.55

1

Hochiki CSCAP Lockable Cap for CSB-E and CSBB-E

Hochiki CSCAP Lockable Cap for CSB-E and CSBB-EA Lockable Cap for use with the CSB-E and CSBB-E.

GBP 9.65

1

Hochiki Hinged Cover for Call Point - HINGED COVER PS200

Hochiki Hinged Cover for Call Point - HINGED COVER PS200An acrylic hinged cover for the HCP-ESCI manual call point range which protects against accidental operationvandalismKey FeaturesEasy to fitProtects against accidentalactivation

GBP 4.70

1

Hochiki Protection Cage for LEAKalarm Floor Probe LA-WLDP-C

Hochiki Protection Cage for LEAKalarm Floor Probe LA-WLDP-CA wire cage designed to protect the LEAKalarm Floor Probe LA-WLDP when in-situ.Key FeaturesEasy to installRobust design

GBP 33.36

1

Hochiki FL-DF1 Dust Filter for FIRELINK 400

Hochiki FL-DF1 Dust Filter for FIRELINK 400Dust Filter for FIRELINK 400

GBP 39.36

1

Hochiki FL-DF2 Dust Filter for FIRELINK 25100

Hochiki FL-DF2 Dust Filter for FIRELINK 25100Dust Filter for FIRELINK 25100

GBP 27.59

1

Brand

Merchant

Price (EUR)