410 results (0,15286 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Kentec RIM100E-K Ethernet Link Module For Fire And Fault Reporting

Kentec RIM100E-K Ethernet Link Module For Fire And Fault Reporting

Kentec RIM100E-K Ethernet Link Module For Fire And Fault ReportingThe RIM100E-K provides a protocol independent Ethernet communication channel. The module supports TCP Server TCP Client UDP and UDP Server Ethernet protocols. The RIM100E-K is designed to provide a selectable RS485RS232 interface to Ethernet. The module supports airing of modules to introduce a transparent data link which can be set to monitor the link and indicate loss of the link via an output relay.The module is housed in a DIN rail mountable enclosure with LED status indication visible on the front fascia of the module. The equipment is designed to include an activity heartbeat signal for monitoring by any third-party application to which it is interfaced.The RIM100E-K is approved for use with the IVIEW fire system monitoring application tool.Key FeaturesInstalled in conjunction with the RIM100M-3-K they work together as a pair to provide bidirectional monitoring of fire and fault relays across an Ethernet linkOnce fitted the module is transparent to the userProvides a simple LAN communication channel easy to install and debugRouting of data between RS232RS485 is selectable and configured using a simple USB interfaceProduct is DIN rail mountableSerial port baud rates supported range from 300bps to 1024Kbpsstatus on data activityFront fascia LEDs system status indicationThe RIM100E-K has a built-in web page for configuring the deviceAn RJ45 status indicator light is used to provide Wireless Connectivity for remote monitoring using a Bluetooth or WiFi communication connectionDiagnostic information available via a USB interface support for Auto-MIDX function discretionary connect cross-over or direct network cable automatic switching

GBP 1022.52
1

Kentec Line Continuity Monitoring Unit K14060

Kentec Line Continuity Monitoring Unit K14060

Kentec LCMU Line Continuity Monitoring Unit K14060To use this method of monitoring the breaking connection of the detector base must be fitted with a diode. To ensure correct operation over a wide supply voltage range and with up to 20 detectors removed a Schottky type BYV-1060 is recommended. These devices are however very sensitive to electrostatic discharge and extra care should be taken when handling or cable testing. It is also necessary to fit a 47uF capacitor to the detection line terminals on some of the control panels not K3000 series or Sigma CP.Extreme care should be taken when fitting the capacitor in the panel as they are polarity conscious. The LCMU itself is also polarity conscious and the polarity is indicated in the normal manner i.e. black wire is always negative. A wrongly connected LCMU will produce a short circuit fault condition. Due to the use of surface mount technology components the LCMU is probably the smallest device of its kind on the market. This enables the device to be fitted either within the last device on a zone or in the back box eliminating the need for an additional wiring point.Key FeaturesEasy to installNo additional wiring pointLow costSub-miniature designEnvironmentally sealed

GBP 8.56
1

Kentec RIM100M-3-K InputOutput Module For RIM100-E Ethernet LinkTwo Inputs To Monitor

Kentec RIM100M-3-K InputOutput Module For RIM100-E Ethernet LinkTwo Inputs To Monitor

Kentec RIM100M-3-K InputOutput Module For RIM100-E Ethernet LinkTwo Inputs To MonitorThe RIM100M-3-K provides a bi-directional InputOutput interface for relaying system states to RIM100E-K Ethernet modules. The RIM100M-3-K links to the RIM100E-K modules via an RS485 interface. The RIM100M-3-K supports two signal inputs and three relay outputs.The two inputs can typically be used to transfer the status of Fire and Fault states from a fire panel across a monitored link between twoRIM100E-K modules. All relay outputs are driven by signal states presented by the RIM100E-K module.The RIM100M-3-K activates an external relay contact based on the state of the monitored communication link between local and remote paired RIM100E-K modules.The module is housed in a DIN rail mountable enclosure with LED status indication visible on the front fascia of the module.Key FeaturesTwo bi-directional InputOutput signal states communicated across a link with RIM100E-K modulesSupports a simple monitored communication channel with configurable latencyAn effective solution for introducing a remote conventional Fire Alarm Control Panel to an existing network via a monitored communication channelSupport for debug via laptop with simple USB interfaceProduct is DIN rail mountableSimple LED system status indication for fire fault and monitored link

GBP 1022.52
1

Kentec K8140-40 10.25Amp PSU Standard Cabinet Grey Space for 18Ah batteries 369mm x 481mm x 110mm

Kentec K8140-40 10.25Amp PSU Standard Cabinet Grey Space for 18Ah batteries 369mm x 481mm x 110mm

Kentec K8140-40 10.25Amp PSU Standard Cabinet Grey Space for 18Ah batteries 369mm x 481mm x 110mmThe K1840 K1841 are UL listed universal input switching power supplies capable of delivering a full 192W of continuous power for fire alarm systems.Suitable for charging a range of sealed lead acid batteries from 7Ah to 40Ah the K8140 K8141 power supplies feature complete monitoring of primary secondary power sources. Incorporates fully temperature compensated battery charging and battery high impedance monitoring.Key FeaturesContinuous 8A load output while charging fully depleted batteriesCharges up to 40Ah batteriesListed to UL 1481 864120V to 240V AC inputAC fail monitoring with LED indication and outputBattery disconnection monitoring with LED indication and outputLow battery monitoring with LED indication and output

GBP 724.44
1

Kentec K8140-40 10.25Amp PSU Standard Cabinet Grey Space for 18Ah batteries 369mm x 481mm x 110mm

Kentec K8140-40 10.25Amp PSU Standard Cabinet Grey Space for 18Ah batteries 369mm x 481mm x 110mm

Kentec K8140-40 10.25Amp PSU Standard Cabinet Grey Space for 18Ah batteries 369mm x 481mm x 110mmThe K1840 K1841 are UL listed universal input switching power supplies capable of delivering a full 192W of continuous power for fire alarm systems.Suitable for charging a range of sealed lead acid batteries from 7Ah to 40Ah the K8140 K8141 power supplies feature complete monitoring of primary secondary power sources. Incorporates fully temperature compensated battery charging and battery high impedance monitoring.Key FeaturesContinuous 8A load output while charging fully depleted batteriesCharges up to 40Ah batteriesListed to UL 1481 864120V to 240V AC inputAC fail monitoring with LED indication and outputBattery disconnection monitoring with LED indication and outputLow battery monitoring with LED indication and output

GBP 810.01
1

Kentec K8141-40 10.25Amp PSU Deep Cabinet Red Space for 40Ah Batteries 369mm x 481mm x 199mm

Kentec K8141-40 10.25Amp PSU Deep Cabinet Red Space for 40Ah Batteries 369mm x 481mm x 199mm

KentecK8141-4010.25Amp PSU Deep Cabinet Red Space for 40Ah Batteries 369mm x 481mm x 199mmThe K1840 K1841 are UL listed universal input switching power supplies capable of delivering a full 192W of continuous power for fire alarm systems.Suitable for charging a range of sealed lead acid batteries from 7Ah to 40Ah the K8140 K8141 power supplies feature complete monitoring of primary secondary power sources. Incorporates fully temperature compensated battery charging and battery high impedance monitoring.Key FeaturesContinuous 8A load output while charging fully depleted batteriesCharges up to 40Ah batteriesListed to UL 1481 864120V to 240V AC inputAC fail monitoring with LED indication and outputBattery disconnection monitoring with LED indication and outputLow battery monitoring with LED indication and output

GBP 810.01
1

Kentec K41700SWP Disabled Toilet Alarm Kit

Kentec K41700SWP Disabled Toilet Alarm Kit

Kentec K41700SWP Disabled Toilet Alarm KitThe Safe-Point Toilet Alarm Kit is simple to install and provides peace of mind wherever an indication of assistance required is called for. Meeting the required standards for all disabled toilets fitted with emergency toilet alarm.Upon raising an alarm the reset unit responds with a reassuring audible sound which confirms assistance is on the way. In addition the unit has Braille text.The units are supplied in white PVC enclosures to fit discreetly into any decor or environment.Key FeaturesOnly 3 points to install on a standard system and can be simply linked or expanded to other systemsSounder within the reset unit to give audible reassurance help is on the wayKits supplied with twin pull cord ringsBraille text on the reset unit as well as disabled persons stickerMulti-way remote indicator units availableAssist in compliance with the Equality Act 2010 other care standardsSuitable for commercial and public buildingsThe Kit Includes1x Power SupplyOverdoor Indicator Unit1x Reset plate1x Pull cord

GBP 229.14
1

Kentec DNX-A-2R-K RS485 Dynamic Network Analyser

Kentec DNX-A-2R-K RS485 Dynamic Network Analyser

Kentec DNX-A-2R-K RS485 Dynamic Network AnalyserThe DNX-A-2R-K is an RS485 Dynamic Network Analyser for Ring Topology Networks. This product has been developed to facilitate dynamic network management through the provision of an independent communication layer.The equipment is designed to improve the Quality of Service QoS of critical communication networks while operating under the performance criteria required by EN54-13 and BS5839 part 1.The ports connected to the communications ring are correctly terminated to match the network communications cable impedance to ensure optimum signal quality and amplitude.Signal quality is constantly monitored and the termination impedance is adjusted to compensate for changes in cable impedance due to climatic or physical cable parameter changes.Four InputOutput interfaces are provided for through an independent communications layer. This feature provides a basic redundant network protocol with the mapping configuration managed through the PC graphics IVIEW programming tool.An upgrade license DNX-R-2R-K-UG is available for this module which enables compatibility with IVIEW graphical software for network analysis support.Key FeaturesIndependent reporting with Class A communication redundancy with multiple fault tolerance2.5 kV galvanic isolation on all portsDual and single industrial equipment RS485 connection4 independent IO channels across the redundant network ring for independent protocol redundancyCan operate on Hosted Fibre Ethernet linksSimple LED system status indicationSignal quality and amplitude visual indicationWireless connectivity for remote monitoring using a Bluetooth or WiFi interfaceSupports the generation of system performance reports for Installation commissioningVisual interface provide by IVIEW the graphical user interface with monitoring diagnostics and reporting optionsEnables preventative maintenance management through system degradation monitoringConfiguration and commissioning parameters are stored allowing for system performance tracking over timeBaud rate selectable from 9600-115200 bitssecDIN rail mounting

GBP 1591.74
1

Kentec K41700FST Disabled Toilet Alarm Kit

Kentec K41700FST Disabled Toilet Alarm Kit

Kentec K41700FST Disabled Toilet Alarm KitThe K41700FST is a Disabled Toilet Alarm Kit which comes in Stainless Steel and is Flush Mounted.The Safe-Point Toilet Alarm Kit is simple to install and provides peace of mind wherever an indication of assistance required is called for.Meeting the required standards for all disabled toilets fitted with emergency toilet alarm. Upon raising an alarm the reset unit responds with a reassuring audible sound which confirms assistance is on the way. In addition the unit has Braille text.The units are supplied in white PVC enclosures to fit discreetly into any decor or environment.Key FeaturesOnly 3 points to install on a standard system and can be simply linked or expanded to other systemsSounder within the reset unit to give audible reassurance help is on the wayKits supplied with twin pull cord ringsBraille text on the reset unit as well as disabled persons stickerMulti-way remote indicator units availableAssist in compliance with the Equality Act 2010 other care standardsSuitable for commercial and public buildingsThe Kit Includes1x Power SupplyOverdoor Indicator Unit1x Reset plate1x Pull cord

GBP 229.14
1