345 results (0,18763 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

M18 Fuel Packout Wet/ Dry Vacuum

M18 Fuel Packout Wet/ Dry Vacuum

M18 Fuel Packout Wet/ Dry Vacuum Flexible battery system: works with all MILWAUKEE M18 batteriesExtendable hose up to 1.6 m for extended reach and versatilityPACKOUT compatibility gives this cordless wet/ dry vac outstanding mobility saving the time spent hauling tools on and off the jobsiteDelivers up to 30 minutes of run time on a HIGH OUTPUT 8.0 Ah battery pack in high mode and over 50 minutes in low modeThe highly efficient HEPA filter collects 99.97 % of airborne particles down to 0.3 micronsThe DEK 26 power tool connector allows for efficient dust extraction from power toolsInternal accessory and hose storage allows all attachments to be carried with the tool avoiding loss of equipmentUsable on and off the PACKOUT stack makes this wet/ dry cleanup solution most portable and versatileThe M18 FUEL PACKOUT wet/ dry vacuum is fully compatible with the MILWAUKEE PACKOUT Modular Storage SystemPOWERSTATE brushless motor delivers powerful performance to easily clean up common wet and dry jobsite debris

GBP 315.00
1

M18 Wet/Dry Vacuum

M18 Wet/Dry Vacuum

M18 Wet/Dry Vacuum Flexible battery system: works with all MILWAUKEE M18 batteriesUp to 30 minutes run time with M18 9.0 Ah battery packStackable tool box design for added portability and easier storageDEK 26 compatible allows the vacuum to be easily connected to a powertool Waterproof switch prevents switch damage over the life time of the toolOn board blower for moving debris away from the work areaInternal accessory and hose storage allows all attachments to be carried with the tool avoiding loss of equipmentPowerful 18 V motor with a maximum air flow of 1300  l/min / 80  bar provides excellent suction power for both wet and dry clean up applicationsHEPA filter will collect 99.97% of airborne particles down to 0.03 microns for fine dust collection

GBP 133.00
1

M12 Fuel Wet/ Dry Vacuum Bare Unit

M12 Fuel Wet/ Dry Vacuum Bare Unit

M12 Fuel Wet/ Dry Vacuum Bare Unit Flexible battery system: works with all MILWAUKEE M12 batteriesREDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under loadThe highly efficient HEPA filter collects 99.97 % of airborne particles down to 0.3 micronsStackable tool box design for added portability and easier storageThe DEK 26 power tool connector allows for efficient dust extraction from power toolsOn board blower for moving debris away from the work areaWall mount hanging plate included for increased storage optionsInternal accessory and hose storage allows all attachments to be carried with the tool avoiding loss of equipmentPowerful M12 FUEL motor with a maximum air flow of 1275 l/min & 105 mbar provides 18V performance for both wet and dry clean up applicationsWith a 6.0 Ah battery the vacuum provides 14 minutes of run time on high and 26 minutes on the low setting this compact vacuum is ideal for spot and service focused wet/ dry quick clean up needs

GBP 210.00
1

Sawzall Blade TCT TORCH NITRUS 230x7-1pc

Sawzall Blade TCT TORCH NITRUS 230x7-1pc

Sawzall Blade TCT TORCH NITRUS 230x7-1pc Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thiThis special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades. Best performance in all thick metals and especially cast iron soil waste and drainage pipes 25 mm blade height for improved stability and minimum vibration.The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.Thick 1.27 mm robust blade body for precise straight cuts.

GBP 45.00
1

Sawzall Blade TCT TORCH NITRUS 150x7-1pc

Sawzall Blade TCT TORCH NITRUS 150x7-1pc

Sawzall Blade TCT TORCH NITRUS 150x7-1pc Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thiThis special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades. Best performance in all thick metals and especially cast iron soil waste and drainage pipes 25 mm blade height for improved stability and minimum vibration.The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.Thick 1.27 mm robust blade body for precise straight cuts.

GBP 36.00
1

INKZALL marker

INKZALL marker

INKZALL marker Acrylic nib ideal for rough surfaces such as OSB and concrete.Lanyard hole e.g. to attach the INKZALL highlighters to the belt.Easy open cap for one hand operation.Marker continues to write after 72+ hours of cap off time.Quick dry time – reduced smearing markings on PVC metal surfaces.Can be used on wet oily dusty rusty with debris surfaces.Helmet clip – can be clipped to the construction site cap trousers overalls.Thin body for use in restricted areas.For use on concrete wood metal plywood OSB plastic.Stays sharp doesn't mushroom or push back under pressure.

GBP 3.70
1

INKZALL marker

INKZALL marker

INKZALL marker Acrylic nib ideal for rough surfaces such as OSB and concrete.Lanyard hole e.g. to attach the INKZALL highlighters to the belt.Easy open cap for one hand operation.Marker continues to write after 72+ hours of cap off time.Quick dry time – reduced smearing markings on PVC metal surfaces.Can be used on wet oily dusty rusty with debris surfaces.Helmet clip – can be clipped to the construction site cap trousers overalls.For use on concrete wood metal plywood OSB plastic.Thin body for use in restricted areas.Stays sharp doesn't mushroom or push back under pressure.

GBP 3.59
1

INKZALL MARKER BLUE 1PC

INKZALL MARKER BLUE 1PC

INKZALL MARKER BLUE 1PC Acrylic nib ideal for rough surfaces such as OSB and concrete.Lanyard hole e.g. to attach the INKZALL highlighters to the belt.Easy open cap for one hand operation.Marker continues to write after 72+ hours of cap off time.Quick dry time – reduced smearing markings on PVC metal surfaces.Can be used on wet oily dusty rusty with debris surfaces.Helmet clip – can be clipped to the construction site cap trousers overalls.For use on concrete wood metal plywood OSB plastic.Thin body for use in restricted areas.Stays sharp doesn't mushroom or push back under pressure.

GBP 4.79
1

Rubber Sleeve for M18 FMTIWP

Rubber Sleeve for M18 FMTIWP

Rubber Sleeve for M18 FMTIWP Flexible material allows for easy install and removal.Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.Use on any other product than advised may result in damage to tool motor and may void tool warranty.Not for use on or near live electrical circuits. Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

GBP 73.00
1

Rubber sleeve for M12 FIR38LR

Rubber sleeve for M12 FIR38LR

Rubber sleeve for M12 FIR38LR Flexible material allows for easy install and removal.Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.Use on any other product than advised may result in damage to tool motor and may void tool warranty.Not for use on or near live electrical circuits.Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

GBP 28.00
1

M12 Stand Light Bare Unit

M12 Stand Light Bare Unit

M12 Stand Light Bare Unit Compact footprint with low center of gravity and impact resistant reinforced nylon legs to protect against abusive jobsite conditionsExtendable mast which reaches from 0.91 m to over 1.72 m to light up work spacesLow battery indicator - light flashes when battery pack is lowHead can be rotated 210° vertically and pivoted 270° horizontally to have the best perfect workplace illuminationImpact resistant adjustable head with highly durable polycarbonate lens to withstand drops up to 3 mProtective guard secures the head and lens when the light is collapsed for storage or transport12 high performance LEDs provide 1400 lumens on high light outputTRUEVIEW™ high definition lightingCarry handles on 2 positions for easy one handed transport: weight is evenly balanced when compressed

GBP 176.00
1

M18 115mm Angle Grinder With Paddle Switch

M18 115mm Angle Grinder With Paddle Switch

M18 115mm Angle Grinder With Paddle Switch Burst resistant and tool-free safety guard for best user protection and fast adjustmentNon-lockable switch for best user protection and preventing automatic start upREDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack lifeFuel gauge displays remaining charge Individual battery cell monitoring optimises tool run time and ensures long term pack durability Reduced height of gear box and slim girth design deliver optimum ergonomicsFull metal gear case delivers heavy duty durabilityFlexible battery system: works with all MILWAUKEE® M18™ batteriesREDLINK™ overload protection electronics in tool and battery pack deliver best in class system durabilityHigh performance 4-pole motor delivers maximum power whilst (optimising) maximising the power to weight ratioMulti position side handle for ease of use

GBP 515.00
1

Rubber sleeve for M12 FHIR14 & M12 FHIR38

Rubber sleeve for M12 FHIR14 & M12 FHIR38

Rubber sleeve for M12 FHIR14 & M12 FHIR38 Flexible material allows for easy install and removal.Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.Use on any other product than advised may result in damage to tool motor and may void tool warranty.Not for use on or near live electrical circuits.Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

GBP 28.00
1

Rubber sleeve for M12 FRAIWF38 & M12 FRAIWF12

Rubber sleeve for M12 FRAIWF38 & M12 FRAIWF12

Rubber sleeve for M12 FRAIWF38 & M12 FRAIWF12 Flexible material allows for easy install and removal.Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.Use on any other product than advised may result in damage to tool motor and may void tool warranty.Not for use on or near live electrical circuits. Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

GBP 28.99
1

Rubber Sleeve for M18 FMTIW2F & M18 FMTIW2P

Rubber Sleeve for M18 FMTIW2F & M18 FMTIW2P

Rubber Sleeve for M18 FMTIW2F & M18 FMTIW2P Flexible material allows for easy install and removal.Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.Use on any other product than advised may result in damage to tool motor and may void tool warranty.Not for use on or near live electrical circuits. Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

GBP 43.00
1