ProfitSpring | B2B PPC Agency

21-L-050F Imperial Pilot Bore Timing Pulley, 21 Teeth, 3/8" Pitch, for A 1/2" Wide Belt

Imperial timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 0.00

1

21-L-100F Imperial Taper Bore (1108) Timing Pulley, 21 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 0.00

1

19-L-100F Imperial Taper Bore (1108) Timing Pulley, 19 Teeth, 3/8" Pitch, for A 1" Wide Belt

Dunlop timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 0.00

1

25-L-075F Imperial Taper Bore (1108) Timing Pulley, 18 Teeth, 3/8" Pitch, for A 1/2" Wide Belt

Dunlop timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 0.00

1

22-L-075F Imperial Taper Bore (1108) Timing Pulley, 18 Teeth, 3/8" Pitch, for A 1/2" Wide Belt

Dunlop timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 0.00

1

19-L-075F Imperial Taper Bore (1108) Timing Pulley, 18 Teeth, 3/8" Pitch, for A 1/2" Wide Belt

Dunlop timing pulleys have equally spaced grooves machined in to the outside diameter, to give correct meshing with the belts teeth, The pulley grooves are of special design to give this correct meshing of the belt teeth with minimal friction. All pulleys manufactured have correct minimum meshing tolerances built in and the pitch diameter is always larger then the outside diameter.

GBP 0.00

1

1615-25 Metric Taper Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 0.00

1

2517-42 Metric Taper Bore Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 0.00

1

1210-18 Metric Taper Bore Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 0.00

1

1210-14 Metric Taper Bore Bush

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws. Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

GBP 0.00

1

L050I Spider Elements

Elements These couplings offer a range of hub and element sizes to provide low cost, general use flexible couplings. These will cater for some minor misalignment and help absorb shock loading. All hubs are supplied pilot bored.

GBP 0.00

1

Medway 4SR13/25BK 25MM 08B-1 Pre Bored Simplex Sprockets with Key Way & 2 Grub Screws

Pre-bored sprockets are manufactured to internationally recognised standards DIN8187-ISO/R 606 and are produced from C45 steel UNI EN 10083-1 having a minimum strength of 600 N/mm 2. They have induction hardened teeth to reduce tooth wear so extending the sprockets working life. Convenient metric bore sizes with a corresponding key way that is located on the centre line of a tooth, 2 grub screws at 90 to each other for securing to a shaft. Available to suit British standard roller chains 08B-1 (1/2" pitch) sizes in Simplex (single) row of teeth. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

GBP 14.99

1

Brand

Size

Merchant

Price (EUR)

21-L-050F Imperial Pilot Bore Timing Pulley, 21 Teeth, 3/8" Pitch, for A 1/2" Wide Belt

21-L-100F Imperial Taper Bore (1108) Timing Pulley, 21 Teeth, 3/8" Pitch, for A 1" Wide Belt

19-L-100F Imperial Taper Bore (1108) Timing Pulley, 19 Teeth, 3/8" Pitch, for A 1" Wide Belt

25-L-075F Imperial Taper Bore (1108) Timing Pulley, 18 Teeth, 3/8" Pitch, for A 1/2" Wide Belt

22-L-075F Imperial Taper Bore (1108) Timing Pulley, 18 Teeth, 3/8" Pitch, for A 1/2" Wide Belt

19-L-075F Imperial Taper Bore (1108) Timing Pulley, 18 Teeth, 3/8" Pitch, for A 1/2" Wide Belt

1615-25 Metric Taper Bush

2517-42 Metric Taper Bore Bush

1210-18 Metric Taper Bore Bush

1210-14 Metric Taper Bore Bush

L050I Spider Elements

Medway 4SR13/25BK 25MM 08B-1 Pre Bored Simplex Sprockets with Key Way & 2 Grub Screws

Powered by Cobiro