ProfitSpring | B2B PPC Agency

Scorpion 8000 Control Panel SCORP8000

Scorpion 8000 Control Panel SCORP8000Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 914.99

1

Scorpion 60 Battery Power Lead Cable SCORP60

Scorpion 60 Battery Power Lead Cable SCORP60The SCORP60 is used for connecting a Solo760 battery baton to the Scorpion Control Panel.

GBP 106.02

1

Scorpion 25 Access Point SCORP25

Scorpion 25 Access Point SCORP25Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree Approvals Scorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 136.62

1

Scorpion 7000 Portable Controller SCORP7000

Scorpion 7000 Portable Controller SCORP7000Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 1260.83

1

Scorpion 1001 Point Head Unit with Fixings SCORP1001

Scorpion 1001 Point Head Unit SCORP1001Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required. Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 492.97

1

Scorpion 2001 Aspiration Smoke Detection ASD Unit with Fixings SCORP2001

Scorpion 2001 Aspiration Smoke Detection ASD Unit SCORP2001Scorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required.Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activationFeaturesSmoke generation tailored for functional testing of point type smoke detectors Adjustable smoke time to suit characteristics of system under test clearing function enables quicker reset and reduced repeat alarmsTesting capacityIn excess of 240 tests of 15 seconds per Scorpion Head Unit Suitable detector types Optical photoelectric Ionization Appropriate Stimulus Benign particulate avoids material contamination Consistent repeatable stimulus from one test to the next Approved by world-leading detector manufacturersComplianceThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situations True functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesPedigree ApprovalsScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.

GBP 492.97

1

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001

Scorpion 1011 Point Smoke Detector Tester with Access Point SCORP1011-001What is ScorpionScorpion is a universal functional test solution for hard-to-access point smoke detectors. Scorpion is permanently installed adjacent to the detector it is designed to test and can be fitted as a retrofit or as part of a new installation. The smoke test is then run from a convenient position whenever required.Scorpion activates smoke detectors ionization and optical photoelectric technologies from the worlds leading manufacturers. These include detectors used in smoke activated fire door closing systems. A Scorpion installation uses its own cabling - keeping it separate from the fire detection system.How does it workA Scorpion Head Unit is connected to an easily accessible Control Panel or Access Point for use with the NEW Engineers Portable Controller which is where the Service Engineer interfaces with the Scorpion system. The Control Panel or Access Point can be positioned near the fire panel or control and indicating equipment allowing the Engineer to monitor both the smoke activation from the Scorpion as well as its effect on the detector.A Control Panel can control up to eight 8 Scorpion Head Units located up to 100 metres away depending on cable type used.An Engineers Portable Controller used in conjunction with an Access Point provides an alternative solution for sites with only a small number of hard-to-access detectors. In these cases each Scorpion Head Unit is permanently wired to an Access Point again located up to 100 metres away depending on cable type used.The system is powered and activated through the Control Panel or Engineers Portable Controller using a removable battery pack or battery baton leaving the system inert when not in use - preventing accidental or malicious activation.Key FeaturesSmoke generation tailored for functional testing of point type smoke detectorsAdjustable smoke time to suit characteristics of system under testClearing function enables quicker reset and reduced repeat alarmsIn excess of 240 tests of 15 seconds per Scorpion Head UnitSuitable detector types Optical photoelectric IonizationBenign particulate avoids material contaminationConsistent repeatable stimulus from one test to the nextApproved by world-leading detector manufacturersThe only way to activate hard-to-access smoke detectors in accordance with codes and standards and without the need to work in inaccessible situationsTrue functional testing using stimulus with wide smoke particle size range and characteristics to activate different detector technologiesResolution of access issues avoids conflict with safety access and security rulesScorpion is designed and manufactured by the worlds leading and only ISO 9001 registered specialist manufacturer of fire detector test equipment.Kit Includes1 x SCORP 10011 x SCORP 25

GBP 673.33

1

Testifire XTR2 TESTIFIRE-XTR2-HEAD-001 All-In-One Connected SmokeHeat Detector Test Head

Testifire XTR2 TESTIFIRE-XTR2-HEAD-001 All-In-One Connected SmokeHeat Detector Test HeadTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesWorks with the Detectortesters-connect AppAuto generates test reportFeatures clearing mode to eliminate repeat alarmsHigh heat setting allows for testing of heat detectors set to 100cAuto LED torch for testing in dark areasDT-ConnectThe DT-Connect app enhances the XTR2 by enabling users to monitor log and manage testing activities through a single platform.Standard DT-Connect FeaturesJob Creation Easily create and track testing tasks.Basic Test Result Capture Log key test results to meet compliance requirements.Premium DT-Connect Features 19.99 per month per device after a 90-day free trialAddressable Panel Time Logging Sync test times with panel events.Asset Management Track on-site assets and their testing history.Panel Reconciliation Verify test results via control panel alarms.Detailed Reports Generate comprehensive reports PDF or CSV.Full Test History Access a complete history of detector tests.Client Reporting Share reports with clients for compliance and system transparency.The premium plan offers advanced features tailored for engineers seeking detailed reporting and efficient control over their testing processes. After a 90-day free trial the premium subscription costs 19.99 per month per device and unlocks all the advanced features.

GBP 1624.84

1

Testifire XTR2 TESTIFIRE-XTR2-001 All-In-One Connected SmokeHeat Detector Test Kit

Testifire XTR2 TESTIFIRE-XTR2-001 All-In-One Connected SmokeHeat Detector Test KitTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Kit Includes1 x Testifire-BP-001 Li-ion Battery1 x Testifire-GEN-001 Smoke Generator1 x Testifire-CHAK-001 Charger Kit1 x TES3 Smoke CartridgeKey FeaturesWorks with the Detectortesters-connect AppAuto generates test reportFeatures clearing mode to eliminate repeat alarmsHigh heat setting allows for testing of heat detectors set to 100cAuto LED torch for testing in dark areasDT-ConnectThe DT-Connect app enhances the XTR2 by enabling users to monitor log and manage testing activities through a single platform.Standard DT-Connect FeaturesJob Creation Easily create and track testing tasks.Basic Test Result Capture Log key test results to meet compliance requirements.Premium DT-Connect Features 19.99 per month per device after a 90-day free trialAddressable Panel Time Logging Sync test times with panel events.Asset Management Track on-site assets and their testing history.Panel Reconciliation Verify test results via control panel alarms.Detailed Reports Generate comprehensive reports PDF or CSV.Full Test History Access a complete history of detector tests.Client Reporting Share reports with clients for compliance and system transparency.The premium plan offers advanced features tailored for engineers seeking detailed reporting and efficient control over their testing processes. After a 90-day free trial the premium subscription costs 19.99 per month per device and unlocks all the advanced features.

GBP 1894.27

1

Brand

Merchant

Price (EUR)