ProfitSpring | B2B PPC Agency

Elmdene A4-DOC-BOX Document Box A4

Elmdene A4-DOC-BOX Document Box A4The standard boxes are formed from white powder coated steel with cam lock it is also available with Bull dog clip.

GBP 22.15

1

Scope GEO8BOOTD Protective Boot

Scope GEO8BOOTD Protective BootA protective boot for GEO84Z GEO85Z GEO86Z GEO87Z pagers.Key FeaturesIncludes lens and strap with dog clasp

GBP 18.72

1

Aritech ATS1483 ATS Reader Address Configuration Card To Configure ATS118x Readers To Unsecure Mode

Aritech ATS1483 ATS Reader Address Configuration Card To Configure ATS118x Readers To Unsecure ModeThe ATS1483 ATS118x to Unsecure Mode configuration card allow to configure the ATS1180 or ATS1181 to ATS116061N Mifare reader mode unsecure mode without any programming device or menu configuration.The configuration card has to be applied when the reader is not online.

GBP 24.44

1

Scope GEO4BOOTD Protective Boot for GEO40A Pager

Scope GEO4BOOTD Protective Boot for GEO40A PagerA protective boot suitable for use with the GEO40A range of alphanumeric pagers.Key FeaturesComes with lens and strap with dog clasp

GBP 18.72

1

C-Tec AL5 XLRM to XLRF Balanced Lead

C-Tec AL5 XLRM to XLRF Balanced LeadThe AL5 is a XLRM to XLRF Balanced Lead.This lead is also available to purchase in the AKT1 200m2 TVMusic Lounge Hearing Loop Kit -Click here to see full product.The AKT1 Includes a PDA200E hearingloop amplifier AMP handheld microphone APS SCART to double phono lead APXM outreach plate APL outreach plate AL5 lead and 2 x 6m Belden cable.

GBP 30.06

1

Fike NS100R-D Red Conventional Sounder - 12 To 56 VDC - 95 To 110dB - 32 Tones - IP65

Fike NS100R-D Red Conventional Sounder - 12 To 56 VDC - 95 To 110dB - 32 Tones - IP65The Fike NS100-D is an EN54-approved sounder that provides efficient and low-power alarm signalling. With its unique first-fix installation method and deep IP65 rated mounting base it offers quick and cost-effective installation.Designed for durability and reliable operation the NS100-D is suitable for various applications with its selectable tone options.Key FeaturesIP65 rated deep mounting baseQuick First fix installationWide operating voltage 12 to 56VdcLow power consumptionReverse polarity monitoring32 alarm tones2 stage alarm optionFully synchronised

GBP 27.19

1

SAS NET206 Push To Call Lead 2.5m Long

SAS NET206 Push To Call Lead 2.5m LongThe NET206 is designed to plug into our range of nurse call units. It comes equipped with a sturdy lead 2.5 metres long with moulded jack plug and cable strain. A large orange button is provided for the patient to press with a finger or even the palm of their hand.If the lead is accidentally pulled away from the nurse call point a call will be made to draw the fact to the attention of the carer. The lead is shown in its wall mounted holster that can be provided so the lead can be stored safely and neatly when not in use.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 19.44

1

C-Tec AL1 3.5mm Jack to 3.5mm Jack Lead

C-Tec AL1 3.5mm Jack to 3.5mm Jack LeadThe AL1 is a 3.5mm jack to 3.5mm jack lead which connects SWGN to APJ.

GBP 30.59

1

C-Tec AL4 XLRM to 6.35mm Mono Jack Lead

C-Tec AL4 XLRM to 6.35mm Mono Jack LeadThe AL4 is a XLRM to 6.35mm Mono Jack Lead.

GBP 25.90

1

C-Tec AL3 3.5mm Jack to Bare Ended Lead

C-Tec AL3 3.5mm Jack to Bare Ended LeadThe AL3 is a 3.5mm Jack to Bare Ended Lead it connects the FPROSG Signal Generator to PDA103 ML1 and PDA200E induction loop amplifiers.

GBP 20.71

1

C-Tec EAPSWITCHBP EACIE Internal Switch Blanking Plate to BS8629

C-Tec EAPSWITCHBP EACIE Internal Switch Blanking Plate to BS8629The EAPSWITCHBP is an EACIE Internal Switch Blanking Plate to BS8629.

GBP 22.68

1

Crowcon M04876 Xgard Interface Gasket Required For Fitting Xgard To ESU

Crowcon M04876 Xgard Interface Gasket Required For Fitting Xgard To ESUAn Xgard Interface Gasket which is required for fitting the Xgard to ESU.

GBP 23.33

1

Aritech ABT-W6-TMPL Metal Template To Determine The Mounting Holes

Aritech ABT-W6-TMPL Metal Template To Determine The Mounting HolesThe ABT-W6-TMPL is a metal template designed to determine the mounting holes.

GBP 27.38

1

Carrier ACA001 RTE Request To Exit Button Surface Or Flush Mountable 76x72x32mm

Carrier ACA001 RTE Request To Exit Button Surface Or Flush Mountable 76x72x32mmThe ACA001 is a surface mount request to exit button.Key FeaturesFlush mountedMomentary - pulseEasy to install

GBP 25.19

1

Hochiki SMB-3 DIN Mounting Box Small up to 4 DIN Rail Modules

Hochiki SMB-3 DIN Mounting Box Small Box up to 4 DIN Rail ModulesModel SMB-3 is from a range of IP66 rated grey RAL7035 enclosures designed for use with the Hochiki range of DIN Modules. The SMB-3 features a selection of metric knock-outs and is supplied with a transparent black lid as standard an opaque lid is also available sold separately.The unit is supplied with a DIN Rail section plus fixings and will accept up to four Hochiki DIN Rail Modules side-by-side.Key FeaturesDesigned to house up to 4 Hochiki DIN ModulesQuick-release screwsPolyurethane gasket provides IP66 protectionCorrosion free resistant to most alkaline and acidTemperature resistance to 70 deg C Impact resistant and Non-flammable20 knock-outsSupplied with DIN Rail and fixings

GBP 41.63

1

Morley DST5 Sampling Tube 1.2m to 2.4m Duct Width

Morley DST5 Sampling Tube 1.2m to 2.4m Duct WidthThe metal sampling tube is available in different lengths depending on application and can be clicked into position with one smooth motion from either the front or the back of the D2E DNRE duct detectors.

GBP 39.24

1

Vesda WHTUN-10 Socket Union Pack of 10 Equivalent to PIP-003-W

Vesda WHTUN-10 Socket Union Pack of 10 Equivalent to PIP-003-WA pack of 10 x 25mm Socket Unions designed for connecting PVC and ABS pipes 25mm in diameter.Used to join together two pieces of ABS pipe of the same dimensions with the ability to separate later leaving a clean break for maintenance of the pipe. These should always be connected withABS solvent cement.This component is ideal for the easy break of a pipe. Typically this is used in front of the return air plenums of air conditioning unitsKey FeaturesMaterial ABSColour RedOperating temperature range -40C to 70CEN54 testedThis type of unit enables the simple dismantling of pipes.The recommended use of the socket is to provide the link between the pipes and the detector

GBP 39.35

1

Testifire XTR2 TESTIFIRE-USBC-001 USB-C to USB-C Cable

Testifire XTR2 TESTIFIRE-USBC-001 USB-C to USB-C CableTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesA USB-C to USB-C cable for use with the Testifier XTR2

GBP 24.47

1

Crowcon M04972 I.S. PCB Cover - Type 1 Only - Required In Addition To M04770 PCB

Crowcon M04972 I.S. PCB Cover - Type 1 Only - Required In Addition To M04770 PCBAn I.S PCB Cover Type 1 only.This is required in additional to the M04770 PCB.

GBP 22.36

1

Morley DST3 Sampling Tube for 0.6m to 1.2m Duct Width

Morley DST3 Sampling Tube for 0.6m to 1.2m Duct WidthThe metal sampling tube is available in different lengths depending on application and can be clicked into position with one smooth motion from either the front or the back of the D2E DNRE duct detectors.

GBP 31.61

1

Morley DST1.5 Sampling Tube for 0.3m to 0.6m Duct Width

Morley DST1.5 Sampling Tube for 0.3m to 0.6m Duct WidthThe metal sampling tube is available in different lengths depending on application and can be clicked into position with one smooth motion from either the front or the back of the D2E DNRE duct detectors.

GBP 20.04

1

Patol Knock on Clip 14mm to 20mm MS Galvanised Pack of 10

Patol Knock on Clip 14mm to 20mm MS Galvanised Pack of 10A Knock on Edge Clip is ideal when installing linear heat detection cable onto girders metal beams and steel works.

GBP 20.16

1

Patol Knock on Clip 3mm to 7mm MS Galvanised Pack of 10

Patol Knock on Clip 3mm to 7mm MS Galvanised Pack of 10A Knock on Edge Clip is ideal when installing linear heat detection cable onto girders metal beams and steel works.

GBP 18.48

1

Patol Knock on Clip 8mm to 13mm MS Galvanised Pack of 10

Patol Knock on Clip 8mm to 13mm MS Galvanised Pack of 10A Knock on Edge Clip is ideal when installing linear heat detection cable onto girders metal beams and steel works.