ProfitSpring | B2B PPC Agency

C-Tec BF430CEASR EA Wall Sounder Self-Testing Red

C-Tec BF430CEASR EA Wall Sounder Self-Testing RedA self-testing wall sounder designed for use with C-TECs CAST-powered EVAC-ALERT evacuation alert system.Key FeaturesDesigned for use on a C-TEC CAST-powered EVAC-ALERT systemSelf-testing functionality means access to a flat is only required when a fault is detectedEmits a clear concise and recognisable evacuation alarm toneImpressive 100dBA sound output at 1mLow 5.5mA alarm currentIP21C ratedComplies with EN54-3Reliable hard-wired technology

GBP 74.59

1

C-Tec BF430CEASW EA Wall Sounder - Self Testing - White

C-Tec BF430CEASW EA Wall Sounder - Self Testing - WhiteThe BF430CEASW is a new EN54-3 compliant evacuation alert system from C-TEC specifically designed to assist the fire rescue services FRS in evacuating high-rise residential buildings. The device offers low current consumption emitting a clear concise and recognisable evacuation alarm tone.Details Designed for use on a C-TEC CAST-powered EVAC-ALERT system Self-testing functionality means access to a flat is only required when a fault is detected Emits a clear concise and recognisable evacuation alarm tone Impressive 100dBA sound output at 1m Low 5.5mA alarm current IP21C rated. Complies with EN54-3 Red version also available order code BF430CEASR

GBP 74.59

1

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65The X-CS3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 55.91

1

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA Middle East RegionsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesSpecialist membrane allowing use of Testifire XTR2 with larger detectors

GBP 45.65

1

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL BoxThe ProReact Digital End-of-Line Unit is designed to effectively terminate up-to two zones of ProReact EN Digital LHD cable in a secure weatherproof enclosure.Furthermore the built-in switches for testing a fault and alarm condition allow the integrity of the whole system to be functionally checked in situ providing comprehensive testing and maintenance of the system.Typical ApplicationsCar parksOil and gas tank farmsMinesCable traysCold storageConveyor beltsKey FeaturesWeatherproof enclosureBuilt-in switchesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60

1

Fireclass 516.016.175FC ProReact EN Digital End of Line

Fireclass 516.016.175FC ProReact EN Digital End of LineThermocables ProReact Digital End-of-line Unit with test facility has also been certified to EN54-282016 and enables users to undertake hassle-free functional testing of the system. Users can verify normal conditions trouble and alarm functions of a system by simulating a break in the cable or overheat condition.Key FeaturesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60

1

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base Red Lockdown

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base RedLockdownThe Hi-Output range of addressable loop-powered devicesinclude voice sounders and combined voice sounder VADs. Their purpose is tovisually and audibly alert building occupants of a fire alarm. They aredesigned for use with C-TECs ZFP and XFP Apollo Discovery panels and otherthird-party Apollo Discovery panels. However compatibility testing withthird-party panels is recommended to ensure correct operation.Please note this image is for illustrativepurposes only

GBP 76.22

1

Ziton ZX432-2P Multi-Sensor Optical Heat Detector for Wireless Use

Ziton ZX432-2P Multi-Sensor Optical Heat Detector for Wireless UseThe ZR432-2P is a wireless POLAR WHITE addressable multisensor capable of operating in optical temperature or multisensor opticalheat modes.Detector controlThe ZR432-2 detector is controlled from the main control panel via a loop wired radio interface module allowing both wireless and hardwired devices to be seamlessly located and controlled from the same wiring loop. Every wireless device controlled through the radio loop module is assigned its own IDENT address with which the main control panel communicates providing the same system facilities as directly wired devices.Fast response to a wide range of firesDesigned to provide the earliest response to a wide range of fire types in locations where hard wiring is not an option ZR432-2 detectors combine optical smoke sensing and thermal monitoring to provide an accurate warning of fire. Smoke sensing may be isolated for areas where ambient smoke may exist at certain times of the day or used on a day night basis in premises where heat only is required whilst the building is occupied.System operationTemperature and smoke sensitivity may be set by a selection of switches located in the base of the ZR432-2. Calibration and self-testing are carried out automatically.Removal or replacement of an incorrect sensing devices are identified by the system and details displayed at the main control panel. Sophisticated auto contamination adjustment compensates for any long-term drift in performance caused by dirt entering the sensing chamber.For ease of removal ZR432-2 detectors plug into the radio base by a simple twist and lock action.

GBP 54.52

1

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor DetectorOpticalHeatThe Soteria Multi-Sensor Detector uses advanced opticalsensing technology PureLight to detect smoke particles entering the chamberand is fitted with two thermistors for detecting heat. It easily discriminatesagainst false alarm stimuli and is a great environmentally friendly alternativeto ionisation detectors.Key FeaturesFive modes of operation for ultimate fire detection andfalse alarm management in a wide range of applicationsUtilises digital Core Protocol communications providing arange of advanced fire detection featuresA sophisticated dynamic algorithm providing transientrejection and compensation for drift while maintaining accurate sensitivityFasTest for quicker testing of detectorsIntegrated switchable isolator

GBP 56.16

1

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeatThe Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat uses advanced dual optical sensing technology to accurately detect smoke particles entering the chamber and a central heat thermistor for detecting heat. It has five different operating modes giving you the option to adapt the detector to suits it environment.Key Features of the SA5100-710APOAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 48.30

1

Ringtail X-MRD3NMP LED Non-Maintained Recessed Spotlight

Ringtail X-MRD3NMP LED Non-Maintained Recessed SpotlightThis innovative self-contained LED emergency Downlighterfeatures a single point high illumination white LED with an optical lens foreither corridor open area or flood. Suitable for modern buildings where highperformance and a minimum maintenance cost are essential.Key FeaturesHigh lumen outputLow power consumption3 optic options standard open area or corridorIP54 Recess mounting open area corridorDALI and Self-Testing options0C 25C operating temperature3W High Output 160mm ceiling void 43mmcutout

GBP 74.29

1

Wagner AD-05-0590 Smoke Pen

Wagner AD-05-0590 Smoke PenThe AD-05-0590 from the Wagner range of products is a CT-1 smoke pen.The Smoke Pen simplifies an Aspirating Smoke Detection ASD system testing by providing a user-friendly design that generates a continuous smoke trail.Key FeaturesEasy to useSimplifies system smoke testsEnsures continuous and consistent smoke trail

GBP 54.83

1

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ Adaptors

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ AdaptorsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesWall PSU for use with the Testifire XTR2 battery packContains UK EU US AUS AND NZ Adaptors

GBP 48.91

1

C-Tec NC302RT Test Infrared Receiver

C-Tec NC302RT Test Infrared ReceiverThe NC302RT is a test infrared receiver to make fob testing simple. It is designed to be installed in a safe room or area. The fob to be tested is activated in this area. The LEDs of the tester will flash on successful activation but the system will not go into alarm.

GBP 77.92

1

C-Tec QT302RT Quantec Test Infrared Ceiling Receiver

C-Tec QT302RT Quantec Test Infrared Ceiling ReceiverThe QT302RT is a test infrared receiver to make fob testing simple. It is designed to be installed in a safe room or area. The fob to be tested is activated in this area. The LEDs of the tester will flash on successful activation but the system will not go into alarm.

GBP 71.89

1

C-Tec BF459ACXW CX O Class Base - VAD - White

C-Tec BF459ACXW CX O Class Base - VAD - WhiteThe Base Mount range of addressable loop-powered basesincludes voice sounders and combined voice sounder visual alarm devices VADs.Their purpose is to visually and audibly alert building occupants of a firealarm. They are designed for use with C-TECs ZFPXFP Apollo Discovery protocolpanels and other third-party Apollo Discovery protocol panels. Howevercompatibility testing with third-party panels is recommended to ensure correctoperation.The bases offer low current consumption highsound output high efficiency VADs seven selectable volume levels 15 selectabletone pairs and built-in short-circuit loop isolators.

GBP 50.47

1

Cranford Controls 511-148 Sounder Beacons MED amp ABS Approved - Red - White LED - 24VDC Deep

Cranford Controls 511-148 Sounder Beacons MED ABS Approved - Red - White LED - 24VDC DeepThe VTB EN54-3 approved sounderbeacon has undergone additional development to meet the needs of the harsh environments in marine applications.Marine variants come with 32 sounder tones that include the most common sound patterns and two marine specific tones.Key FeaturesProducts have undergone additional EMC vibration and salt mist testing for use in the maritime industryOne device with approved sounder function and energy efficient visual indicationSelectable sounder tones include Marine General Alarm and the International Marine Organisation Code 2 Continuous signals

GBP 49.62

1

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element Yellow

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element YellowThe DMN960Y is a surface mount YELLOW addressable 990 Series manual call point with a high strength plastic housing. The LED indicator provides visual confirmation of alarm initiation. The test key included with each unit facilitates functional testing of the call point. The manual call point is delivered complete with resettable element.Operating PrinciplesThe address of each call point is set at the commissioning stage by means of a seven-segment DIL switch. The device features plug and play terminal connections. A single alarm LED is provided on the call point and is controlled independently of the call point by the fire panel.AccessoriesIt is possible to surface or flush mount any of the call points in the range. Optional accessories to accommodate this are available separately.ApprovalsAll relevant manual call points in the range have been tested by LPC and approved by LPCB and a number of other approval authorities.Key FeaturesAddressable manual call pointLED alarm indicatorTamper resistant break glass designEasy to test with self-resetFast responsePlug and play terminal connections for fast wiringAllow wiring continuity testing before fittingResettable element fitted

GBP 70.24

1

C-Tec BF457ACXWLD CX C Class Base Voice Sounder - White Lockdown

C-Tec BF457ACXWLD CX C Class Base Voice Sounder - White LockdownThe Base Mount range of addressable loop-powered basesincludes voice sounders and combined voice sounder visual alarm devices VADs.Their purpose is to visually and audibly alert building occupants of a firealarm. They are designed for use with C-TECs ZFPXFP Apollo Discovery protocolpanels and other third-party Apollo Discovery protocol panels. Howevercompatibility testing with third-party panels is recommended to ensure correctoperation.The bases offer low current consumption highsound output high efficiency VADs seven selectable volume levels 15 selectabletone pairs and built-in short-circuit loop isolators.Please note this image is for illustrative purposes only

GBP 64.69

1

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCO

Apollo SA5100-810APO Soteria Tri-Sensor Detector Dual OpticalHeatCOThe Soteria Tri-Sensor Detector Dual OpticalHeatCO uses advanced dual optical sensing technology to accurately detect smoke particles and discriminate against false alarm stimuli. It has a centrally located heat thermistor along with a CO sensor giving you three methods of detection.The detector can operate in 5 modes of sensitivity.Soteria detectors have been designed to operate on Discovery loops. This allows for Soteria detectors and bases to operate on existing systems and for Soteria detectors to operate on Discovery bases XPERT 7 Intelligent Mounting Base.Key FeaturesAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 67.08

1

Toolbox for Engineers Toolkits ST51

Toolbox for Engineers Toolkits ST51The ST51 is a Toolbox which has been designed for use with the Engineers Toolkit.Key FeaturesHigh-quality materials for durability and longevityRobust construction for daily useLightweight and easy to transportComprehensive selection of toolsSecure storage for tools

GBP 84.67

1

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10The EN range of Junction Boxes feature a high reliability spring action micro switch for the lid tamper so now your engineers can confidently connect the tamper when using a junction box maintaining the security and integrity of the system and indeed the reputation of your company. The Junction Boxes are designed to meet PD66622004 A1 A2 BS EN 50131-12006 and the environmental testing requirements of EN 50131-2- 22008 Class II or III as indicated.Key FeaturesDimensions 125L x 100w x 45dColour White

GBP 60.14

1

Baldwin Boxall Green DRS Overide Switch Apply Label at BBC BVCRBG

Baldwin Boxall Green DRS Overide Switch Apply Label at BBC BVCRBGDISABLED REFUGE BREAK GLASS UNITDisabled refuge units have the option to be triggered by the fire alarm panel so that the units become active during an emergency. Fire telephones emergency telephones and toilet alarms are constantly active.This prevents accidental or deliberate misuse as the remote units remain dormant until activated.In order to activate the system for non-emergency use it is necessary to override the fire panel. This is achieved by connecting a break glass unit BVCRBG to the master control panel.Enables weekly testing and routine maintenance - as set out in BS5839-92011.

GBP 69.85

1

Crowcon S01343 Bayonet Sensor Housing For 3-Pin 32mm Diameter Sensors for TXgard-IS

Crowcon S01343 Bayonet Sensor Housing For 3-Pin 32mm Diameter Sensors for TXgard-ISA bayonet sensor housing for 3-pin 32mm diameter sensors. Designed for use with the TXgard-IS.Crowcon a leading pioneer in personal gas monitoring technology provides an extensive selection of customisable options in their gas detectors. These advanced devices have been refined over many years of worldwide expertise making them exceptionally well-suited for diverse industrial and challenging environmental conditions.

GBP 47.04

1

Fireclass 516.016.018FC ProReact Analogue End Of Line Unit

Fireclass 516.016.018FC ProReact Analogue End Of Line UnitProReact EN Analogue End-of-line Unit is compulsory in all ProReact EN Analogue LHD systems as it has a key role in the operation of the technology allowing the control unit to detect a short circuit or open circuit in the sensor cable. It is small in size and is straightforward to be mounted on surfaces.Thermocables ProReact Digital End-of-line Unit with test facility has also been certified to EN54-282016 and enables users to undertake hassle-free functional testing of the system. Users can verify normal conditions trouble and alarm functions of a system by simulating a break in the cable or overheat condition.The ProReact technology offers an alternative solution to heat protection in a wide range of applications and industries from power generation to oil and gas. It is a cost-effective resettable and can be used in applications that are less suited to other types of fire detectors. The ProReact EN Analogue LHD system has a wide range of available alarm temperatures to suit different environments.Key FeaturesFor use with the ProReact Analogue ControllerSmall sizeImproved testing and maintenance functionalityManufactured in the UK

GBP 61.33

1

Brand

Merchant

Price (EUR)