167 results (0,12877 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Vesda Xtralis 25mm White System Test Point PIP-018-W

Vesda Xtralis 25mm White System Test Point PIP-018-W

Vesda Xtralis 25mm White System Test Point PIP-018-W Pack of 1025mm System Test Points are installed at the furthest point of the pipework and are used to introduce smoke in order to measure the time it takes for the smoke to reach the detectors. The maximum transport time is 120 seconds. They should always be connected withABS solvent cement.Key FeaturesMaterial ABSColour WhiteOperating temperature range -40C to 70CEN5425mmPack of 10Please note The PIP-018-W is equivalent to the WHTAST025I.

GBP 47.63
1

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APO

Apollo Cat O. XP95 Sounder VAD Base with Isolator 45681-705APOThe XP95 Sounder VAD Base is a loop-powered sounder and EN 54-23 approved VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.You can perform a Self Test this is an important safety feature which has been incorporated into the Sounder VAD Bases when it is switched on it tests itself by checking the actual sound output and flash operation.There are 3 possible outcomes from the test if the transmitter readsA value of 1 Sounder fault this means there was no sound detected in 5 seconds of the sounder being switched on.A value of 2 VAD fault means there is no current being drawn by the LEDs.A value of 3 Sounder and VAD fault where neither of the above elements are operating correctly.If no sound is detected within 5 seconds of the Sounder VAD Bases being switched on it will transmit an analogue value of 1 sounder fault when it is next polled.This feature can also be used during commissioning or periodical maintenance testing. Simply activate the Sounder VAD for at least 5 seconds and check the control panel for a fault signal. If none is received the Sounder VAD Base is working properly.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of alert and evacuate tonesSynchronisation of visual indicator flashIndividual and group addressingUnique acoustic and VAD self-testBuilt in isolator

GBP 72.02
1

Vesda Xtralis 25mm Air Sampling Test Point - Pack of 10

Vesda Xtralis 25mm Air Sampling Test Point - Pack of 10

Vesda Xtralis 25mm Air Sampling Test Point - Pack of 10Air sampling test points allow for functional smoke testing of aspirating smoke detection systems and are typically located at the end of a sampling pipe network.VESDA provides the discreet detection required in heritage buildings by routing the sampling pipes in areas that are not visible from normal occupancy. Small-bore capillary pipes are used to provide detection at the required location. The room fabric often dictates the location of these capillary tubes. Hiding the capillary tubes behind light fittings blending in with ceiling paintings or forming part of the ceiling sculptures can all be used to provide invisible smoke detection.In high volume atria applications such as cathedrals capillary sample points can be routed into the area at intermediate vertical levels to good effect to overcome stratification. The higher potential sensitivity of the VESDA system means that less smoke is required at the sample points to provide an alarm condition.Key FeaturesOptimising performanceTough and durableChemical resistance propertiesCompatible with VESDA VESDA-E ICAM FAAST Airsense and SecuritonLightweightPack of 10Please note The PIP-018 is equivalent to the REDAST025I.

GBP 47.63
1

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8

Apollo 55000-739APO XP95 Open-Area VAD Cat. C - White Body Red Flash C-3-8The XP95 Open-Area Visual Alarm Devices VADs have been developed as primary or supplementary alarm devices. The loop powered VAD may be used in situations where there is a risk that sounders will not be heard. It might also be required where deaf or hearing impaired persons may be present.Key FeaturesHigh intensity red LEDsEN 54-23 compliant Category C VADCoverage C-3-8Flash Rate 0.5 HzFault signal if LED checked

GBP 45.24
1

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APO

Apollo Cat O. XP95 VAD Base with Isolator 45681-709APOThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.The XP95 VAD Base is a loop-powered VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. The VAD base can be used with either a detector fitted or with a cap as a stand-alone device.Key FeaturesEN54-23 approvedFlash rate of 0.5HzSynchronisation of VAD flashIndividual and group addressingUnique VAD self-testLoop-poweredBuilt in isolator

GBP 58.67
1

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APO

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APO

Apollo Discovery Cat O. Discovery Sounder VAD Base with Isolator 45681-700APOThe Discovery Sounder VAD Base makes full use of the Discovery protocol. For ease of commissioning a Magnetic Wand can be used to test and adjust each sounder VAD locally.Key FeaturesEN54-23 certifiedFlash rate of 0.5HzIt is possible to set individual volume of the sounder from the panel15 pairs of tones including IMO code 1A General Emergency Alarm and IMO Code 2 All ClearBuilt in isolatorBrand InformationDiscovery is a range of high-specification analogue addressable fire detectors and alarm devices. Discovery detectors offer effective false alarm management by a combination of EN 54 approved operating modes and sophisticated algorithms. Drift compensation further reduces the likelihood of false alarms caused by a build-up of dust in the sensing chamber. In addition to the familiar smoke and heat detectors the Discovery range features two multisensor detectors. One is an opticalheat multisensor which can be used to protect against many types of fire risk. The other is a carbon monoxideheat multisensor which protects against both smouldering fires and those generating heat.OperationThe Discovery Multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor heat sensor. The Discovery OpticalHeat Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. The way in which the signals from the two sensors are combined depends on the response mode selected.The five modes provide response behaviour which incorporates pure heat detection pure smoke detection and a combination of both. The multisensor is therefore useful over the widest range of applications. The signals from the optical smoke sensing element and the temperature sensor are independent and represent the smoke level and the air temperature respectively in the vicinity of the detector.The detectors micro-controller processes the two signals according to the mode selected. When the detector is operating as a multisensor the temperature signal processing extracts only rate-of-rise information for combination with the optical signal. In these modes the detector will not respond to a slow temperature increase even if the temperature reaches a high level. A large sudden change in temperature can however cause an alarm without the presence of smoke if sustained for 20 seconds.

GBP 78.12
1

Morley ECO1000RTUA Remote LASER Tester for Vision Detectors

Morley ECO1000RTUA Remote LASER Tester for Vision Detectors

Morley ECO1000RTUA Remote LASER Tester for Vision DetectorsThe ECO1000RTUA is a Test Unit for Vision Detectors.The Laser remote tester can be used in conjunction with a wide range of ECO1000 series detectors. The device transmits a coded message which prevents false alarms generated by other devices using a laser. With a range of several meters the tester provides an easy way to test ECO1000 detectors and removes the need for direct physical access to the detector.Key FeaturesWireless remote test unit using laser beam for conventional ECO1000 series detectorsMaximum range 7m

GBP 52.33
1

Ziton ZP886R ZP7 Series Intelligent Addressable Manual Call Point

Ziton ZP886R ZP7 Series Intelligent Addressable Manual Call Point

Ziton ZP886R ZP7 Series Intelligent Addressable Manual Call PointThe Ziton ZP886R is a red single action indoor Manual CallPoint MCP. It comes with resettable element test connector and test key.Multiple optional accessories are available to facilitate most indoorinstallation requirements.It is a standard profile indoor MCP suitable for surfaceand recess mount installations using standard or legacy European electricalboxes. With its designer dual tricolour LEDs it offers 180 clear localindication of its operational status even from a side view in a passageinstallation. Front access test key facility allows unhindered accessregardless of the installation location. The key doubles as a test anddisassembly tool allowing removal of the MCP front cover without the need foradditional tools. Deploy seamlessly into existing legacy systems without CIEconfiguration changes.Key FeaturesRed single actionReliable single action manual call point for surface andflush mountingDual tri-colour status indicators offers 180 alarmvisibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting toexisting installationsMatching back box with rear top and bottom cable entryScreen connection terminal for electrically noisyinstallationsPluggable connector with link through facility for ease ofinstallation and pre-commissioning testingAn alarm flag on the face of the manual call point allowsalarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 46.31
1

Ziton ZP886W ZP7 Addressable Manual Call Point White

Ziton ZP886W ZP7 Addressable Manual Call Point White

Ziton ZP886W ZP7 Addressable Manual Call Point WhiteThe Ziton ZP886W is a white single action addressable indoor manual call point. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.This single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access and test key facility.CompatibilityThe ZP880 range may be used on compatible Ziton fire systems. They can be deployed seamlessly into existing legacy systems without CIE configuration changes.Installation and maintenance friendlyThe front-facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.Key FeaturesReliable single action manual call point for surface mountingA dual tri-colour status indicator offers 180 alarm visibilityTamper resistant design with resettable or frangible elementStandard mounting options facilitates easy retrofitting to existing installationsUnobtrusive front facing test facilityMatching back box with rear top and bottom cable entryScreen connection terminal for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAlarm flag on the face of the MCP allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 74.71
1

Ziton ZP886R-TSKIT ZP7 Series Intelligent Addressable Manual Call Point cw Skirt

Ziton ZP886R-TSKIT ZP7 Series Intelligent Addressable Manual Call Point cw Skirt

Ziton ZP886R-TSKIT ZP7 Series Intelligent Addressable Manual Call Point cw SkirtThe ZP880 Series is an intelligent range of addressable manual call points. The ZP886R-TSKIT is a red single action indoor MCP. It is delivered complete with resettable element test connector and test key as well as a trim skirt for clean flush mount installation. Multiple optional accessories are available to facilitate most indoor installation requirements.Key FeaturesReliable single action manual call point for mounting on 3rd party wall boxesDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or optional frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 47.50
1

Fireclass 509.030.121FC Extinguishing Hold Off Manual Call Point

Fireclass 509.030.121FC Extinguishing Hold Off Manual Call Point

Fireclass 509.030.121FC Extinguishing Hold Off Manual Call PointThe509.030.121FC is anExtinguishing Hold Off Manual Call Point with activation and end of line resistors making it compatible with the Prescient III Suppression Panel. Operation is via a non-latching push button. This call point is surface mounted and comes complete with back box test key.Key FeaturesColour BlueCompatible with thePrescient III Suppression PanelSurface mountComes with back box and test key

GBP 45.79
1

Ziton ZP886R-KITF Intelligent Addressable Manual Call Point - Red cw Back Box amp Flip Cover

Ziton ZP886R-KITF Intelligent Addressable Manual Call Point - Red cw Back Box amp Flip Cover

Ziton ZP886R-KITF Intelligent Addressable Manual Call Point - Red cw Back Box Flip CoverThe Ziton ZP886R is a red single action indoor Manual Call Point MCP. It comes with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.It is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. Front access test key facility allows unhindered access regardless of the installation location. The key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools. Deploy seamlessly into existing legacy systems without CIE configuration changes.Key FeaturesRed single actionReliable single action manual call point for surface and flush mountingDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsMatching back box with rear top and bottom cable entryScreen connection terminal for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loopComes with back box and flip cover

GBP 50.39
1

Ziton ZP886R-RMKIT ZP7 Series Intelligent Addressable Manual Call Point - Recess Mount

Ziton ZP886R-RMKIT ZP7 Series Intelligent Addressable Manual Call Point - Recess Mount

Ziton ZP886R-RMKIT ZP7 Series Intelligent Addressable Manual Call Point - Recess MountThe ZP880 Series is an intelligent range of addressable manual call points. The ZP886R-RMKIT is a red single action indoor MCP. It is delivered complete with resettable element test connector and test key as well as a surface mount adapter for 3rd party back boxes. Multiple optional accessories are available to facilitate most indoor installation requirements.Key FeaturesReliable single action manual call point for mounting on 3rd party wall boxesDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or optional frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 127 devices per loop

GBP 50.38
1

Kidde KE-DM3010YS99 3000 Series Intelligent Addressable Manual Call Point

Kidde KE-DM3010YS99 3000 Series Intelligent Addressable Manual Call Point

Kidde KE-DM3010YS99 3000 Series Intelligent Addressable Manual Call PointThe KE-DM3000 Series is an intelligent range of addressable Excellence Series manual call points. The KE-DM3010YS99 is a yellow single action indoor MCP with an EXTINGUISHING RELEASE functional indication. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.AestheticsThis single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access test key facility.Installation maintenance friendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.Key FeaturesReliable single action manual call point for recess or surface mountingDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsBack box with rear top and bottom cable entryScreen connection terminal in the back box for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 128 devices supported per loop

GBP 48.44
1

Kidde KE-DM3010WS99 Intelligent Addressable Manual Call Point - English White

Kidde KE-DM3010WS99 Intelligent Addressable Manual Call Point - English White

Kidde KE-DM3010WS99 Intelligent Addressable Manual Call Point - English WhiteThe KE-DM3000 Series is an intelligent range of addressable Excellence Series manual call points. The KE-DM3010WS99 is a white single action indoor MCP with an ABORT EXTINGUISHING SYSTEM functional indication. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.AestheticsThis single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access test key facility.Installation maintenance friendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.Key FeaturesReliable single action manual call point for recess or surface mountingDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsBack box with rear top and bottom cable entryScreen connection terminal in the back box for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 128 devices supported per loop

GBP 50.70
1

Kidde KE-DM3010US99 Intelligent Addressable Manual Call Point - Blue

Kidde KE-DM3010US99 Intelligent Addressable Manual Call Point - Blue

Kidde KE-DM3010US99 Intelligent Addressable Manual Call Point - BlueThe KE-DM3000 Series is an intelligent range of addressable Excellence Series manual call points. The KE-DM3010US99 is a blue single action indoor MCP with an EVACUATION ALARM functional indication. It is delivered complete with resettable element test connector and test key. Multiple optional accessories are available to facilitate most indoor installation requirements.AestheticsThis single action MCP is a standard profile indoor MCP suitable for surface and recess mount installations using standard or legacy European electrical boxes. With its designer dual tricolour LEDs it offers 180 clear local indication of its operational status even from a side view in a passage installation. The clean face of the MCP is further enhanced by a front access test key facility.Installation maintenance friendlyThe front facing access for an aesthetically matching test key allows unhindered access regardless of the installation location. The MCP key doubles as a test and disassembly tool allowing removal of the MCP front cover without the need for additional tools.CompatibilityThe KE-DM3000 range may be used on all Kidde Excellence Series fire systems and are also compatible with legacy Aritech fire systems. They can in many cases be deployed into existing systems without CIE configuration changes.Key FeaturesReliable single action manual call point for recess or surface mountingDual tri-colour status indicators offers 180 alarm visibilityTamper resistant design with resettable or frangible elementUnobtrusive front facing test facilityStandard mounting options facilitates easy retrofitting to existing installationsBack box with rear top and bottom cable entryScreen connection terminal in the back box for electrically noisy installationsPluggable connector with link through facility for ease of installation and pre-commissioning testingAn alarm flag on the face of the manual call point allows alarm indication even without alarm LEDsFast no-tools-required maintenance using the test keyUp to 128 devices supported per loop

GBP 48.44
1

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA Middle East RegionsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesSpecialist membrane allowing use of Testifire XTR2 with larger detectors

GBP 45.65
1