424 results (0,14093 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

C-Tec BF430CEASR EA Wall Sounder Self-Testing Red

C-Tec BF430CEASR EA Wall Sounder Self-Testing Red

C-Tec BF430CEASR EA Wall Sounder Self-Testing RedA self-testing wall sounder designed for use with C-TECs CAST-powered EVAC-ALERT evacuation alert system.Key FeaturesDesigned for use on a C-TEC CAST-powered EVAC-ALERT systemSelf-testing functionality means access to a flat is only required when a fault is detectedEmits a clear concise and recognisable evacuation alarm toneImpressive 100dBA sound output at 1mLow 5.5mA alarm currentIP21C ratedComplies with EN54-3Reliable hard-wired technology

GBP 74.59
1

C-Tec BF430CEASW EA Wall Sounder - Self Testing - White

C-Tec BF430CEASW EA Wall Sounder - Self Testing - White

C-Tec BF430CEASW EA Wall Sounder - Self Testing - WhiteThe BF430CEASW is a new EN54-3 compliant evacuation alert system from C-TEC specifically designed to assist the fire rescue services FRS in evacuating high-rise residential buildings. The device offers low current consumption emitting a clear concise and recognisable evacuation alarm tone.Details Designed for use on a C-TEC CAST-powered EVAC-ALERT system Self-testing functionality means access to a flat is only required when a fault is detected Emits a clear concise and recognisable evacuation alarm tone Impressive 100dBA sound output at 1m Low 5.5mA alarm current IP21C rated. Complies with EN54-3 Red version also available order code BF430CEASR

GBP 74.59
1

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65The X-CS3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 55.91
1

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ Adaptors

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ Adaptors

Testifire XTR2 TESTIFIRE-WPSU-001 Wall PSU containing UK EU US AUS and NZ AdaptorsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesWall PSU for use with the Testifire XTR2 battery packContains UK EU US AUS AND NZ Adaptors

GBP 48.91
1

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL BoxThe ProReact Digital End-of-Line Unit is designed to effectively terminate up-to two zones of ProReact EN Digital LHD cable in a secure weatherproof enclosure.Furthermore the built-in switches for testing a fault and alarm condition allow the integrity of the whole system to be functionally checked in situ providing comprehensive testing and maintenance of the system.Typical ApplicationsCar parksOil and gas tank farmsMinesCable traysCold storageConveyor beltsKey FeaturesWeatherproof enclosureBuilt-in switchesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60
1

Fireclass 516.016.175FC ProReact EN Digital End of Line

Fireclass 516.016.175FC ProReact EN Digital End of Line

Fireclass 516.016.175FC ProReact EN Digital End of LineThermocables ProReact Digital End-of-line Unit with test facility has also been certified to EN54-282016 and enables users to undertake hassle-free functional testing of the system. Users can verify normal conditions trouble and alarm functions of a system by simulating a break in the cable or overheat condition.Key FeaturesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60
1

Carrier PS54VDC72W-UK PSU For POE302-MS - 100-240V AC Input 54V DC 1.28Amp 72W Output Power Supply Brick Model With UK Plug 040C

Carrier PS54VDC72W-UK PSU For POE302-MS - 100-240V AC Input 54V DC 1.28Amp 72W Output Power Supply Brick Model With UK Plug 040C

Carrier PS54VDC72W-UK PSU For POE302-MS - 100-240V AC Input 54V DC 1.28Amp 72W Output Power Supply Brick Model With UK Plug 040C Carrier Fire Securitys wide range of power supplies provide solutions for all the majority of various applications. Available in wall format with adaptors Carrier Fire Security supplies can be used with all major power plugs. Solutions include both in wall and power brick configurations. Switching supplies include advanced technology and power savings meeting Level V 5 International Efficiency in compliance with California Energy Commission Energy Star and the EU Code of Conduct for external power supplies. Supplies can be mixed and matched to a variety of Carrier Fire Security products to meet installation requirements.Key FeaturesCE approvedUL approvedCSA approvedCompact power supplies for use with PoE Switches Media ConvertersLow voltage outputsModels for Europe and UK regionIn line power supply

GBP 44.05
1

Fireclass 516.016.018FC ProReact Analogue End Of Line Unit

Fireclass 516.016.018FC ProReact Analogue End Of Line Unit

Fireclass 516.016.018FC ProReact Analogue End Of Line UnitProReact EN Analogue End-of-line Unit is compulsory in all ProReact EN Analogue LHD systems as it has a key role in the operation of the technology allowing the control unit to detect a short circuit or open circuit in the sensor cable. It is small in size and is straightforward to be mounted on surfaces.Thermocables ProReact Digital End-of-line Unit with test facility has also been certified to EN54-282016 and enables users to undertake hassle-free functional testing of the system. Users can verify normal conditions trouble and alarm functions of a system by simulating a break in the cable or overheat condition.The ProReact technology offers an alternative solution to heat protection in a wide range of applications and industries from power generation to oil and gas. It is a cost-effective resettable and can be used in applications that are less suited to other types of fire detectors. The ProReact EN Analogue LHD system has a wide range of available alarm temperatures to suit different environments.Key FeaturesFor use with the ProReact Analogue ControllerSmall sizeImproved testing and maintenance functionalityManufactured in the UK

GBP 61.33
1

C-Tec BF447CCCSR ActiV Conventional Hi-Output W-2.75-9 Wall VAD Sounder - Shallow Base

C-Tec BF447CCCSR ActiV Conventional Hi-Output W-2.75-9 Wall VAD Sounder - Shallow Base

C-Tec BF447CCCSR ActiV Conventional Hi-Output W-2.75-9 Wall VAD Sounder - Shallow BaseThe BF447CCCSR is compatible with C-TECs CFP FP MFP and EP203 conventional fire alarm panels and virtually all other makes testing on third-party panels is recommended before useIt is designed to be wall mounted and is for indoor areas only.Key FeaturesProvides W-2.75-9 rated light distribution when wall mounted min. 0.4 lux over a 2.75x 9m cuboid area. Can also be used as aW-4-4 VADSuperb soundintelligibilityChoose fromtwoevacuation voice messagesand four evacuationalarm tones yourselected evacuation message will be preceded by theselected toneThree selectable VAD flash rates 0.5Hz 1Hz OFFAlarm Current at 30Vdc 17mA 0.5Hz or 24mA 1HzAlarm Current at 18Vdc 18.5mA 0.5Hz or 30mA 1HzIP21C ratedManufactured in the UK by C-TEC

GBP 72.19
1

C-Tec BF447CCCDR ActiV Conventional Hi-Output W-2.75-9 Wall VAD cw Voice Sounder - Deep Base

C-Tec BF447CCCDR ActiV Conventional Hi-Output W-2.75-9 Wall VAD cw Voice Sounder - Deep Base

C-Tec BF447CCCDR ActiV Conventional Hi-Output W-2.75-9 Wall VAD cw Voice Sounder - Deep BaseTheBF447CCCDRis compatible with C-TECs CFP FP MFP and EP203 conventional fire alarm panels and virtually all other makes testing on third-party panels is recommended before useIt is designed to be wall mounted. Can be used in covered outdoor areas.Key FeaturesProvides W-2.75-9 rated light distribution when wall mounted min. 0.4 lux over a 2.75x 9m cuboid area. Can also be used as aW-4-4 VADSuperb soundintelligibilityChoose fromtwoevacuation voice messagesand four evacuationalarm tones yourselected evacuation message will be preceded by theselected toneThree selectable VAD flash rates 0.5Hz 1Hz OFFAlarm Current at 30Vdc 17mA 0.5Hz or 24mA 1HzAlarm Current at 18Vdc 18.5mA 0.5Hz or 30mA 1HzIP33C ratedManufactured in the UK by C-TEC

GBP 73.72
1

Ringtail X-MRD3NMP LED Non-Maintained Recessed Spotlight

Ringtail X-MRD3NMP LED Non-Maintained Recessed Spotlight

Ringtail X-MRD3NMP LED Non-Maintained Recessed SpotlightThis innovative self-contained LED emergency Downlighterfeatures a single point high illumination white LED with an optical lens foreither corridor open area or flood. Suitable for modern buildings where highperformance and a minimum maintenance cost are essential.Key FeaturesHigh lumen outputLow power consumption3 optic options standard open area or corridorIP54 Recess mounting open area corridorDALI and Self-Testing options0C 25C operating temperature3W High Output 160mm ceiling void 43mmcutout

GBP 74.29
1

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA amp Middle East Regions

Testifire XTR2 TESTIFIRE-MEML-001 Membrane for USA Middle East RegionsTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesSpecialist membrane allowing use of Testifire XTR2 with larger detectors

GBP 45.65
1

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base Red Lockdown

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base Red Lockdown

C-Tec BF446ACXDRLD CX Wall Voice Sounder Deep Base RedLockdownThe Hi-Output range of addressable loop-powered devicesinclude voice sounders and combined voice sounder VADs. Their purpose is tovisually and audibly alert building occupants of a fire alarm. They aredesigned for use with C-TECs ZFP and XFP Apollo Discovery panels and otherthird-party Apollo Discovery panels. However compatibility testing withthird-party panels is recommended to ensure correct operation.Please note this image is for illustrativepurposes only

GBP 76.22
1

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat

Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeatThe Apollo SA5100-710APO Soteria Multi-Sensor Detector Dual OpticalHeat uses advanced dual optical sensing technology to accurately detect smoke particles entering the chamber and a central heat thermistor for detecting heat. It has five different operating modes giving you the option to adapt the detector to suits it environment.Key Features of the SA5100-710APOAvailable with integrated switchable isolatorDrift compensationTricoloured LED status indicatorFasTest for quicker testing of detectorsLocking mechanism grub screwDIL Switch Addressing

GBP 48.30
1

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element Yellow

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element Yellow

Aritech DMN960Y 990 Series Manual Call Point - Complete with Back Box and Resettable Element YellowThe DMN960Y is a surface mount YELLOW addressable 990 Series manual call point with a high strength plastic housing. The LED indicator provides visual confirmation of alarm initiation. The test key included with each unit facilitates functional testing of the call point. The manual call point is delivered complete with resettable element.Operating PrinciplesThe address of each call point is set at the commissioning stage by means of a seven-segment DIL switch. The device features plug and play terminal connections. A single alarm LED is provided on the call point and is controlled independently of the call point by the fire panel.AccessoriesIt is possible to surface or flush mount any of the call points in the range. Optional accessories to accommodate this are available separately.ApprovalsAll relevant manual call points in the range have been tested by LPC and approved by LPCB and a number of other approval authorities.Key FeaturesAddressable manual call pointLED alarm indicatorTamper resistant break glass designEasy to test with self-resetFast responsePlug and play terminal connections for fast wiringAllow wiring continuity testing before fittingResettable element fitted

GBP 70.24
1

C-Tec BF433CCCDR65 ActiV Conventional Weatherproof Wall Sounder VAD with Deep Base

C-Tec BF433CCCDR65 ActiV Conventional Weatherproof Wall Sounder VAD with Deep Base

C-Tec BF433CCCDR65 ActiV Conventional Weatherproof Wall Sounder VAD with Deep BaseThe ActiV Hi-Output range of conventional sounders and combined sounder visual alarm devices VADs are designed for use with C-TECs range of fire panels and other compatible third-party panels. However compatibility testing with third-party panels is recommended to ensure correct operation. With a 100 dBA peak sound output 1 m their purpose is to visually and audibly alert building occupants of a fire alarm. Units are supplied with either a shallow or deep base in a red plastic enclosure.The devices offer low current consumption high sound output high efficiency VADs 31 selectable primary tones with selectable secondary tone set two selectable volume levels and three selectable VAD flash rates. Tones volume levels and VAD flash rates are changed using the devices 8-way DIP switch.Key FeaturesLPCB certified to EN54-3 Sounders and EN54-23 VADsProvides W-2.75-9 rated light distribution when wall mounted min. 0.4 lux over a 2.75x 9m cuboid area. Also rated as W-4-4 VADImpressive 100dBA sound output 1m31 selectable primary andsecondary tone pairs and two volume levels high and lowThree selectable VAD flash rates 0.5Hz 1Hz OFFAlarm Current at 30Vdc 12.2mA 0.5Hz or 19.5mA 1HzAlarm Current at 18Vdc 14.5mA 0.5Hz or 25mA 1HzIP55C rated weatherproofManufactured in the UK by C-TEC

GBP 61.16
1

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor Detector OpticalHeat

Apollo SA5100-760APO Soteria Multi-Sensor DetectorOpticalHeatThe Soteria Multi-Sensor Detector uses advanced opticalsensing technology PureLight to detect smoke particles entering the chamberand is fitted with two thermistors for detecting heat. It easily discriminatesagainst false alarm stimuli and is a great environmentally friendly alternativeto ionisation detectors.Key FeaturesFive modes of operation for ultimate fire detection andfalse alarm management in a wide range of applicationsUtilises digital Core Protocol communications providing arange of advanced fire detection featuresA sophisticated dynamic algorithm providing transientrejection and compensation for drift while maintaining accurate sensitivityFasTest for quicker testing of detectorsIntegrated switchable isolator

GBP 56.16
1

Cranford Controls 511-148 Sounder Beacons MED amp ABS Approved - Red - White LED - 24VDC Deep

Cranford Controls 511-148 Sounder Beacons MED amp ABS Approved - Red - White LED - 24VDC Deep

Cranford Controls 511-148 Sounder Beacons MED ABS Approved - Red - White LED - 24VDC DeepThe VTB EN54-3 approved sounderbeacon has undergone additional development to meet the needs of the harsh environments in marine applications.Marine variants come with 32 sounder tones that include the most common sound patterns and two marine specific tones.Key FeaturesProducts have undergone additional EMC vibration and salt mist testing for use in the maritime industryOne device with approved sounder function and energy efficient visual indicationSelectable sounder tones include Marine General Alarm and the International Marine Organisation Code 2 Continuous signals

GBP 49.62
1

C-Tec BF459ACXW CX O Class Base - VAD - White

C-Tec BF459ACXW CX O Class Base - VAD - White

C-Tec BF459ACXW CX O Class Base - VAD - WhiteThe Base Mount range of addressable loop-powered basesincludes voice sounders and combined voice sounder visual alarm devices VADs.Their purpose is to visually and audibly alert building occupants of a firealarm. They are designed for use with C-TECs ZFPXFP Apollo Discovery protocolpanels and other third-party Apollo Discovery protocol panels. Howevercompatibility testing with third-party panels is recommended to ensure correctoperation.The bases offer low current consumption highsound output high efficiency VADs seven selectable volume levels 15 selectabletone pairs and built-in short-circuit loop isolators.

GBP 50.47
1