ProfitSpring | B2B PPC Agency

Trend T18S 18V Brushless 1/4" Router Comes with 1 x 4Ah Battery & Charger

[mgz_pagebuilder]{"elements":[{"row_type":"full_width_row","content_position":"top","gap_type":"padding","content_align":"center","device_type":"all","background_type":"image","background_style":"auto","background_position":"center-top","parallax_speed":0.5,"mouse_parallax_size":30,"mouse_parallax_speed&

EUR 448.43

1

Radius 3.2mm radius x 6.3mm diameter

These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes.

EUR 21.35

1

Radius 1.6mm radius x 3.2mm diameter

These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes.

EUR 21.31

1

Radius 7.9mm radius x 15.9mm diameter

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.

EUR 32.35

1

Radius 4.8mm radius x 9.5mm diameter

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.

EUR 23.63

1

Radius 9.5mm radius x 32mm cut x 80mm

These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig.

EUR 41.28

1

Trend Snappy square drive 1/4X50mm

Square drive with ball locator.

EUR 9.17

1

Trend Snappy square drive 3/8X50mm

Square drive with ball locator.

EUR 11.89

1

Trend Snappy square drive 1/2X50mm

Square drive with ball locator.

EUR 13.66

1

Trend Snappy Phillips No 2 bit 150mm OL

Extra long Phillips screwdriver bits For use with Trend Snappy Quick Chuck.

EUR 10.19

1

Single flute cutter 3 mm diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

EUR 35.59

1

Single flute cutter 6.3 mm diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

EUR 28.90

1

Single flute cutter 1.5 mm diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

EUR 29.18

1

Tongue and groover set 41mm diameter

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.

EUR 53.44

1

Tongue and groover set 41mm diameter

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only.

EUR 53.39

1

Trimming cutter 9.5 mm diameter

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter.

EUR 33.10

1

Trend Snappy Auger Bit 10mm x 155mm

Made from Carbon steel and precision machined. Auger has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury.

EUR 9.17

1

Two flute cutter 12.7 mm diameter

TCT extra long cutter. Two flutes give a clean finish to cut edges. Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base.

EUR 43.56

1

Two flute cutter 12.7 mm diameter

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. TC tips are ground with greater clearance for routing of resinous material.

EUR 33.46

1

Two flute 12.7mm diameter x 50mm cut

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Ideal for cutting kitchen worktops. TC tips are ground with greater clearance for routing of resinous material.

EUR 46.84

1

Trimming Cutter 15.9 mm diameter

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

EUR 35.59

1

Rota-Tip straight 12.7 mm diameter

Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Refs. RT

EUR 99.30

1

Rota-Tip straight 12.7 mm diameter

Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Ideally

EUR 111.58

1

Brand

Merchant

Price (EUR)

Trend T18S 18V Brushless 1/4" Router Comes with 1 x 4Ah Battery & Charger

Radius 3.2mm radius x 6.3mm diameter

Radius 1.6mm radius x 3.2mm diameter

Radius 7.9mm radius x 15.9mm diameter

Radius 4.8mm radius x 9.5mm diameter

Radius 9.5mm radius x 32mm cut x 80mm

Trend Snappy square drive 1/4X50mm

Trend Snappy square drive 3/8X50mm

Trend Snappy square drive 1/2X50mm

Trend Snappy Phillips No 2 bit 150mm OL

Single flute cutter 3 mm diameter

Single flute cutter 6.3 mm diameter

Single flute cutter 1.5 mm diameter

Tongue and groover set 41mm diameter

Tongue and groover set 41mm diameter

Trimming cutter 9.5 mm diameter

Trend Snappy Auger Bit 10mm x 155mm

Two flute cutter 12.7 mm diameter

Two flute cutter 12.7 mm diameter

Two flute 12.7mm diameter x 50mm cut

Trimming Cutter 15.9 mm diameter

Rota-Tip straight 12.7 mm diameter

Rota-Tip straight 12.7 mm diameter

Powered by Cobiro