ProfitSpring | B2B PPC Agency

113 results (0,15981 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Brand

Merchant

Price (EUR)

Reset filter

Products

From

Shops

Diamond Blade 4 1/2.in. Grade Continuous Rim

Diamond Blade 4 1/2.in. Grade Continuous Rim

115mm General Purpose Diamond Blade with Continuous Rim Provides faster cutting speeds than segmented blades Continuous rim (ie. non-segmented) blades are most suited for cutting ceramic tiles, thin granite and marble

EUR 14.27

1

Express Nails 8 x 90mm (Box of 100)

Express Nails 8 x 90mm (Box of 100)

Made of high-grade steel; no screwing required; for use in concrete, solid brick, blocks, natural stone, sandstone and bison slabs. Fast and easy to use - just drill hole and hammer in. Fire resistant due to all steel material

EUR 11.41

1

Express Nails 6 x 80mm (Box of 100)

Express Nails 6 x 80mm (Box of 100)

Made of high-grade steel; no screwing required; for use in concrete, solid brick, blocks, natural stone, sandstone and bison slabs. Fast and easy to use - just drill hole and hammer in. Fire resistant due to all steel material

EUR 11.41

1

Express Nails 8 x 150mm (Box of 100)

Express Nails 8 x 150mm (Box of 100)

Made of high-grade steel; no screwing required; for use in concrete, solid brick, blocks, natural stone, sandstone and bison slabs. Fast and easy to use - just drill hole and hammer in. Fire resistant due to all steel material

EUR 19.26

1

Express Nails 8 x 130mm (Box of 100)

Express Nails 8 x 130mm (Box of 100)

Made of high-grade steel; no screwing required; for use in concrete, solid brick, blocks, natural stone, sandstone and bison slabs. Fast and easy to use - just drill hole and hammer in. Fire resistant due to all steel material

EUR 17.83

1

Express Nails 8 x 110mm (Box of 100)

Express Nails 8 x 110mm (Box of 100)

Made of high-grade steel; no screwing required; for use in concrete, solid brick, blocks, natural stone, sandstone and bison slabs. Fast and easy to use - just drill hole and hammer in. Fire resistant due to all steel material

EUR 17.12

1

Stay Fresh Anti Mould Sanitary Ice White Silicone 300ml

Stay Fresh Anti Mould Sanitary Ice White Silicone 300ml

<p>STAY FRESH - eliminates all problems associated with traditional sealants when used in areas of high humidity - a permanent end to unsightly mould and fungus, discolouration, adhesion problems and bad odours. Stay Fresh is the ultimate anti-mould shower and bathroom sealant. Prevents mould, fungus, discolouration, and bad odours when used in areas of high humidity. Contains a powerful dual action fungicide and biocide. Does not contain or release acids. Can be used safely in kitchen are

EUR 10.70

1

Tornado Through Bolt M8 x 80mm (Box of 50)

Tornado Through Bolt M8 x 80mm (Box of 50)

Tornado Throughbolts are high performance and versatile through fixings for use in a wide range of applications in concrete of 20N/mm2 and over. No need for marking out, just drill the hole through the fixture. Typical Applications include:- Cladding Restraint- Curtain wall- Barriers- Handrails- Racking- Structural steel- Bollards

EUR 10.42

1

Shot Fire Nails 82mm (Box of 100)

Shot Fire Nails 82mm (Box of 100)

Nails are designed especially for use in the DX450 and the EXP88. This nail is for use in concrete. The length of nail to use should be the thickness of the material to be fixed PLUS: Concrete: 25 - 32 mm penetration NB: Use HRA Red Cartridge with this nail.

EUR 11.41

1

Tornado Through Bolt M10 x 75mm (Box of 50)

Tornado Through Bolt M10 x 75mm (Box of 50)

Tornado Throughbolts are high performance and versatile through fixings for use in a wide range of applications in concrete of 20N/mm2 and over. No need for marking out, just drill the hole through the fixture. Typical Applications include:- Cladding Restraint- Curtain wall- Barriers- Handrails- Racking- Structural steel- Bollards

EUR 18.55

1

Tornado Through Bolt M12 x 80mm (Box of 25)

Tornado Through Bolt M12 x 80mm (Box of 25)

Tornado Throughbolts are high performance and versatile through fixings for use in a wide range of applications in concrete of 20N/mm2 and over. No need for marking out, just drill the hole through the fixture. Typical Applications include:- Cladding Restraint- Curtain wall- Barriers- Handrails- Racking- Structural steel- Bollards

EUR 16.24

1

Tornado Through Bolt M12 x 100mm (Box of 25)

Tornado Through Bolt M12 x 100mm (Box of 25)

Tornado Throughbolts are high performance and versatile through fixings for use in a wide range of applications in concrete of 20N/mm2 and over. No need for marking out, just drill the hole through the fixture. Typical Applications include:- Cladding Restraint- Curtain wall- Barriers- Handrails- Racking- Structural steel- Bollards

EUR 16.38

1

Shot Fire Nails 97mm (Box of 100)

Shot Fire Nails 97mm (Box of 100)

Nails are designed especially for use in the DX450 and the EXP88. This nail is for use in concrete. The length of nail to use should be the thickness of the material to be fixed PLUS: Concrete: 25 - 32 mm penetration NB: Use HRA Red Cartridge with this nail.

EUR 19.36

1

Shot Fire Nails 54mm (Box of 100)

Shot Fire Nails 54mm (Box of 100)

Nails are designed especially for use in the DX450 and the EXP88. This nail is for use in concrete. The length of nail to use should be the thickness of the material to be fixed PLUS: Concrete: 25 - 32 mm penetration NB: Use HRA Red Cartridge with this nail.

EUR 10.49

1

Tornado Through Bolt M12 x 120mm (Box of 25)

Tornado Through Bolt M12 x 120mm (Box of 25)

Tornado Throughbolts are high performance and versatile through fixings for use in a wide range of applications in concrete of 20N/mm2 and over. No need for marking out, just drill the hole through the fixture. Typical Applications include:- Cladding Restraint- Curtain wall- Barriers- Handrails- Racking- Structural steel- Bollards

EUR 17.69

1

TEC7 CA Clean 1lt

TEC7 CA Clean 1lt

CA Clean removes rust, lime scale and cement residue. It's safe on stainless steel, rubber, ceramics and synthetics, also it is H.A.C.C.P (food) safe certified. CA Clean is ready to use in this foam trigger. Because of foam formation it may take longer to settle in.

EUR 17.83

1

Tornado Through Bolt M12 x 140mm (Box of 25)

Tornado Through Bolt M12 x 140mm (Box of 25)

Tornado Throughbolts are high performance and versatile through fixings for use in a wide range of applications in concrete of 20N/mm2 and over. No need for marking out, just drill the hole through the fixture. Typical Applications include:- Cladding Restraint- Curtain wall- Barriers- Handrails- Racking- Structural steel- Bollards

EUR 19.97

1

Shot Fire Nails 72mm (Box of 100)

Shot Fire Nails 72mm (Box of 100)

Nails are designed especially for use in the DX450 and the EXP88. This nail is for use in concrete. The length of nail to use should be the thickness of the material to be fixed PLUS: Concrete: 25 - 32 mm penetration NB: Use HRA Red Cartridge with this nail.

EUR 10.34

1

Shot Fire Nails 57mm (Box of 100)

Shot Fire Nails 57mm (Box of 100)

Nails are designed especially for use in the DX450 and the EXP88. This nail is for use in concrete. The length of nail to use should be the thickness of the material to be fixed PLUS: Concrete: 25 - 32 mm penetration NB: Use HRA Red Cartridge with this nail.

EUR 12.13

1

Bosch T118EFS Jigsaw Blades Inox Type (Pack of 5)

Bosch T118EFS Jigsaw Blades Inox Type (Pack of 5)

These Bosch Jigsaw blades are made from BIM and provide a proven, high level of quality for any application with Inox The wavy set, milled tooth design of these blades make them well suited for sawing in Inox (1.5-4mm) and stainless steel These blades come in a pack of 5

EUR 11.98

1

Bosch T118GFS Jigsaw Blades Inox Type (Pack of 5)

Bosch T118GFS Jigsaw Blades Inox Type (Pack of 5)

These Bosch Jigsaw blades are made from BIM and provide a proven, high level of quality for any application with Inox The wavy set, milled tooth design on these blades are perfectly suited for sawing in Inox (0.5-1.5mm) and stainless steel These blades come in a pack of 5

EUR 11.98

1

Stanley DynaGrip 1.6mm Nail Punch

Stanley DynaGrip 1.6mm Nail Punch

Grip is slip-resistant in all weather conditions and ribbed to absorb shock, improving precision Long length enables user to set nails in hard-to-reach areas Fully hardened, precision-milled steel for long life Long, beveled tip for easy nail head alignment Color coded by tip size for quick identification Patented design developed for professional use

EUR 10.56

1

25mm x 280mm SDS Max Chisel

25mm x 280mm SDS Max Chisel

For a wide variety of chisel and demolition jobs in brickwork, concrete and stone.

EUR 14.27

1

Heller SDS Plus Drill Bit 20 x 300mm

Heller SDS Plus Drill Bit 20 x 300mm

Fast and effective not - not only in concrete. Features: Long service life and low probability of breakage even on impact with reinforcements. Tungsten carbide cutting edge with cutting tooth profile for effective grindingof the drilling material. High speed drilling thanks to wide Twinmax spiral. Optimum low-vibration drilling protects the user. Suitable for use in: Concrete Concrete reinforcement Gas concrete Granite Sand-lime brick Clinker Aerated co

EUR 16.49

1

Heller SDS Plus Drill Bit 16 x 450mm

Heller SDS Plus Drill Bit 16 x 450mm

Fast and effective not - not only in concrete. Features: Long service life and low probability of breakage even on impact with reinforcements. Tungsten carbide cutting edge with cutting tooth profile for effective grindingof the drilling material. High speed drilling thanks to wide Twinmax spiral. Optimum low-vibration drilling protects the user. Suitable for use in: Concrete Concrete reinforcement Gas concrete Granite Sand-lime brick Clinker Aerated co

EUR 12.60

1