31 results (0,13074 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Rota-Tip straight 12.7 mm diameter

Rota-Tip straight 12.7 mm diameter

Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Refs. RT

EUR 99.30
1

Heller SDS Plus Drill Bit 22 x 1000mm

Heller SDS Plus Drill Bit 22 x 1000mm

Fast and effective not - not only in concrete. Features: Long service life and low probability of breakage even on impact with reinforcements. Tungsten carbide cutting edge with cutting tooth profile for effective grindingof the drilling material. High speed drilling thanks to wide Twinmax spiral. Optimum low-vibration drilling protects the user. Suitable for use in: Concrete Concrete reinforcement Gas concrete Granite Sand-lime brick Clinker Aerated co

EUR 63.90
1

2R2 Rockite Anchoring 50lb Box

2R2 Rockite Anchoring 50lb Box

ROCKITE and KWIXSET are fast setting, of more than twice the strength of fully cured conventional concrete. When mixed with water to pourable consistency they flow and seep into place as though they were molten lava. Both products have an initial set with in 15-20 minutes. With in one hour they will develop compression strengths of 31Mpa or 4500 psi. Its adhesion is due to expansion (hydraulic forces against exterior walls of drilled holes etc) and when fully set it grips metal to concrete perma

EUR 92.53
1

2R2 Rockite Anchoring 50lb Pail

2R2 Rockite Anchoring 50lb Pail

ROCKITE and KWIXSET are fast setting, of more than twice the strength of fully cured conventional concrete. When mixed with water to pourable consistency they flow and seep into place as though they were molten lava. Both products have an initial set with in 15-20 minutes. With in one hour they will develop compression strengths of 31Mpa or 4500 psi. Its adhesion is due to expansion (hydraulic forces against exterior walls of drilled holes etc) and when fully set it grips metal to concrete perma

EUR 92.53
1

Armeg 22mm LDX Metal Cutting Holesaw Long Series

Armeg 22mm LDX Metal Cutting Holesaw Long Series

The Ultimate Solution to Drilling Thick and Thin Metal The perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. Available in short series, ideal for cutting steel plate, iron, aluminium, copper, cast iron, stainless, FRP (i.e. fibreglass) and plastics up to 4.75mm thick. Long series available for cutting pipe, thick steel, steel plate, iron, aluminium, copper, cast iron, and stainless steel up to 25mm thick. Speed - LDX metal

EUR 74.66
1

Armeg 14mm LDX Metal Cutting Holesaw Long Series

Armeg 14mm LDX Metal Cutting Holesaw Long Series

The Ultimate Solution to Drilling Thick and Thin Metal The perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. Available in short series, ideal for cutting steel plate, iron, aluminium, copper, cast iron, stainless, FRP (i.e. fibreglass) and plastics up to 4.75mm thick. Long series available for cutting pipe, thick steel, steel plate, iron, aluminium, copper, cast iron, and stainless steel up to 25mm thick. Speed - LDX metal

EUR 73.72
1

Craft saw blade aluminium and plastic 160 x 52 teeth x 20

Craft saw blade aluminium and plastic 160 x 52 teeth x 20

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 59.80
1

Armeg 30mm LDX Metal Cutting Holesaw Long Series

Armeg 30mm LDX Metal Cutting Holesaw Long Series

The Ultimate Solution to Drilling Thick and Thin Metal The perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. Available in short series, ideal for cutting steel plate, iron, aluminium, copper, cast iron, stainless, FRP (i.e. fibreglass) and plastics up to 4.75mm thick. Long series available for cutting pipe, thick steel, steel plate, iron, aluminium, copper, cast iron, and stainless steel up to 25mm thick. Speed - LDX metal

EUR 83.14
1

Armeg 38mm LDX Metal Cutting Holesaw Long Series

Armeg 38mm LDX Metal Cutting Holesaw Long Series

The Ultimate Solution to Drilling Thick and Thin Metal The perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. Available in short series, ideal for cutting steel plate, iron, aluminium, copper, cast iron, stainless, FRP (i.e. fibreglass) and plastics up to 4.75mm thick. Long series available for cutting pipe, thick steel, steel plate, iron, aluminium, copper, cast iron, and stainless steel up to 25mm thick. Speed - LDX metal

EUR 99.65
1

Craft saw blade 315mm x 48 teeth x 30mm

Craft saw blade 315mm x 48 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality.

EUR 68.33
1

Craft saw blade aluminium and plastic 250mm x 84 teeth x 30mm

Craft saw blade aluminium and plastic 250mm x 84 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 79.72
1

Craft saw blade aluminium and plastic 216mm x 64 teeth x 30mm

Craft saw blade aluminium and plastic 216mm x 64 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 62.64
1

Craft saw blade crosscut 260mm x 72 teeth x 30mm

Craft saw blade crosscut 260mm x 72 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy

EUR 60.22
1

Armeg 25mm LDX Metal Cutting Holesaw Long Series

Armeg 25mm LDX Metal Cutting Holesaw Long Series

The Ultimate Solution to Drilling Thick and Thin Metal The perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. Available in short series, ideal for cutting steel plate, iron, aluminium, copper, cast iron, stainless, FRP (i.e. fibreglass) and plastics up to 4.75mm thick. Long series available for cutting pipe, thick steel, steel plate, iron, aluminium, copper, cast iron, and stainless steel up to 25mm thick. Speed - LDX metal

EUR 74.03
1

Craft saw blade 250mm x 48 teeth x 30mm

Craft saw blade 250mm x 48 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality.

EUR 55.16
1

Armeg 32mm LDX Metal Cutting Holesaw Long Series

Armeg 32mm LDX Metal Cutting Holesaw Long Series

The Ultimate Solution to Drilling Thick and Thin Metal The perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. Available in short series, ideal for cutting steel plate, iron, aluminium, copper, cast iron, stainless, FRP (i.e. fibreglass) and plastics up to 4.75mm thick. Long series available for cutting pipe, thick steel, steel plate, iron, aluminium, copper, cast iron, and stainless steel up to 25mm thick. Speed - LDX metal

EUR 91.82
1

Craft saw blade aluminium and plastic 300 x 96 teeth x 30

Craft saw blade aluminium and plastic 300 x 96 teeth x 30

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 93.96
1

Craft saw blade 250mm x 60 teeth x 30mm

Craft saw blade 250mm x 60 teeth x 30mm

Sawblades designed for a professional finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer and hardboard. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision

EUR 56.94
1

Craft saw blade aluminium and plastic 305mm x 84 teeth x 30mm

Craft saw blade aluminium and plastic 305mm x 84 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic and alloy. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. For alloy cutti

EUR 80.44
1

Fentrim adhesive tape

Fentrim adhesive tape

Fentrim® 20 The pre-folded, robust adhesive tape can be plastered over and is especially suitable for connection with windows and door frames to seal component joints in solid structures and metal structures indoors. Features Extremely high adhesive strength on entire surface Easy to apply, immediately 100% tight 15 mm pre-folded, without backing strip Fastest bonding to window frames Non-woven with perforated zone suited for plastering-over Strong plaster adhesion on mason

EUR 98.23
1

Craft saw blade 350mm x 64 teeth x 30mm

Craft saw blade 350mm x 64 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality.

EUR 88.12
1

Craft saw blade crosscut 250mm x 42 teeth x 30mm

Craft saw blade crosscut 250mm x 42 teeth x 30mm

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy

EUR 51.25
1

Armeg 32mm LDX Metal Cutting Holesaw Short Series

Armeg 32mm LDX Metal Cutting Holesaw Short Series

The Ultimate Solution to Drilling Thick and Thin Metal The perfect, portable tool for the professional electrician, plumber, mechanic, fabricator and general contractor. Available in short series, ideal for cutting steel plate, iron, aluminium, copper, cast iron, stainless, FRP (i.e. fibreglass) and plastics up to 4.75mm thick. Long series available for cutting pipe, thick steel, steel plate, iron, aluminium, copper, cast iron, and stainless steel up to 25mm thick. Speed - LDX metal

EUR 55.60
1