40 results (0,12160 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

NORMA TORRO 16-27/12 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 16-27/12 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 136 7704 021 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 1.47
1

NORMA TORRO 20-32/12 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 20-32/12 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 136 7704 026 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 1.70
1

NORMA GBS M19-21/18 Sk* Super Clamp (Pack of 1)

NORMA GBS M19-21/18 Sk* Super Clamp (Pack of 1)

The NORMACLAMP GBS is designed primarily for use in applications where hose clamps must meet stringent requirements. In particular if suction and pressure hoses - complete with plastic or steel inserts and high shore hardness values - are to be connected and attached. They are therefore particularly suitable for use on commercial and special vehicles. Part Number: 0591 7181 020 The NORMACLAMP GBS is designed primarily for use in applications where hose clamps must meet stringent requirements. In particular if suction and pressure hoses - complete with plastic or steel inserts and high shore hardness values - are to be connected and attached. They are therefore particularly suitable for use on commercial and special vehicles. The standout feature of the NORMACLAMP GBS Super Clamp is the exceptionally high levels of band tensile force they demonstrate. NORMACLAMP GBS clamps are also extremely easy to install, whether you're using manual, pneumatic or electrical standard tools. Material: W1 (All parts made entirely from galvanized steel).

EUR 1.17
1

NORMA TORRO 25-40/9 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 25-40/9 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 126 7704 032 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 1.00
1

NORMA TORRO 16-27/9 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 16-27/9 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 126 7704 021 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 1.17
1

NORMA TORRO 20-32/9 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 20-32/9 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 126 7704 026 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. Therefore, the TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 1.93
1

NORMA GBS M17-19/18 Sk* Super Clamp (Pack of 1)

NORMA GBS M17-19/18 Sk* Super Clamp (Pack of 1)

The NORMACLAMP GBS is designed primarily for use in applications where hose clamps must meet stringent requirements. In particular if suction and pressure hoses - complete with plastic or steel inserts and high shore hardness values - are to be connected and attached. They are therefore particularly suitable for use on commercial and special vehicles. Part Number: 0591 7181 018 The NORMACLAMP GBS is designed primarily for use in applications where hose clamps must meet stringent requirements. In particular if suction and pressure hoses - complete with plastic or steel inserts and high shore hardness values - are to be connected and attached. They are therefore particularly suitable for use on commercial and special vehicles. The standout feature of the NORMACLAMP GBS Super Clamp is the exceptionally high levels of band tensile force they demonstrate. NORMACLAMP GBS clamps are also extremely easy to install, whether you're using manual, pneumatic or electrical standard tools. Material: W1 (All parts made entirely from galvanized steel).

EUR 1.17
1

NORMA TORRO 35-50/12 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 35-50/12 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 136 7704 043 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 2.00
1

NORMA TORRO 60-80/12 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 60-80/12 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 136 7704 070 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 3.00
1

NORMA GBS M21-23/18 Sk* Super Clamp (Pack of 1)

NORMA GBS M21-23/18 Sk* Super Clamp (Pack of 1)

The NORMACLAMP GBS is designed primarily for use in applications where hose clamps must meet stringent requirements. In particular if suction and pressure hoses - complete with plastic or steel inserts and high shore hardness values - are to be connected and attached. They are therefore particularly suitable for use on commercial and special vehicles. Part Number: 0591 7181 022 The NORMACLAMP GBS is designed primarily for use in applications where hose clamps must meet stringent requirements. In particular if suction and pressure hoses - complete with plastic or steel inserts and high shore hardness values - are to be connected and attached. They are therefore particularly suitable for use on commercial and special vehicles. The standout feature of the NORMACLAMP GBS Super Clamp is the exceptionally high levels of band tensile force they demonstrate. NORMACLAMP GBS clamps are also extremely easy to install, whether you're using manual, pneumatic or electrical standard tools. Material: W1 (All parts made entirely from galvanized steel).

EUR 2.20
1

NORMA TORRO 12-22/9 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 12-22/9 (W4) Hose Clamp (Pack of 1)

The TORRO hose clamp from NORMA is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 126 7704 017 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. Therefore, the TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 1.17
1

NORMA TORRO 50-70/12 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 50-70/12 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 136 7704 060 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 2.34
1

NORMA GBS M23-25/18 Sk* Super Clamp (Pack of 1)

NORMA GBS M23-25/18 Sk* Super Clamp (Pack of 1)

The NORMACLAMP GBS is designed primarily for use in applications where hose clamps must meet stringent requirements. In particular if suction and pressure hoses - complete with plastic or steel inserts and high shore hardness values - are to be connected and attached. They are therefore particularly suitable for use on commercial and special vehicles. Part Number: 0591 7181 024 The NORMACLAMP GBS is designed primarily for use in applications where hose clamps must meet stringent requirements. In particular if suction and pressure hoses - complete with plastic or steel inserts and high shore hardness values - are to be connected and attached. They are therefore particularly suitable for use on commercial and special vehicles. The standout feature of the NORMACLAMP GBS Super Clamp is the exceptionally high levels of band tensile force they demonstrate. NORMACLAMP GBS clamps are also extremely easy to install, whether you're using manual, pneumatic or electrical standard tools. Material: W1 (All parts made entirely from galvanized steel).

EUR 1.98
1

NORMA TORRO 70-90/12 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 70-90/12 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 136 7704 080 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 2.68
1

NORMA TORRO 25-40/12 (W4) Hose Clamp (Pack of 1)

NORMA TORRO 25-40/12 (W4) Hose Clamp (Pack of 1)

The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304). Part Number: 136 7704 032 The NORMACLAMP TORRO standard hose clamp is equipped with a spring insert on the inside of the clamp band. When tightening the screw the spring is loaded and stores sufficient clamping force to ensure a long-lasting automatic re-tensioning effect. Thus the radial clamping force achieved will be sufficient even under extremely low temperatures. The TORRO is an optimal solution for applications under extreme temperature changes (e.g., charged air) or for the retention of hoses with a tendency of 'creeping' (hose relaxation). Material: W4 (All parts made entirely from stainless steel AISI 304).

EUR 3.70
1