ProfitSpring | B2B PPC Agency

Karcher Filter set Allergy Solution for AF100 x2

Effective allergy filter set for the Karcher AF 100 air purifier.

EUR 193.80

1

Sealey TATL Automotive Test Lead & Crocodile Clip Set 6pc

Set of 1.35m automotive test leads with Ø4mm banana style connectors. Used for testing and diagnosing faults in electronic circuits. Suitable for use with most multimeters and analysers.

EUR 34.40

1

Sealey VSE211 Fuel Injection Pressure Test Kit - Test Port

Comprehensive kit of adaptors and fittings for modern Schrader test port fuel injection systems. Components fitted with quick coupling system and safety valve to prevent inadvertent discharge of fuel under pressure. Supplied with large high pressure gauge reading 0-145psi and 0-1000kPa. Gauge has hanging hook and protective bumper. Pressure release valve fitted with long drain hose allows safe recovery of fuel. Supplied in storage case.

EUR 82.99

1

Sealey VS216 Diesel High Pressure Pump Test Kit

Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems. Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses. The kit also includes a set of dummy pump regulator and injector pipe blanks. Kit allows for a variety of tests to be conducted: - Engine cranking/running pressure test - Maximum pump pressure test - Pump pressure regulator test - Injector leakage test.

EUR 1300.00

1

Sealey VS932 Air Brake Test Gauge Set - Commercial

Locate problems relating to commercial vehicle air brake pressure quickly and easily. Three gauges provide more accurate diagnosis when testing and locating faults along the braking system. Suitable for use at the roadside or in the workshop. Features three large 0-20bar(0-300psi) gauges with rubber bumper. Supplied with male/female couplings, three hoses and a wire brush in storage case.

EUR 345.23

1

Sealey VS006F Coolant Pressure Test Cap - Ford/Volvo

Coolant pressure test cap. Use with Model No's VS001, VS0011, VS0012, VS0013, VS0014, VS006, VS0061 or VS0033 testing kit.

EUR 26.38

1

Sealey VS006V Coolant Pressure Test Cap - Vauxhall/Opel

Coolant pressure test cap. Use with Model No's VS001, VS0011, VS0012, VS0013, VS0014, VS006, VS0061 or VS0033 testing kit.

EUR 37.82

1

Sealey PPVT Automotive Test Probe

Time-saving tool ideal for the automotive electrician and mechanic. Connects to the vehicle’s own battery and reaches all corners of the vehicle with 5m cable. Checks for short circuits and bad earths quickly and easily. Tests continuity and polarity using flying lead and also indicates voltage (2V to 24V) of system on test using an LED array. Power-up components prior to installation and check in situ function of components and accessories allowing fast problem diagnosis. Features integral work light with touch sensitive control.

EUR 49.34

1

Sealey VSE206 Petrol Compression Test Kit 10pc

Ø59mm Gauge fitted with 250mm hose and quick connect. Scale reads from 0-21bar(0-300psi). Kit includes four extension hoses, seven plug thread adaptors from 10 to 18mm and a self-sealing quick connector. Suitable for most petrol engine cars and light commercials. Supplied in storage case.

EUR 139.01

1

Sealey PFT07 Brake Pipe Flaring Kit - Turret Type

Produces accurate automotive double flares on most common sizes of brake pipe. Cam-action body mounts in bench vice for ease of use. Includes dies and clamp blocks for forming most popular flares. Optional 3/8" clamp block available. Supplied in storage case.

EUR 304.12

1

3M HF-800-03 Secure Click Quantitive Fit Test Adapter Kit

This Secure Click quantitive fit test adapter kit is designed for use with HF800 series half mask respirators.

EUR 138.09

1

Sealey VSE3155 Petrol & Diesel - Master Compression Test Kit

A comprehensive kit for testing the compression on both diesel and petrol vehicles. Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors. This kit will cover most modern car, van, truck, bus, agricultural and marine engines. Supplied in storage case. See instructions on Sealey website for complete vehicle applications.

EUR 328.94

1

Sealey VS006 Cooling System Pressure Test Kit 16pc

Heavy-duty pressure test kit. Aluminium radiator header tank caps are colour-coded for ease of use and have quick release fittings. Suitable for a wide range of vehicle applications.Locate system leaks from:• Head gasket• Header tank• Radiator and heater cores• Water pump, plugs, hoses and housingsHeavy-duty pump unit features smooth action and large, easy-to-read, scale. Long hose aids easy use of the gauge and quick release is fitted with pressure release valve for safe operation. Set supplied with thermometer and packed in storage case.

EUR 340.80

1

Sealey PFT/02 Brake Pipe Flaring Kit 3/16 SAE

Simple and accurate production of automotive type double flares. Cam-action body fits into bench vice. Supplied with 3/16" SAE and 4.75mm DIN dies for most popular flares. Other sizes available on request. Suitable for steel pipes and supplied in storage case with full instructions and die listing.

EUR 242.00

1

Sealey TA090 Paint Thickness Gauge

For the professional bodyshop or valeting bay to accurately verify the thickness of paint and check for accident damage. Uses magnetic induction to provide accurate and consistent readings to 0.1µm. Suitable for steel and aluminium panels. Easy to calibrate with test plates and precision standards. USB Interface for downloading data to PC. Powered by 2 x 1.5V batteries (supplied).

EUR 331.20

1

Sealey TA202 Digital Automotive Analyser 14-Function with Inductive Coupler

Extra-large, high-contrast LCD display with 36mm high digital read-out and back light. Durable case and integral stand suitable for the toughest workshop conditions. Features millisecond pulse-width function for accurate measurement of fuel injection systems. Includes auto-ranging, data-hold and auto-power-off. Supplied with inductive coupler (IC), test probes, thermocouple and storage case.

EUR 128.86

1

Sealey STW291 Torque Adaptor with Angle Function Digital 1/2"Sq Drive 20-200Nm(14.7-147.5lb.ft)

Designed for use with a standard ratchet or breaker bar. Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications. Large LCD display with LED/audible alarm indicating achieved and target torque levels. Selectable readings in Nm, lb.ft, lb.in or kgf.m. Accurate to ±2% of stated capacity and operates in either direction. Features angle mode, eliminating the need for angle gauges and protractors providing an accurate and fast way to measure torque plus angle tightening sequences. Will also accumulate angle measurement when multiple turns are required, ideal for use where access is restricted. Includes auto shut-off. Supplied with test certificate and storage case.

EUR 106.30

1

Sealey HBS97.HGV Headlamp Beam Setter with Rails & Commercial Aiming Screen

DVSA Approved for use in testing stations. Classes: I, II, III, IV, V, VI, VII, HGV. Suitable for all types of motorcycles, cars, light commercial, PSV & commercial vehicles. Fixed aiming screen. Internal analogue LUX meter for accurate light intensity measurement. Supplied with rails, instructions and certificate of approval. Only suitable for MOT test stations that are also class VI and HGV certified.

EUR 1870.40

1

Sealey STS103 Screwdriver Torque Digital 0.05-5Nm 1/4"Hex Drive

Suitable for automotive, workshop and factory use. LCD read-out with LED, audible alarm and vibration indicating achieved and target torque levels. Preset track, peak or desired torque levels using simple push-button menu. Clockwise and anticlockwise operation. Selectable read-out in Nm or lb.ft. Accurate to ±1% of stated capacity. Textured, contoured handle for added grip and comfort. Supplied with test certificate.

EUR 72.00

1

Sealey STS104 Torque Screwdriver Digital 0-20Nm 1/4"Hex Drive

Suitable for automotive, workshop and factory use. LCD read-out with LED, audible alarm and vibration indicating achieved and target torque levels. Preset track, peak or desired torque levels using simple push-button menu. Clockwise and anticlockwise operation. Selectable read-out in Nm or lb.ft. Accurate to ±1% of stated capacity. Textured, T-handle for added grip and comfort. Supplied with test certificate.

EUR 91.00

1

Sealey TA302 Digital Automotive Analyser 12-Function with Inductive Coupler

12-Function, auto-ranging automotive diagnostic multimeter. Combination digital/bar graph display gives accurate indication of component outputs. Large, easy-to-read high contrast display with bright, white back light. Workshop-tough, durable case with integral stand. Reads standard automotive parameters including duty cycle. Features auto-ranging and data-hold functions with overload protection on all ranges. Supplied with inductive coupler, test probes and thermocouple.

EUR 127.00

1

Sealey STW306 Angle Torque Wrench Digital 1/2"Sq Drive 20-200Nm (14.7-147.5lb.ft)

Rugged and resilient digital torque wrench suitable for workshop and factory use. LCD read-out with LED, vibration and audible alarms to indicate achieved and target torque levels. Features angle mode, eliminating the need for angle gauges and protractors providing an accurate and fast way to measure torque plus angle tightening sequences. Will also accumulate angle measurement when multiple turns are required, ideal for use where access is limited. Selectable track or peak modes and up to five user preset memories available. Read-outs in Nm, lb.in, lb.ft, kgf.m or degrees. Reversible Chrome Vanadium 72-tooth ratchet allows torque reading in either direction. Accurate to ±2% of wrench's stated capacity. Supplied with test certificate and storage case.

EUR 171.00

1

Sealey STW309 Angle Torque Wrench Flexi-Head Digital 1/2"Sq Drive 20-200Nm(14.7-147.5lb.ft)

Rugged and resilient digital torque wrench suitable for workshop and factory use. LCD read-out with LED, audible alarm and vibration indicating achieved and target torque levels. 180° Flexi-head for increased access in hard-to-reach applications. Features angle mode, eliminating the need for angle gauges and protractors providing an accurate and fast way to measure torque plus angle tightening sequences. Will also accumulate angle measurement when multiple turns are required, ideal for use where access is limited. Selectable track or peak modes and up to five user preset memories available. Read-outs in Nm, lb.in, lb.ft, kgf.m or degrees. Reversible Chrome Vanadium 72-tooth ratchet allows torque reading in either direction. Accurate to ±2% of wrench’s stated capacity. Supplied with test certificate and storage case.

EUR 261.41

1

Sealey STW308 Torque Wrench Digital 3/8"Sq Drive 8-85Nm(5.9-62.7lb.ft)

Rugged and resilient digital torque wrench suitable for workshop and factory use. LCD read-out with LED, audible alarm and vibration indicating achieved and target torque levels. Selectable track or peak modes and up to five user preset memories available. Read-outs in Nm, lb.in, lb.ft or kgf.m. Reversible Chrome Vanadium 72-tooth ratchet allows torque reading in either direction. Accurate to ±2% of wrench’s stated capacity. Supplied with test certificate and storage case.

EUR 229.76

1

Sealey STW307 Torque Wrench Digital 3/8"Sq Drive 2-24Nm(1.48-17.70lb.ft)