1.059 results (0,18570 seconds)

Brand

Colour

Size

Gender

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Vivo Cryowrap Cooler Unit

Vivo Cryowrap Cooler Unit

Vivo Cryowrap Cooler Unit ·    Insulated flask for ice/cold water ·    Gravity fed cryotherapy system delivering cold water and support to joints ·    Integrates with compression wraps to reduce swelling around ankles and knees ·    Provides cold and compression therapy to swollen knee and ankle joints ·    Used as part of the PRICE regime. Protect, Rest, Ice, Compression, Elevation ·    The method is widely used in hospitals post-surgery ·    Available to buy with or without knee or ankle sleeves The product consists of cooler, tube and sleeve (sold separately, or as a combination). The cooler is made of urethane foam and high-density polyethylene plastic, the sleeve is made of polyurethane coated nylon. The Vivo-Cryowrap Cooler Unit is intended to be used for cold therapy on specific parts of human body surface. Instructions for use: 1.Prepare cooler: Connect the blue tube to the cooler. Add water to line inside the cooler, then add ice. For 6 to 8 hour treatment, add ice to top of cooler. Lay the insulation disk on top of ice. Attach cooler lid snugly. Allow 5 minutes with occasional shaking to chill water.  2.Apply the empty sleeve: Use a medical isolation pad between your desired area and the sleeve, Position sleeve on the joint with quick-disconnect pointing down. Thread straps through white rings and secure snugly.  3.Fill sleeve: Connect blue tube to sleeve. Open air vent on cooler lid and raise cooler no more than 15.7 inches(40cm) above the sleeve (if the cooler is raised more than 15.7 inches(40cm), the sleeve will increase in volume and weight.) Hold raised cooler for about 30 seconds while sleeve fills. Close air vent on cooler lid. the cooler can now be disconnected from sleeve by pressing the tab on the quick-disconnect while cooler is raised.  4.Rechill water: At first, rechill the water in the sleeve after 15 or 30 minutes, then once an hour or as needed. Reconnect the blue tube to sleeve. lower the cooler below sleeve, and the warmed water will drain from the sleeve into the cooler. Allow a minute or two for the water to mix with the ice and rechill, then raise the cooler and repeat the filling process. Stock Option: Cooler Unit only, Discounted Ankle Cuff & Cryo Unit, Discounted Knee Cuff & Cooler Unit, Knee Cuff Only, Ankle Cuff Only

EUR 104.54
1

Aircast Cryo/Cuff Cooler IC

Vivo Cryowrap Cooler Unit - 30cm x 13cm - Pack of 40

Vivo Cryowrap Cooler Unit - 30cm x 13cm - Pack of 40

Vivo Cryowrap Cooler Unit ·    Insulated flask for ice/cold water ·    Gravity fed cryotherapy system delivering cold water and support to joints ·    Integrates with compression wraps to reduce swelling around ankles and knees ·    Provides cold and compression therapy to swollen knee and ankle joints ·    Used as part of the PRICE regime. Protect, Rest, Ice, Compression, Elevation ·    The method is widely used in hospitals post-surgery ·    Available to buy with or without knee or ankle sleeves The product consists of cooler, tube and sleeve (sold separately, or as a combination). The cooler is made of urethane foam and high-density polyethylene plastic, the sleeve is made of polyurethane coated nylon. The Vivo-Cryowrap Cooler Unit is intended to be used for cold therapy on specific parts of human body surface. Instructions for use: 1.Prepare cooler: Connect the blue tube to the cooler. Add water to line inside the cooler, then add ice. For 6 to 8 hour treatment, add ice to top of cooler. Lay the insulation disk on top of ice. Attach cooler lid snugly. Allow 5 minutes with occasional shaking to chill water.  2.Apply the empty sleeve: Use a medical isolation pad between your desired area and the sleeve, Position sleeve on the joint with quick-disconnect pointing down. Thread straps through white rings and secure snugly.  3.Fill sleeve: Connect blue tube to sleeve. Open air vent on cooler lid and raise cooler no more than 15.7 inches(40cm) above the sleeve (if the cooler is raised more than 15.7 inches(40cm), the sleeve will increase in volume and weight.) Hold raised cooler for about 30 seconds while sleeve fills. Close air vent on cooler lid. the cooler can now be disconnected from sleeve by pressing the tab on the quick-disconnect while cooler is raised.  4.Rechill water: At first, rechill the water in the sleeve after 15 or 30 minutes, then once an hour or as needed. Reconnect the blue tube to sleeve. lower the cooler below sleeve, and the warmed water will drain from the sleeve into the cooler. Allow a minute or two for the water to mix with the ice and rechill, then raise the cooler and repeat the filling process. Stock Option: Cooler Unit only, Discounted Ankle Cuff & Cryo Unit, Discounted Knee Cuff & Cooler Unit, Knee Cuff Only, Ankle Cuff Only

EUR 104.54
1

HELLY HANSEN Inshore Cup Jacket Orange S

HELLY HANSEN Inshore Cup Jacket Navy M

Vivo Cryowrap Cooler knee cuff - 30cm x 13cm - Pack of 40

Apple Pencil (USB-C) MUWA3ZM/A - White

Vivo Cryowrap Cooler ankle cuff - 30cm x 13cm - Pack of 40

Transcend StoreJet 25M3 USB 3.1 External Hard Drive TS2TSJ25M3S - 2TB

Adler AD 7922 Air cooler 3-in-1

Carlinkit SDM660 Tbox UHD Wireless CarPlay / Android Auto Adapter w. HDMI, USB-C, USB, TF Card Slot

Carlinkit SDM660 Tbox UHD Wireless CarPlay / Android Auto Adapter w. HDMI, USB-C, USB, TF Card Slot

Carlinkit SDM660 Tbox UHD Wireless CarPlay / Android Auto Adapter with HDMI, USB-C, USB, TF Card Slot - 8GB/128GB, OS: Android 13, Bluetooth 5.0\n\nThis product expands the open Android system platform through the car USB interface, supports free installation of APP to achieve richer audio-visual entertainment and navigation functions, supports 4G/GPS/Bluetooth/telephone functions, and supports mobile phone Internet access to realize wireless CarPlay and wireless Android Auto function. Output high-definition images through the HDMI port, connect to other high-definition displays, and switch between split-screen displays without interfering with each other or affecting driving, thereby realizing the fun of sharing high-definition images.\n\nAndroid Link Box facilitates seamless connections to open Android systems, enabling wireless CarPlay and Android Auto connectivity\n\nEnjoy online HD multimedia entertainment with support for streaming high-definition videos and media content\n\nEffortlessly connect to other high-definition displays for crisp and clear output imagery\n\nExperience hassle-free multitasking with split-screen display, allowing for simultaneous usage without interference\n\nRetain original car functionalities such as buttons and knobs for intuitive and immediate operation\n\nSwitch between original car CarPlay and Android Auto channels as needed, ensuring versatile compatibility\n\nSpecification:\n\nPower input: 5V/plusmn;0.2V 2A\n\nProduct power consumption: 6W\n\nWiFi frequency: 802.11a/b/g/n/ac, 2.4G+5G\n\nCPU: Qualcomm SDM660, 4xKryo Gold 2.2(or 2.4)GHz + 4xKryo Silver 1.8GHz\n\nGPU: A512 650MHz\n\nSystem: open Android system\n\nMemory: 8GB running memory + 128GB body memory\n\nWiFi module: WCN3980\n\nMFI: MFI 3959\n\nBluetooth version: 5.0 BR/EDR/BLE\n\nProduct material: ABS\n\nCompatible car units: models with original car/rsquo;s own wired CarPlay/wired Android Auto\n\nResolution: adaptive (maintain original protocol resolution)\n\nLanguage: Multiple languages ​​around the world, (Arabic, Chinese, English, French)\n\nPorts: LED indicator, Type-C female port, TF card holder, USB female port, SIM card holder, HDMI interface\n\nProduct size: 90x84.9x17.1mm\n\nCable: USB-A to USB-C*1, USB-C to USB-C*1, Length=300mm\n\nHD Adapter*1, Length=170mm\n\nTF card supports expansion: 512GB\n\nWireless CarPlay: for iPhone 6 and above/for/nbsp;iOS 10.0 and above\n\nWireless Android Auto: Android phones running Android 11.0 and above\n\nVersion: Eurasian EAU (Asia, European countries)\n\nCellular network format: EAU SIM/Nano SIM/LTE-FDD B1/2/3/4/5/7/8/20/28/LTE-TDD B38/40/41/WCDMA B1/2/3/5/8 /GSM/EDGE 850/900/1800/1900MHz\n\nProduct Certificate:\n\nCertification number: AT18300RC105486\n\nRosh certification\n\nPatent number: ZL202230224097.X\n\nDesign patent\n\nFCC ID:2AYC2-AITBOX\n\nFCC certification\n\nCertificate ID:189005\n\nBluetooth membership certification\n\nCertification number: R210-181448\n\nTELEC certification\n\nCertification number: AT18220WC102475\n\nCMIIT ID: 2022AP9009\n\nCE certification\n\nSRRC certification\n\nCertification ID: CCAH22LP9040T2\n\nNCC certification\n\nNote:\n\nIncorrect card insertion may cause damage to the card slot\n\nUnder normal circumstances, the Android Auto function is not supported in mainland China\n\nInsert the card pin and hold it for about 2-3 seconds to switch to CarPlay (default) or Android Auto mode

EUR 188.50
1

Emil | Leather Backpack with USB, Black-D

Emil | Leather Backpack with USB, Black-C

Emil | Leather Backpack with USB, Black-B

Emil | Leather Backpack with USB, Black-A

EcoZap - USB Rechargeable Solar Mosquito Killer Lamp