ProfitSpring | B2B PPC Agency

Skf valvola di ritegno lapv 1/4"

The SKF LAPV 1/4 accessory is a non-return valve G1/4 for oil lubrication suitable for LAGD and TLSD single point automatic lubricators.

EUR 19.95

1

Skf raccordo lapf 1/4"m x tubo 8 per ingrassatori automatici - lapf-m1/4sw

The SKF LAPF M1/4SW accessory is a Tube connector, male 1/4" for 8 mm tube suitable for LAGD, TLSD and TLMR single point automatic lubricators.

EUR 10.36

1

Skf raccordo lapf 1/4"m x tubo 8 per ingrassatori automatici

The SKF LAPF M1/4 accessory is a tube connector, with male thread G1/4 for the 8mm flexible tube suitable for LAGD, TLSD single point automatic lubricators.

EUR 8.99

1

Skf supporto fyawk 25 lthr

This bearing unit will be discontinued at the end of 2019, and new unit series F3BBC is already available as its replacement.Compliance with standard::Not standardizedHousing material::Composite for the SKF Food LineSealing solution::Multiple sealsDimensionsd:25mmd1:33.74mmA:34mmA1:11.4mmA5:21.5mmB:34.1mmB4:5mmJ:41.3mmJ1:28.6mmH:120.5mmH1:46mmL:70mmL1:63.5mmN:10.7mms1:19.8mmB:41.6mmCalculation dataBasic dynamic load ratingC:11.9kNBasic static load ratingC0:7.8kNFatigue load limitPu:0.335kNLimiting speed::4300r/minwith shaft tolerance h6MassMass bearing unit::0.31kgMounting informationThread grub screwG2:M6x0.75Hexagonal key size for grub screwN:3mmRecommended tightening torque for grub screw::4N·mRecommended diameter for attachment bolts, mmG:10mmRecommended diameter for attachment bolts, inchG:0.375inIncluded productsHousing::FYAWK 505 LBearing::YAR 205-2RFGR/HVAssociated productsEnd cover::ECL 205

EUR 87.67

1

Skf supporto fyc 30 tf

Compliance with standard::JISHousing material::GhisaSealing solution::Standard seals with additional flingersDimensionsd:30mmd1:39.7mmA:31mmA1:8mmA3:8mmB:38.1mmB1:38.1mmB4:5mmDa:80mmDb:81.1mmJ:100mmJ1:70.7mmL:125mmN:12mms1:22.2mmT:32.2mmThreaded holeRG:1/4-28 UNFR1:16.5mmGrease fittingDN:6.5mmSWN:7mmGN:1/4-28 SAE-LTCalculation dataBasic dynamic load ratingC:19.5kNBasic static load ratingC0:11.2kNFatigue load limitPu:0.475kNLimiting speed::6300r/minwith shaft tolerance h6MassMass unit::1.25kgMounting informationThread grub screwG2:M6x0.75Hexagonal key size for grub screwN:3mmRecommended tightening torque for grub screw::4N·mRecommended diameter for attachment bolts, mmG:10mmRecommended diameter for attachment bolts, inchG:0.375inIncluded productsHousing::FYC 506Bearing::YAR 206-2F

EUR 37.62

1

Skf supporto fyc 60 tf

Compliance with standard::JISHousing material::GhisaSealing solution::Standard seals with additional flingersDimensionsd:60mmd1:75.64mmA:48mmA1:15mmA3:12mmB:65.1mmB1:65.1mmB4:10mmDa:135mmDb:137.1mmJ:160mmJ1:113.1mmL:195mmN:19mms1:39.7mmT:56.7mmThreaded holeRG:1/4-28 UNFR1:24.5mmGrease fittingDN:6.5mmSWN:7mmGN:1/4-28 SAE-LTCalculation dataBasic dynamic load ratingC:52.7kNBasic static load ratingC0:36kNFatigue load limitPu:1.53kNLimiting speed::3400r/minwith shaft tolerance h6MassMass unit::4.8kgMounting informationThread grub screwG2:M10x1Hexagonal key size for grub screwN:5mmRecommended tightening torque for grub screw::16.5N·mRecommended diameter for attachment bolts, mmG:16mmRecommended diameter for attachment bolts, inchG:0.625inIncluded productsHousing::FYC 512Bearing::YAR 212-2F

EUR 99.28

1

Skf supporto fyc 45 tf

Compliance with standard::JISHousing material::GhisaSealing solution::Standard seals with additional flingersDimensionsd:45mmd1:56.8mmA:37.5mmA1:14mmA3:12mmB:49.2mmB1:49.2mmB4:8mmDa:105mmDb:106.1mmJ:132mmJ1:93.3mmL:160mmN:16mms1:30.2mmT:40.2mmThreaded holeRG:1/4-28 UNFR1:21mmGrease fittingDN:6.5mmSWN:7mmGN:1/4-28 SAE-LTCalculation dataBasic dynamic load ratingC:33.2kNBasic static load ratingC0:21.6kNFatigue load limitPu:0.915kNLimiting speed::4300r/minwith shaft tolerance h6MassMass unit::2.55kgMounting informationThread grub screwG2:M8x1Hexagonal key size for grub screwN:4mmRecommended tightening torque for grub screw::6.5N·mRecommended diameter for attachment bolts, mmG:14mmRecommended diameter for attachment bolts, inchG:0.5625inIncluded productsHousing::FYC 509Bearing::YAR 209-2F

EUR 60.83

1

Skf supporto fyc 20 tf

Compliance with standard::JISHousing material::GhisaSealing solution::Standard seals with additional flingersDimensionsd:20mmd1:28.2mmA:25.5mmA1:7mmA3:5mmB:31mmB1:31mmB4:4.5mmDa:62mmDb:61mmJ:78mmJ1:55.2mmL:100mmN:12mms1:18.3mmT:28.3mmThreaded holeRG:1/4-28 UNFR1:14.5mmGrease fittingDN:6.5mmSWN:7mmGN:1/4-28 SAE-LTCalculation dataBasic dynamic load ratingC:12.7kNBasic static load ratingC0:6.55kNFatigue load limitPu:0.28kNLimiting speed::8500r/minwith shaft tolerance h6MassMass unit::0.67kgMounting informationThread grub screwG2:M6x0.75Hexagonal key size for grub screwN:3mmRecommended tightening torque for grub screw::4N·mRecommended diameter for attachment bolts, mmG:10mmRecommended diameter for attachment bolts, inchG:0.375inIncluded productsHousing::FYC 504Bearing::YAR 204-2F

EUR 27.39

1

Skf supporto fyc 35 tf

Compliance with standard::JISHousing material::GhisaSealing solution::Standard seals with additional flingersDimensionsd:35mmd1:46.1mmA:33.5mmA1:9mmA3:8mmB:42.9mmB1:42.9mmB4:6mmDa:90mmDb:90.1mmJ:110mmJ1:77.8mmL:135mmN:14mms1:25.4mmT:36.4mmThreaded holeRG:1/4-28 UNFR1:17mmGrease fittingDN:6.5mmSWN:7mmGN:1/4-28 SAE-LTCalculation dataBasic dynamic load ratingC:25.5kNBasic static load ratingC0:15.3kNFatigue load limitPu:0.655kNLimiting speed::5300r/minwith shaft tolerance h6MassMass unit::1.55kgMounting informationThread grub screwG2:M6x0.75Hexagonal key size for grub screwN:3mmRecommended tightening torque for grub screw::4N·mRecommended diameter for attachment bolts, mmG:12mmRecommended diameter for attachment bolts, inchG:0.5inIncluded productsHousing::FYC 507Bearing::YAR 207-2F

EUR 44.04

1

Skf supporto fyc 50 tf

Compliance with standard::JISHousing material::GhisaSealing solution::Standard seals with additional flingersDimensionsd:50mmd1:62.51mmA:39.5mmA1:14mmA3:12mmB:51.6mmB1:51.6mmB4:9mmDa:110mmDb:113.1mmJ:138mmJ1:97.6mmL:165mmN:16mms1:32.6mmT:42.6mmThreaded holeRG:1/4-28 UNFR1:22mmGrease fittingDN:6.5mmSWN:7mmGN:1/4-28 SAE-LTCalculation dataBasic dynamic load ratingC:35.1kNBasic static load ratingC0:23.2kNFatigue load limitPu:0.98kNLimiting speed::4000r/minwith shaft tolerance h6MassMass unit::2.85kgMounting informationThread grub screwG2:M10x1Hexagonal key size for grub screwN:5mmRecommended tightening torque for grub screw::16.5N·mRecommended diameter for attachment bolts, mmG:14mmRecommended diameter for attachment bolts, inchG:0.5625inIncluded productsHousing::FYC 510Bearing::YAR 210-2F

EUR 64.40

1

Skf supporto fyc 40 tf

Compliance with standard::JISHousing material::GhisaSealing solution::Standard seals with additional flingersDimensionsd:40mmd1:51.8mmA:35.5mmA1:9mmA3:10mmB:49.2mmB1:49.2mmB4:8mmDa:100mmDb:100.1mmJ:120mmJ1:84.9mmL:145mmN:14mms1:30.2mmT:41.2mmThreaded holeRG:1/4-28 UNFR1:17mmGrease fittingDN:6.5mmSWN:7mmGN:1/4-28 SAE-LTCalculation dataBasic dynamic load ratingC:30.7kNBasic static load ratingC0:19kNFatigue load limitPu:0.8kNLimiting speed::4800r/minwith shaft tolerance h6MassMass unit::1.85kgMounting informationThread grub screwG2:M8x1Hexagonal key size for grub screwN:4mmRecommended tightening torque for grub screw::6.5N·mRecommended diameter for attachment bolts, mmG:12mmRecommended diameter for attachment bolts, inchG:0.5inIncluded productsHousing::FYC 508Bearing::YAR 208-2F

EUR 51.30

1

Skf supporto vuoto pf 90

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):90.0mmLarghezza di una metà supporto (A2):11.0mmLarghezza superiore (A4):4.0mmAltezza totale (H):155.0mmDiametro spallamento (H2):98.0mmDistance between attachment bolts (J):127.0mmLength of attachment bolt hole (N):13.5mmDati di calcoloCarico radiale ammissibile:9.0kNMassaMassa alloggiamento:0.83kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:12.0mmRecommended diameter for attachment bolts, inch:0.5in

EUR 11.37

1

Skf supporto vuoto pf 85

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):85.0mmLarghezza di una metà supporto (A2):10.5mmLarghezza superiore (A4):3.5mmAltezza totale (H):149.0mmDiametro spallamento (H2):92.0mmDistance between attachment bolts (J):120.6mmLength of attachment bolt hole (N):13.5mmDati di calcoloCarico radiale ammissibile:8.3kNMassaMassa alloggiamento:0.69kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:12.0mmRecommended diameter for attachment bolts, inch:0.5in

EUR 8.53

1

Skf supporto vuoto pft 80

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):80.0mmLarghezza di una metà supporto (A2):10.0mmSpessore materiale (A4):3.5mmAltezza totale (H):148.0mmDiametro spallamento (H2):87.0mmDistance between attachment bolts (J):119.0mmAltezza totale (L):104.0mmDiameter of attachment bolt hole (N):13.5mmDati di calcoloCarico radiale ammissibile:7.5kNMassaMassa alloggiamento:0.36kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:12.0mmRecommended diameter for attachment bolts, inch:0.5in

EUR 9.09

1

Skf supporto vuoto pf 80

DIMENSIONI D 80 mm Da min. 87 mm A1 3.5 mm A2 10 mm J 119 mm H 148 mm N 13.5 mm DATI DI CALCOLO Carico radiale ammissibile max. 7.5 kN MASSA Massa alloggiamento 0.7 kg INFORMAZIONI DI MONTAGGIO Recommended diameter for attachment bolts, mm G 12 mm Recommended diameter for attachment bolts, inch G 0.5 in

EUR 8.19

1

Skf supporto vuoto pft 72

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):72.0mmLarghezza di una metà supporto (A2):10.0mmSpessore materiale (A4):2.5mmAltezza totale (H):122.0mmDiametro spallamento (H2):77.0mmDistance between attachment bolts (J):100.0mmAltezza totale (L):94.0mmDiameter of attachment bolt hole (N):11.0mmDati di calcoloCarico radiale ammissibile:6.5kNMassaMassa alloggiamento:0.2kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:10.0mmRecommended diameter for attachment bolts, inch:0.375in

EUR 6.86

1

Fip flangia libera oab dn15 d20 rivestita pp+fpr ansi 150

OAB Steel core backing ring, PP/FRP coated, according to ANSI B16.5 cl.150 for stubs QBM and QBAM

EUR 27.88

1

Skf supporto vuoto pfd 62

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):62.0mmLarghezza di una metà supporto (A2):9.5mmLarghezza superiore (A4):2.5mmAltezza totale (H):112.0mmDistanza da bordo dritto a centro sede cuscinetto (H1):38.0mmDiametro spallamento (H2):67.0mmDistance between attachment bolts (J):90.5mmLength of attachment bolt hole (N):11.0mmDati di calcoloCarico radiale ammissibile:5.0kNMassaMassa alloggiamento:0.18kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:10.0mmRecommended diameter for attachment bolts, inch:0.375in

EUR 5.58

1

Skf supporto p 85

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):85.0mmLarghezza base (A):45.0mmTop width (A1):31.0mmAltezza centrale sede sferica (H):46.5mmFoot height (H1):6.0mmAltezza totale (H2):92.0mmDistance between attachment bolts (J):128.0mmAltezza totale (L):156.0mmLunghezza del foro per bullone di fissaggio (N):14.0mmDati di calcoloCarico radiale ammissibile:4.2kNMassaMassa alloggiamento:0.42kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:12.0mmRecommended diameter for attachment bolts, inch:0.5in

EUR 7.87

1

Skf supporto vuoto pfd 47

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):47.0mmLarghezza di una metà supporto (A2):8.0mmLarghezza superiore (A4):2.0mmAltezza totale (H):90.0mmDistanza da bordo dritto a centro sede cuscinetto (H1):32.0mmDiametro spallamento (H2):51.0mmDistance between attachment bolts (J):71.4mmLength of attachment bolt hole (N):8.7mmDati di calcoloCarico radiale ammissibile:3.3kNMassaMassa alloggiamento:0.11kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:8.0mmRecommended diameter for attachment bolts, inch:0.3125in

EUR 4.38

1

Skf supporto vuoto p 72

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):72.0mmLarghezza base (A):41.0mmTop width (A1):27.0mmAltezza centrale sede sferica (H):39.3mmFoot height (H1):5.0mmAltezza totale (H2):78.0mmDistance between attachment bolts (J):106.0mmAltezza totale (L):130.0mmLunghezza del foro per bullone di fissaggio (N):11.2mmDati di calcoloCarico radiale ammissibile:3.3kNMassaMassa alloggiamento:0.27kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:10.0mmRecommended diameter for attachment bolts, inch:0.375in

EUR 6.34

1

Skf supporto p 80

Materiali:Acciaio stampatoDimensioniDiametro della sede sferica (Da):80.0mmLarghezza base (A):43.0mmTop width (A1):29.0mmAltezza centrale sede sferica (H):43.6mmFoot height (H1):5.0mmAltezza totale (H2):86.0mmDistance between attachment bolts (J):120.0mmAltezza totale (L):148.0mmLunghezza del foro per bullone di fissaggio (N):14.0mmDati di calcoloCarico radiale ammissibile:3.8kNMassaMassa alloggiamento:0.31kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:12.0mmRecommended diameter for attachment bolts, inch:0.5in

EUR 7.80

1

Skf raccordo lape 35 m/f 1/4

The SKF LAPE 35 accessory is an extension of 35 mm long suitable for LAGD, TLSD, TLMR single point automatic lubricators.

EUR 7.78

1

Skf supporto fyj 505

Materiali:GhisaDimensioniDiametro della sede sferica (Da):52.0mmDiametro esterno superiore (Db1):66.0mmDiametro esterno base (Db2):72.0mmCentring diameter (Dc):74.6mmLarghezza totale (A):27.0mmFlange width (A1):12.0mmAxial position of spherical seat (from support surface) (A2):16.0mmDepth of centring recess (A3):3.2mmDistance between attachment bolts (J):70.0mmAltezza totale (L):95.0mmDiameter of attachment bolt hole (N):12.0mmMassaMassa alloggiamento:0.51kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:10.0mmRecommended diameter for attachment bolts, inch:0.375in

EUR 10.49

1

Skf supporto vuoto syj 511

Materiali:GhisaDimensioniDiametro della sede sferica (Da):100.0mmLarghezza base (A):60.0mmTop width (A1):40.0mmAltezza centrale sede sferica (H):63.5mmFoot height (H1):24.0mmAltezza totale (H2):126.0mmDistance between attachment bolts (J):171.5mmDistance between attachment bolts (J):180.0mmDistance between attachment bolts (J):163.0mmAltezza totale (L):219.0mmWidth of attachment bolt hole (N):20.0mmLength of attachment bolt hole (N1):28.5mmMassaMassa alloggiamento:2.45kgInformazioni di montaggioRecommended diameter for attachment bolts, mm:16.0mmRecommended diameter for attachment bolts, inch:0.625in

EUR 36.64

1

Marca

Colore

Commerciante

Prezzo (EURO)