24 resultater (0,16782 sekunder)

Vis alle filtre

Merke

Farge

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

Elma Instruments Magnet stick ex - atex magnetic field indicator - Instrumenter

Elma Instruments Magnet stick ex - atex magnetic field indicator - Instrumenter

The EEx approved Magnet Stick is an instrument for testing for the presence of magneticfields. By simply holding the tip of the instrument near the test area, it indicates a magneticfield by glowing. The test lamp responds to all kinds of magnetic fields, from alternating currentto direct current and permanent magnets. (Sensitivity 300 gauss 0,3 mT). The ATEXand IECEx approvals are confirmed by NEMKO. (II 2G EEx ib IIC T4).APPLICATIONS:- Testing operating solenoid valves in pneumatic and hydraulic control equipment- Testing relays with coils and electrically-controlled solenoid valves in all types of vehiclesand machines- Testing solenoid valves when servicing oil burners

NOK 783.00
1

Elma Instruments Mi 3155 eurotest xde - Instrumenter

Elma Instruments Mi 3155 eurotest xde - Instrumenter

MI 3155 Eurotest XDe is the newest flagship of Metrel’s most advanced line of multi-functional measuring instruments and is designed specifically for testing in industry. What differentiates this instrument from the rest is its ergonomic design and an intuitive user interface, encompassing a memory organizer and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display. It is fully compliant with functionality standards (e.g. IEC/EN 61557) and other reference standards for testing (e.g. IEC/EN/HD 60364-4-41,...) as is required for any instrument that performs TRMS current measurements, RCD tests, line and loop impedance tests with 3 (and 4) wires and earth resistance measurements. Besides those, the instrument supports a wide range of tests and measuring functions, including on-line voltage monitoring, phase sequence testing, varistor testing, PI/DAR calculation, luminance measurement, discharge time testing, ISFL measurements, IMD tests as well as functional and visual inspections.

NOK 27882.00
1

Elma Instruments Elma 30 - magnetic field tester - Instrumenter

Elma Instruments Elma 30 - magnetic field tester - Instrumenter

Elma 30 is a small smart Pen-tool for test of magnetism without metallic contact. Elma 30 is held against the test point and will light with clearly strong red light, if there is a magnetic field. Indispensable for testing: - Pneumatics and hydraulics - Oil and gas burners - White goods and machinery Elma 30 provides easy and safe testing, without coming into contact with live wires. Supplied incl. batteries and test magnet. Technical data: Tests: Permanent magnets and coils AC / DC Batteries: 2x1, 5V LR03 (included) Dimensions: 20x140mm Weight: 45 grams

NOK 446.00
1

Elma Instruments Metrel mi3152 eurotest xc - Instrumenter

Elma Instruments Metrel mi3152 eurotest xc - Instrumenter

Eurotest XC "AUTO-TEST" multi installations tester is testing the mandatory tests much faster than any other tester on the marked. It has never been easier to test, measure and do documentation - just by pushing one button. FUNCTIONS: Voltage- and frequency // short curcuit current, loop impedance, phase-zero, phase-earth and phase-phase // Is testing all kinds of RCD`s , type AC, A, B, B+ & F, and tripout time and tripout current with a smart test current function // Low (resistance) ohm 7 and 200mA test on equipotential bondings // Insulations test from 50 to 1000V test voltage // 2-and 3-pole earth resistance to earth // specific earth resistance with ro adapter (extra accessory) // earth resistance measurement with 2 clamps (extra accessory) // Phase rotation detector // TRMS leakage- and current measurement (extra accessory) // First Fault leakage current measurement and indicative resistance measurement (IT-system) // memory with unique possibility for building up memory struct

NOK 26456.00
1

Elma Instruments Elma gold-plus battery tester - Instrumenter

Elma Instruments Elma gold-plus battery tester - Instrumenter

Elma ACT612 is a new smart battery tester for easy and fasty test of the capacity in 6 & 12V closed lead acid batteries, GEL batteries and car batteries. The instrument makes a 20 hour capacity test in 20 seconds, with display of the battery voltage and the battery capacity directly in Ah. The instrument is able to perform test continuesly without any rest periods to cool down. The instrument is usefull for e.g. cars, motor bikes, alarm systems, UPS systems, telephone communication equipment, tools and more. It is recommended that you normally recharges or change the battery when the capacity is below 65 %. a volt meter is only able to measure the voltage, not the capacity in the battery. This new battery tester is solving this problem by testing both the voltage and the capacity in few seconds. The resultats is displayed on the build-in LCD display. The tester is warning if the poles are not correct mounted on the test leads. Elma ACT612 gets power from the battery and is automatically testing on 6 & 12 V maintenance free/closed lead batteries, GEL batteries and car batteries from 1,2Ah to 100Ah. Is delivered incl. a bag and manual.

NOK 6124.00
1

Elma Instruments Elma dt-125 moisture meter - Instrumenter

Elma Instruments Elma dt-125 moisture meter - Instrumenter

Elma DT-125 er et nytt smart instrument for fuktighetsmåling i byggematerialer som tre, stein, betong, lettbetong, gips osv. I henhold til oppgaven er det mulig å skaffe ulike sonder både for destruktiv testing med hull i materialet og ikke-destruktiv overflatemåling. Instrumentet er uunnværlig for byggeren, fuktteknikeren, ingeniøren og andre som jobber med renovering og vannskadekontroll. Elma DT-125 måler også luftfuktighet og temperatur og har en stor opplyst kombidisplay. Du kan sette våt/tørr grenseverdi, materialevalg, automatisk kalibrering,min/maks-og auto av-funksjonen.Instrumentet leveres med innebygde nålelektroder inkludert batterier og bruksanvisning.Tilbehør som følger med: komplett koffert inkludert ekstra lange nålesonder , hammer elektrode , dybdesonde , overflateprobe og håndtakforlengelser.

NOK 1716.00
1

Elma Instruments Elma 45 - lan cable tester - Instrumenter

Elma Instruments Elma 45 - lan cable tester - Instrumenter

Instrumentet er designet for enkel og rask testing av LAN-kabelinstallasjoner. Instrumentet kan teste for kortslutninger, avbrudd, kryssede par, reverserte par og splittede par. Instrumentet er lett og hendig. Testresultat vises ved hjelp av en 14-segments LED-skjerm og 8 LED-er. Kabeltester er utstyrt med en beskyttelseskrets som hindrer skade på instrumentet hvis du ved et uhell velger telefonen i stedet for datakontakten. Elma 45 LAN-kabeltester leveres komplett i pose inkludert batteri, adapterkabel, manual og terminator #1 Tekniske data: Testkabellengde: 1,2-150 m Kretsbryterbeskyttelse: Tåler ringspenning og sløyfespenning Kontakt: RJ-45-, BNC-kabler Typer: UTP-, COAX-batterier Batteri: 9 volt 6F22 (inkludert) Dimensjoner: 170 x 52 x38 mm Vekt :180 g

NOK 2390.00
1

Elma Instruments Metrel mi2093 line tracer - Instrumenter

Elma Instruments Metrel mi2093 line tracer - Instrumenter

Metrel MI2093 Line Tracer is a complete cable tracer kit, for tracing on hidden cables and wires. The kit consists of a transmitter unit, which can be used on installations with and without present voltage, and a receiver with adjustable sensivity. The transmitter is forced by batteries and can be used to trace/follow cables both with and without voltage. Line Tracer will easily find a disconnected wire, plugs, sockets and more. If you connected to a cable with present voltage is it possible to follow/identify the cable throughout the net supply. The tracer will indikate if it is working on an installation with or without voltage, and if the battery voltage is to low. The receiver indicates how strong a signal it will catch reflected by diods og by sound signals. On the receiver is it possible to choose between three levels of sensivity, this will secure a more accurate tracing. With the special designed selective/high sensitive probe, you are able to identify fuses in boards

NOK 8593.00
1

Elma Instruments Easytest protect ke401 trace probe set - Instrumenter

Elma Instruments Easytest protect ke401 trace probe set - Instrumenter

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest Protect test kit is a further development of the known Easytest Classic Kit (desciption above). The instrumentet is having a lot of new functions eg. is it possible to see if data ports is connected. With the trace probe is it possible to detect ISDN/ADSL lines. Easytest Protect emits a sine signal with can cause in reduced "Crosstalk", and it is therefor possible to trace on live telephone cables. Easytest Protect can be connected through the integrated RJ 11, RJ 45 or ther included crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery probe: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight probe: 220 x 40 x 25 mm / 80 g

NOK 4093.00
1

Elma Instruments Elma combitest 425 - multifunction installation tester - Instrumenter

Elma Instruments Elma combitest 425 - multifunction installation tester - Instrumenter

Elma Combitest 425 is an innovative multifunction installation tester capable of carrying out safety tests on civil and industrial electric systems in compliance with IEC/EN61557-1. Furthermore the instrument is a 1 phase energy analyze and is capable of saving results of environmental parameters (illuminance, temperature), leakage current, active power, harmonics, power factor measurements on single phase systems. The resistive TFT color touch-screen display, the icon menues, the on screen help and the userfriendly development make the instrument extremely intuitive even for unskilled users. Its numberless features grant the user a wide range of applications in the world of measurements. The multifunction installation tester Elma Combitest 425 allows saving all measures into an internal memory so transferring the saved data to a PC by means of USB (optional) or built in WiFi interface with an iOS or Android smartphones or tablet . The software supplied among standard accessories allows printing the testing reports. The instrument also drives optional short circuit adapter to carry out high resolution (0.1mOhm) loop/line impedance measurements with prospective short-circuit current calculation. This allows accurate measurements even close to power stations enabling the user to correctly size the protection devices in any system. Further possible tests consist in checking breakdown current, tripping current, I2t relative to breakers (MCB) with curves B, C, D, K and fuses type gG as well as aM and the percentage voltage drop on the main power lines. The test on earth leakage relay tester RCDs up to 10A (with optional accessory) is also possible with the instrument. Through optional clamp it is possible to measure the leakage current.

NOK 19349.00
1

Elma Instruments Easytest classic ke301 - Instrumenter

Elma Instruments Easytest classic ke301 - Instrumenter

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

NOK 3529.00
1

Elma Instruments Metrel mi3125 eurotest combo - Instrumenter

Elma Instruments Metrel mi3125 eurotest combo - Instrumenter

Metrel MI3125 Eurotest COMBO is the perfectee instrument if you need a simple solution without memory and PC-communication Metrel MI3125 Eurotest COMBO has build-in fuse table, which automatically compares the short circuit measurement with the selected fuses test time curve, and now either pass or fail the measurement. With its compact size and big display Metrel MI3125 Eurotest COMBO is easy to use. On the big backlighted display the instrument show all the measurements, and it will clearly be indicated if the measurement has passed complied to the choosen limits - even with a colour indication (red or green), but also graphical in the display. MI3125 Eurotest COMBO gives a lot of exiting possibilities, ie. a very uderfriendly help menu with smart connection diagrams directly on the display. Short circuit current/loop impedance, phase/neutral, phase/earth and phase/phase. Tests RCD s type AC and A (with vibrant DC). The smart test ramp function indicates test current- and time. Low ohm - 200mA test on earth connections. Insulation tester with 50, 100, 250, 500 and 1000V test voltage. 2-and 3-pole earth loop resistance (Earth spike kit for 3-pole measurement. Has to be ordered separately) Phase sequence and voltage measurements up to 550V Build-in help function - Very effectively tool for great help to technicians. Metrel MI3125 Eurotest COMBO complies with IEC 61010-1 CAT III 600V and CAT IV 300V. Is delivered in a bag incl. rechargeable batteries, charger, test leadsand manual. Technical data: Earth resistance - 2/3-polet: Measuring range: 0-20-200-10000, Resolution: 0,01-0,1-1 Short circuit current/Loop Impedance Resistance: 0-10-100-1000-10000 Resolution: 0,01-0,1-1-10 Test current: 6,5A Short circuit current: 0-20kA Insulation measurement: Measuring range: 0-20-200-1000M Resolution/testcurrent: 0,01-0,1-1M Test voltage: 100-250-500-1000V Low measurement: Range: 0-20-200-2000 Res

NOK 13862.00
1