ProfitSpring | B2B PPC Agency

M.Line LENS FOR ST-13136

Klosz kierunkowskazu M.LINE Honda 600 CB Produkt Renomowanej Marki M.LINE Opis: Producent: M.LINE to marka od prawie 10 lat istniejąca na rynku polskim. Jej dystrybutor dba o najwyższą jakość oferowanych produktów, jak również zapewnia optymalną cenę w porównaniu do dostawców z grupy PREMIUM. układu elektrycznego, linki, łożyska, lusterka, łańcuchy, oświetlenie, odzież, el. silnika, zębatki, akumulatory. Zastosowania: Honda 600 CB 600 (Hornet) numer_kat: LENS FOR ST-13136

PLN 16.62

1

USZCZELKA KOLEKTORA SSĄC. AUDI AUDI A3 1.6 BAG,BLP

USZCZELKA KOLEKTORA SSĄCEGO AUDI A1 A3 SEAT ALHAMBRA ALTEA ALTEA XL Uszczelka kolektora ssącego pasuje do: AUDI A1, A3: SEAT ALHAMBRA, ALTEA, ALTEA XL, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, TOLEDO III, TOLEDO IV: SKODA FABIA II, OCTAVIA II 1.4-1.6 02.03- VICTOR REINZ Ilość: 1 Oryginalnynbsp;produkt wysokiej jakości znanego producenta:nbsp;Victor Reinz Lista kompatybilnych pojazdów wraz z dodatkowymi informacjami o zastosowaniu danej części znajduje się w zakładce PASUJE DO POJAZDÓW pod parametrami. DANE TECHNICZNE PRODUKTU Ilość: 1 Producent:nbsp;Victor Reinz Numer katalogowy oryginału:nbsp;AUDI 03C 129 717 A SPRAWDŹ CZY OFEROWANA CZĘŚĆ PASUJE DO TWOJEGO POJAZDU? Lista samochodów do których pasuje część: Audi A1 (8X1, 8XK) 1.4 TFSI (CAVG CTHG) 1390ccm 185KM/136kW 2011/01-2015/04, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVG, CTHG, Separacja bloków Audi A1 (8X1, 8XK) 1.4 TFSI (CAXA CNVA) 1390ccm 122KM/90kW 2010/05-2015/04, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXA, CNVA, Separacja bloków Audi A1 Sportback (8XA, 8XF) 1.4 TFSI (CAVG CTHG) 1390ccm 185KM/136kW 2011/11-2015/04, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVG, CTHG, Separacja bloków Audi A1 Sportback (8XA, 8XF) 1.4 TFSI (CAXA CNVA) 1390ccm 122KM/90kW 2011/11-2015/04, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXA, CNVA, Separacja bloków Audi A3 (8P1) 1.4 TFSI (CAXC CMSA) 1390ccm 125KM/92kW 2007/09-2012/08, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXC, CMSA, Separacja bloków Audi A3 (8P1) 1.6 FSI (BAG BLF BLP) 1598ccm 115KM/85kW 2003/08-2007/09, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: BAG, BLF, BLP, Separacja bloków Audi A3 kabriolet (8P7) 1.4 TFSI (CAXC) 1390ccm 125KM/92kW 2011/02-2013/05, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXC Audi A3 Sportback (8PA) 1.4 TFSI (CAXC CMSA) 1390ccm 125KM/92kW 2007/09-2013/03, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXC, CMSA, Separacja bloków Audi A3 Sportback (8PA) 1.6 FSI (BLF BLP) 1598ccm 115KM/85kW 2004/09-2007/09, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: BLF, BLP, Separacja bloków Seat ALHAMBRA (710, 711) 1.4 TSI (CAVA CNWB CTHA) 1390ccm 150KM/110kW 2010/06-, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVA, CNWB, CTHA, Separacja bloków Seat ALTEA (5P1) 1.4 TSI (CAXC) 1390ccm 125KM/92kW 2007/11-, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXC Seat ALTEA XL (5P5, 5P8) 1.4 TSI (CAXC) 1390ccm 125KM/92kW 2007/11-, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXC Seat IBIZA IV (6J5, 6P1) 1.4 TSI (CAVF CNUB CTHF CTJB) 1390ccm 150KM/110kW 2009/06-2015/05, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVF, CNUB, CTHF, CTJB, Separacja bloków Seat IBIZA IV SC (6J1, 6P5) 1.4 TSI (CAVF CNUB CTHF CTJB) 1390ccm 150KM/110kW 2009/01-2015/05, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVF, CNUB, CTHF, CTJB, Separacja bloków Seat IBIZA IV SC (6J1, 6P5) 1.4 TSI Cupra (CAVE CTHE CTJC) 1390ccm 180KM/132kW 2009/06-2015/05, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVE, CTHE, CTJC, Separacja bloków Seat IBIZA IV ST (6J8, 6P8) 1.4 TSI (CAVF CNUB CTHF CTJB) 1390ccm 150KM/110kW 2012/02-2015/05, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVF, CNUB, CTHF, CTJB, Separacja bloków Seat LEON (1P1) 1.4 TSI (CAXC) 1390ccm 125KM/92kW 2007/11-2012/12, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXC Seat TOLEDO III (5P2) 1.4 TSI (CAXC) 1390ccm 125KM/92kW 2007/11-2009/05, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXC Seat TOLEDO IV (KG3) 1.4 TSI (CAXA) 1390ccm 122KM/90kW 2012/07-2015/06, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXA Skoda FABIA II (542) 1.4 TSI RS (CAVE CTHE) 1390ccm 180KM/132kW 2010/05-2014/12, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVE, CTHE, Separacja bloków Skoda FABIA II Combi (545) 1.4 TSI RS (CAVE CTHE) 1390ccm 180KM/132kW 2010/05-2014/12, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAVE, CTHE, Separacja bloków Skoda OCTAVIA II (1Z3) 1.4 TSI (CAXA) 1390ccm 122KM/90kW 2008/11-2013/06, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: CAXA Skoda OCTAVIA II (1Z3) 1.6 FSI (BLF) 1598ccm 115KM/85kW 2004/02-2008/10, szczegóły zastosowania: Wymagana ilość: 4, Kod silnika: BLF Skoda OCTAVIA II Combi (1Z5) 1.4 TSI (CAXA) 1390ccm 122KM/90kW 2008/11-2013/06, szczegóły

PLN 15.13

1

Żarówka, lampa kierunkowskazu Hella 556 751 PY21W 21 W 2 szt.

Hella 8GA 006 841-133 Żarówka, lampa kierunkowskazu Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Hella 8GA 006 841-133 Żarówka, lampa kierunkowskazu : There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 16.59

1

ZAROWKA RURKOWA 12V 10W /28MM/HART/10SZT

Żarówka 12V 10W /28MM/10SZT Hart 521 664 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka 12V 10W /28MM/10SZT Hart 521 664: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light

PLN 12.46

1

Żarówki Hella R5W 5 W 10 szt.

Żarówka R5W 12V 5W Hella 8GA 002 071-121 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka R5W 12V 5W Hella 8GA 002 071-121: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light

PLN 9.91

1

Żarówki Hart 520 494 R5W 5 W 10 szt.

Żarówka POMOCN.24V R5W RURK. /10SZT Hart 520 494 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka POMOCN.24V R5W RURK. /10SZT Hart 520 494: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 8.67

1

Żarówka Hella 513 003 H4 1 szt.

Żarówka halogenowa H4 12V 100/55W Hella 8GJ 002 525-101 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka halogenowa H4 12V 100/55W Hella 8GJ 002 525-101: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 13.95

1

Żarówki Hella R10W 10 W 10 szt.

Żarówka R10W 12V 10W Hella 8GA 002 071-131 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka R10W 12V 10W Hella 8GA 002 071-131: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light because

PLN 14.56

1

Uszczelka kolektora ssącego ELRING 151.140

Uszczelka kolektora dolotowego ELRING 151.140 USZCZELKA KOLEKTORA SSĄC.AUDI Audi A3 1.6 BAG,BLP 08/03-,VW Lupo 1,4 ARR #9654;️ Marka: ELRING #9654;️ Numer katalogowy: 151.140 #9654;️ Oferowana ilość: szt. nbsp; #9888;️ W jednym modelu pojazdu ta część może występować w kilku wersjach / wariantach. #9888;️ Porównaj część wizualnie oraz sprawdz dopasowanie w katalogu po VIN. #9888;️ Jeśli nie podano inaczej, informacje w ofercie dotyczą części do pojazdów których pierwotny rynek przeznaczenia to Polska. #9888;️ Twoje auto jest sprowadzane np. z USA? Do doboru części należy używać katalogów przeznaczonych na rynek USA. Numery porównawcze: AJUSA: 13186600 AUDI: 03C129717C BGA: MG8567 CORTECO: 450092P CUPRA: 03C129717C ELWISROYAL: 0256014 FA1: 511-040 FEBI: 39735 GLASER: X87493-01 GOETM: 31-030229-00 PAYEN: JD5809 REINZ: 71-36116-00 SEAT: 03C129717C SKODA: 03C129717C SWAG: 30939735 TOPRAN: 111913 VW: 03C129717C

PLN 19.03

1

Zestaw naprawczy, rozrusznik Magneti Marelli 940113190011

Zestaw naprawczy rozrusznika MAGNETI 940113190011 SET OF CARBON BRUSHES FOR STAR MOT; Starter motor no: ZU BSX 137/143 JF / OE Number - W jednym modelu auta mogą występować różne warianty części. W przypadku niepewności o właściwy dobór części, zalecana jest weryfikacja wg numeru VIN. Marka: MAGNETI MARELLI Producent części: MAGNETI MARELLI Producent: MAGNETI MARELLI Nazwa producenta: MAGNETI MARELLI Numer katalogowy części: 940113190011 Kod części: 940113190011 Kod producenta: 940113190011 Numer katalogowy producenta: 940113190011 Stan: Nowy Waga kg: 0,056 Wysokość cm: 2,5 Szerokość cm: 5 Długość cm: 7,5

PLN 12.44

1

Sprzedawca

Cena (EUR)