21 wyniki (0,22530 sekundy)

Pokaż wszystkie filtry

Sprzedawca

Cena (EUR)

Resetuj filtr

Produkty
Z
Sklepy

Żarówki Hella R10W 10 W 10 szt.

Żarówki Hella R10W 10 W 10 szt.

Żarówka R10W 12V 10W Hella 8GA 002 071-131 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka R10W 12V 10W Hella 8GA 002 071-131: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light because

PLN 1.00
2

Żarówki Hella R5W 5 W 10 szt.

Żarówki Hella R5W 5 W 10 szt.

Żarówka R5W 12V 5W Hella 8GA 002 071-121 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka R5W 12V 5W Hella 8GA 002 071-121: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light

PLN 2.95
2

Żarówka Hella 513 003 H4 1 szt.

Żarówka Hella 513 003 H4 1 szt.

Żarówka halogenowa H4 12V 100/55W Hella 8GJ 002 525-101 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka halogenowa H4 12V 100/55W Hella 8GJ 002 525-101: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 12.81
2

Żarówki Hart 520 494 R5W 5 W 10 szt.

Żarówki Hart 520 494 R5W 5 W 10 szt.

Żarówka POMOCN.24V R5W RURK. /10SZT Hart 520 494 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka POMOCN.24V R5W RURK. /10SZT Hart 520 494: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 8.67
2

Żarówka, lampa kierunkowskazu Hella 556 751 PY21W 21 W 2 szt.

Żarówka, lampa kierunkowskazu Hella 556 751 PY21W 21 W 2 szt.

Hella 8GA 006 841-133 Żarówka, lampa kierunkowskazu Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Hella 8GA 006 841-133 Żarówka, lampa kierunkowskazu : There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 16.59
2

Żarówki Hart W5W 5 W 10 szt.

Żarówki Hart W5W 5 W 10 szt.

Żarówka CALOSZKL.24V W5W /10SZT Hart 521 689 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka CALOSZKL.24V W5W /10SZT Hart 521 689: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish

PLN 4.75
1

Magneti Marelli W5W 5 W 003921100000

Magneti Marelli W5W 5 W 003921100000

Żarówka W5W 12V 5W Magneti marelli 003921100000 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka W5W 12V 5W Magneti marelli 003921100000: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light

PLN 8.00
1

ZAROWKA RURKOWA 12V 10W /28MM/HART/10SZT

ZAROWKA RURKOWA 12V 10W /28MM/HART/10SZT

Żarówka 12V 10W /28MM/10SZT Hart 521 664 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka 12V 10W /28MM/10SZT Hart 521 664: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light

PLN 12.46
2

Żarówka Hella H9 65 W 1 szt.

Żarówka Hella H9 65 W 1 szt.

Żarówka halogenowa H9 12V 65W Hella 8GH 008 357-001 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka halogenowa H9 12V 65W Hella 8GH 008 357-001: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 19.00
1

Reperaturka zacisku AUTOFREN D42499LK

Reperaturka zacisku AUTOFREN D42499LK

Zestaw naprawczy, zacisk hamulca AUTOFREN SEINSA D Kod towaru: D42499LK AUT Ciągły rozwój przedsiębiorstwa AUTOFREN, rosnąca jakość i poszerzany asortyment wyrobów zapewnił firmie miejsce wśród czołowych producentów części zamiennych do układów napędowych i hamulcowych. O jakości firmy może świadczyć fakt, że jej produkty trafiają także do pierwszego montażu w samochodach marki Mercedes-Benz. W gamie produktów marki znajduje się szeroki zakres zestawów naprawczych do układu hamulcowego, dedykowanych wielu modelom samochodów europejskich, amerykańskich i azjatyckich marek. Specyfikacja techniczna: Rodzaj gwintu: z bieżnikiem lewostronnym Specyfikacja: WITH MECHANISM System hamulcowy: BOSCH Średnica [mm]: 48 Strona zabudowy: Oś tylna Pamiętaj, że producent pojazdu mógł zastosować kilka rodzajów części w jednym roczniku. Weryfikuj po dopasowaniu, numerach części oryginalnej, parametrach części oraz numerze VIN!

PLN 0.00
1

Autofren D41588K Zestaw naprawczy, zacisk hamulca

Autofren D41588K Zestaw naprawczy, zacisk hamulca

Zestaw naprawczy, zacisk hamulca AUTOFREN SEINSA D Kod towaru: D41588K AUT Ciągły rozwój przedsiębiorstwa AUTOFREN, rosnąca jakość i poszerzany asortyment wyrobów zapewnił firmie miejsce wśród czołowych producentów części zamiennych do układów napędowych i hamulcowych. O jakości firmy może świadczyć fakt, że jej produkty trafiają także do pierwszego montażu w samochodach marki Mercedes-Benz. W gamie produktów marki znajduje się szeroki zakres zestawów naprawczych do układu hamulcowego, dedykowanych wielu modelom samochodów europejskich, amerykańskich i azjatyckich marek. Specyfikacja techniczna: Specyfikacja: WITH MECHANISM Strona zabudowy: Oś tylna System hamulcowy: LUCAS/NISSIN Średnica [mm]: 34 Pamiętaj, że producent pojazdu mógł zastosować kilka rodzajów części w jednym roczniku. Weryfikuj po dopasowaniu, numerach części oryginalnej, parametrach części oraz numerze VIN!

PLN 0.00
1

ERT 410093 Zestaw tulei prowadzących, zacisk hamulca

ERT 410093 Zestaw tulei prowadzących, zacisk hamulca

Zestaw tulei zacisku ERT 410093 Specyfikacja techniczna: zestaw pełny: system hamulcowy: AKEBONO średnica 1 / średnica 2 [mm]: 10/10 specyfikacja: WITH GUIDE PINS ERT został utworzony w Eugi, jako producent technicznych gumowych części do automatycznych części hamulcowych. Teraz, po prawie pięćdziesięciu latach, można powiedzieć, że są specjalistami w produkcji części samochodowych. Od momentu pojawienia się firmy ich głównym celem było osiągnięcie doskonałości. Rozwijają i wytwarzają swoje produkty, gwarantując ich wysoką jakość. Zadaniem ERTnbsp;jest spełnianie surowych wymagań i pomaganie klientom w osiąganiu coraz lepszych wyników. Dokonują tego dzięki swojej solidnej wiedzy w tym zakresie. Technologie ERT służą klientom i kierowcom W związku z tym, że w zakresie motoryzacji nie ma miejsca na kompromisy, zestawy tulei prowadzących do zacisków hamulca firmy ERT są starannie opracowywane i skrupulatnie testowane. Zapewniają najwyższą skuteczność. Ponadto są wytwarzane z wykorzystaniem zaawansowanej konstrukcji i ogromnej staranności, dzięki czemu zapewniają większą trwałość.nbsp; Uwaga! W sporadycznych przypadkach zdarza się, iż w tych samych modelach oraz rocznikach samochodów stosowane były części o różnych parametrach. Upewnij się, że dobrałeś właściwą część porównując ją ze specyfikacją techniczną, numerami OE oraz listą pasujacych pojazdów.

PLN 21.56
1

Olej silnikowy Orlen Oil Mixol S 1 L

Olej silnikowy Orlen Oil Mixol S 1 L

Olej silnikowy Orlen Oil Mixol S 1 L Orlen Opis szczegółowy Zastosowanie ORLEN OIL Miksol S przeznaczony jest do dwusuwowych silników z zapłonem iskrowym smarowanych systemem mieszankowym. Zawiera rozpuszczalnik zapewniający łatwe mieszanie z paliwem. Może być wlewany bezpośrednio do zbiornika z paliwem. Dozowanie: 2% w stosunku do paliw /1:50/, jeżeli producent silnika nie zaleci inaczej. Normy, aprobaty, specyfikacje Spełnia wymagania: PN-70/C-96092 Parametry produktuRodzaj silnika: Benzynowy Rodzaj oleju: Mineralny Klasa letnia lepkości: 20 Dla motocykli: Tak Pojemność: 1 l (dm³) Liczba opakowań pierwszego rzędu na palecie: 50 op. zb. (DU) Piktogramy GHS: Toksyczność ostra (droga pokarmowa, po naniesieniu na skórę, po narażeniu inhalacyjnym), Działanie drażniące na skórę, Działanie drażniące na oczy, Działanie uczulające na skórę, Działanie toksyczne na narządy docelowe – jednorazowe narażenie, Działanie drażniące na drogi oddechowe, Skutek narkotyczny, Stwarzające zagrożenie dla warstwy ozonowej Waga brutto: 1 kg Hasła ostrzegawcze: niebezpieczeństwo Specyfikacje: Api : tb/ta Waga jednostkowa brutto: 1 kg Numer GTU: GTU_03 - Oleje i smary Spełnia normy producentów: Pn-70/c-96092 , api : tb/ta Krótki opis marketingowy: Orlen oil miksol s przeznaczony jest do dwusuwowych silników z zapłonem iskrowym smarowanych systemem mieszankowym. Zagrożenie: Tak Wymiar opakowania (SxWxG): 13 x 22 x 5,5 cm Liczba opakowań konsumenckich: 12 szt. Liczba opakowań pierwszego rzędu na warstwie palety: 10 op. zb. (DU) Kod CN: 2710 19 81 Rodzaj zagrożenia: Toksyczność ostra (droga pokarmowa, po naniesieniu na skórę, po narażeniu inhalacyjnym), działanie drażniące na skórę, działanie drażniące na oczy, działanie uczulające na skórę, działanie toksyczne na narządy docelowe – jednorazowe narażenie, działanie drażniące na drogi oddechowe, skutek narkotyczny, stwarzające zagrożenie dla warstwy ozonowej Liczba warstw na palecie: 5 warstw (warstwa) Produkt medyczny / Produkt akcyzowy: Produkt akcyzowy Warning! Should the order you placednbsp;exceed 10 kg., you will be charged the difference for any extra shipping costs associated with your order.

PLN 19.34
1

FEBEST OSLONA PODPORY

FEBEST OSLONA PODPORY

Sworznie wahaczy Febest BMBJB-X5 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Wahacz, zawieszenie kola Sworznie wahaczy Febest BMBJB-X5: nbsp; nbsp;A ball bearing is a connecting part that allows the components attached to it to rotate in several planes. Usually one part is fixed rigidly, but the second part is fixed movably. There can be anywhere from 1 to 4 ball bearings. nbsp; nbsp;It's an integral part that does the hard work under high loads. Now ball bearings have stepped forward in their technology, so they can run for hundreds of thousands of kilometers without replacement. Ball bearing arrangement: nbsp; nbsp;A metal rod or "finger" with a ball tip on one side and a thread on the other. The dust cap is a rubber elastic element that makes the rod work hermetically. Metal cylindrical body - narrow hole on one side, wide hole on the other Polymeric liner - usually consisting of two parts: the bottom (cup) and the top (stop). Pressure washer - secures the polymer liner. The flattening of the pressure washer. It's essentially the bottom of the ball bearing. How it works: nbsp; nbsp;As you realized the closed "ball" can rotate in either direction, even if it spins. To the cylindrical body is attached a fixed mount, which is installed in the right elements of the suspension - this part is not movable. But the threaded top pin is attached to the moving parts, so they can rotate or turn at all. nbsp; nbsp;You turn the steering wheel, the effort goes through the steering rack to the knuckle, and you need the pivot joints to make it turn. This is exactly the job that the supports, steering knuckles and support bearings do. Failure and life: nbsp; nbsp;The life is directly dependent on the polymer liner inside, if it breaks, the metal pin starts to go and finish off the plastic. Knocks and clicks appear on bumps and turns. The main cause of ball bearing failure is a rupture of the dust cover. nbsp; nbsp;Thus, the polymer insert wears out, the "pin" starts to go up and down and in other directions, i.e. there is a backlash, which just "kills" the support from the inside. Just the knocks and squeaks characterize the wear of the inner polymer part. O producencie Febest: nbsp;nbsp;Firma Febest jest zarejestrowana w Niemczech i oferuje szeroką gamę produktów: wyroby gumowe, części podwozia, elementy układu hamulcowego, zestawy naprawcze, elementy złączne, ramy nośne i inne. Należy zauważyć, że produkty Febest są często wybierane przez właścicieli samochodów, którzy nie mogą znaleźć odpowiednich odpowiedników do naprawy. Obecnie większość zakładów produkcyjnych Febestu znajduje się w Chinach. nbsp;nbsp;Jakość produktów Febest można określić jako średnią. Rekompensuje to niska cena - analogi Febest są wielokrotnie tańsze od części oryginalnych. Ogólnie rzecz biorąc, prawie wszystkie produkty gumowe, przeguby homokinetyczne i przeguby kulowe mają średnią jakość. Stabilizatory, mocowania silnika, poprzeczki, śruby, drążki kierownicze, haki są lepszej jakości. Należy jednak pamiętać, że ze względu na stosunek ceny do jakości produkty te mogą być akceptowalnym (a często jedynym) rozwiązaniem w przypadku napraw samochodów europejskich, amerykańskich i azjatyckich. Należy pamiętać, że produkty te są idealne dla osób o ograniczonym budżecie. Oszczędności najlepiej odczują właściciele samochodów, którzy sami serwisują swoje pojazdy i nie są przyzwyczajeni do wydawania znacznych sum pieniędzy na przeglądy w warsztatach samochodowych. nbsp; nbsp;W jednym modelu auta, mogą występować różne warianty części. W przypadku niepewności o właściwy dobór części, zalecana jest weryfikacja wg numeru VIN.

PLN 9.29
1

AUTOFREN ZESTAW NAPRAWCZY ZACISKU AUDI 100 A1 A3 8L 8P 8V

AUTOFREN ZESTAW NAPRAWCZY ZACISKU AUDI 100 A1 A3 8L 8P 8V

AUTOFREN SEINSA - hiszpański producent części samochodowych. AUTOFREN oferuje wysokiej klasy części zamienne oraz stosowane podczas pierwszego montażu części oryginalne. W ofercie firmy znajduje się obecnie ponad 12000 produktów, w tym przede wszystkim elementy gumowe, z którymi firma jest nieodłącznie kojarzona, ale także elementy układu hamulcowego oraz sterowania sprzęgłem. Wszystkie części zanim trafią na rynek poddawane są szczegółowej kontroli i precyzyjnym testom. ZESTAW NAPRAWCZY ZACISKU HAMULCOWEGO AUDI A5 A6 A8 Allroad Q2 Q3 Q5 TT BMWNumer katalogowy części: D7003C AUTOFRENNajważniejsze informacje:- Zestaw pełnySystem hamulcowy: ATESpecyfikacja: WITH GUIDE PINSŚrednica [mm]: 12 Jak upewnić się, czy ta część pasuje?Najpewniejszym sposobem na prawidłowy dobór części jest sprawdzenie numeru części aktualnie zamontowanej w samochodzie.Numery zamienników:A.B.S. 43019, ATE 11.0230-0162.2, ATE 11.0230-0840.1, ATE 11.0230-0934.1, ATE 11.0230-0984.1, ATE 11.8170-0306.1, ATE 11.8170-0401.1, ATE 11.8170-0407.1, ATE 11.8170-0530.1, ATE 11.8170-0584.1, ATE 11.8170-0675.1, ATE 11.8170-0758.1, ATE 11.8171-0008.1, ATE 11.9387-7090.2, ATE 990049, AUDI 4D0 698 647, BMW 34111153200, BMW 34111157041, BMW 34111158200, BMW 34111166233, BMW 34116768437, BMW 34116850971, BMW 34116850972, BMW 34216850860, BMW 34412354195, BOSCH 1987470506, BUDWEG CALIPER 169200, CHEVROLET 15254670, DAEWOO 11817100081, ERT 410031, FORD 1384687, FORD 1432360, FORD 1682877, FORD 1947983, FORD 2L527, FORD 5181351, FORD 5181355, FORD 5303800, FORD 5303801, FORD 6087586, FORD 6G91-2B135-AB, FORD 6G91-2B135-AC, FORD 7201660, FORD 81AB-2L527-AA, FORD DG9C2B294BA, FORD DG9C2B302BA, FRENKIT 812001, JAGUAR C2C27289, JAGUAR C2C27297, JAGUAR JLM2213, JAGUAR JLM2249, KIA 0K20A-33-694, LAND ROVER LR000567, LYNXauto BC-2089, MERCEDES-BENZ 000 420 20 15, MERCEDES-BENZ 000 421 15 06, MERCEDES-BENZ 0004210818, MERCEDES-BENZ 003 420 04 15, METZGER Z1306X, MINI 34110141349, NISSAN 41139-9F500, NK 8999021, OJD (QUICK BRAKE) 113-1306X, OJD (QUICK BRAKE) 1306X, OPEL 542880, OPEL 542881, OPEL 546310, OPEL 546528, OPEL 90009164, OPEL 9195063, OPEL 93179706, PEUGEOT 1610762580, PEUGEOT 4401R9, PEUGEOT 4404G1, PEUGEOT 4404G2, PEUGEOT 4404J6, PEUGEOT 4404K8, PEUGEOT 443933, PORSCHE 928 351 947 00, RENAULT 440016332R, RENAULT 7701049101, ROVER SYH000090, SAAB 8955486, SAAB 8969651, SAAB 90297771, sbs 8999002, SKODA 3A0 615 125, SKODA 3A0 615 125 A, SKODA 3B0 615 125, SKODA 4A0 615 125 A, SKODA 4B0 615 125, TALBOT 17679800, TOYOTA 04951-05010, TRW BHS1293E, TRW BHS1294E, TRW ST1657, VAG 251615219, VOLVO 30665017, VOLVO 30666829, VOLVO 3342541, VOLVO 8602902, VOLVO 8603757 Zastosowanie w pojazdach: ALFA ROMEO 145 ALFA ROMEO 145 (930_) 1.4 i.e. (930.A3) - od 1994.07 do 1996.12 - 66 kW - 90 KM - 1351 ccm ALFA ROMEO 145 (930_) 1.4 i.e. 16V T.S. (930.A3A) - od 1996.12 do 2001.01 - 76 kW - 103 KM - 1370 ccm ALFA ROMEO 145 (930_) 1.6 16V T.S. (930.A2C) - od 1997.09 do 2000.12 - 82 kW - 112 KM - 1598 ccm ALFA ROMEO 145 (930_) 1.6 i.e. (930.A2) - od 1994.10 do 1996.12 - 76 kW - 103 KM - 1596 ccm ALFA ROMEO 145 (930_) 1.6 i.e. 16V T.S. (930.A2) - od 1996.12 do 2001.01 - 88 kW - 120 KM - 1598 ccm ALFA ROMEO 145 (930_) 1.7 i.e. 16V (930.A1) - od 1994.10 do 1996.12 - 95 kW - 129 KM - 1712 ccm ALFA ROMEO 145 (930_) 1.8 i.e. 16V (930.A1A) - od 1998.03 do 2001.01 - 106 kW - 144 KM - 1747 ccm ALFA ROMEO 145 (930_) 1.8 i.e. 16V T.S. (930.A1A) - od 1996.12 do 1998.12 - 103 kW - 140 KM - 1747 ccm ALFA ROMEO 145 (930_) 1.9 JTD (930.A4B) - od 1999.02 do 2001.01 - 77 kW - 105 KM - 1910 ccm ALFA ROMEO 145 (930_) 1.9 TD (930.A4) - od 1994.10 do 1999.02 - 66 kW - 90 KM - 1929 ccm ALFA ROMEO 145 (930_) 2.0 16V (930.A5) - od 1998.03 do 2001.01 - 114 kW - 155 KM - 1970 ccm ALFA ROMEO 145 (930_) 2.0 16V T.S. (930.A5) - od 1995.10 do 2001.01 - 110 kW - 150 KM - 1970 ccm ALFA ROMEO 146 ALFA ROMEO 146 (930_) 1.4 i.e. 16V T.S. (930.B3A) - od 1996.11 do 2001.01 - 76 kW - 103 KM - 1370 ccm ALFA ROMEO 146 (930_) 1.6 16V T.S. (930.B2C) - od 1997.09 do 2000.12 - 82 kW - 112 KM - 1598 ccm ALFA ROMEO 146 (930_) 1.6 i.e. 16V T.S. (930.B2B, 930.B2C) - od 1996.11 do 2001.10 - 88 kW - 120 KM - 1598 ccm ALFA ROMEO 146 (930_) 1.8 i.e. 16V T.S. (930.B1A) - od 1996.11 do 2001.01 - 103 kW - 140 KM - 1747 ccm ALFA ROMEO 146 (930_) 1.8 i.e. 16V T.S. (930.B1A) - od 1998.03 do 2001.01 - 106 kW - 144 KM - 1747 ccm ALFA ROMEO 146 (930_) 1.9 JTD (930.B4B) - od 1999.02 do 2001.01 - 77 kW - 105 KM - 1910 ccm ALFA ROMEO 146 (930_) 2.0 16V (930.B5) - od 1997.03 do 2001.10 - 114 kW - 155 KM - 1970 ccm ALFA ROMEO 146 (930_) 2.0 16V T.S. (930.B5) - od 1995.10 do 2001.01 - 110 kW - 150 KM - 1970 ccm

PLN 18.34
1