ProfitSpring | B2B PPC Agency

M.Line LENS FOR ST-13136

Klosz kierunkowskazu M.LINE Honda 600 CB Produkt Renomowanej Marki M.LINE Opis: Producent: M.LINE to marka od prawie 10 lat istniejąca na rynku polskim. Jej dystrybutor dba o najwyższą jakość oferowanych produktów, jak również zapewnia optymalną cenę w porównaniu do dostawców z grupy PREMIUM. układu elektrycznego, linki, łożyska, lusterka, łańcuchy, oświetlenie, odzież, el. silnika, zębatki, akumulatory. Zastosowania: Honda 600 CB 600 (Hornet) numer_kat: LENS FOR ST-13136

PLN 16.62

1

Febest ASSB-FOR Połączenie, wał wzdłużny

Przedmiot: Połączenie, wał wzdłużny Oferta dotyczy (ilość): 1 sztuki Numer katalogowy: FSTASSB-FOR Informacje techniczne dotyczące ASSB-FOR Ciężar [kg]: 0,234 Długość [mm]: 35 Długość opakowania [cm]: 6,0 Średnica [mm]: 22 Uwaga Data produkcji do: 199811 Data produkcji do: 200006 Data produkcji do: 200202 Data produkcji do: 200205 Data produkcji do: 200506 Data produkcji do: 200711 Data produkcji do: 200905 Data produkcji do: 201611 Data produkcji do: 201708 Data produkcji od: 199807 Kraj producenta pojazdu: Ameryka Północna Kraj producenta pojazdu: Chiny Pojazd z kierownicą po lewej /prawej stronie: dla pojazdu z kierownicą z lewej strony Rodzaj skrzyni biegów: Automatyczna skrzynia biegów Rodzaj skrzyni biegów: Skrzynia biegów manualna Rok prod. do: 201611 Rok prod. od: 200007 Rok prod. od: 200408 Rok prod. od: 200905 Rok prod. od: 201012 dla kodu modelu: T30 dla kodu modelu: Z50 dla kodu modelu: Z51R dla kodu modelu: Z51Z Kody OE / Numery porównawcze / Zamienniki FBS ASSB-FOR: , NISSAN: 37000-1AA0A, 37000-1AA1A, 37000-8H310, 37000-8H510, 37000-8H800, 37000-CB000, 37000-CB00A, SUBARU: 27031-AC151, 27031-AC161, 27031-AC191, 27031-AC201, 27031-FC001, 27031-FC011, 27031-FC020, 27031-FC030, 27031-FC041, 27111-AE070, 27111-AE071, 27111-AE080, 27111-AE081, 27111-AG000, 27111-AG010, 27111-AG020, 27111-AG040, 27111-AG050, 27111-AG060, 27111-AG070, 27111-AG100, 27111-AG110, 27111-AG120, 27111-AG140, 27111-AG150, 27111-AG160, 27111-AG210, 27111-AG220, 27111-FJ040, 27111-FJ050, 27111-FJ060, 27111-FJ070, 27111-FJ080, 27111-FJ090, 27111-SA000, 27111-SA001, 27111-SA011, 27111-SA020, 27111-SA030, 27111-SA040, 27111-SG000, 27111-SG001, 27111-SG010, 27111AG200, TOYOTA: 37100-44030, 37110-28440, 37230-49015, Dobieraj części po katalogu TecAlliance, katalogu ASO VIN W jednym modelu auta, mogą występować różne warianty danej części. W przypadku niepewności o właściwy dobór części, zalecana jest weryfikacja wg. numeru VIN

PLN 106.74

1

PIASTA Z LOZ. T/ SMART FOR TWO 0.6

Oferta produktu marki HART LOZYSKA DO PIAST /T/ SMART FOR TWO 0.6 Zastosowanie i szczegóły produktu w sekcji powyżej. Informacje dotyczące produktu: Szerokość [mm]: 72,8 Średnica wewnętrzna [mm]: 21,7 średnica zewnętrzna [mm]: 133,5 Producent: HART GenArtName: Zestaw łożysk koła EAN: 5907643023104 Firma HART powstała w 1990 roku i od tego momentu dynamicznie się rozwija HART Premium łączy w sobie trzy istotne cechy: wysoką jakość, precyzję wykonania i atrakcyjny efekt wizualny HART jako prekursor towarów brandowych na polskim rynku może także pochwalić się najszerszą ich ofertą. Przygotuj pełne dane swojego samochodu (wszystkie informacje znajdują się na pierwszej stronie dowodu rejestracyjnego): Marka Model Wersja silnikowa Rok produkcji oraz VIN A my upewnimy się, że otrzymasz właśnie tę część, której właśnie potrzebujesz!

PLN 177.26

1

VAICO PRZEWÓD WSPOMAGANIA V10-1768

Informacje o produkcie: Producent: VAICO GenArtName: Wąż hydrauliczny, system kierowania EAN: 4046001913358 Numery oryginalne OE: 10013 186139 2361085 57193 6Q1 423 891 H 6Q1 423 891 H 6Q1 423 891 H 6Q1423891E 6Q1423891F Zastosowano w pojazdach: SEAT IBIZA III (6L1) SEAT IBIZA III (6L1) 1.2 02.2002 - 06.2006 47kW / 64KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.4 16V 02.2002 - 11.2009 74kW / 100KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.9 TDI 02.2002 - 11.2009 74kW / 100KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.9 TDI 02.2002 - 11.2009 96kW / 131KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.4 16V 02.2002 - 12.2007 55kW / 75KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.9 SDI 02.2002 - 12.2005 47kW / 64KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.4 TDI 05.2002 - 12.2005 55kW / 75KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.8 T Cupra R 01.2004 - 02.2008 132kW / 180KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.8 T FR 12.2003 - 05.2008 110kW / 150KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.6 02.2003 - 11.2009 74kW / 101KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.4 TDI 05.2005 - 11.2009 51kW / 70KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.4 TDI 06.2005 - 11.2009 59kW / 80KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.2 12V 05.2006 - 11.2009 51kW / 70KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 2.0 04.2002 - 11.2009 85kW / 116KM (Parametr For Edelmann #10013) SEAT IBIZA III (6L1) 1.4 16V 05.2006 - 11.2009 63kW / 86KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) SEAT CORDOBA (6L2) 1.2 10.2002 - 06.2006 47kW / 64KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.4 16V 09.2002 - 12.2007 55kW / 75KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.9 TDI 10.2002 - 11.2009 96kW / 131KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.9 TDI 09.2002 - 11.2009 74kW / 100KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.4 16V 10.2002 - 11.2009 74kW / 100KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.4 TDI 10.2002 - 12.2005 55kW / 75KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.6 04.2003 - 11.2009 74kW / 101KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 2.0 09.2002 - 11.2009 85kW / 115KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.4 TDI 05.2005 - 11.2009 51kW / 70KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.4 TDI 06.2005 - 11.2009 59kW / 80KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.2 12V 05.2006 - 11.2009 51kW / 70KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.4 16V 05.2006 - 11.2009 63kW / 86KM (Parametr For Edelmann #10013) SEAT CORDOBA (6L2) 1.6 16V 11.2006 - 11.2009 77kW / 105KM (Parametr For Edelmann #10013) SKODA FABIA I (6Y2) SKODA FABIA I (6Y2) 1.4 16V 12.1999 - 03.2008 74kW / 100KM (Parametr For Edelmann #10013, Rok prod. od 05.2004) SKODA FABIA I (6Y2) 1.4 08.1999 - 05.2003 50kW / 68KM (Parametr For Edelmann #10013) SKODA FABIA I (6Y2) 1.9 SDI 12.1999 - 03.2008 47kW / 64KM (Parametr For Edelmann #10013) SKODA FABIA I (6Y2) 1.9 TDI 01.2000 - 03.2008 74kW / 100KM (Parametr For Edelmann #10013, Rok prod. od 05.2004) SKODA FABIA I (6Y2) 1.4 08.2000 - 08.2002 44kW / 60KM (Parametr For Edelmann #10013) SKODA FABIA I (6Y2) 1.4 16V 12.1999 - 03.2008 55kW / 75KM (Parametr For Edelmann #10013, Rok prod. od 05.2004) SKODA FABIA I (6Y2) 2.0 12.1999 - 03.2008 85kW / 116KM (Parametr For Edelmann #10013, Rok prod. od 05.2004) SKODA FABIA I (6Y2) 1.2 07.2001 - 04.2007 40kW / 54KM (Parametr For Edelmann #10013) SKODA FABIA I (6Y2) 1.2 01.2003 - 03.2008 47kW / 64KM (Parametr For Edelmann #10013, Rok prod. od 05.2004) SKODA FABIA I (6Y2) 1.9 TDI RS 06.2003 - 03.2008 96kW / 130KM (Parametr For Edelmann #10013, Rok prod. od 05.2004) SKODA FABIA I (6Y2) 1.4 TDI 04.2003 - 03.2008 55kW / 75KM (Parametr For Edelmann #10013) SKODA FABIA I (6Y2) 1.4 TDI 10.2005 - 03.2008 51kW / 70KM (Parametr For Edelmann #10013) SKODA FABIA I (6Y2) 1.4 TDI 10.2005 - 03.2008 59kW / 80KM (Parametr For Edelmann #10013) SKODA FABIA I Combi (6Y5) SKODA

PLN 179.33

1

SIDEM SWORZEŃ WAHACZA P407 04- /L+P/ /DOL/

SIDEM SWORZEŃ WAHACZA P407 04- /L+P/ /DOL/ #10003; Podstawowe parametry Strona zabudowy: Oś przednia, na dole Tylko w połączeniu z: Patented for DE-FR Typy referencyjne: wymienialny #10003; Występuje w pojazdach Citroen C5 III (RD_) 1.6 HDi 110 (9HL (DV6C) 9HR (DV6C)) 1560ccm 112KM/82kW 2010/07-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 1.6 HDi 110 (9HZ (DV6TED4)) 1560ccm 109KM/80kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 1.6 HDi 115 (9HL (DV6C) 9HR (DV6C)) 1560ccm 114KM/84kW 2012/01-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 1.6 THP 150 (5FN (EP6CDT)) 1598ccm 150KM/110kW 2010/07-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 1.6 THP 155 (5FV (EP6CDT)) 1598ccm 156KM/115kW 2009/04-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 1.6 VTi 120 (5FS (EP6C)) 1598ccm 120KM/88kW 2010/07-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 1.8 16V (6FY (EW7A)) 1749ccm 125KM/92kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.0 16V (RFJ (EW10A)) 1997ccm 140KM/103kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.0 16V BioFlex (RFJ (EW10A)) 1997ccm 140KM/103kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.0 HDi (RHF (DW10BTED4) RHR (DW10BTED4)) 1997ccm 136KM/100kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.0 HDi 140 (RHF (DW10BTED4)) 1997ccm 140KM/103kW 2008/11-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.0 HDi 150 / BlueHDi 150 (AHR (DW10FD) RHE (DW10CTED4)) 1997ccm 150KM/110kW 2009/04-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.0 HDi 165 (RHH (DW10CTED4)) 1997ccm 163KM/120kW 2009/04-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.0 HDi 180 (AHW (DW10FC)) 1997ccm 181KM/133kW 2015/03-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.2 HDi (4HT (DW12BTED4)) 2179ccm 170KM/125kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.2 HDi 200 (4HL (DW12C)) 2179ccm 204KM/150kW 2010/07-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 2.7 HDi (UHZ (DT17TED4)) 2720ccm 204KM/150kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 3.0 HDi 240 (DT20C) 2992ccm 241KM/177kW 2009/04-2014/10, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III (RD_) 3.0 V6 (XFU (ES9A) XFV (ES9A)) 2946ccm 211KM/155kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 1.6 HDi 110 (9HL (DV6C) 9HR (DV6C)) 1560ccm 112KM/82kW 2010/07-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 1.6 HDi 110 (9HZ (DV6TED4)) 1560ccm 109KM/80kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 1.6 HDi 115 (9HL (DV6C) 9HR (DV6C)) 1560ccm 114KM/84kW 2012/01-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 1.6 THP 150 (5FN (EP6CDT)) 1598ccm 150KM/110kW 2009/04-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 1.6 THP 155 (5FV (EP6CDT)) 1598ccm 156KM/115kW 2009/04-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 1.6 VTI 120 (5FS (EP6C)) 1598ccm 120KM/88kW 2010/07-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 1.8 16V (6FY (EW7A)) 1749ccm 125KM/92kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 2.0 16V (RFJ (EW10A)) 1997ccm 140KM/103kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 2.0 16V BioFlex (RFJ (EW10A)) 1997ccm 140KM/103kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 2.0 HDi (RHR (DW10BTED4)) 1997ccm 136KM/100kW 2008/02-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 2.0 HDi 140 (RHF (DW10BTED4)) 1997ccm 140KM/103kW 2009/04-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 2.0 HDi 150 / BlueHDi 150 (AHR (DW10FD) RHE (DW10CTED4)) 1997ccm 150KM/110kW 2009/04-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 2.0 HDi 165 (RHH (DW10CTED4)) 1997ccm 163KM/120kW 2009/04-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen C5 III Break (RW_) 2.0 HDi 180 (AHW (DW10FC)) 1997ccm 181KM/133kW 2015/03-, szczegóły: Opcja wyposażenia: Patented for DE-FR Citroen&

PLN 399.72

1

HART CHŁODNICA DO KLIMAT.SMART FOR TWO 07- 621607

HART CHŁODNICA DO KLIMAT.SMART FOR TWO 07- 621607 #10003; Podstawowe parametry #10003; Występuje w pojazdach Smart FORTWO Cabrio (451) 0.8 CDi (451.400) (OM 660.950) 799ccm 45KM/33kW 2007/01- Smart FORTWO Cabrio (451) 0.8 CDi (451.401) (OM 660.951) 799ccm 54KM/40kW 2009/08- Smart FORTWO Cabrio (451) 1.0 (451.431, 451.480) (M 132.910) 999ccm 71KM/52kW 2007/01- Smart FORTWO Cabrio (451) 1.0 Brabus (451.433) (M 132.930) 999ccm 98KM/72kW 2008/01- Smart FORTWO Cabrio (451) 1.0 Brabus (M 132.930) 999ccm 120KM/88kW 2012/04- Smart FORTWO Cabrio (451) 1.0 Turbo (451.432) (M 132.930) 999ccm 84KM/62kW 2007/01- Smart FORTWO Cabrio (451) 1.0 Turbo Brabus (451.433) (M 132.930) 999ccm 102KM/75kW 2010/07- Smart FORTWO Cabrio (451) electric drive (451.490) (EV) 48KM/35kW 2011/12-2012/12 Smart FORTWO Cabrio (451) electric drive (451.490, 451.491) (EV) 27KM/20kW 2010/12-2012/12 Smart FORTWO Cabrio (451) electric drive (451.490, 451.491) (EV) 75KM/55kW 2013/01- Smart FORTWO Cabrio (451) electric drive (451.491) (EV) 41KM/30kW 2009/11-2011/12 Smart FORTWO Cabrio (451) electric drive Brabus (451.492) (EV) 82KM/60kW 2013/01- Smart FORTWO coupe (451) 0.8 CDi (451.300) (OM 660.950) 799ccm 45KM/33kW 2007/01- Smart FORTWO coupe (451) 0.8 CDi (451.301) (OM 660.951) 799ccm 54KM/40kW 2009/08- Smart FORTWO coupe (451) 1.0 (451.330, 451.334) (M 132.910) 999ccm 61KM/45kW 2007/01- Smart FORTWO coupe (451) 1.0 (451.331, 451.380) (M 132.910) 999ccm 71KM/52kW 2007/01- Smart FORTWO coupe (451) 1.0 Brabus (451.333) (M 132.930) 999ccm 98KM/72kW 2008/01- Smart FORTWO coupe (451) 1.0 Turbo (451.332) (M 132.930) 999ccm 84KM/62kW 2007/01- Smart FORTWO coupe (451) 1.0 Turbo Brabus (451.333) (M 132.930) 999ccm 102KM/75kW 2010/07- Smart FORTWO coupe (451) electric drive (451.390) (EV) 48KM/35kW 2011/12-2012/12 Smart FORTWO coupe (451) electric drive (451.390, 451.391) (EV) 75KM/55kW 2013/01- Smart FORTWO coupe (451) electric drive (451.391) (EV) 41KM/30kW 2009/11-2011/12 Smart FORTWO coupe (451) electric drive (451.391, 451.390) (EV) 27KM/20kW 2010/12-2012/12 Smart FORTWO coupe (451) electric drive Brabus (451.392) (EV) 82KM/60kW 2013/01- #10003; Numery OE SMART 4515000154

PLN 266.94

1

SKF VKML 91000 Zestaw łańcucha rozrządu

Na sprzedaż: ZESTAW ŁAŃCUCHA ROZRZĄDU TOYOTA COROLLA-AVENSIS 1.6 VVT-I 1 zestaw / 1 opakowanie (Kod produktu: VKML91000) Parametry: Producent części:SKF Numer katalogowy części:VKML 91000 EAN (GTIN):7316576863837 Producent SKF SKF to renomowany producent i dostawca łożysk oraz rozwiązań z zakresu uszczelnień, smarowania, systemów mechatronicznych i usług serwisowych. Firma ma długą historię i bogate doświadczenie w branży, zapewniając wysoką jakość i niezawodność swoich produktów. SKF znany jest ze swojej doskonałej inżynierii, innowacyjności i zaangażowania w rozwój technologiczny. Ich produkty znajdują zastosowanie w różnych branżach, w tym w przemyśle motoryzacyjnym. SKF jest synonimem jakości i profesjonalizmu, a ich produkty są cenione przez klientów na całym świecie. Numery katalogowe zamienników: FAI AutoParts TCK35WO FAI AutoParts TCK59VVT KAMOKA 7001547 KAMOKA 7001636 MABYPARTS OTK030007 MABYPARTS OTK031007 Saleri SIL CK5064 Saleri SIL CK5148 Vitobello Ricambi KDC0005-2N WILMINK GROUP WG1055125 WILMINK GROUP WG1488176 WILMINK GROUP WG1488177 WILMINK GROUP WG1779777 WILMINK GROUP WG1780002 WILMINK GROUP WG1909975 WILMINK GROUP WG1910020 WILMINK GROUP WG1966537 WILMINK GROUP WG2223098 WILMINK GROUP WG2223099 WILMINK GROUP WG2225259 Numer katalogowy oryginału: TOYOTA 13506-0D020 TOYOTA 13506-22030 TOYOTA 13540-0D020 TOYOTA 13540-0D030 TOYOTA 13540-22022 Pasuje do: Toyota AURIS (_E15_) 1.4 (ZZE150_) (4ZZ-FE) 1398ccm 97HP/71kW 2007/03-2012/09, details: Construction year to: 2008/12, for model code: ZZE150 Toyota AVENSIS (_T22_) 1.6 VVT-i (ZZT220_) (3ZZ-FE) 1598ccm 110HP/81kW 2000/10-2003/02, details: Engine Code: 3ZZ-FE, for model code: ZZT220 Toyota AVENSIS (_T22_) 1.8 VVT-i (ZZT221_) (1ZZ-FE) 1794ccm 129HP/95kW 2000/10-2003/02, details: Engine Code: 1ZZ-FE, for model code: ZZT221 Toyota AVENSIS (_T25_) 1.6 VVT-i (ZZT250_) (3ZZ-FE) 1598ccm 110HP/81kW 2003/04-2008/11, details: for model code: ZZT250 Toyota AVENSIS (_T25_) 1.8 (ZZT251_) (1ZZ-FE) 1794ccm 129HP/95kW 2003/03-2008/10, details: for model code: ZZT251 Toyota AVENSIS Estate (_T22_) 1.6 (ZZT220_) (3ZZ-FE) 1598ccm 110HP/81kW 2000/07-2003/02, details: for model code: ZZT220 Toyota AVENSIS Estate (_T22_) 1.8 (ZZT221_) (1ZZ-FE) 1794ccm 129HP/95kW 2000/10-2003/02, details: for model code: ZZT221 Toyota AVENSIS Estate (_T25_) 1.6 VVT-i (ZZT250_) (3ZZ-FE) 1598ccm 110HP/81kW 2003/04-2008/11, details: for model code: ZZT250 Toyota AVENSIS Estate (_T25_) 1.8 (ZZT251_) (1ZZ-FE) 1794ccm 129HP/95kW 2003/04-2008/11, details: for model code: ZZT251 Toyota AVENSIS Liftback (_T22_) 1.6 (ZZT220_) (3ZZ-FE) 1598ccm 110HP/81kW 2000/10-2003/02, details: for model code: ZZT220 Toyota AVENSIS Liftback (_T22_) 1.8 (ZZT221_) (1ZZ-FE) 1794ccm 129HP/95kW 2000/10-2003/02, details: for model code: ZZT221 Toyota AVENSIS Saloon (_T25_) 1.6 VVT-i (ZZT250_) (3ZZ-FE) 1598ccm 110HP/81kW 2003/04-2008/11, details: for model code: ZZT250 Toyota AVENSIS Saloon (_T25_) 1.8 (ZZT251_) (1ZZ-FE) 1794ccm 129HP/95kW 2003/04-2008/11, details: for model code: ZZT251 Toyota CELICA Coupe (_T23_) 1.8 16V VT-i (ZZT230_) (1ZZ-FE) 1794ccm 143HP/105kW 1999/08-2005/07, details: for model code: ZZT230 Toyota COROLLA (_E11_) 1.4 16V (ZZE111_) (4ZZ-FE) 1398ccm 97HP/71kW 2000/02-2001/11, details: for model code: ZZE11# Toyota COROLLA (_E11_) 1.6 16V (ZZE112_) (3ZZ-FE) 1598ccm 110HP/81kW 1999/10-2001/12, details: for model code: ZZE11# Toyota COROLLA (_E12_) 1.4 VVT-i (ZZE120_) (4ZZ-FE) 1398ccm 97HP/71kW 2001/11-2007/02, details: for model code: ZZE120 Toyota COROLLA (_E12_) 1.6 VVT-i (ZZE121_) (3ZZ-FE) 1598ccm 110HP/81kW 2002/01-2006/12, details: for model code: ZZE121 Toyota COROLLA (_E12_) 1.8 4WD (ZZE124) (1ZZ-FE) 1794ccm 136HP/100kW 2001/01-2007/02, details: for model code: ZZE124 Toyota COROLLA Compact (_E11_) 1.4 (ZZE111_) (4ZZ-FE) 1398ccm 97HP/71kW 1999/10-2002/01, details: for model code: ZZE11# Toyota COROLLA Compact (_E11_) 1.6 (ZZE112_) (3ZZ-FE) 1598ccm 110HP/81kW 1999/10-2001/10, details: for model code: ZZE11# Toyota COROLLA Estate (_E11_) 1.4 16V (ZZE111_) (4ZZ-FE) 1398ccm 97HP/71kW 2000/02-2001/10, details: for model code: ZZE11# Toyota COROLLA Estate (_E11_) 1.6 16V (ZZE112_) (3ZZ-FE) 1598ccm 110HP/81kW 2000/02-2001/10, details: for model code: ZZE11# Toyota COROLLA Estate (_E12_) 1.4 VVT-i (ZZE120_) (4ZZ-FE) 1398ccm 97HP/71kW 2002/01-2007/02, details: for model code: ZZE120 Toyota COROLLA Estate (_E12_) 1.6

PLN 664.08

1

900 207 ZESTAW OCHRONY PRZECIWPYŁOWEJ AMORTYZATO Sachs 900 207 Zestaw

Na sprzedaż: ZESTAW MONTAŻOWY AMORTYZATORA FORD P. MONDEO 07- ODBOJEOSŁONY Ilość: 1 zestaw Kod produktu: 900 207 Parametry: Producent części: Sachs Numer katalogowy części: 900 207 Typ samochodu: Samochody osobowe EAN (GTIN): 4013872740468 SACHS Firma SACHS specjalizuje się w produkcji amortyzatorów, sprzęgieł, tłumików oraz innych komponentów zawieszenia i układu napędowego. Produkty SACHS wyróżniają się innowacyjnymi rozwiązaniami technologicznymi, solidną konstrukcją i doskonałą jakością wykonania. SACHS stawia na ciągły rozwój i doskonalenie swoich produktów, aby spełniać wymagania nowoczesnych pojazdów i zapewniać maksymalną wydajność i bezpieczeństwo. Firma cieszy się uznaniem zarówno wśród producentów samochodowych, jak i wśród właścicieli pojazdów oraz warsztatów naprawczych. Pasuje do: Ford MONDEO IV (BA7) 1.6 EcoBoost (JTBA JTBB) 1596ccm 160HP/118kW 2011/02-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 1.6 Ti (KGBA) 1596ccm 120HP/88kW 2010/07-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 1.6 Ti (PNBA) 1596ccm 125HP/92kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 1.6 Ti (RHBA) 1596ccm 110HP/81kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 1.8 TDCi (FFBA) 1753ccm 100HP/74kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 1.8 TDCi (KHBA QYBA) 1753ccm 125HP/92kW 2007/06-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 (AOBA AOBC TBBA TBBB) 1999ccm 145HP/107kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 EcoBoost (TPBA) 1999ccm 240HP/176kW 2010/07-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 Flexifuel (TBBA TBBB) 1999ccm 145HP/107kW 2009/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 LPG (TBBA TBBB) 1999ccm 145HP/107kW 2009/07-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 SCTi (TNBA) 1999ccm 203HP/149kW 2010/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 TDCi (AZBA) 1997ccm 130HP/96kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 TDCi (AZBC UKBA UKBB) 1997ccm 136HP/100kW 2007/03-2014/12, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 TDCi (KLBA LPBA TYBA) 1997ccm 115HP/85kW 2007/11-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 TDCi (QXBA QXBB UFBA UFBB) 1997ccm 140HP/103kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.0 TDCi (TXBA TXBB) 1997ccm 163HP/120kW 2010/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.2 TDCi (KNBA) 2179ccm 200HP/147kW 2010/07-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.2 TDCi (Q4BA) 2179ccm 175HP/129kW 2008/03-2010/10, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.3 (SEBA) 2261ccm 160HP/118kW 2007/07-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV (BA7) 2.5 (HUBA) 2521ccm 220HP/162kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV Saloon (BA7) 1.6 TDCi (T1BA T1BB T1BC) 1560ccm 115HP/85kW 2010/12-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV Saloon (BA7) 1.6 Ti (PNBA) 1596ccm 125HP/92kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV Saloon (BA7) 1.6 Ti (RHBA) 1596ccm 110HP/81kW 2007/03-2015/01, details: Fitting Position: Front Axle, Suspension: for vehicles with standard suspension Ford MONDEO IV Saloon (BA7) 1.8 TDCi (

PLN 54.34

2

TRW BWD302 Cylinderek hamulcowy

Na sprzedaż:CYLINDEREK HAM. RENAULT MEGANE 1.4-2.0 96-03 LE-PRIlość: 1 sztukaKod produktu: BWD302Parametry:Producent części: TRWNumer katalogowy części: BWD302Typ samochodu: Samochody osoboweEAN (GTIN): 3322937275540TRWTRW Automotive to renomowany producent części samochodowych, który od lat cieszy się zaufaniem klientów na całym świecie. Firma jest liderem w dziedzinie klocków i tarcz hamulcowych, oferuje szeroki zakres produktów, które zwiększają bezpieczeństwo i komfort jazdy.Pasuje do:Renault MEGANE I (BA0/1_) 1.4 16V (BA0D, BA1H, BA0W, BA10) (K4J 714 K4J 750) 1390ccm 95HP/70kW 1999/03-2003/08, details: Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABS, for vehicles without ESPRenault MEGANE I (BA0/1_) 1.4 e (BA0E, BA0V) (E7J 626 E7J 764) 1390ccm 75HP/55kW 1996/01-2003/08, details: Construction year from: 1999/03, Construction year to: 2000/09, Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I (BA0/1_) 1.6 16V (BA04, BA0B, BA11, BA1J, BA16, BA19, BA1K, BA1V,… (K4M 700 K4M 701 K4M 706 K4M 708 K4M 709) 1598ccm 107HP/79kW 1999/03-2002/08, details: Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I (BA0/1_) 1.9 D Eco (BA0A, BA0U, BA0R) (F8Q 620 F8Q 622 F8Q 624) 1870ccm 64HP/47kW 1996/01-2003/08, details: Construction year from: 1999/03, Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I (BA0/1_) 1.9 dCi (BA05, BA1F) (F9Q 732 F9Q 733) 1870ccm 102HP/75kW 2001/02-2003/08, details: Construction year to: 2003/07, Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I (BA0/1_) 1.9 dTi (BA1U) (F9Q 744) 1870ccm 80HP/59kW 2001/02-2003/08, details: Construction year to: 2003/07, Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I Cabriolet (EA0/1_) 1.4 16V (EA0D, EA1H, EA0W, EA10) (K4J 714 K4J 750) 1390ccm 95HP/70kW 1999/03-2003/08, details: Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I Cabriolet (EA0/1_) 1.6 16V (EA04, EA0B, EA11, EA1J) (K4M 700 K4M 701 K4M 708 K4M 709) 1598ccm 107HP/79kW 1999/03-2003/07, details: Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABS, for vehicles without ESPRenault MEGANE I Classic (LA0/1_) 1.9 dTi (LA08, LA0N) (F9Q 730 F9Q 731 F9Q 734 F9Q 736) 1870ccm 98HP/72kW 1997/03-2001/02, details: Construction year from: 1999/03, Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I Classic (LA0/1_) 2.0 RT 1998ccm 152HP/112kW 1996/10-1999/02, details: Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I Coach (DA0/1_) 1.4 16V (DA0D, DA1H, DA0W, DA10) (K4J 700 K4J 714 K4J 750) 1390ccm 95HP/70kW 1999/03-2003/07, details: Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I Coach (DA0/1_) 1.6 16V (DA0B, DA04, DA11) (K4M 700 K4M 701 K4M 708 K4M 709) 1598ccm 107HP/79kW 1999/03-2003/07, details: Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABS, for vehicles without ESPRenault MEGANE I Coach (DA0/1_) 1.9 dCi (DA05, DA1F) (F9Q 732 F9Q 733) 1870ccm 102HP/75kW 2001/02-2003/08, details: Construction year to: 2003/07, Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I Coach (DA0/1_) 1.9 DCi (F9Q 732 F9Q 733) 1870ccm 105HP/77kW 1999/03-2000/09, details: Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSRenault MEGANE I Coach (DA0/1_) 1.9 dTi (DA0N) (F9Q 731 F9Q 734 F9Q 736) 1870ccm 98HP/72kW 1997/03-2001/02, details: Construction year from: 1999/03, Construction year to: 2000/09, Fitting Position: Rear Axle, Braking / Drive Dynamics: for vehicles with ABSDobieraj części po numerze VIN.W jednym modelu auta mogą występować różne warianty tej samej części, dlatego ostateczne dopasowanie powinno zostać sprawdzone w katalogu po numerze VIN(!)

PLN 52.83

1

Continental CT1244 Pasek rozrządu

Na sprzedaż:PASEK ROZRZĄDU RENAULT 1.5 BLUE DCI 119Z 27MMIlość: 1 sztukaKod produktu: CT1244Parametry:Producent części: ContinentalNumer katalogowy części: CT1244Typ samochodu: Samochody dostawcze,Samochody osoboweEAN (GTIN): 4010858994099Pasuje do:Dacia DOKKER Express Box Body/MPV 1.5 Blue dCi 95 (FEJL) (K9K 872) 1461ccm 95HP/70kW 2019/06-, details: Driven Units: Camshaft, for OE number: 130288608RDacia DOKKER MPV (KE_) 1.5 Blue dCi 95 (KEJL) (K9K 872) 1461ccm 95HP/70kW 2018/12-, details: Driven Units: Camshaft, for OE number: 130288608RDacia DUSTER (HM_) 1.5 dCi 115 (HMAD) (K9K 872 K9K 876) 1461ccm 116HP/85kW 2017/10-, details: Driven Units: Camshaft, for OE number: 130288608RDacia DUSTER (HM_) 1.5 dCi 115 4x4 (HMAD) (K9K 874 K9K 878) 1461ccm 116HP/85kW 2017/10-, details: Driven Units: Camshaft, for OE number: 130288608RDacia DUSTER (HM_) 1.5 dCi 115 4x4 (K9K 874) 1461ccm 114HP/84kW 2022/01-, details: Driven Units: CamshaftDacia DUSTER (HM_) 1.5 dCi 95 (HMAF) (K9K 872) 1461ccm 95HP/70kW 2017/10-, details: Driven Units: Camshaft, for OE number: 130288608RDacia LODGY (JS_) 1.5 Blue dCi 115 (JSJT) (K9K 872) 1461ccm 116HP/85kW 2018/08-, details: Driven Units: Camshaft, for OE number: 130288608RDacia LODGY (JS_) 1.5 Blue dCi 95 (JSJL, JSN7) (K9K 872 K9K 876) 1461ccm 95HP/70kW 2018/08-, details: for model code: Lodgy, Lodgy Stepway, Driven Units: Camshaft, for OE number: 130288608R, Block Separation: , Construction Year from: 2019/06Dacia LOGAN II 1.5 Blue dCi 95 (L8JL) (K9K 872) 1461ccm 95HP/70kW 2018/05-, details: Driven Units: Camshaft, for OE number: 130288608RDacia LOGAN MCV II 1.5 Blue dCi 95 (K8JL) (K9K 872) 1461ccm 95HP/70kW 2018/10-, details: Driven Units: Camshaft, for OE number: 130288608RDacia SANDERO II 1.5 Blue dCi 95 (B8JL) (K9K 872) 1461ccm 95HP/70kW 2018/08-, details: Driven Units: Camshaft, for OE number: 130288608RMercedes-Benz CITAN Box Body/MPV (W415) 108 CDI (415.603) (OM 608.915 (K9K)) 1461ccm 80HP/59kW 2019/05-2021/08, details: Driven Units: Camshaft, Quantity: 1, Engine number: OM 608.915 (K9K)Mercedes-Benz CITAN Box Body/MPV (W415) 109 CDI (415.603, 415.605) (OM 608.915 (K9K)) 1461ccm 95HP/70kW 2019/05-2021/08, details: Driven Units: Camshaft, Quantity: 1, Engine number: OM 608.915 (K9K)Mercedes-Benz CITAN Box Body/MPV (W415) 111 CDI (415.603, 415.605) (OM 608.915 (K9K)) 1461ccm 116HP/85kW 2019/05-2021/08, details: Driven Units: Camshaft, Quantity: 1, Engine number: OM 608.915 (K9K)Mercedes-Benz CITAN Box Body/MPV (W420) 1.5 108 CDI (420.613) (OM 608.915 (K9K)) 1461ccm 75HP/55kW 2021/09-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz CITAN Box Body/MPV (W420) 1.5 110 CDI (420.623, 420.625) (OM 608.915 (K9K)) 1461ccm 95HP/70kW 2021/09-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz CITAN Box Body/MPV (W420) 1.5 112 CDI (420.633, 420.635) (OM 608.915 (K9K)) 1461ccm 116HP/85kW 2021/09-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz CITAN MPV (W415) 108 CDI (415.703) (OM 608.915 (K9K)) 1461ccm 80HP/59kW 2019/02-2021/08, details: Driven Units: Camshaft, Quantity: 1, Engine number: OM 608.915 (K9K)Mercedes-Benz CITAN MPV (W415) 109 CDI (415.703) (OM 608.915 (K9K)) 1461ccm 95HP/70kW 2019/02-2021/08, details: Driven Units: Camshaft, Quantity: 1, Engine number: OM 608.915 (K9K)Mercedes-Benz CITAN MPV (W415) 111 CDI (415.703) (OM 608.915 (K9K)) 1461ccm 116HP/85kW 2019/02-2021/08, details: Driven Units: Camshaft, Quantity: 1, Engine number: OM 608.915 (K9K)Mercedes-Benz CITAN Tourer (W420) 108 CDI (420.713) (OM 608.915 (K9K)) 1461ccm 75HP/55kW 2021/09-, details: Driven Units: Camshaft, Quantity: QUA01, Engine number: OM 608.915 (K9K)Mercedes-Benz CITAN Tourer (W420) 110 CDI (420.723) (OM 608.915 (K9K)) 1461ccm 95HP/70kW 2021/09-, details: Driven Units: Camshaft, Quantity: QUA01, Engine number: OM 608.915 (K9K)Mercedes-Benz CITAN Tourer (W420) 112 CDI (420.733) (OM 608.915 (K9K)) 1461ccm 116HP/85kW 2021/09-, details: Driven Units: Camshaft, Quantity: QUA01, Engine number: OM 608.915 (K9K)Mercedes-Benz CLA (C118) CLA 180 d (118.303) (OM 608.915) 1461ccm 116HP/85kW 2019/03-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz CLA Shooting Brake (X118) CLA 180 d (118.603) (OM 608.915 (K9K)) 1461ccm 116HP/85kW 2019/06-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz A-CLASS (W177) A 160 d (177.002) (OM 608.915 (K9K)) 1461ccm 95HP/70kW 2019/05-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz A-CLASS (W177) A 180 d (177.003) (OM 608.915 (K9K)) 1461ccm 116HP/85kW 2018/03-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz A-CLASS Saloon (V177) A 160 d (177.102) (OM 608.915) 1461ccm 95HP/70kW 2019/10-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz A-CLASS Saloon (V177) A 180 d (177.103) (OM 608.915 (K9K)) 1461ccm 116HP/85kW 2018/09-, details: Driven Units: Camshaft, for OE number: A6089930000Mercedes-Benz

PLN 106.61

1

Sachs 350 388 Amortyzator

Na sprzedaż:AMORTYZATOR MITSUBISHI T. OUTLANDER 06--C-CROSSER-4007Ilość: 1 sztukaKod produktu: 350 388Parametry:Producent części: SachsNumer katalogowy części: 350 388Strona zabudowy: tyłRodzaj: Olejowo-gazoweTyp samochodu: Samochody osoboweJakość części (zgodnie z GVO): Q - oryginał z logo producenta części (OEM, OES)Waga produktu: 1.77Rodzaj zawieszenia: brak informacjiEAN (GTIN): 4059923056263SACHSFirma SACHS specjalizuje się w produkcji amortyzatorów, sprzęgieł, tłumików oraz innych komponentów zawieszenia i układu napędowego. Produkty SACHS wyróżniają się innowacyjnymi rozwiązaniami technologicznymi, solidną konstrukcją i doskonałą jakością wykonania. SACHS stawia na ciągły rozwój i doskonalenie swoich produktów, aby spełniać wymagania nowoczesnych pojazdów i zapewniać maksymalną wydajność i bezpieczeństwo. Firma cieszy się uznaniem zarówno wśród producentów samochodowych, jak i wśród właścicieli pojazdów oraz warsztatów naprawczych.Pasuje do:Citroen C-CROSSER (VU_, VV_) 2.2 HDi (4HN (DW12MTED4) 4HK (DW12ME5)) 2179ccm 156HP/115kW 2007/02-, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionCitroen C-CROSSER (VU_, VV_) 2.4 16V (SFZ (4B12 MMC)) 2360ccm 170HP/125kW 2008/08-, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionCitroen C-CROSSER ENTERPRISE (VU_, VV_) 2.4 16V (4B12) 2360ccm 170HP/125kW 2009/01-, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionMitsubishi OUTLANDER II (CW_W) 2.0 DI-D (BSY) 1968ccm 140HP/103kW 2007/02-2012/11, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionMitsubishi OUTLANDER II (CW_W) 2.2 DI-D (4N14) 2268ccm 177HP/130kW 2006/11-2012/11, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionMitsubishi OUTLANDER II (CW_W) 2.2 DI-D 4WD (4HN 4HK) 2179ccm 156HP/115kW 2007/08-2012/11, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionMitsubishi OUTLANDER II (CW_W) 2.2 DI-D 4WD (4N14) 2268ccm 140HP/103kW 2010/09-2012/11, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionMitsubishi OUTLANDER II (CW_W) 2.2 DI-D 4WD (4N14) 2268ccm 177HP/130kW 2006/11-2012/11, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionMitsubishi OUTLANDER II (CW_W) 2.4 (CW5W) (4B12) 2360ccm 170HP/125kW 2006/11-2012/11, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionMitsubishi OUTLANDER II (CW_W) 2.4 4WD (CW5W) (4B12) 2360ccm 170HP/125kW 2007/09-2012/11, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionMitsubishi OUTLANDER II (CW_W) 3.0 4WD (6B31) 2998ccm 230HP/169kW 2010/09-2012/12, details: Fitting Position: Rear Axle, Check OE number:Mitsubishi OUTLANDER II (CW_W) 3.0 4WD (CW6W) (6B31) 2998ccm 220HP/162kW 2006/11-2012/11, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionPeugeot 4007 (VU_, VV_) 2.2 HDi (4HK (DW12ME5) 4HN (DW12MTED4)) 2179ccm 156HP/115kW 2007/02-2013/03, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionPeugeot 4007 (VU_, VV_) 2.4 16V (SFY (4B12-MMC) SFZ (4B12-MMC)) 2360ccm 170HP/125kW 2007/02-2013/03, details: Fitting Position: Rear Axle, Suspension: for vehicles with standard suspensionDobieraj części po numerze VIN.W jednym modelu auta mogą występować różne warianty tej samej części, dlatego ostateczne dopasowanie powinno zostać sprawdzone w katalogu po numerze VIN(!)

PLN 125.96

1

Naklejki na rogi do zdjęć, naklejki na albumy z

120x Self Adhesive Photo Album Corner Protector Stickers Scrapbooking DIY Black Description: Photo corner stickers are a very effective, reversible way of securing and decorate photos.It is a must-have accessory for photos album and . 5 sheets of PVC paper pack. Each sheet has 24 pieces of sticker. Essential item for making photo album. Size of each corner: 2x2cm Size of each sheet: 12.3x8.8cm Material: Paper Package Includes: 5 Sheets Paper Photo Corners(120pcs)

PLN 73.77

1

Żarówki Hart 520 494 R5W 5 W 10 szt.

Żarówka POMOCN.24V R5W RURK. /10SZT Hart 520 494 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka POMOCN.24V R5W RURK. /10SZT Hart 520 494: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 8.67

1

Żarówki Hart W5W 5 W 10 szt.

Żarówka CALOSZKL.24V W5W /10SZT Hart 521 689Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka CALOSZKL.24V W5W /10SZT Hart 521 689:There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs:1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens).2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam.3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics.4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts.5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature.6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K.7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V.Types of auxiliary light bulbs:1. The prefix T indicates a base that is flush with the bulb (e.g., T4W).2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W).3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps.4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W).5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights.In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook.If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points:The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base;"BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs);"BAU" - indicates radial misalignment of the base pin;The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter).One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin.Halogen bulbs emit yellowish light because their temperature range is 3000-4300K.

PLN 4.75

1

Żarówki Philips H4 2 szt.

Żarówka halogenowa Philips VisionPlus +60% H4 12V 60/55W (2 szt.)Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka halogenowa Philips VisionPlus +60% H4 12V 60/55W (2 szt.):There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs:1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens).2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam.3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics.4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts.5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature.6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K.7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V.Types of auxiliary light bulbs:1. The prefix T indicates a base that is flush with the bulb (e.g., T4W).2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W).3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps.4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W).5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights.In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook.If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points:The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base;"BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs);"BAU" - indicates radial misalignment of the base pin;The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter).One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin.Halogen bulbs emit yellowish light

PLN 68.69

1

Żarówka, lampa kierunkowskazu Hella 556 751 PY21W 21 W 2 szt.

Hella 8GA 006 841-133 Żarówka, lampa kierunkowskazu Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Hella 8GA 006 841-133 Żarówka, lampa kierunkowskazu : There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 16.59

1

Żarówki Hella R5W 5 W 10 szt.

Żarówka R5W 12V 5W Hella 8GA 002 071-121 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka R5W 12V 5W Hella 8GA 002 071-121: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light

PLN 9.91

1

Żarówka Philips 13913CP T2W 2 W 1 szt.

Żarówka T2W 24V 2W Philips 13913CPPoniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka T2W 24V 2W Philips 13913CP:There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs:1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens).2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam.3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics.4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts.5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature.6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K.7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V.Types of auxiliary light bulbs:1. The prefix T indicates a base that is flush with the bulb (e.g., T4W).2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W).3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps.4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W).5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights.In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook.If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points:The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base;"BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs);"BAU" - indicates radial misalignment of the base pin;The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter).One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin.Halogen bulbs emit yellowish light because their temperature range is 3000-4300K. Such light is better

PLN 34.45

2

Philips 5 W 13844CP

Żarówka C5W 24V 5W Philips 13844CP Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka C5W 24V 5W Philips 13844CP: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light because their

PLN 23.66

1

Żarówki Hella R10W 10 W 10 szt.

Żarówka R10W 12V 10W Hella 8GA 002 071-131 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka R10W 12V 10W Hella 8GA 002 071-131: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit yellowish light because

PLN 14.56

1

Żarówka Hella H8 35 W 1 szt.

Żarówka, reflektor doświetlający podczas skrętu Hella 8GH 223 498-141 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka, reflektor doświetlający podczas skrętu Hella 8GH 223 498-141: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is

PLN 83.34

1

Żarówka Hella H9 65 W 1 szt.

Żarówka halogenowa H9 12V 65W Hella 8GH 008 357-001Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka halogenowa H9 12V 65W Hella 8GH 008 357-001:There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs:1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens).2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam.3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics.4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts.5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature.6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K.7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V.Types of auxiliary light bulbs:1. The prefix T indicates a base that is flush with the bulb (e.g., T4W).2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W).3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps.4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W).5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights.In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook.If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points:The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base;"BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs);"BAU" - indicates radial misalignment of the base pin;The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter).One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin.Halogen bulbs emit yellowish light because their temperature range is

PLN 28.25

1

Żarówka Hella 513 003 H4 1 szt.

Żarówka halogenowa H4 12V 100/55W Hella 8GJ 002 525-101 Poniżej znajduje się kilka informacji, które mogą być również interesujące przy wyborze Żarówka halogenowa H4 12V 100/55W Hella 8GJ 002 525-101: There are many varieties of lamps. Bulbs with an "H" at the beginning are represented as halogen bulbs: 1. R2, H1, H3, H4, H7 are flange lamps. They can only be mounted in one position, turning around the optical axis is not possible. This is because of the need for clear beam focusing. R2 is an obsolete type for two-phase lighting systems. H1 and H7 are used in four-phase systems. H1 is used for high beam and dipped beam, and in conjunction with H7 represents the high beam or fog lamps. H7 in its turn is used more frequently for passing beam as it is more modern because of less heat and higher luminous intensity. H3 bulbs are mainly used in fog lights, and H4 bulbs contain spirals for both low and high beam. They are gaining popularity because of their simplicity and low price. But in addition to their advantages, they have a significant disadvantage - low luminous flux (not exceeding 1000 lumens). 2. H8, H9, H11, HB3, HB4, - lamps with plastic sealed socket. H8, H9 and H11 are developed on the basis of H7. They are used for modern high-powered solutions, and for compact headlights among others. H8 is mainly used for fog or dipped beam, H9 exclusively for high beam, and H11 for all headlamps (dipped beam, high beam, and fog lights). This is possible thanks to their high life and proportional characteristics. HB3 lamps are used for high beam and HB4 for low beam. 3. bulbs with the index "D" are exclusively xenon bulbs. Since they are designed to replace the regular Xenon bulbs, they are called "factory Xenon". In which type of optics - lenticular or reflector - such lamps can be used, indicate the suffixes R and S. The black stripe for proper formation of the light beam is a characteristic feature of R-lamps. They also have grooves on the housing to distinguish them. Lamps with the suffix C have certain base grooves and are used in these two types of optics. 4. D1R/D1S lamps have an aluminum box with a high-voltage part placed in it, which reduces the possible interference with car equipment and not only provides safety but also increases it. Plus they have a high lifespan and quick ignition. They are larger and much more expensive than their counterparts. 5.D2R/D2S bulbs were created by Philips. They have become quite popular nowadays. 4300K of these lamps is the maximum declared brightness for the color temperature. 6.D3R/D3S lamps, due to the absence of mercury in the phosphor, have environmentally friendly bulbs. They are also equipped with a high-voltage unit in an aluminum box, just like the D1R/D1S. The color temperature of these bulbs is usually equal to 4300K. 7. D4R/D4S lamps can be found mainly in Toyota and Lexus cars. They are used to replace D2R/D2S. They are recognized as environmentally friendly due to the absence of mercury in their bulbs. For D1-D2 lamps the electric voltage is 85V and for D3-D4 lamps it is 45V. Types of auxiliary light bulbs: 1. The prefix T indicates a base that is flush with the bulb (e.g., T4W). 2.The prefix R indicates a metal base (approx. 15mm) and bulb (approx. 19mm) (e.g. R5W). 3. The prefix P indicates the presence of the same base (about 15mm), but a larger bulb (up to 26.5mm). These types of bulbs are used for reversing or stop lights (e.g. P21W). If the name has an additional index Y, it indicates the orange color that allows their use in colorless lamps. 4.SV (or C) prefix - two-ring (soffit) lights used as license plate or interior illumination (e.g. C5W). 5. The W index indicates the presence of a monolithic bulb base. That is why they are also called socketless. They are often used as instrument panel or parking lights. In the names of the lamps are often specified in addition to the type of lamp and the type of base. Every type of bulb has its own socket, which do not practically overlap (for H4 it is P43t and for H3 - PK22s). To avoid confusion in such a variety of sockets, it is better to use the guidebook. If you want to change halogen lamps for LEDs, you need to know the type of lamp and know a little bit about the socket. There are many types of LED lamps and when choosing them you need to remember some points: The prefix "BA" specified in the name of the base indicates the pin (bayonet) type, and the number indicates the diameter of the base; "BAY" - indicates the offset in height of one of the pins (double-stranded brake light bulbs); "BAU" - indicates radial misalignment of the base pin; The letter after the diameter indicates the number of filaments (s (single) - one filament, d (dual) - two filaments). The soffit lamp bases are SV7 or SV8.5 (the number indicates the diameter). One of the characteristics of lamps is the color temperature, which describes the color of the emitted light and is measured in Kelvin. Halogen bulbs emit

PLN 13.95

1

Marka

Sprzedawca

Cena (EUR)