ProfitSpring | B2B PPC Agency

Advanced MxPro 4 MXM-018 Spare Back-box for Mx-4100

Advanced MxPro 4 MXM-018 Spare Back-box for Mx-4100Advanced metal fabrication provides Industrial electronic enclosures housing all our intelligent fire alarm and indicating equipment. The MxPro 4 control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.The options available can be found on this page and dimensions documented to assist the installer.ApplicationsIdeal for any application where enclosures are required for first fix installations or matching enclosures required for housing third party equipment.Key FeaturesColour matched to the MxPro rangeIdeal for first fix

GBP 273.95

1

Advanced MxPro5 23-PSU250 Power Supply for Commander 12Vdc 2.5A

Advanced MxPro5 23-PSU250 Power Supply for Commander 12Vdc 2.5AA 12V Regulated Power Supply Unit for the Advanced MxPro5 Commander 12VDC 2.5A.The Advanced Commander is a powerful IP based solution for customers requiring protocol translation between their Advanced Fire Control Equipment and a Building Management System BMS.

GBP 321.24

1

Advanced MxPro MXM-532 Document Enclosure

Advanced MxPro MXM-532 Document EnclosureThe MxPro 5range of control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from which can be provided in various depths to meet the customers requirements.Key FeaturesDesigned for IP30 protectionAC terminal block and leadsInternal labellingHinge pins

GBP 329.08

1

Advanced MxPro MXM-531 Document Enclosure

Advanced MxPro MXM-531 Document EnclosureThe MxPro 5range of control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from which can be provided in various depths to meet the customers requirements.Key FeaturesDesigned for IP30 protectionAC terminal block and leadsInternal labellingHinge pins

GBP 291.56

1

Advanced MxPro MXM-546 Battery 45Ah Enclosure

Advanced MxPro MXM-546 Battery 45Ah EnclosureThe MxPro 5range of control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from which can be provided in various depths to meet the customers requirements.Key FeaturesDesigned for IP30 protectionAC terminal block and leadsInternal labellingHinge pins

GBP 208.02

1

Advanced MxPro MXM-518 Utility Enclosure

Advanced MxPro MXM-518 Utility EnclosureThe MxPro 5range of control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from which can be provided in various depths to meet the customers requirements.Key FeaturesThe back-box features includeDesigned for IP30 protectionAC terminal block and leadsInternal labellingHinge pins

GBP 208.02

1

Advanced MxPro MXM-517 Battery 18Ah Utility Enclosure

Advanced MxPro MXM-517 Battery 18Ah Utility EnclosureThe MxPro 5range of control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from which can be provided in various depths to meet the customers requirements.Key FeaturesThe back-box features includeDesigned for IP30 protectionAC terminal block and leadsInternal labellingHinge pins

GBP 187.56

1

Advanced MxPro 45 EN54 5A Power Supply Unit amp Battery Charger MXP-551

Advanced MxPro 45 EN54 5A Power Supply Unit Battery ChargerMXP-551The Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.PSE and charger or PSE only options on the 3.0A and 5.0A versions. A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 330.84

1

Advanced MxPro 45 MXP-551D EN54 5A Power Supply Unit amp Battery Charger with Deep Enclosure

Advanced MxPro 45MXP-551DEN54 5A Power Supply Unit Battery Charger with Deep EnclosureThe Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities. PSE and charger or PSE only options on the 3.0A and 5.0A versions.A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 357.69

1

Advanced MxPro 45 EN54 3A Power Supply Unit amp Battery Charger MXP-550

Advanced MxPro45 EN54 3A Power Supply Unit Battery ChargerMXP-550The Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.PSE and charger or PSE only options on the 3.0A and 5.0A versions. A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 211.20

1

Advanced MxPro 45 MXP-549 EN54 1.5A Power Supply Unit amp Battery Charger

Advanced MxPro 45 MXP-549 EN54 1.5A Power Supply Unit Battery ChargerThe Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.PSE and charger or PSE only options on the 3.0A and 5.0A versions. A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 191.96

1

Advanced MxPro MXM-537-D1 Extended Enclosure - Spare Door

Advanced MxPro MXM-537-D1 Extended Enclosure - Spare DoorAdvanced metal fabrication provides Industrial electronic enclosures housing all our intelligent fire alarm and indicating equipment.The MxPro 5control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from that can be provided in various depths to meet the customers requirements.Applications Ideal for any application where enclosures are required for first fix installations or matching enclosures required for housing third party equipment.Key FeaturesColour matched to the MxPro rangeIdeal for first fix

GBP 179.04

1

Advanced MxPro MXM-537-BB Extended Enclosure - Back Box

Advanced MxPro MXM-537-BB Extended Enclosure - Back BoxAdvanced metal fabrication provides Industrial electronic enclosures housing all our intelligent fire alarm and indicating equipment.The MxPro 5control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from that can be provided in various depths to meet the customers requirements.Applications Ideal for any application where enclosures are required for first fix installations or matching enclosures required for housing third party equipment.Key FeaturesColour matched to the MxPro rangeIdeal for first fix

GBP 264.28

1

Advanced MxPro 45 MXP-550D EN54 3A Power Supply Unit amp Battery Charger with Deep Enclosure

Advanced MxPro 45 MXP-550D EN54 3A Power Supply Unit Battery Charger with Deep EnclosureThe Advanced 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.PSE and charger or PSE only options on the 3.0A and 5.0A versions. A Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages current measurements to compatible control panel modules.ApplicationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice. These power supply units can be used in any fire alarm installation requiring a 24Volt supply for operation.Key FeaturesA range of power supply equipment with power output options to suit most applications.Universal AC input on the 3.0A and 5.0A versionsHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versions

GBP 251.47

1

Advanced MXP-549-12V 1.5A 12V EN54-4 PSE amp Battery Charger Small Enclosure

Advanced MXP-549-12V 1.5A 12V EN54-4 PSE Battery Charger Small EnclosureThe 12V power supply unit is available in the same enclosure as the existing 24V range and is suitable for use with a wide range of control equipment such as communication and paging equipment requiring an EN54-4-approved power supply when used in fire alarm applications.Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high-efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Key FeaturesSuitable for use with a wide range of control equipment12V supply 1.5A onlyHigh efficiency switched mode power suppliesInput Supply AC 230-240V AC 5060Hz fuse T3.15H250Output Voltage DC Max 14.25V DC Min 9.0V DC at minimum battery voltage of 10.6V with mains disconnectedCharging Voltage 13.7 V DC nominal at 20COutput Current 1.15A continuous load 0.35A battery chargeDimensions H x W x D 246 x 263 x 85mmEnvironment Indoor DryFault Output Volt-free change-over contacts rated 1A 30V DCOn Board Indication Mains Fail Charger Fail Battery Open Circuit Battery Low Heartbeat

GBP 191.96

1

Advanced MXM-040 Spare Enclosure cw Door for Mx-4200 Mx-4400

Advanced MXM-040 Spare Enclosure comes with Door for Mx-4200 Mx-4400Spare enclosure comes with door for Mx-4200 Mx-4400.Advanced metal fabrication provides Industrial electronic enclosures housing all our intelligent fire alarm and indicating equipment.The MxPro 4 control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.The options available can be found on the Datasheet and dimensions documented to assist the installer.Applications Ideal for any application where enclosures are required for first fix installations or matching enclosures required for housing third party equipment.Key FeaturesColour matched to the MxPro rangeIdeal for first fix

GBP 182.90

1

Advanced MxPro MXM-537-D2 Extended Enclosure - Spare Panel Door with Mimic Aperture

Advanced MxPro MXM-537-D2 Extended Enclosure - Spare Panel Door with Mimic ApertureAdvanced metal fabrication provides Industrial electronic enclosures housing all our intelligent fire alarm and indicating equipment.The MxPro 5control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from that can be provided in various depths to meet the customers requirements.The options available can be found on this page and dimensions documented to assist the installer.Applications Ideal for any application where enclosures are required for first fix installations or matching enclosures required for housing third party equipment.Key FeaturesColor matched to the MxPro rangeIdeal for first fix

GBP 179.04

1

Advanced MxPro 4 MXS-050 Spare 24v 3A EN54-4 PSU amp Battery Charger Card

Advanced MxPro 4 MXS-050 Spare 24v 3A EN54-4 PSU Battery Charger CardThe 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Applications LimitationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice.Key FeaturesHigh efficiency switched mode power suppliesBoxed or unboxedApproved EN54-4Compact 1.5A 3.0A and 5.0A versionsPower and fault indication3 year warranty

GBP 223.64

1

Advanced MxPro 4 MXS-051 Spare 24v 5A EN54-4 PSU amp Battery Charger Card

Advanced MxPro 4 MXS-051 Spare 24v 5A EN54-4 PSU Battery Charger CardThe 1.5A 3.0A and 5.0A power supply units can be used for any fire alarm system which specifies EN54-4 power supply equipment. Suited for almost any application the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Applications LimitationsFor any fire alarm system which specifies EN54-4 power supplies e.g. BS5839 code of practice.Key FeaturesHigh efficiency switched mode power suppliesBoxed or unboxedApproved EN54-4Compact 1.5A 3.0A and 5.0A versionsPower and fault indication3 year warranty

GBP 384.89

1

Advanced MXP-051 5A EN54-4 PSU amp Charger Utility Enc. - 17Ah Battery Capacity

Advanced MXP-051 5A EN54-4 PSU Charger Utility Enc. - 17Ah Battery CapacityThe Advanced 1.5A 3.0A and 5.0A Power Supply Units can be used for any fire alarm system installation that specifies EN54-4 Power Supply Equipment.Suited for almost any application except for CIE in separate cabinet the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Key FeaturesA range of power supply equipment with power output options to suit most applicationsAll models monitor the battery internal series resistanceWide AC Input range on the 3.0A and 5.0A versionsPSE and Charger or PSE only options on the 3.0A and 5.0A versionsA Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages to compatible control panel modulesA Remote battery sensing option is provided on the 3.0A and 5.0A versions

GBP 349.56

1

Advanced MXP-050-001 3A EN54-4 PSU amp Charger Utility Enc. - 7Ah Battery Capacity

Advanced MXP-050-001 3A EN54-4 PSU Charger Utility Enc. - 7Ah Battery CapacityThe Advanced 1.5A 3.0A and 5.0A Power Supply Units can be used for any fire alarm system installation that specifies EN54-4 Power Supply Equipment.Suited for almost any application except for CIE in separate cabinet the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Key FeaturesA range of power supply equipment with power output options to suit most applicationsAll models monitor the battery internal series resistanceWide AC Input range on the 3.0A and 5.0A versionsPSE and Charger or PSE only options on the 3.0A and 5.0A versionsA Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages to compatible control panel modulesA Remote battery sensing option is provided on the 3.0A and 5.0A versions

GBP 231.37

1

Advanced MXP-050-002 3A EN54-4 PSU amp Charger Utility Enc. - 17Ah Battery Capacity

Advanced MXP-050-002 3A EN54-4 PSU Charger Utility Enc. - 17Ah Battery CapacityThe Advanced 1.5A 3.0A and 5.0A Power Supply Units can be used for any fire alarm system installation that specifies EN54-4 Power Supply Equipment.Suited for almost any application except for CIE in separate cabinet the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Key FeaturesA range of power supply equipment with power output options to suit most applicationsAll models monitor the battery internal series resistanceWide AC Input range on the 3.0A and 5.0A versionsPSE and Charger or PSE only options on the 3.0A and 5.0A versionsA Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages to compatible control panel modulesA Remote battery sensing option is provided on the 3.0A and 5.0A versions

GBP 284.19

1

Advanced MXP-051D 5A EN54-4 PSU amp Charger Utility Enc. - 38Ah Battery Capacity

Advanced MXP-051D 5A EN54-4 PSU Charger Utility Enc. - 38Ah Battery CapacityThe Advanced 1.5A 3.0A and 5.0A Power Supply Units can be used for any fire alarm system installation that specifies EN54-4 Power Supply Equipment.Suited for almost any application except for CIE in separate cabinet the power supply unitbattery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply.The power supply units are available in fully enclosed construction providing power and fault indication or alternatively in caged versions for mounting into existing enclosures of various sizes to suit different battery capacities.Key FeaturesA range of power supply equipment with power output options to suit most applicationsAll models monitor the battery internal series resistanceWide AC Input range on the 3.0A and 5.0A versionsPSE and Charger or PSE only options on the 3.0A and 5.0A versionsA Serial Link option is provided on the 3.0A and 5.0A versions. Allows reporting of PSE status and voltages to compatible control panel modulesA Remote battery sensing option is provided on the 3.0A and 5.0A versions

GBP 377.23

1

Advanced MXP-650 2.5A 24V EN54-4 PSE amp Battery Charger - Large Up To 2x 17Ah Batteries

Advanced MXP-650 2.5A 24V EN54-4 PSE Battery Charger - Large Up To 2x 17Ah BatteriesThe Advanced MXP-650 is a 2.5A power supply unit which can be used for any fire alarm system including AOV systems. They are certified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safe operation.Suited for almost any application the power supply unit and battery charger have been developed using the latest technology to provide a high-efficiency switch-mode power supply.The units include intelligent battery charging technology mains and battery monitoring including two independent volt-free outputs. In addition they also provide deep battery discharge protection in case of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply.These power supply units compliment the MXP-549 1.5A model.Key Features2.5A outputHousing fits 2 x 17Ah batteriesA range of power supply equipment with power output options to suit most applicationsUniversal AC inputIndependently monitored dual outputs of 27.6VdcHigh-efficiency switched mode power suppliesAlternative enclosure sizes to support standby battery backup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-current peak-loadsNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VSelf-resetting battery fuse protection

GBP 263.58

1

Advanced MXP-650D 2.5A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-650D 2.5A 24V EN54-4 PSE Battery Charger - Deep Up to 2x 24Ah or 38Ah BatteriesThe Advanced MXP-650 is a 2.5A power supply unit which can be used for any fire alarm system including AOV systems. They are certified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safe operation.Suited for almost any application the power supply unit and battery charger have been developed using the latest technology to provide a high-efficiency switch-mode power supply.The units include intelligent battery charging technology mains and battery monitoring including two independent volt-free outputs. In addition they also provide deep battery discharge protection in case of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply.These power supply units compliment the MXP-549 1.5A model.Key Features2.5A outputHousing fits 2x 24Ah or 38Ah batteriesA range of power supply equipment with power output options to suit most applicationsUniversal AC inputIndependently monitored dual outputs of 27.6VdcHigh-efficiency switched mode power suppliesAlternative enclosure sizes to support standby battery backup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-current peak-loadsNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VSelf-resetting battery fuse protectionThe image is for illustrative purposes only.

GBP 313.84

1

Brand

Merchant

Price (EUR)