128 results (0,14995 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced Lux Intelligent PLED230 Mains Only PANEL-LED Recessed LED Luminaire

Advanced Lux Intelligent PLED230 Mains Only PANEL-LED Recessed LED Luminaire

Advanced Lux Intelligent PLED230 Mains Only PANEL-LED Recessed LED LuminaireThe Panel-LED is the latest in LED reliability and low energy lighting applications. The Panel-LED is only 12mm thick and drops in to a standard 600mm square tile opening in exposed -T ceilings. They provide an aesthetically pleasing high output uniform light source with a colour temperature of 4500K White. The front face of the Panel LED operates with an even luminance distribution and provides glare free illumination on the working plane.The Panel-LED luminaires are driven by 230Volt 50 Hertz small electronic drivers which are power factor corrected. They can be supplied as standard mains only luminaires and are also available as full emergency units. Dimming controls are also an option. The emergency option fully supports all the features of the Lux Intelligent test system and complies fully with all applicable requirements of EN60598.2.22.OperationThe Panel-LED is supplied with all the standard emergency equipment housed within a galvanised remote metal housing. In the event of a power failure the luminaire continues to operate for a further 3 hours from the Nickel-Metal Hydride batteries. Maintained versions can be used for standard mains lighting and will automatically provide emergency lighting in the event of a loss of normal mains supply.InstallationThe Panel-LED drops in to a standard 600mm square tile opening in exposed T ceilings. The luminaire is also available with dimming control options.Key FeaturesLow energy high light outputLong life LEDs 50000 hoursSimple installation in to suspended ceilingsFully complies with all aspects of EN60598.2.22Fully compatible with Lux Intelligent test system

GBP 425.22
1

Advanced QZ-2 QuickZone 2 Zone Conventional Control Panel

Advanced QZ-2 QuickZone 2 Zone Conventional Control Panel

Advanced QuickZone 2 Zone Conventional Control Panel - QZ-2QuickZone is a 2 or 4 zone Conventional Twin Wire sav-wire control panel with integral power supply space for standby batteries. The panel continues the attributes of quality and reliability that is ways to install maintain and is simple to operate for the end user. Two or four fire zone circuits are provided plus two monitored sounder circuits. Fire and fault VFCO relays Fire Fault switched negative outputs class change and an alert input are also included.The fire zone outputs can be set as Twin Wire by DIL switch selection. The DIL switches are also used to allow Zone interface setting and Access to Level 3 mode. In Level 1 the panel will indicate if there are any faults Supply Fire System or General. As well as this the panel is capable of indicating zones in Fire Fault and disablements. Auxiliary Output and Sounder status will be shown including if the panel is in test mode. Controls enabled in Level 2 include Resound Silence and Reset.Disable and Test modes can also be established at this level as well as muting the internal buzzer and testing the functionality of all the LED indicators. In access Level 3 it is possible to select sounder resound options for zones EN54 requirement select Type A dependency per view and edit dependency functions as well as restore factory settings. The buzzer volume can also be set.Key Features2 or 4 zoneTwin Wire selection by DIL switchApproved to EN54-2 43 year warranty as standardSimple colour coded buttons for controls and programmingIntegral 1 amp switch mode PSUClass change alert inputsFire fault relays2 monitored sounder circuitsTest modeSpace for up to 3.2Ah batteriesKey-switch or code entry for activation of controls

GBP 284.90
1

Advanced QZ-4 QuickZone 4 Zone Conventional Control Panel

Advanced QZ-4 QuickZone 4 Zone Conventional Control Panel

Advanced QuickZone 4 Zone Conventional Control Panel - QZ-4QuickZone is a 2 or 4 zone Conventional Twin Wire sav-wire control panel with integral power supply space for standby batteries. The panel continues the attributes of quality and reliability that is ways to install maintain and is simple to operate for the end user. Two or four fire zone circuits are provided plus two monitored sounder circuits. Fire and fault VFCO relays Fire Fault switched negative outputs class change and an alert input are also included.The fire zone outputs can be set as Twin Wire by DIL switch selection. The DIL switches are also used to allow Zone interface setting and Access to Level 3 mode. In Level 1 the panel will indicate if there are any faults Supply Fire System or General. As well as this the panel is capable of indicating zones in Fire Fault and disablements. Auxiliary Output and Sounder status will be shown including if the panel is in test mode. Controls enabled in Level 2 include Resound Silence and Reset.Disable and Test modes can also be established at this level as well as muting the internal buzzer and testing the functionality of all the LED indicators. In access Level 3 it is possible to select sounder resound options for zones EN54 requirement select Type A dependency per view and edit dependency functions as well as restore factory settings. The buzzer volume can also be set.Key Features2 or 4 zoneTwin Wire selection by DIL switchApproved to EN54-2 43 year warranty as standardSimple colour coded buttons for controls and programmingIntegral 1 amp switch mode PSUClass change alert inputsFire fault relays2 monitored sounder circuitsTest modeSpace for up to 3.2Ah batteriesKey-switch or code entry for activation of controls

GBP 335.18
1

Advanced MxPro MXM-537-D2 Extended Enclosure - Spare Panel Door with Mimic Aperture

Advanced MxPro MXM-537-D2 Extended Enclosure - Spare Panel Door with Mimic Aperture

Advanced MxPro MXM-537-D2 Extended Enclosure - Spare Panel Door with Mimic ApertureAdvanced metal fabrication provides Industrial electronic enclosures housing all our intelligent fire alarm and indicating equipment.The MxPro 5control equipment can be supplied in various sized enclosures to accommodate the internal hardware and battery requirements of the control equipment.There are three standard variations to choose from that can be provided in various depths to meet the customers requirements.The options available can be found on this page and dimensions documented to assist the installer.Applications Ideal for any application where enclosures are required for first fix installations or matching enclosures required for housing third party equipment.Key FeaturesColor matched to the MxPro rangeIdeal for first fix

GBP 179.04
1

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020The Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional key-switch for automaticmanual mode. The Ex-Extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent. The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes.The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-Extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.Key FeaturesRS485 Network PortSmall and CompactOptional Manual Release or Display OnlySurface Mount or Semi Flush OptionUp to 7 Remote Status Indicators per one Ex-3001 Panel3 Year Warranty as standardKey Switch Option for mode select or enable controlsMultiple LanguagesSlide In Labels

GBP 205.06
1

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release Button

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release Button

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release ButtonThe Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional key-switch for automaticmanual mode. The Ex-Extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent. The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes.The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-Extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.FeaturesRS485 Network PortSmall and CompactOptional Manual Release or Display OnlySurface Mount or Semi Flush OptionUp to 7 Remote Status Indicators per one Ex-3001 Panel3 Year Warranty as standardKey Switch Option for mode select or enable controlsMultiple LanguagesSlide In Labels

GBP 242.87
1

Advanced MxPro5 MXM-508Z Glazed Door Kit Double Aperture - Medium Enclosure

Advanced MxPro5 MXM-508Z Glazed Door Kit Double Aperture - Medium Enclosure

Advanced MxPro5 MXM-508Z Glazed Door Kit Double Aperture - Medium EnclosureThe glass panel door provides additional security access for authorised users only. It restricts access to indication and control.The doors are available with and without an aperture for LED indication modules. These modules are not supplied with the kit.They are available for medium and large enclosures and restrict panel access to key holders. The panel is secured by the key-lock and two pins and can be removed if required.Key FeaturesProtection against unauthorised accessIdeal solutions for public areasVandal proofIndependent keylockBespoke robust design

GBP 264.28
1

Advanced MxPro5 MXP-503F Network Card - Standard Fitted

Advanced MxPro5 MXP-503F Network Card - Standard Fitted

Advanced MxPro5 MXP-503F Network Card - Standard FittedThe Ad-NeT network system allows all MxPro 5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro 5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro 5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control Panel

GBP 234.06
1

Advanced MXP-503 Standard Network Card MxPro5

Advanced MXP-503 Standard Network Card MxPro5

Advanced MXP-503 Standard Network Card MxPro5The Ad-NeT network system allows all MxPro5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector-based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control PanelStandard NetworkThe maximum total cable length is 1.5km. The maximum number of network nodes is 32 50 with signal bufferFault Tolerant NetworkThe maximum cable length is 1.5km between each node and the maximum total loop length is 20km. Each network card has in-built diagnostics and is fully monitored for both short and open circuit faults between nodes. The network is capable of withstanding a single fault between nodes without loss of communications to any single panel. The maximum number of network nodes is 200.

GBP 234.06
1

Advanced MXM-538-D3 Glazed Door Kit with Mimic Aperture

Advanced MXM-538-D3 Glazed Door Kit with Mimic Aperture

Advanced MXM-538-D3 Glazed Door Kit with Mimic ApertureThe glass panel door provides additional security access for authorised users only. It restricts access to indication and control.The doors are available with and without an aperture for LED indication modules. These modules are not supplied with the kit.The glass door is secured by the key-lock and two pins and can be removed if required.Please refer to the application note attached which details how to add a glass door option to a standard mx-5000 fire alarm panel.

GBP 347.84
1

Advanced MXM-538-D1 Glazed Door Kit with Zone Aperture - Extended Enclosure

Advanced MXM-538-D1 Glazed Door Kit with Zone Aperture - Extended Enclosure

Advanced MXM-538-D1 Glazed Door Kit with Zone Aperture - Extended EnclosureThe glass panel door provides additional security access for authorised users only. It restricts access to indication and control.The doors are available with and without an aperture for LED indication modules. These modules are not supplied with the kit.The glass door is secured by the key-lock and two pins and can be removed if required.Please refer to the application note attached which details how to add a glass door option to a standard mx-5000 fire alarm panel.

GBP 347.84
1

Advanced Lux Intelligent Pulse IO Interface Unit LXP-110

Advanced Lux Intelligent Pulse IO Interface Unit LXP-110

Advanced Lux Intelligent Pulse IO Interface Unit LXP-110The Lxp-110 module provides control of a central battery unit whilst also been able to monitor fault conditions via a dry contact input.The Pulse light units are a range of addressable modules designed for use with the Lux Intelligent emergency lighting test panel. The modules provide the ability to make a standard emergency luminaire into an addressable luminaire that can be automatically tested and monitored by the Lux Intelligent panel twenty-four hours a day and three hundred and sixty-five days a year.All the modules are loop powered which means even if the local power fails where the luminaires or devices are installed the panel will still be able to monitor their condition. They do not use any power from any batteries installed with the luminaires.Key FeaturesAllows standard emergency luminaire to be used as an addressable luminaireAllows the monitoring of critical parametersEnables the automatic testing of emergency luminairesFully supports all the features of the Lux Intelligent panels

GBP 283.46
1

Advanced LXP-302FLED Pulse Line Unit Fitted into Free Issued LED Luminaire

Advanced LXP-302FLED Pulse Line Unit Fitted into Free Issued LED Luminaire

AdvancedLXP-302FLED Pulse Line Unit Fitted into Free Issued LED LuminaireThe Pulse light units are a range of addressable modules designed for use with the Lux Intelligent emergency lighting test panel. The modules provide the ability to make a standard emergency luminaire into an addressable luminaire that can be automatically tested and monitored by the Lux Intelligent panel twenty-four hours a day and three hundred and sixty-five days a year. All the modules are loop powered which means even if the local power fails where the luminaires or devices are installed the panel will still be able to monitor their condition. They do not use any power from any batteries installed with the luminaires.The Lxp-302 modules provide control and monitoring of the luminaire AC mains power battery condition and lamp status giving actual battery voltage and light level measurements at the control panel. The Lxp-304 module purely monitors the lamp status reporting an actual light level. This device is specifically designed for central battery and static inverter installations. Both the Lxp-302 and Lxp-304 modules can be configured to monitor a luminaire operating as either a maintained or non-maintained luminaire.Key FeaturesAllows standard emergency luminaire to be used as an addressable luminaireAllows the monitoring of critical parametersEnables the automatic testing of emergency luminairesFully supports all the features of the Lux Intelligent panels

GBP 331.12
1

Advanced LXP-302FLEDR Pulse Line Unit Fitted into Free Issued LED Luminaire with Remote Box

Advanced LXP-302FLEDR Pulse Line Unit Fitted into Free Issued LED Luminaire with Remote Box

AdvancedLXP-302FLEDR Pulse Line Unit Fitted into Free Issued LED Luminaire with Remote BoxThe Pulse light units are a range of addressable modules designed for use with the Lux Intelligent emergency lighting test panel. The modules provide the ability to make a standard emergency luminaire into an addressable luminaire that can be automatically tested and monitored by the Lux Intelligent panel twenty-four hours a day and three hundred and sixty-five days a year. All the modules are loop powered which means even if the local power fails where the luminaires or devices are installed the panel will still be able to monitor their condition. They do not use any power from any batteries installed with the luminaires.The Lxp-302 modules provide control and monitoring of the luminaire AC mains power battery condition and lamp status giving actual battery voltage and light level measurements at the control panel. The Lxp-304 module purely monitors the lamp status reporting an actual light level. This device is specifically designed for central battery and static inverter installations. Both the Lxp-302 and Lxp-304 modules can be configured to monitor a luminaire operating as either a maintained or non-maintained luminaire.Key FeaturesAllows standard emergency luminaire to be used as an addressable luminaireAllows the monitoring of critical parametersEnables the automatic testing of emergency luminairesFully supports all the features of the Lux Intelligent panels

GBP 368.66
1

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card Fitted

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card Fitted

Advanced MxPro MXP-035F Peripheral Bus - 4-Way Relay Card FittedThe Programmable 4-Way Relay Card is an optional peripheral unit that provides four individually programmable relay output circuits.Up to 16 cards can be connected to a multi-loop control panel providing a maximum of up to 64 additional local relay outputs.Each output is fully programmable using the powerful dynamic cause-and-effects rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 1A power supply.Applications Limitations Plant control and signalling outputs. Each output can be assigned to an individual output group and is fully programmable for any output function allowed within the MxPro 4 configuration program.Fitting of the Programmable 4-Way Relay Cardin a panel precludes fitting of other panel option cards. Requires installation of the Peripheral Bus Interface Card in the panel when using the MxPro 4 series.Key FeaturesEach output is 230V 5A ratedEach output is individually programmable with any of the available DynamiX cause-and-effect rulesUp to 16 cards can be connected providing a total of 64 additional outputsEach output may be individually programmedAn input is provided to monitor the fault output from a power supply.4-way programmable relay cardEasily configured via PC-NET-0033-year warranty as standard

GBP 279.74
1

Advanced MXM-507 MxPro 5 Glazed Door Kit Large Enclosure

Advanced MXM-507 MxPro 5 Glazed Door Kit Large Enclosure

Advanced MXM-507 MxPro 5 Glazed Door Kit Large EnclosureThe MXM-507 and MXM-508 are dedicated perspex doors to help protect the fire panel controls from any unauthorised access. The lexanperspex doors are available for medium and large enclosures and restrict panel access to key holders.Applications LimitationsSingle loop controls panels will need to be housed in medium enclosures MxPro 5 1 loop M to accommodate lexan doors. This item is provided retro-fit only.Key FeaturesProtection against unauthorised accessIdeal solutions for public areasVandal proofIndependent keylockBespoke robust designProduct CodesDescriptionMXM-507Glazed Door Kit - Large EnclosureMXM-507ZGlazed Door Kit Double Aperture - Large EnclosureMXS-505Spare Key - MX-5000 Glazed Door

GBP 308.60
1

Advanced Mxp-003 Standard Network Card MXPro 4

Advanced Mxp-003 Standard Network Card MXPro 4

Advanced Mxp-003 Standard Network Card MXPro 4The Network cards are compatible with all Mx Ax series control panels. The Remote Terminals RCT RDT Mxp-010 BMS Graphics interface and other network peripherals such as Advanced Mimic Units AMU all have integral network cards built-in. Only use fault tolerant Peripherals and Remote Terminals on a fault tolerant network. The Standard Network Card is supported on all panels from software version 015 onwards. The Fault Tolerant Network Card is supported on all panels from software version 018 onwards.Key FeaturesTrue Peer to PeerLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control Panel

GBP 324.35
1

Advanced Programmable Relay - MXP-035

Advanced Programmable Relay - MXP-035

Advanced Programmable Relay - MXP-035The programmable 4-Way Relay Card is an optional peripheral unit that provides four individually programmable relay output circuits. Up to 16 Cards can be connected to a multi-loop control panel providing a maximum of up to 64 additional local relay outputs. Each output is fully programmable using the powerful DynamiX cause and effects rules and all outputs are synchronised. The unit is available as either a printed circuit card only or as a boxed version with integral 1A power supply.Key Features4 Way Programmable Relay Card16 Cards Max per Control panel totalling 64 230V 5 Amp rated outputsEasily Configured via PC-NET-0033 Year Warranty as standard

GBP 279.74
1

Advanced QZXL-HSZEC QuickZone XL 4 Zone Expander Card High Spec

Advanced QZXL-HSZEC QuickZone XL 4 Zone Expander Card High Spec

Advanced QZXL-HSZEC QuickZone XL 4 Zone Expander Card High SpecQuickZone XL is up to 12 zone Conventional Twin Wire sav-wire control panel with integral power supply space for standby batteries.The panel continues the attributes of quality and reliability that is easy to install maintain and is simple to operate for the end user. Up to 12 fire zone circuits are provided plus two monitored sounder circuits.Fire and fault VFCO relays Fire Fault switched negative outputs class change and an alert input are also included. The fire zone outputs can be set as Twin Wire by DIL switch selection. The DIL switches are also used to allow Zone interface setting and Access to Level 3 mode.Dependency modes A B C available. In Level 1 the panel will indicate if there are any faults Supply Fire System General repeater.As well as this the panel is capable of indicating zones in Fire Fault and disablements and delay status. Auxiliary Output and Sounder status will be shown including if the panel is in test mode. Controls enabled in Level 2 include Resound Silence and Reset.Disable and Test modes can also be established at this level as well as muting the internal buzzer and testing the functionality of all the LED indicators. In access Level 3 it is possible to select sounder resound options for zones EN54 requirement select Type A dependency per view and edit dependency functions as well as restore factory settings. The buzzer volume can also be set and the event log viewed. Panel wide settings including access codes and delays. Two Additional monitored sounder outputs programmable switched negative outputs and one programmable relay available with high specification expansion card.Key FeaturesIntegral detector removal monitoringTwo monitored sounder circuits fitted as standardSpace for up to 2 x 7.0Ah batteriesKey-switch or code entry for activation of controlsCan support up to 8 fully functional repeater panels2 Additional sounder circuits with high spec expansion cardModular expansion zone cards availableAlarm load of 2.4A shared across all sounder outputsTest Mode with or without soundersProgrammable relays and outputsClass Change Alert programmable inputsIntegral 3 Amp switch mode PSUThree-year warranty as standardFully approved to EN54-2 44 to 12 Zones4 x conventional or Twin Wire zone circuits2 x switched ve outputs1 x Aux relay output2 x monitored sounder circuits

GBP 220.18
1

Advanced ESLO EasySafe Low Voltage Downlighter with Open Area Lens

Advanced ESLO EasySafe Low Voltage Downlighter with Open Area Lens

Advanced ESLO EasySafe Low Voltage Downlighter with Open Area LensEasySafe products are designed to work with LuxIntelligent Advanceds emergency light testing system. Powered directly from the LuxIntelligent panel Advanceds EasySafe devices require no local power supply and are compatible with any existing LuxIntelligent luminaires and exit signs enabling the easy installation of devices onto existing wiring to form one intelligent emergency lighting system.The low-voltage lights offer quick and easy fitting and service with a simple twist and click installation onto a first-fix base. EasySafe has been designed to offer true scalability with just one LuxIntelligent panel supporting up to 400 EasySafe devices alongside an additional 1592 locally-powered devices.The EasySafe downlighter is supplied with integral non-maintained emergency lighting addressable control gear. The self-contained unit offers 3-hour emergency lighting duration from integral nickel-metal hydride batteries. The EasySafe downlighter incorporates a high-brightness green LED into the white polycarbonate bezel to provide battery charge and luminaire healthy indication. The luminaires will automatically provide emergency lighting in the event of a loss of local mains supply monitored by the LuxIntelligent panel at source. The benefits of modern LEDs are well documented.Key FeaturesFirst Fix BaseNon-MaintainedAddressableOpen Area LensFully compatible with LuxIntelligent test systemReliable LED technologyPowered from the LuxIntelligent data loopExcellent spacing valuesDiscrete surface-mounted LED luminaireRobust constructionSurface Mounted

GBP 295.60
1

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door amp Label Retro-Fit

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door amp Label Retro-Fit

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door Label Retro-FitThe Zonal LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 4 series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in fire.The units fully support dynamic zoning on networked or larger stand-alone systems and can be used to provide individual zonal LED indication at one location. 20 zone units are available which are fitted to the front display plate on the MxPro 4 series control panel. The Mxp-013-050F Mxp-013-100F and Mxp-013-200F incorporate 50 100 or 200 LED indicators respectively and are compatible with all MxPro 4 series multiloop panels.FeaturesThe cards are capable of simultaneously displaying all zones in a fire condition and incorporate a unique power saving feature to minimise the power drawn from the control panel in the event of a major fire. Several other options are also available within the MxPro 4 range for applications where indication of fire signals from zones in addition to the panels graphical display is required. These options include Advanced Mimic Units graphical systems and printers.Key FeaturesUp to 200 zones available3 year warranty as standardFactory fitted or retro fitDynamic zoningCost effective against ancillary hardware

GBP 355.63
1

Advanced ESLC EasySafe Low Voltage Downlighter with Corridor Lens

Advanced ESLC EasySafe Low Voltage Downlighter with Corridor Lens

Advanced ESLC EasySafe Low Voltage Downlighter with Corridor LensEasySafe products are designed to work with LuxIntelligent Advanceds emergency light testing system. Powered directly from the LuxIntelligent panel Advanceds EasySafe devices require no local power supply and are compatible with any existing LuxIntelligent luminaires and exit signs enabling the easy installation of devices onto existing wiring to form one intelligent emergency lighting system.The low-voltage lights offer quick and easy fitting and service with a simple twist and click installation onto a first-fix base. EasySafe has been designed to offer true scalability with just one LuxIntelligent panel supporting up to 400 EasySafe devices alongside an additional 1592 locally-powered devices.The EasySafe downlighter is supplied with integral non-maintained emergency lighting addressable control gear. The self-contained unit offers 3-hour emergency lighting duration from integral nickel-metal hydride batteries. The EasySafe downlighter incorporates a high-brightness green LED into the white polycarbonate bezel to provide battery charge and luminaire healthy indication. The luminaires will automatically provide emergency lighting in the event of a loss of local mains supply monitored by the LuxIntelligent panel at source. The benefits of modern LEDs are well documented.Key FeaturesFirst Fix BaseNon-MaintainedAddressableCorridor LensFully compatible with LuxIntelligent test systemReliable LED technologyPowered from the LuxIntelligent data loopExcellent spacing valuesDiscrete surface-mounted LED luminaireRobust constructionSurface Mounted

GBP 295.60
1

Advanced MxPro4amp5 PC-NET-003-USB Series Configuration Software cw USB Lead

Advanced MxPro4amp5 PC-NET-003-USB Series Configuration Software cw USB Lead

Advanced MxPro45 PC-NET-003-USB Series Configuration Software cw USB LeadPC-NET-Programming Suiteallows the configuration of the MxPro4 and MxPro5 series fire panels and is equipped with the latest programming options expected from a modern fire control panel.In addition to the standard configuration options the package allows sophisticated cause-and-effect variable sensitivities and time critical settings to be defined.The software also has a Virtual Panel display supports remote diagnostics and allows flexible connection either directly or via modem for all of the functions.Key FeaturesAllows full configuration of the MxPro4 and 5 panels and networkUser-friendly Windows based softwareVirtual panel displaySupports remote diagnosticsAssistants menu to check your design and configurationPanel branding via electronic logoService Tool for predicting false alarms and providingcustomised end user reportsPlease Note The PC-NET-003-USB comes complete with USB Upload Download Lead if you require a Serial configuration lead please use product code PC-NET-003

GBP 181.16
1