ProfitSpring | B2B PPC Agency

Aico EI660i Multi-Sensor Fire Alarm With 10 Year Lithium Cells With AudioLINK

Aico EI660i Multi-Sensor Fire Alarm With 10 Year LithiumCells With AudioLINKThe Ei660i is a battery-powered Multi-Sensor Fire Alarmcontaining two proven reliable sensors Optical and Heat. The intelligentalarm software actively monitors both sensors allowing them to work togetherand provide total fire coverage.The Ei660i Multi Sensor Fire Alarm uses Optical and Heatsensors to detect all fire types with an increased resistance to false alarms.Its ability to respond quickly to both fast flaming and smouldering firessimplifies alarm choice for the designated roomsareas including the hallwaylanding living room dining room bedroom and loft spaces.Key FeaturesPowered by a sealed 10-year lithium batteryBuilt-in AudioLINK technologyBuilt-in dust compensation technologyTwist on base with an anti-tamper locking optionGrade F1 and kitemarked to BS EN146042005 and BS5446-22003Easy to use large test button

GBP 61.51

1

Aico EI660iRF Multi-Sensor RF Fire Alarm With 10 Year Lithium Cells with AudioLINK amp RadioLINK

Aico EI660iRF Multi-Sensor RF Fire Alarm With 10 YearLithium Cells with AudioLINK RadioLINKThe Ei660iRF is a battery-powered Multi-Sensor Fire Alarmwhich can wirelessly interconnect with any other RadioLINK and SmartLINKproducts.The Multi-Sensor Fire Alarm contains two proven reliablesensors Optical and Heat. The intelligent alarm software actively monitorsboth sensors allowing them to work together and provide total fire coverage.Key FeaturesPowered by a sealed 10-year lithium batteryBuilt-in RadioLINK and AudioLINK technologyBuilt-in dust compensation technologyTwist on base with an anti-tamper locking optionGrade F1 and compliant with Scottish legislationKitemarked to BS EN 146042005 and BS 5446-22003Easy to use large test button

GBP 133.55

1

Aico Vibrating Pad for use with Alarms Ei174

Aico Vibrating Pad for use with Alarms Ei174The Ei174 is an additional Vibration Pillow Pad designed for use with Ei Alarms for the hearing impaired. It comes with a 5m of cable and plugs into an alarm kit using the socket plug supplied. It provides additional warning where more than one vibrating pillow pad is needed.Key FeaturesActivates on receipt of an alarm signalPlugs directly into the alarms strobe unit5 year guarantee

GBP 34.45

1

Aico Ei171RF RadioLINK Flashing Strobe with Rechargeable Back-up

AicoEi171RFRadioLINK Flashing Strobe with Rechargeable Back-upThe Ei171RF is a RadioLINK alarm accessory that is designed to give warning to the deaf and hard of hearing if their alarm system has activated. It consists of a mains powered strobe light with a rechargeable battery back-up. This strobe has been designed specifically for daytime rooms as a visual indicator with a specially designed lens for wide-angle light output.For protection in a bedroom we recommend the Ei170RF alarm kit as this combines a strobe light and a vibrating pillow pad for extra warning.This Strobe Light is compatible with the 3000 Multi-Sensor Fire Alarm Ei2110e 160e Series alarms and 140RC Series smoke and heat alarms along with any interconnected Carbon Monoxide alarms. This kit links into the alarm system using RadioLINK wireless interconnection technology making it easier to add into a system and causing less disruption to the occupants on installation.As with other RadioLINK products the Ei17iRF Strobe for the Deaf and Hard of Hearing will need to be linked into the alarm system or House Coded.Key FeaturesFor use with 3000 2110e 160e and 140RC Series smoke and heat alarms when used with a RadioLINK base RadioLINK module or a SmartLINK module and RadioLINK Carbon Monoxide CO alarms it can also be used with all other RadioLINK devicesancillariesEliminates the need for any cabling between the Ei170 RF and the smoke heat andor CO alarms used in the systemRequires 230V AC 50Hz mains power supplyBuilt-in high-intensity Xenon strobe flash rate 0.8Hz with a wide light output angleBuilt-in long life sealed lead acid rechargeable batteryMains transformer is mounted in separate and hard-wired to the strobe unit with 4m of low voltage cable. Supplied with 2m of mains cable and pre-wired 13 amp plug with a 3 amp fuseIntegrated Test button on the front of the unit. Pressing this checks strobe and control circuitry and also send out a RadioLINK alarm signal to other units in the systemUp to 12 RadioLINK units can be used in one system. For larger systems contact our Technical Department for guidanceAn optional additional strobe Ei178 is available for providing warning in additional rooms The Ei178 is supplied with 10m of pre-wired cable and plug for connection to one of the auxiliary socketsThe product is CE marked to indicate conformance to directives EMC 89336EEC tested to EN50130-4 Low Voltage 7323EEC tested to EN60065 RTTE 19995EC tested to EN300220-2V2.1.1Designed for wall or surface mountingDimensions Control box 195mm x 125mm x 75mm. Mains adapter 60mm x 50mm x 90mmWeight Control box 770g. Mains adapter 600gAmbient Temperature Range 4C to 40C. Humidity Range 0 to 90 relative humidity5-year guarantee

GBP 245.27

1

Aico SAB300C 230V Xenon Strobe with Clear Lens

Aico SAB300C 230V Xenon Strobe with Clear LensThe SAB300C is a mains powered Flashing Xenon Strobe. The Strobe connects into the Alarm system via a relay base or module such as the Ei428 or the Ei128RBU. If the Alarms trigger the relay will send out a signal that triggers the Strobe to flash at a 0.9Hz rate. The Strobe is an alarm accessory that is designed to give a visual warning if a properties alarm system has been triggered.The strobe is weather protected to IP65 and can be used in all locations indoors and outdoors. There is a central grommet cable entry and detachable mounting base with 4 x 8mm side knockout pints.Key FeaturesMains powered Strobe Clear LightActivated by relay module0.9Hz flash rate3 Watt Xenon tubeFor indoor or outdoor useWeather protected to IP65230v AC powered 15mA power consumptionCE markedCan be used with the mains range of smoke and heat alarms via an Ei128R eI128RBU Ei158R or Ei428 relay to provide a visual warning of an alarm conditionCentral grommet cable entry and detachable mounting base with 4 x 8mm side knockout points2 x 4.5mm screw fixing slots 50-60mm centresMaximum cable size 1.5mm recess mountingTemperature range -20C to 40CFixing methods BESA conduit box single gang wiring box or directDimensions Base diameter 85mm x height 81mm

GBP 52.20

1

Aico SAB300R 230V Xenon Strobe with Red Lens

Aico SAB300R 230V Xenon Strobe with Red LensThe SAB300R is a mains powered Flashing Xenon Strobe. The Strobe connects into the Alarm system via a relay base or module such as the Ei428 or the Ei128RBU. If the Alarms trigger the relay will send out a signal that triggers the Strobe to flash at a 0.9Hz rate. The Strobe is an alarm accessory that is designed to give a visual warning if a properties alarm system has been triggered.The strobe is weather protected to IP65 and can be used in all locations indoors and outdoors. There is a central grommet cable entry and detachable mounting base with 4 x 8mm side knockout pints.Key FeaturesMains powered Strobe Red LightActivated by relay module0.9Hz flash rate3 Watt Xenon tubeFor indoor or outdoor useWeather protected to IP65230v AC powered 15mA power consumptionCE markedCan be used with the mains range of smoke and heat alarms via an Ei128R eI128RBU Ei158R or Ei428 relay to provide a visual warning of an alarm conditionCentral grommet cable entry and detachable mounting base with 4 x 8mm side knockout points2 x 4.5mm screw fixing slots 50-60mm centresMaximum cable size 1.5mm recess mountingTemperature range -20C to 40CFixing methods BESA conduit box single gang wiring box or directDimensions Base diameter 85mm x height 81mm

GBP 52.20

1

Aico RadioLINK Alarm for Deaf 230V with Strobe Vibrating Pad Ei170RF

Aico RadioLINK Alarm for Deaf 230V with Strobe Vibrating Pad Ei170RFTheEi170RF is a mains powered with rechargeable battery back up alarm kitfor the deaf and hard of hearing. Thekit contains aXenon strobe lightthat provide and plug in vibrating pillow pad that will activate when the interconnected alarms are triggered to alert theuser tothe danger.TheEi170RF kit is compatible with the3000Multi-Sensor Fire Alarm Ei2110e160e Seriesalarms and 140RC Series smoke and heat alarms along with any interconnected Carbon Monoxide alarms. This kit links into the alarm system usingRadioLINK wireless interconnection technology making it easier to add into a system and causing less disruption to the occupants on installation.An integral Test button is also present on the front of the unit allowing an easy means of testing the strobe vibration pad and the RadioLINK enabled alarms in the system.As with other RadioLINK products the Ei170 Alarm Kit for the Deaf and Hard of Hearing will need to belinked into the alarm system or House Coded. View ourstep by step guide to House Coding here.Technical Specification A strobe and vibrating pillow pad kit designed to give warning of fire to deaf and hard of hearing occupants. For use with30002110e160eand 140RC Series smoke and heat alarms when used with aRadioLINK baseRadioLINK moduleor theSmartLINKmoduleRadioLINK Carbon MonoxideCO alarms. It can also be used with all other RadioLINK devicesancillaries including the 600 Series RadioLINK smoke and heat alarms.Eliminates the need for any cabling between the Ei170 RF and the smoke heat andor CO alarms used in the system.Requires 230V AC 50Hz mains power supply.The unit has a built-in high-intensity Xenon strobe flash rate 0.8Hz with a wide light output angle.Built-in long life sealed lead acid rechargeable battery to provide back-up power in the event of mains failure. Standby capacity 7 days followed by 15 minutes alarm lifespan 5 years in normal use. The battery is connected by plugging it into the socket in the bottom of the battery box.Comprehensive indicating lights on front of the unitPower Constant green to indicate mains is present flashes amber every 4 seconds with mains absent.Alarm red Flashes every second when the unit has been triggered.Fault amber Flashes every 4 seconds if a fault is detected with panelvibration pad. Flashes every 4 seconds if rechargeable back-up battery is depleted or faulty.RF status blue Illuminates when RF signal is being sent flashes in House Code mode to indicate the number of units learned. Flashes every 40 seconds if RadioLINK smoke alarms have a low battery.Mains transformer is mounted in separate and hard-wired to the strobe unit with 4m of low voltage cable. Supplied with 2m of mains cable and pre-wired 13 amp plug with a 3 amp fuse.Integrated Test button on the front of the unit. Pressing this checks strobe and control circuitry and also send out a RadioLINK alarm signal to other units in the system.The vibrating pillow pad is suitable for mounting under mattresses or pillows and produces strong pulsed vibrations suitable for waking sleepers. Supplied with locking plug and 5m of pre-wired cable.Connecting sockets on rear of unit as followsVibration Pad socket Locking socket JST type VHR-2N. Is pulsed when unit is in alarm.Auxiliary sockets Two auxiliary sockets are available on the rear of the unit to allow connection of additional strobes etc. Locking sockets JST type VHR-2N. Each provides 12V200mA when unit is in alarm. Can be used for any of the following Auxiliary strobe Ei178 auxiliary vibration pad Ei174 or for triggering a radio pager.A clock input socket is also available. This is for use will alarm clocks that have a 3.5mm mono jack output and saves the need for multiple vibration pads. An input of 5-12V AC or DC mains isolated will turn on the vibration pad constant vibration pattern but will not activate the strobe or auxiliary sockets.Radio frequency 868MHz band in accordance with RTTE Directive 19995EC this band has been designed for use with security products and only allows a 1 duty cycle so continuous transmission and interference from external sources is extremely remote and would be illegal. Complies with EN300220-2V2.1.1.RF Range The type of building will be the major limiting factor e.g. the number and type of wallsceilings that the radio signal has to pass through. As a guide 30m should be the maximum distance between any of the RadioLINK units in the system.Up to 12 RadioLINK units can be used in one system. For larger systems contact our Technical Department for guidance.

GBP 279.71

1

Aico EI650iRF RadioLINK Optical Smoke Alarm - 10 Year Lithium Battery Powered - With AudioLink

Aico EI650iRF RadioLINK Optical Smoke Alarm - 10 Year Lithium Battery Powered - With AudioLink The Ei650iRF is a battery-powered Optical Smoke Alarm. It is able to wirelessly interconnect with any other RadioLINK RadioLINK and SmartLINK products. Contains an Optical Smoke ChamberThe Ei650iRF RadioLINK Optical Smoke Alarm is best for detecting slow smouldering fires commonly produced by electrical fires or sofas and is less likely to react to cooking smells if fitted in the hallway next to the kitchen.Battery and LifespanThis battery powered alarm contains sealed in tamper-proof lithium battery that will last for the full 10-year life of the alarm. The alarm is not powered until it is twisted on the mounting base thus avoiding battery power consumption during storage and prior to installation.Built-in RadioLINK Wireless Interconnection TechnologyRadioLINK wireless interconnection technology is built-in to this alarm. RadioLINK uses Radio Frequency signals to link alarms together with added functionality. All RadioLINK alarms and devices should be House Coded together upon install.Key FeaturesOptical sensor with dust compensation technologyBuilt-in AudioLINKUses built-in RadioLINK technology to interconnect and for data extractionConnects wirelessly with all other Aico wireless interconnection productsBattery powered with a sealed-in lithium batteryEasy to fit twist on base and multi-fixings with an anti-tamper locking option10-year lifeGrade F1 and compliant with Scottish legislationKitemarked to BS EN 146042005

GBP 94.61

1

Aico EASI-FITBASE Easi-Fit Base For Use With 140RC and 3000 Series Alarms

Aico EASI-FITBASE Easi-Fit Base For Use With 140RC and 3000 Series AlarmsAicos easi-fit base has been proven to give quick reliable installation and comes with all our mains powered fire alarms such the 3000 Series and 140e Series. The first easi-fit bases were launched in 1999 and have become a firm favourite with installers ever since.All Aico mains powered smoke and heat alarms along with all future product developments are compatible with easi-fit bases meaning you wont need to wire in a new base when you come to re-new or upgrade the alarms.Key FeaturesA clip on wiring coverTamper-proof locking latchRemovable trunking pull-out 25mmBuilt-in terminal blockClearly labelled wiring terminals

GBP 5.04

1

Aico EI1000G SmartLINK Gateway - Mains with Lithium Back-up

Aico EI1000G SmartLINK Gateway - Mains with Lithium Back-upThe SmartLINK Gateway is designed for use with the Aico RF devices. It provides a mechanism to transfer information from the RF network to a portal over the GSM network.It is mains powered with a rechargeable battery backup that can provide up to 72hrs of power supply in case of mains failure.Connected devices events are processed by the Gateway as they occur and cover events such asFire AlarmCO level detected High Medium LowButton TestMains Absent FaultHead OKHead RemovedEnd of lifeTo ensure the safety of the data it is encrypted in both directions during transmission using AES128 encryption.In addition for ease of installation the SmartLINK App available on Android iOS provides a step-by-step guide for the installation of the Gateway and the Aico RF devices.All data sent is accessible from a web portal where alerts can be set up to be delivered by email or SMS. Reports can also be run from the web portal to facilitate the management of the Alarms fitted.The data on the portal is securely stored and is only available to the associated client.Key FeaturesEnables remote management of RF AlarmsReceives RF specific data from RF devicesTransmits data over GSM networkNot GSM provider dependentBidirectional data encryptionUnique House Coding featureEasy setup and configurationCompatible with SmartLINK RadioLINKProvides specific data from radio frequency devicesHeart beat every 12 hours which gets sent to the portalTo connect to your smart device and portal you simply scan QR codes on alarm and moduleEasy installation and configurationTransmits data over GSM networkUnique house coding featureData upload 2G GSM network roaming sim card supplied no subscription necessaryFrequency 868MHz band 1 duty cyclePower usage 40mAVoltage 230VBattery back-up Rechargeable batteryProtocol Proprietary RF Protocol using multi-path multi-repeater mesh architectureRF Range 100 metres in free air depending on obstructionsNumber of devices Up to 12 RF devicesIndicator LEDs 3 colour LED blue green and redData requirements Monitoring via Ei1000G gateway download via EiUSB1Operating temperature -10C to 40CHumidity range 15 to 95 relative humidityMaterial PlasticHeight 150mmWidth 145mmDepth 55mm

GBP 350.89

1

Aico MCP401RC 230v Manual Call Point with Rechargeable Back-up

Aico MCP401RC 230v Manual Call Point with Rechargeable Back-upThe MCP401RC Manual Call Point is an emergency device that when activated triggers all the alarms on the connected system. This Call Point is mains powered and can be hard wired interconnected anywhere into the alarm system.The front plate is made from a non-breaking plastic that means if the call point is used you can simply reset the plate rather than having to replace it.When the Manual Call Point is activated it will trigger all alarms causing them to sound.When the unit is reset using the key provided it will automatically cancel the interconnect signal and the alarms will stop sounding.Key FeaturesA unique Manual Call Point that mimics the feel of breaking glass whilst offering the benefits of a re-settable operating element230V AC mains powered with tamper proof rechargeable Lithium cells designed to last 10 years the life of the unit whilst providing up to 2 months operation in the event of mains failureSuitable for use with 2110e 160e and 140RC Series smoke heat and CO alarms up to a maximum of 20 including the MCP401RCEasily installed via a 3-core connection Live Neutral and interconnect the same as the smoke heat and CO alarms using 0.75mm or 1.00mm cableWhen the front plate is pressed a visible warning flag will appear to indicate it has been activated.Simple key to reset the unit no broken glassSupplied with 35mm deep surface mounting box rest key and all screws and fixingsDimensions 85 x 85 x 60mmWeight inclusive of packaging 230g5 year guarantee

GBP 45.18

1

Aico EI144E Heat Alarm - 230V with Alkaline Battery Back-up - Easi-fit Base

Aico EI144E Heat Alarm - 230V with Alkaline Battery Back-up - Easi-fit BaseThe Ei144e Heat Alarm is a mains powered unit and can be interlinked with other Aico alarms through either a hard wired or wireless interconnection.The alarm is supplied with an easi-fit base to make it as quick and simple to install.Alarm SitingDifferent alarms sensors work best at detecting different types of fire and so should be sited in appropriate rooms throughout a property. Heat alarms are best at detecting large fast flaming fires which are commonly caused by kitchen fires. The Ei144e is suitable for Kitchen and GarageThe Heat alarm will react to the heat in the Kitchen or Garage rather than smoke making it more resistant to fumes such as burnt toast and therefore less likely to false alarm.RadioLINK TechnologyAs with the rest of the 140e Series alarms the Ei144e Heat alarm can be interconnected with other alarms and accessories through hard wire connection or for less mess and disruption by RadioLINK wireless interconnection.Key FeaturesHeat sensor responds to heat build-up from large flaming fires triggers at 58CMains powered with 9V Alkaline battery back-upEasi-fit base for quick and simple installationKitemarked to BS 5446-220035 year guarantee

GBP 51.42

1

Aico EI3016EF Eco-Fit Pack Optical Smoke Alarm - 230V with 10 Year Rechargeable Lithium Battery

Aico EI3016EF Eco-Fit Pack Optical Smoke Alarm - 230V with 10 Year Rechargeable Lithium BatteryThe Ei3016EF is an eco-fit pack containing ten Ei3016 mains powered Optical Smoke Alarms with 10 Year Rechargeable Lithium Back-up.eco-fit packs are more environmentally friendly through the use of minimal packaging no easi-fit bases screw packs or dust covers. All packaging is fully recyclable.Key FeaturesEco-fit pack containing ten Ei3016 Optical Smoke AlarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseMains powered with rechargeable lithium Back-up

GBP 728.81

1

Aico RadioLINK Relay Module with 5A Relay amp Rechargeable Battery Back-up Ei428

Aico RadioLINK Relay Module with 5A Relay Rechargeable Battery Back-up Ei428The Ei428 is a mains powered relay module that triggers external devices such as a strobe light or telecare deviceif the alarmsin the propertyactivate.For use with 140RC when using anEi168Rc RadioLINK base160ewhen using andEi100MRF RadioLINK module Ei3000 series when using anEI3000MRF SmartLINK moduleor any RadioLINK enabled CO alarms.The module has additional trunking knock outsto make as easy to install as possibleand is designed to fit underneath the space of easi-fit or RadioLINK base. However a cover Ei128COV is available if needed and containsa set of volt free contacts as standard.The replay module can beconfigured to give a 230V output or a 24V output using an external 24V supplyOperation of Ei428 RadioLINK Relay ModuleOn receiving a RadioLINK signal from one of the alarms in the system the relay contacts will be operated causing a signal to be sent to the system to which it is connectedThe indicator on the cover will show a constant green light when the mains power is connected.Technical SpecificationA relay module with cover to allow flexibility in siting.For use with 140RC when using anEi168Rc RadioLINK base160ewhen using andEi100MRF RadioLINK module Ei3000 series when using anEI3000MRF SmartLINK moduleor any RadioLINK enabled CO alarms.Eliminates the need for any cabling between the Ei428 and the smoke heat and CO alarms used in the system.Requires 230V AC Mains Power Supply Green LED to indicate mains power is present.Features built-in tamper proof Rechargeable Vanadium Pentoxide lithium standby cells capable of lasting at least 10 years and powering the module initially for at least 2 months in the event of mains power failure. The cell manufacturer endorses a minimum 10-year life expectation for the rechargeable cells which are activated by operating the battery switch inside the module.The product is CE marked to indicate conformance to BS EN 600651998 Electrical Safety EN300220-1 V1.3.1 2000-09 RF Performance EN301489 V1.4.1 2002 08 EMC and has been 3rd party tested for electrical safety in accordance with Annex K of BS 5446 Pt.12000.Radio frequency 868 MHz Band in accordance with RTTE Directive 19995EC this band has been designated for use with security products and only allows a 1 duty cycle so continuous transmission and interference form external sources is extremely remote and would be illegal.Range The type of building will be the major limiting factor e.g. the number and type of wallsceilings that the radio signal has to pass through. As a guide 30m should be the maximum distance between any of the RadioLINK units in the system.Up to 20 RadioLINK units can be used in one system. Range will be the limiting factor.Low back-up warning signal LED indicator flashes RED every 10 seconds to indicate that the lithium cells are depleted.Units are in Factory Code mode when received they will all communicate with each other. They must be House Coded to eliminate the risk of adjacent properties communicating with each other. After House Coding they will only communicate with other RadioLINK units coded at the same time.House Code Operate the House Code switch on all RadioLINK units in the system see the instructions supplied with other RadioLINK units being used. The green LED on the cover of the Ei428 will change to red and flash slowly this indicates that it will receive the unique serial numbers being sent by all other RadioLINK units in House Code. The number of flashes of the LED indicates the number of units in the system The Ei428 will return to normal standby mode automatically after 15 minutes. Pressing the House Code switch again will return it to normal standby immediately.Volt free contacts Normally Open or Normally Closed rated up to 240V AC 5 Amps making it suitable for use with a wide range of AC or DC voltages. The relay contacts operate on mains power or on back-up cells in the event of mains failure.A RadioLINK Manual Call Point Ei407 and remote control switches Ei450 Ei412 and Ei411H are also available for use in the system. See separate specification sheets for further information.Features 1 x 25mm trunking for for surface wiring and centre knockout for recess wiring.Ambient Temperature Range 4C to 40C. Humidity Range 0 to 90 relative humidity.Dimensions 140mm diameter x 27mm depth weight inclusive of packaging 220g.5 year guarantee.Manufactured in Ireland.Key FeaturesDesigned for use with all RadioLINK Professional alarms and accessoriesRechargeable Lithium battery back-upVolt-free contacts as supplied for multiple usesCan be configured to switch a 230V or 24V outputTrunking knock-outs for easy and neat wiringContinuous or Pulse operation5 Year Guarantee

GBP 98.36

1

Aico EI3014EF Eco-Fit Pack - Heat Alarm - 230V with 10 Year Rechargeable Lithium Back-Up

Aico EI3014EF Eco-Fit Pack - Heat Alarm - 230V with 10 Year Rechargeable Lithium Back-UpThe Ei3014EF is an Eco-fit pack containing ten Ei3014 mains powered Heat Alarms with 10 Year Rechargeable Lithium Back-up.Eco-fit packs are more environmentally friendly through the use of minimal packaging no easi-fit bases screw packs or dust covers. All packaging is fully recyclable.Key FeaturesEco-fit pack containing ten Ei3014 Heat AlarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseHeat sensor - responds to heat build-up from large flaming firesMains powered with rechargeable lithium Back-up

GBP 758.82

1

Aico Ei630iRF RadioLINK Heat Alarm - 10 Year Lithium Battery Powered with AudioLink

Aico Ei630iRF RadioLINK Heat Alarm - 10 Year Lithium Battery Powered with AudioLink The Ei630iRF Heat Alarm is powered by a lithium primary battery and is activated by heat from a fire not smoke. This makes it ideal for kitchen installations where smoke alarms are prone to nuisance alarms. The thermistor will trigger the alarm when the activation temperature of 58C is reached.Built-in RadioLINK TechnologyThe Ei630iRF Heat Alarm has built-in RadioLINK technology and is able to wirelessly interconnect with any other RadioLINK products.Built-in AudioLINK TechnologyThis second iteration of the award-winning AudioLINK technology makes it simple to get real-time data from the Ei630iRF Heat Alarm via the AudioLINK app. The App generates a simple to read colour-coded report giving information on a range of alarm data such as alarm activations sensor status and record of testing.Battery and LifespanThe Ei630iRF is a battery powered Heat Alarm that contains a sealed in lithium battery that will last for the full 10 year life of the alarm.Key FeaturesHeat sensor responds to heat build-up from large flaming fires triggers at 58C10 year lithium battery poweredLarge test button and twist on base with an anti-tamper locking option.RadioLINK wireless interconnectionKitemarked to BS 5446-220035 year guarantee

GBP 100.98

1

Aico EI3024EF Eco-Fit Pack - Multi-Sensor Fire Alarm - 230V With 10 Year Rechargeable

Aico EI3024EF Eco-Fit Pack - Multi-Sensor Fire Alarm - 230V With 10 Year RechargeableThe Ei3024EF is an eco-fit pack containing ten Ei3024 mains powered Multi-Sensor Fire Alarms with 10 Year Rechargeable Lithium Back-up.Eco-fit packs are more environmentally friendly through the use of minimal packaging no easi-fit bases screw packs or dust covers. All packaging is fully recyclable.The Ei3024 Multi Sensor Fire Alarm is built on the same high quality reliable and proven technology that all Aico Alarms are renowned for but contains the latest high-tech enhancements making it the most effective domestic fire alarm on the market.Key FeaturesEco-fit pack containing ten alarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseMains powered with rechargeable lithium back-up

GBP 779.54

1

Aico EI3028EF Eco-Fit Pack - Multi-Sensor Heat amp CO Alarm - 230V With 10 Year Rechargeable

Aico EI3028EF Eco-Fit Pack - Multi-Sensor Heat CO Alarm - 230V With 10 Year RechargeableThe EI3028EF is an eco-fit pack containing ten EI3028 mains powered Multi-Sensor Heat CO Alarms with 10 Year Rechargeable Lithium Back-up.Eco-fit packs are more environmentally friendly through the use of minimal packaging no easi-fit bases screw packs or dust covers. All packaging is fully recyclable.The Ei3028 Multi-Sensor Heat Carbon Monoxide CO Alarm contains our tried and tested thermistor heat sensor and our proven electrochemical CO sensor.Key FeaturesEco-fit pack containing ten alarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseMains powered with rechargeable lithium back-up

GBP 1172.57

1

Aico Relay Module with 5A Relay amp Rechargeable Back-up Ei128RBU

Aico Relay Module with 5A Relay Rechargeable Back-up Ei128RBUThe Ei128RBU is a Relay Module that runs on a 230V AC mains power and has built-in tamper-proof Lithium cells that act as a battery back up in the event of mains failure. These rechargeable lithium cells are designed to have a 10-year life and outlast the life of the module itself whilst providing up to 2 months of operation without mains power.The Module has a set of Volt free contacts Normally Open and Normally Closed as standard but can be configured to give a 230V output or a 24V output using an external 24V supply.Any combination of30002110e160e 140RC or 260RC Series alarms can be used up to 12 including the Relay.The Module is designed to fit underneath any smoke or heat alarm. However a cover is supplied if there is a need for siting the unit remotely.The Module has additional trunking knock outs for ease of wiring.The Module can give a Continuous or pulse output. The pulse output will switch back the Relay contacts to their original state after 5 seconds operation.Operation of the Ei128RBUOn receiving a signal form the alarm system the Relay contacts will be operated causing a signal to be sent to the device to which it is connected.The Ei128RBU can be used to switch into a range of devices ranging from warden call systems to panel systems.When modified for a 230V or 24V output they can operate a range of different devices.The Module can be switched to give a pulse output or continuous output for different applications.Technical Specification The Relay is designed to operate whilst the alarm system is sounding to signal devices such as panels warden call systems nurse call systems etc. When any of the interconnected alarms sound the signal will cause the relay contacts to switch.The Relay runs on 230V AC mains power and has built in tamper proof Lithium cells that act as a battery back up in the event of mains failure. These rechargeable Lithium cells are designed to have a 10 year life and outlast the life of the module itself whilst providing up to 2 months of operation without mains power. It operates on receipt of a signal form the interconnect line of a smoke heat or CO alarm.Volt-free contacts Normally Open or Normally Closed rated up to 240V AC 5 Amps making it suitable for use with a wide range of AC or DC voltages.Any combination of 3000 2110e 160e 140RC or 260RC smoke heat or CO alarms can be interconnected to a maximum of 12 units in total 1 x Ei128RBU counts as one unit.The Ei128RBU is designed for siting under one of the smokeheat alarms listed above. However a cover is supplied if installing remotely or with 260 series CO alarms.More than one Relay can be used in a set of interconnected alarms on the condition that no more than 12 units are used in the system 1 x Ei128RBU counts as one unit.Fitted with a 4 way connector block for ease of wiring.The Relay can be set for continuous or pulse operation through a manual switch when in pulse operation mode the Relay contacts will automatically switch back to their original state after 5 seconds.Features 3 x 25mm trunking knockouts for surface wiring and centre knockout for recess wiring.Dimensions of unit 135mm diameter x 20mm depth.Weight inclusive of packaging 265g.Manufactured in Ireland.Key FeaturesFor use with 2100 160RC and 140RC alarmsRechargeable lithium battery back-upVolt free contacts as supplied for multiple useCan be configured to switch a 230V or 24V deviceTrunking knock-outs for easy and neat wiringAdditional connectors for ease of wiringContinuous or pulse operationFits discreetly behind any smoke heat alarm5 Year Guarantee

GBP 71.82

1

Aico Relay Module with 5A Relay Mounts under 2100 160RC amp 140RC Alarms Ei128R

Aico Relay Module with 5A Relay Mounts under 2100 160RC 140RC Alarms Ei128RThe Ei128R is a mains powered Relay Module that triggers external devices such as a strobe light or telecare deviceif the alarmsin the propertyactivate.Compatible with the3000Ei2110e Multi-Sensor Fire Alarm160e Seriesalarms and the 140RC SeriesThe Module has additional trunking knock outsto make as easy to install as possibleand is designed to fit underneath the space of easy-fit or RadioLINK base. However a cover is supplied if needed and containsa set of volt-free contacts as standard.The Relay module can beconfigured to give a 230V output or a 24V output using an external 24V supply.Operation of the Ei128ROn receiving a signal from the alarm system the relay contacts will be operated causing a signal to be sent to the device to which it is connected.The Ei128R can be used to switch into a range of devices ranging from indicating lights to magnetic door handles.The module can be switched to give a pulse output or continuous output for different applications.Technical SpecificationThe Relay is designed to operate whilst the alarm system is sounding to signal ancillary devices such as door closers extractors remote sounders etc. When any of the interconnected alarms sound the signal will cause the relay contacts to switch.The Relay is mains powered and operates on receipt of a signal from the interconnect line of a smoke heat or CO alarm. The relay does not operate if mains power is not present.Volt free contacts Normally Open or Normally Closed rated up to 240V AC5 Amps making it suitable for use with a wide range of AC or DC voltages.The Ei128R is designed for siting under one of the smokeheat alarms listed above. However a cover is supplied if installing remotely or with 260 series CO alarms.More than one Relay can be used in a set of interconnected alarms on the condition that no more than 12 units are used in the system 1 x Ei128R counts as one unit.Fitted with a 4 way connector block for ease of wiring.The relay can be set for Continuous or Pulse operation by operation of a manual switch when in Pulse operation mode the relay contacts will automatically switch back to their original state after 5 seconds.Features 3 x 25mm trunking knockouts for surface wiring and centre knockout for recess wiring.Dimensions of unit 135mm diameter x 20mm depth.Weight inclusive of packaging 170g.Manufactured in Ireland.Key FeaturesFor use with the 2100 160RC and 140RC series alarmsVolt free contacts as supplied for multiple useCan be configured to switch a 230V or 24V deviceTrunking knock-outs for easy and neat wiringAdditional connectors for ease of wiringContinuous or pulse operationFits discreetly behind any smoke heat alarm5 Year Guarantee

GBP 43.28

1

Aico EI3018EF Eco-Fit Pack - CO Alarm - 230V With 10 Year Rechargeable Lithium Back-up

Aico EI3018EF Eco-Fit Pack - CO Alarm - 230V With 10 Year Rechargeable Lithium Back-upAico EI3018EF ECOFIT 10 Pack of Carbon Monoxide Alarms. The eco-fit range is available across the 3000 Series of single and multi-sensor alarms offering the same renowned technology and high quality.The Ei3018 Carbon Monoxide Alarm has a high performance proven electrochemical sensor to monitor Carbon Monoxide CO levels in the household. The sensor is individually calibrated and tested in Carbon Monoxide gas to ensure it is completely accurate in its detection.Key FeaturesEco-fit pack containing ten Ei3018 Carbon Monoxide AlarmsEnvironmentally friendly minimal packaging no easi-fit bases screw packs or dust coversAlarms slide on to any existing pre-installed easi-fit baseMains powered with rechargeable lithium back-up

GBP 895.92

1

Aico Switched Input Module Ei129

Aico Switched Input Module Ei129The Ei129 is a mains powered Switched Input Module with rechargeable lithium cell back up. It will triggers the alarmsin a system if anexternal device isactivated such as a sprinkler system.The Ei129 comes with a cover or can be mounted underneath an alarm.Operation of the Ei129When the volt-free contacts connected to the Switched Input Module are closed all interconnected smoke heat and CO alarms will sound.When the device triggering the Switched Input Module resets i.e. when the contacts switch back it will automatically reset and all interconnected alarms will cease sounding.Key FeaturesThis module triggers the alarmsin a system if anexternal device isactivated such as a sprinkler system.Mains powered with a rechargeable lithium cell back upConnects with the alarm system through a hard wire interconnectCompatible with the3000Ei2110e Multi-Sensor Fire Alarm160e Seies alarmsand the 140RC Series

GBP 46.00

1

Aico Plug-in RadioLINK module Ei200MRF

Aico Plug-in RadioLINK module Ei200MRFThe Ei200MRF is a module that fits into Ei208W battery Carbon Monoxide alarm so that the unit can use RadioLINK interconnection to link with other alarms. The module simply plugs into the designated slot in the base of the alarm head with flashing LEDs indicating that the module has been fitted correctly.As with other RadioLINK products the once the Ei200MRF module has been fittedthe alarmwill need to belinked into the alarm system or House Coded. View ourstep by step guide to House Coding here.Technical SpecificationSupply Voltage 3V lithium battery.RF frequency 868.499Mhz RadioLINK protocol.RF Power 10dBm.RF Protocol Proprietary RadioLINK using multi-path multi-repeater mesh architecture.RF Range 100 Meters in free air.System Size 12 RadioLINK devices max.Operating Temperature 0 to 40C. Storage 0 to 35C in a dry area.Humidity Range 15 to 95 relative humidity.IndicatorsBlue LED Typically RF transmission house code mode indicator code reset.Green LED Typically monitoring mode indicator alternating with blue LED to indicate monitoring success.Red LED Typically monitoring mode cancel alternating with blue LED to indicate monitoring failure.Dimensions Product 60mm x 30mm x 20mm.Weight 25g.Guarantee 5 years limited guarantee.Approvals CE certified EN 300220-2 Radio EN301489-3 EMC EN624792010 Safety.

GBP 74.56

1

Aico Ei3014 230v 3000 Series Heat Alarm

Aico Ei3014 230v 3000 Series Heat AlarmSuitable for detecting Heat in both the kitchen or garagethe Ei3014 Heat Alarm contains our tried and tested high-performance ThermistorHeat sensor. The Thermistor has been designed using a smaller thermal massproviding a faster alarm response when the trigger temperature of 58C isreached. Best for detecting heat build-up from large flaming fires it candifferentiate from smoke or steam to drastically reduce false alarms.The Ei3014 Heat Alarm is SmartLINK compatible Simply plugin an Ei3000MRF module for wireless interconnection data extraction andreal-time notifications of alarm activations and events via the SmartLINKGateway and Portal.The Heat Alarm contains AudioLINKtechnology which allowsyou to extract real time data from the alarm using its sounder directly to asmartphone or tablet via an App. A simple to read report is generateddisplaying details such as activation dates sensor status and alarm life thatcan be emailed to help form part of property records.The Ei3014 Heat Alarm is fully compatible with all otherAico alarms and accessories whether a system needs upgrading or an existingsystem needs expanding and works with either hard-wired RadioLINK or hybridinterconnecting systems.Key FeaturesContains a fast response Thermistor Heat sensorMains powered with a 10-year rechargeable lithium cellback-upAdd an Ei3000MRF SmartLINK module for wirelessinterconnection and data extractionCompatible with other Aico mains powered devicesBuilt-in AudioLINK data extraction technologyGrade D1 and compliant with Scottish legislationSupplied with an easy-fit base10 Year Guarantee

GBP 73.07

1

Aico Spare Key for Ei407 Call Point MCRSK

Aico Spare Key for Ei407 Call Point MCRSKThe MCRSK is a spare or replacement Singular Spare Key designed for use with the Ei407.

GBP 1.49

1

Brand

Merchant

Price (EUR)