688 results (0,24739 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Gender

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Ansell HyFlex 11-738 Work Gloves, Black, 1 Pair, Size 9

Ansell HyFlex 11-738 Work Gloves, Black, 1 Pair, Size 9

HyFlex 11-738 work gloves, black, 1 pair, size 9. Supplied = assembled. Surface material = polyurethane, nitrile. Size = 9. Colour = black. Conforms to = EN 420:2003 + A1:2009. Area of application = car industry, machinery and equipment, metal industry. Product type = cut protection gloves. High level of protection against cuts. Reinforced crook of the thumb for increased protection and a longer glove life. Extremely hardwearing. Made of water-based polyurethane for greater comfort and dexterity - solvent free. Certified according to Oeko-Tex Standard 100. INTERCEPT technology for extremely high cut protection. FORTIX technology prolongs glove life by making the reinforced crook of the thumb up to four times more hardwearing than standard gloves without any reinforcement.

GBP 63.99
1

Ansell EDGE 48-126 Work Gloves, Black, Pack Of 12 Pairs, Size 9

Ansell EDGE 48-126 Work Gloves, Black, Pack Of 12 Pairs, Size 9

EDGE 48-126 work gloves, black, pack of 12 pairs, size 9. Supplied = assembled. Surface material = polyurethane, polyester. Size = 9. Colour = black. Conforms to = EN 420:2003 + A1:2009. Area of application = car industry, oil and gas, machinery and equipment. Product type = mechanical/assembly gloves. Now with EN level 4 abrasion resistance, good tear resistance and a good grip for greater productivity. Conceals dirt and therefore reduces premature disposal. Seamless design for a high level of wear comfort, encourages the glove to be worn and therefore increases safety. Good abrasion and tear resistance, good grip, increased productivity. The black version (48-126) conceals dirt, ensuring gloves are not removed from use prematurely. Seamless design for a very high level of wear comfort, encourages the glove to be worn and therefore increases safety.

GBP 62.99
1

Ansell 15-554 Size 9, 0 Chemical Protection Gloves

Ansell 15-554 Size 9, 0 Chemical Protection Gloves

One of the only gloves suitable for handling strong organic solvents. Features: -Virtually inert in aromatic and chlorinated solvents -Comfortable anatomical glove with precurved fingers and winged thumb - easier to manipulate and less tiring to wear -Soft two-piece knitted liner. Cushions the hand and absorbs perspiration -Pre-curved fingers and winged thumb -Supported glove with interlock cotton liner Applications: -Cleaning furnaces, distillation pumps, valves or lines and crackers BTX process -Loading and unloading process equipment -Maintaining lab furniture and equipment -Transferring liquids and solids between vessels and tanks and process equipment -Unexpected leakages spills or other releases Industries: -Chemical -Life sciences

GBP 31.99
1

72x Ansell 16-650 Size 9, 0 Chemical Protection Gloves

72x Ansell 16-650 Size 9, 0 Chemical Protection Gloves

One of the only gloves suitable for handling strong organic solvents. Features: -Virtually inert in aromatic and chlorinated solvents -Comfortable anatomical glove with precurved fingers and winged thumb - easier to manipulate and less tiring to wear -Soft two-piece knitted liner. Cushions the hand and absorbs perspiration -Pre-curved fingers and winged thumb -Supported glove with interlock cotton liner Applications: -Cleaning furnaces, distillation pumps, valves or lines and crackers BTX process -Loading and unloading process equipment -Maintaining lab furniture and equipment -Transferring liquids and solids between vessels and tanks and process equipment -Unexpected leakages spills or other releases Industries: -Chemical -Life sciences

GBP 1007.28
1

Ansell AlphaTec 02-100 Work Gloves, White, Pack Of 12 Pairs, Size 9

Ansell AlphaTec 02-100 Work Gloves, White, Pack Of 12 Pairs, Size 9

AlphaTec 02-100 work gloves, white, pack of 12 pairs, size 9. Supplied = assembled. Surface material = LLDPE laminate film. Size = 9. Colour = white. Conforms to = EN 420:2003 + A1:2009. Area of application = life sciences, metal industry, chemicals industry. Product type = chemical gloves. Protection from a very wide range of chemicals and liquids. Each glove undergoes a 100% air tightness and water resistance test. Silicone free. Anatomical fit. Chemical resistant, 5 layer laminate gloves. Anatomical fit. A versatile glove that often forms a standard item of the equipment use for cleaning up spills or emergency responses, gives the wearer a sense of safety when working. Protection from a very wide range of chemicals and liquids. Areas of use including packaging and labelling, handling and cleaning tools, filling, mixing and loading raw materials. Each glove completes an individual air pressure test. AQL 0.065 (EN 374)

GBP 319.99
1

Ansell EDGE 48-929 Work Gloves, Black, Pack Of 12 Pairs, Size 9

Ansell EDGE 48-929 Work Gloves, Black, Pack Of 12 Pairs, Size 9

EDGE 48-929 work gloves, black, pack of 12 pairs, size 9. Supplied = assembled. Surface material = nitrile, Spandex, fibreglass, polyethylene. Size = 9. Colour = black. Conforms to = EN 420:2003 + A1:2009. Area of application = the Earth's outer atmosphere, car industry, glass industry, machinery and equipment, metal industry, transport. Product type = cut protection gloves. Good combination of cut protection, a firm grip and oil repellent properties. Very hardwearing. Double layer nitrile coating for dry hands and comfortable work with oily components and tools. Use in work areas contaminated by oil. Elastic knitted cuff for a tight fit. Seamless backing fabric with full nitrile coating. The full nitrile coating protects the skin from contact with oil. The roughened nitrile coating on the palm provides a better grip on oily objects. For a secure grip on small to medium sized sharp edged components covered with oil or lubricant. Compatible with EN 420 (general basic requirements) and EN 388 (mechanical risks)

GBP 199.99
1

Ansell HyFlex 11-735 Work Gloves, Black, Pack Of 6 Pairs, Size 9

Ansell HyFlex 11-735 Work Gloves, Black, Pack Of 6 Pairs, Size 9

HyFlex 11-735 work gloves, black, pack of 6 pairs, size 9. Supplied = assembled. Surface material = polyurethane, fibreglass, HPPE fibre, nylon, Spandex. Size = 9. Colour = black. Conforms to = EN 420:2003 + A1:2009. Area of application = car industry, machinery and equipment, metal industry, transport. Product type = cut protection gloves. Extremely high cut and abrasion resistance due to extremely strong fibres. The robust coating is abrasion resistant and extends the service life of the glove. High cut and abrasion resistance (ANSI level 4) The new cut resistant INTERCEPT yarn was tested to ensure it complies with and exceeds current industry standards. Developed by ANSELL, this technology offers the best level of cut protection in its class while also providing comfort and flexible finger movements. The coating on the palm surface enhances the grip and extends the service life of the glove in harsh work areas. The back of the glove is actively breathing. The grey coating conceals dirt when working in areas subject to pollutants.

GBP 163.99
1

Ansell AlphaTec 58-735 Work Gloves, Green, 6 Pairs, Size 9

Ansell AlphaTec 58-735 Work Gloves, Green, 6 Pairs, Size 9

AlphaTec 58-735 work gloves, green, 6 pairs, size 9. Supplied = assembled. Surface material = nitrile. Size = 9. Colour = green. Conforms to = EN 420:2003 + A1:2009. Area of application = car industry, chemicals industry, machinery and equipment, oil and gas, food processing, metal industry. Product type = chemical gloves. Optimised fit for higher level of dexterity with cut resistant backing fabric integrated into the nitrile coating and tactile sensation instead of double gloves. INTERCEPT Cut Resistant Technology for effective protection against injuries. Satisfies FDA regulations for contact with food. Excellent wet/dry grip, greater dexterity and less hand fatigue. High-vis backing fabric that indicates any damage to the glove and associated degradation of the level of protection from chemicals. Fold up barrier on the cuff to prevent drips falling on the forearms. Certified according to Oeko-Tex Standard 100. Nitrile barrier as effective protection against many frequently used chemicals. INTERCEPT Cut Resistance Technology for ISO C level cut protection. The ANSELL GRIP technology for handling wet or oily parts increases dexterity, provides a good grip and a high level of wear comfort.

GBP 199.99
1

Ansell HyFlex 11-542 Work Gloves, Black, 1 Pair, Size 9

Ansell HyFlex 11-542 Work Gloves, Black, 1 Pair, Size 9

HyFlex 11-542 work gloves, black, 1 pair, size 9. Supplied = assembled. Surface material = Kevlar, stainless steel, nylon, Spandex, nitrile. Size = 9. Colour = black. Conforms to = EN 420:2003 + A1:2009. Area of application = car industry, machinery and equipment, metal industry. Product type = cut protection gloves. High cut resistance. High level of dexterity. High wear comfort and light in weight. Design that conceals dirt for a longer service life. Contact heat protection level 1 in accordance with EN 407. Fibreglass, natural rubber latex and silicone free. The INTERCEPT cut protection technology provides effective protection from injuries. Lightweight design for comfort and dexterity. Helps ensure compliance with occupational health and safety laws. Longer product life due to an exclusive coating that conceals dirt and a high level of abrasion resistance. Suitable for a wide range of applications and many different types of risks. Eliminates the need to change gloves when switching between two different jobs. Temporary handling of hot objects up to 100 C. EN 420:2003 + A1:2009, Category III.

GBP 65.99
1

Ansell EDGE 48-919 Work Gloves, Red/Black, Pack Of 12 Pairs, Size 9

Ansell EDGE 48-919 Work Gloves, Red/Black, Pack Of 12 Pairs, Size 9

EDGE 48-919 work gloves, red/black, pack of 12 pairs, size 9. Supplied = assembled. Surface material = nitrile, polyester. Size = 9. Colour = black, red. Conforms to = EN 420:2003 + A1:2009. Area of application = car industry, building construction, machinery and equipment, metal industry. Product type = mechanical/assembly gloves. Good combination of a firm grip and oil repellent properties. Very hardwearing. Double layer nitrile coating for dry hands and comfortable work with oily components and tools. Elastic knitted cuff for a tight fit. Use in work areas contaminated by oil. Seamless backing fabric with full nitrile coating. The coating of the gloves protects the skin from contact with industrial fluids and oil. The roughened nitrile coating on the palm provides a better grip on oily objects. For a secure grip on small to medium sized sharp edged components covered with oil or lubricant. Compatible with EN 420 (general basic requirements) and EN 388 (mechanical risks)

GBP 103.99
1